E tender documents for Construction of divisional sports complex Jalgaon District Jalgaon

Amount

Earth work & Plinth Filling Work:- Clearing and grubbing road / ground land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Spec. No.:- MORTH 201

Excavation for Ground /roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Spec. No.:- MORTH 301

Excavation for roadway /ground in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. Spec. No.:- MORTH 301

Excavation for roadway/Ground in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. Spec. No.:- MORTH 301

Excavation for roadway in hard rock by controlled blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stocking as directed.(Inculding 50% Utilisation of useable Excavated material) Spec. No.:- MORTH 301

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Spec. No.:- MORTH 301

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. Spec. No.:- MORTH 309

Excavation for catch / side water gutters in Hard rock strata to the specified section including stacking the excavated stuff in a regular bund by chiselling and wedging and disposing of unsuitable or excess stuff as directed. Spec. No.:- MORTH 309

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec. No.:- Bd.A.1 Page One Number 259

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means Spec. No.:- Bd.A.3 Page One Number 259

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec. No.:- Bd.A.4 Page One Number 259

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 3.0 m To 4.50 m.) By Mechanical Means Spec. No.:- Bd.A.4 Page One Number 259

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.50 m depth). By Mechanical Means Spec. No.:- Bd.A.6 Page One Number 260

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift 1.50m to 3.0m depth). By Mechanical Means Spec. No.:- Bd.A.6 Page One Number 260

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift 3.0m to 4.5m depth). By Mechanical Means Spec. No.:- Bd.A.6 Page One Number 260

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 4.50 m to 6.0 m or upto required depth). By Mechanical Means Spec. No.:- Bd.A.6 Page One Number 260

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec. No.:- Bd.A.11 Page One Number 263

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No.:- As directed by Engineer incharge.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.:- MORTH 305

Transportation of material obtained from debries of various sort including necessary excavation/ loosing including loading, unloading and disposing as directed . (For 1.00 km lead)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. Spec. No.:- As directed by Engineer in charge.

Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) Spec. No.: As directed by Engineer in charge.

Sports Ground Subbase ,Synthetic Surface work & Equipments :- Supplying hard murum/kankar at the road site,including conveying and stacking complete. as per direction of Engineer-in-Charge.

Supplying soft murum at the road site, including conveying and stacking complete. as per direction of Engineer-in-Charge.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. as per direction of Engineer-in-Charge.

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. Spec. No.:- As directed by Engineer in charge

GARDEN SOIL:-Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 15 km. considered Excluding royalty.)

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material Spec. No.:- MORTH 401

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. Spec. No.:- MORTH 406

Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means. Spec. No: MORTH 502

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) Ref No.:- MORTH 503 SSR No. 3.31, Page No. 35

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm/ as specified in the dwg compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) Spec. No.:- MORTH 505

BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm/ as specified in the dwg compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant without SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) Ref No.:- MORTH 509

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. Spec. No.:- As directed by Engineer in charge

Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant Spec. No.:- MORTH 408

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant Spec. No.:- MORTH 408

Acrylic Cushion Systems:- Supply and applying of 5 layer acrylic Sports Coating for Basketball Court (ITF approved) finish layer of approved surface colour as directed by architects and engineer in charge etc complete. Cushion Layer As Below :- i) One Coat of Acrylic Resurfacer, ii)Two Layer of Cusion Coat, iii) One layer of Base colour , iv) One Coat of Sports Colour, v) Game line marking, Total Five Layer of Acrylic cushion And Game Line Marking with White Paint etc.Complete as per detailed Drawing & Instructions directed by Engineer in charge. Inculding loading, unloading,transportation, installation.Rates without GST but inculding all other taxes as applicable at the time of delivery ,With 5 year Product Guarantee. Make:-Laycold (USA), Premier Sports Coating(USA), Deco Turf(USA),Flexiten - Bytech Boya (Turkey) or other equivalent approved by ITF

Acrylic Cushion Systems:- Supply and applying of 8 layer ITF Approved Sports Coating for Tennis Court finish layer of approved surface colour as directed by architects and engineer in charge etc complete. Cushion Layer As Below :- i) One Coat of Acrylic Resurfacer, ii)Five Layer of Cusion Coat, iii) One layer of Base colour , iv) One Coat of Sports Colour with Sand, v) Game line marking, Total Eight Layer of Acrylic cushion And Game Line Marking with White Paint etc.Complete as per detailed Drawing & Instructions directed by Engineer in charge. Inculding loading, unloading,transportation, installation.Rates without GST but inculding all other taxes as applicable at the time of delivery ,With 5 year Product Guarantee. Make:-Laycold (USA), Premier Sports Coating(USA), Deco Turf(USA) or other equivalent approved by ITF

Providing & laying synthetic Athletic track (having a World Athletics approved product certified) with a minimum thickness of 15mm for Normal Stress Areas & 20-25mm for High Stress Areas, of finished surface (Full PUR) including survey , line out, track marking on the surface done by authorized IAAF person as per requirement / specification laid down by IAAF . The colour of the Synthetic Track must be Terra cota / or Preffered by the client IAAF approved. The Athletic Track surface to be spike resistant, multi layers, Multi component rubber, EPDM, Polymer resin system formed in situ by machine. All Component of the Synthetic Track like EPDM Rubber, SBR, Polymer (PU), Hardner etc. shall be procured only from the approved manufactues & contry of origin. The contractor shall test all material from IAAF accredited labortory to obtain class 2 IAAF certificate and all the charges for testing & obaing IAAF certificate borne by the contractor. all test results required according to DIN V 18035-6:2004-10. Synthetic Track Material, Country of Origin:-Amercia/Europe/ Australia only

IAAF Approved equipments Providing & Fixing Aluminium track Curbing with fixing arrangement having size 60 X 50 mm box type having weight 1 kg/ Rmt. Top held in place by 10mm tall ribed feet raised 10mm of the track surface for rapid drainage each section of curbing shall be milled to allow easy drop in or removed corresponding section annodized finished and IAAF certified.

Providing and fixing Hammer throwing circle / ring of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Shot put throwing circle / ring of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Take of boards alongwith plasticine indication boards and banking boards for long jump of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Take of boards alongwith plasticine indication boards and banking boards for triple jump of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Stop board for shot of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Throwing safety cages with required poles and net incl. the ground fixing sleeves and ground hooks etc for discus and hammer throw of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Aluminium fixing arrangement to fix hurdles for water pit/jump in steeple chase along with hurdle of IAAF approved. Spec. As directed by engineer in charge

Providing and fixing Pole vault box along with blanking board of IAAF approved.Spec. As directed by engineer in charge

Supplying and filling of Silica Sand in sand pit of approved quality including cost and conveyance of all materials and labour charges to the site to fill the sand in pits. Spec. As directed by Engineer charge

Football Field Item Football Goal Post (All As per FIFA Requirement for premier Tournament) Supply and installtion of Uprights & Crossbars made from 102mm x 112mm reinforced aluminium with double recess for flush fitting fixings. Reinforced welded aluminium corner joints for improved aesthetics and superior strength, with laser cut internal fixing for exceptionally accurate joints. Injection moulded toughened nylon net clips that won't deteriorate over time. Lock-in T-bar to allow for easy storage of the bottom net bar against upright for pitch maintenance. Reinforced net support system prevents bowing under intense tension. New, heavy duty ratchet winch and webbing strap allows for high-class net shape with the inclusion of a failsafe wire providing 100% security during matches. Lock-in bottom net bar 38mm diameter aluminium bar with ground secure key lock mechanism complete with 4 sockets and whitePolyester powder coated of size 7.32m x 2.44m Set = 2 Goals with 4 x 460mm deep sockets, and net etc. all complete as per FIFA Specification.

Supplying, Deliver, stacking on site dust free stone aggregate of size 6-10 mm including loading & Unloading etc.complete. as directed by the engineer in charge/ consultant.

Supplying, deliver , stacking on site medium Fine sand with Sandy loam suitable for Natural turf rootzone as per specification including Transportation, loading, unloading, royalty etc. Complete as directed by engineer in charge. (NOTE: The Sand for Turf construction is as follow Coarse sand: 60% of the material must fall in the 0.5 to 1mm range. Medium Sand: 0.5 to 0.25mm & Fine Sand 0.25 to 0.15 mm not more than 20%. Very find Sand 0.15 to 0.05 mm Maximum permissable is 10% . Silt and Clay <0.05mm Not more than 5%.) As directed by consultant.

Supplying, filling, spreading & leveling coarse fine Sand/aggregate (For cricket Pitch)of size range 1.5mm to 2mm in recharge pit/ground, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.

Supplying, Deliver, stacking , Sprading & leveling on site Brickbat including loading & Unloading etc.complete. as directed by the engineer in charge/ consultant. (For Cricket Pitch)

Supplying & Uniformly Spreading 1kg /Sqm of Organic fertilizer with micro- organisms, macro & micro nutrients, with every square meter. Thereafter mix the organic matter with top 50mm to 100mm rootzone layer sand by rotivator, to have a uniform rootzone mix. Provide three applications each of 1kg/sqm. fertilizers good for the Bermuda grass,its development and retention of color in all season. Spec. As Directed by engineer in charge

Finishing Levels: Once the root zone is spread over the sub base rectify undualtions if any, level and compact with water, to keep the root zone moist uniformaly. Spec.:- As directed by Engineer in Charge.

Source, Supply , Deliver , Plant Bermuda SODS- Tifff- dwarf variety of grass on site as per Cricket field grass requirement and directed by engineer in charge including all required Diamonium phosphate, pesticider & Chemical all over FOP etc. complete. Spec.:- As directed by Engineer in Charge.

Supplying and spreading geofabric filter layer of Geotextile of Polypropylene multifilament woven to the line, level and grade with pore size less than 0.075 mm and permeability greater than 9.0 litre/Square Metre/second confirming specification IS:1969 and ASTM standard including conveying to the site, joining and stitching with proper overlap and laying at excavated surface in tidal condition as directed by Engineer- in- Charge etc. complete. Spec. No.:- As directed by Engineer in charge

Providing and laying perforated PVC 160 mm dia pipe in proper line,leveland slope including necessary material fitting etc. complete. Spec. No.:- As directed by Engineer in charge

MAINTENANCE OF FOOTBALL FEILD: After planting the Turf grass, thereafter it will be maintained and manicured upto and including full Grwoth of Turf & handed over to client and therafter for 12 Months or end of Defect liability period. Maintenance includes mowing, irrigation, fertilising, fungicide application, weed management , aeration, maintaining levels, scarifying , irrigation management etc as directed by the consultant .(including required NPK , Micro nutrients, Fungicide,Bio organic fertilisers & machinary for maintenance) etc. all complete in all aspect to maintain the football field. Spec. As directed by engineer in charge.

MAINTENANCE OF CRICKET FEILD: After planting the Turf grass, thereafter it will be maintained and manicured upto and including full Grwoth of Turf & handed over to client and therafter for 12 Months or end of Defect liability period. Maintenance includes mowing, irrigation, fertilising, fungicide application, weed management , aeration, maintaining levels, scarifying , irrigation management etc as directed by the consultant .(including required NPK , Micro nutrients, Fungicide,Bio organic fertilisers & machinary for maintenance) etc. all complete in all aspect to maintain the football field. Spec. As directed by engineer in charge.

Safety Sports Fencing System 3M Height:- Description: Supply & Intallation of Safety Sports Fencing System of height 3Mtr. with 2 Gate of size 1.5 m Wide X 2.4M Height. Technical Specification: it includes 3 Mtr High Dia 88 mm (OD) 3 mm thick MS pipes, Green powder coated factory finished post vertical post fixed on existing 400 x400 x600 mm reinforced concrete foundation. Fastening with anchor fastener on reinforced concrete wall at 4 mtr centre to centre distance, ф 88 mm (OD) 2 mm thick MS pipe HORIZANTAL post, Horizontal post will be factory finished Green powder coated installed at Top and Bottom location for 3 mtr Height with the help of special connectors. 2.5 +1mm Pvc Coating galvanized steel chain link fence fabric mesh of size 50 mm X 50 mm x 3 mtr , fixed to vertical post and two horizontal post with the help of 3 mm thick extruded Aluminium flat with green powder coated finish and self-tapping screw. 3 mm thick special Connectors made from pressed steel and powder coated finish for connecting Vertical and horizontal post by using M12 X 90 carriage bolt at every joint and corner of horizontal and vertical post without welded joints for easy installation and removable. Complete, Entire material goes through pretreatment via sandblasting, Powder coating is done with high quality PP powder coating (Jotun PP powder) and finally tests such as scratch test, DP test (confirming coating thickness) and salt spray test are done to ensure quality check. The safety fence system sustain impact of the ball, inner side of fence be free from any projected parts/joints.

Providing and Fixing MS Gate of clear opening size 1.5m wide X 2.0m depth with G.I. chain link of size 50 x 50 mm 10 guage thick and fixed with vertical M.S. Channel of 150 x 75 x 6 mm size for a Box of 150mm X 150mm size embadded in C.C. block of M20 grade of min. size 600 x 450 x700 mm or as per dwg with iron bar 16 mm dia. as hold fast including welding chainlink with outer MS frame 50X50X6mm and internal horizontal M.S. pipes(25X50X6 & 19X19X3) as per detailed drawings for fixing the chainlink including 2 coats of oil painting & 1 coat Primer to Structural member & Chainlink etc. complete. As per detailed dwg & As directed by engineer in charge.

Supplying and fixing of aluminum goal post for Hockey as per drawing, design and specifications approved by FIH including all fittings and net etc. all complete as per direction of the engineer-in-charge.

Supply & fixing of 30X30mm X3mm thick HDPE safety sports net including all required fixtures and material etc. complete for hockey ground as directed by engineer in charge.

Supply & inspallation of Equipments : 1) One set of fixed basketball poles and nets as per FIBA Requirment & as per dwg. There shall be two backstop units, one place at each end of the playing court and each consisting of following parts: i. backboard ii. basket ring with ring mounting plate iii. basket net iv. backboard supports structure v. Padding etc. complete as directed and as per standard mentioned in dwg.

Supply & installation of Cast aluminium alloy with green / Black powder coated finish Tennis post from approved manufacturer including post caps, gear housings, flush mounted, removable handle, jam-free cable tensioning hardware system & superior hardened gears and ground sleevesp and 42'long Tennis Net consist of 3mm High Tensile Braided Twine black/white PVC B4nding 2 t/2" on net Side & Bottom Headline Cable - 6mm PVC Coated Cable. With Loop & Pin Finish etc. complete, as per the direction of Engineer in charge

Voleyball Post - Made of Round Pipe Weight 120 kg each side with vollyball net fixing including required foundation work for the same etc complete as directed by engineer in charge

Kho- Kho Ground Post - Made of Powder coated MS Round Pipe each side including required foundation work for the same etc complete as directed by engineer in charge

Handball Goal Post - Provisding & fixing Handball goal post as per the requirement of IHF specification (International Handball Federation) including net fixing & required foundation work for the goal post etc complete as directed by engineer in charge

Ballbadminton Post - Made of powder coated MS Pipe each side with net fixing including required foundation work for the same etc complete as directed by engineer in charge

Providing and fixing 36 mm thick Styrene Butadiene Rubber(SBR) with EPDM (Ethylene Propylene Diene Monomer) insitu rubber flooring out of total Thickness of 36 mm the First Layer of 30 mm thick should be of Black SBR Second Layer of 6 mm thick should be with Color EPDM.The above flooring of EPDM should be done with different color grains as per design approved by engineer .and it should be laid Concrete The glue used should be of (1). PU Binder, it's glue which gives bonding to Rubber and should be in Transparent Color, USP of it should have low UV minimal color change EDPM Granules. (2). Butyl Acetate, its again a kind of Glue which gives bond in-between different layers. The quoted should be inclusive of above glue of transportation etc completely required for satisfactory completion of work. Note:- SBR Buffing (Styrene-Butadiene Rubber), it should be in Black Color and should have excellent weather properties (Ethylene Propylene Diene Monomer), should be in Multi Color Options , its should be Synthetic Rubber which should have water resistance, durable, UV stable high & consistent quality product as per the manufacture's specification including necessary Slope,finishing,etc all complete as directed by the Engineer-in-Charge

Malkhamb - Provisding & fixing Malkhamb post including foundation work for the post etc complete as directed by engineer in charg. The pole should be straight made of teak or sheesham wood & should be smeared with castor oil, standing 2.6 metres (8.5 ft) in height above the ground with a circumference of 55 centimetres (22 in) at the base. It gradually tapers to a circumference of 35 centimetres (14 in) at the top. Neck & top should be as per standard requirement.

PCC & RCC Work Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd. E. 1 Page One Number 287

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.E.2 Page One Number 288 andB.7 Page No 38

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.E. 3/Page One Number 288/I.S.456 (2000)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.3 Page One Number 298 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.3 Page One Number 298 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.3 Page One Number 298 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.5 Page One Number 300 andB-7,Page No 38.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.5 Page One Number 300 and B.7,Page.One Number 38

Ground Floor

First Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.5 Page One Number 300 and B.7,Page.One Number 38 (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.6 Page One Number 300 and B.7, Page One Number38

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.8 Page One Number 302 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.8 Page One Number 302 and B.7, Page One Number38

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.11 Page One Number 304 and B.7, Page One Number 38

Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd.F.9 Page One Number 303 and B.7, Page One Number38

Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No.:- Bd. F. 13 Page One Number 305/I.S. 456 (2000

Ground Floor

First Floor

Second Floor

Providing and laying in situ cement concrete M30 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.(With SCADA) Spec. No.:- As directed by Engineer incharge

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement/flooring including all materials and labour complete. Spec. No.:- MORTH 602.5

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.:- Bd.F.17, Page One Number 306

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Structural Work & Roofing Work:- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No.:- Bd.C.2 Page No. 275

Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete Spec. No.:-Bd.C.6 Page One Number 275

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Spec. No.:- Bd.C.8 Page One Number 278

Ground Floor

First Floor

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No.:- Bd.C.3 Page One Number 275

Ground Floor

First Floor

Second Floor

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge. Spec. No.:- B-18 Page One Number 78

Ground Floor

First Floor

Fourth Floor

Standing Seam Galvalume Roofing :- Supply and Installation of concealed fix/standing seam non screwing type self supported reverse T clip type free flowing Concealed fix roofing system with nominal 430 mm effective cover width & two major corrugations of nominal 65 mm depth. The flat portion of the panel shall have three longitudinal flutes parallel to major corrugations at pitch of nominal 107.5 mm center to center spacing for strength.(Considered to be factory/ site roll formed.)The profile should have 3micro ribs mini ribs to provide additional strength at the pan, and material test certificate (MTC) to be submitted for each lot supplied at site. NOTE: The galvanised iron colour coated base coils for production of roofing sheets will be of nominal 0.5 mm Total Coated Thickness (TCT), Hi-strength steel with min. 300 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per ASTMA_755_2003G_80_550 Class1 & IS 15961 (2012) Galvalume AZ150 (Min. 150 gms/sq.mt total on both sides) with Regular modified quality paint coat . The paint shall have a total coating thickness of nominal 25 μm, comprising of nominal 18-20 μm exterior coat on top surface and nominal 5-6 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority. The steel manufacturer's test certificate for the chemical and mechanical properties of steel must be submitted for approval by the concerned authority prior to installation. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material.System should accompany with The support aluminium clip shall be manufactured from extruded aluminium alloy 6061 T6 in accordance with BSEN 485 part 2. Each aluminium clip shall be coupled with a 5mm thick black polyamide thermal barrier base pad. and fixed on Aluminum clip and which is fixed to steel with SS-304 screwsand standard accessories like Foam Fillers, Drip Angles to ensure weather tightness.Complete installation to be done by specialized authorised team/installer of the manufacturer with safety & Site engineer. INSULATION LAYER:The insulation shall be 125 mm thick (laid in two layers of 75 & 50 mm fiberglass with minimum density 24 kg/m3 or Rockwool with minimum density 64 kg/m3 to achieve minimum U value of 0.26 W/m2 K,and minimum R- Value of insulation -3.70 sqm-k/w as approved by Engineer-In-Charge. SUPPORT SUB STRUCTURE: Galvanised steel Top hats with saddles of min. thickness of 1.6mm and to be installed over the VCL, liner sheet, with min. yield strength of 240 Mpa and with min 80GSM Galvanizing coat to be fixed with Steel fasteners. BOTTOM LAYER: Supply of colour coated sheet of nom.1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 202 mm centre-to-centre. The end rib shall be designed for anticapillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.5 mm Total Coated Thickness (TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as perASTMA_755_2003G_80_550 Class1 & IS 15961 (2012) (Min. 150 gms/sq.mt total on both sides) with Regular modified quality paint coat . The paint shall have a total coating thickness of nominal 25 μm, comprising of nominal 18-20 μm exterior coat on top surface and nominal 5-6 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority. The steel manufacturer's test certificate for the chemical and mechanical properties of steel must be submitted for approval by the concerned authority prior to installation. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. Spec. No.:- As directed by Engineer in charge. Rate including transportation, loading, unloading as per drawing including all other taxes etc excluding G.S.T. (all floor lift) work will be carried out as per drawings & instruction site engineer incharge/ architect . specification as directed etc complete.

Supply & Installation of Flashings and trims:- Providing & Fixing Flashings manufactured from the same material (Galvalume AZ150) which is used for main roofing & cladding applications.The sheets will be of nominal 0.5 mm Total Coated Thickness (TCT), Hi-strength steel with min. 300 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per ASTMA_755_2003G_80_550 Class1 & IS 15961 (2012) Galvalume AZ150 (Min. 150 gms/sq.mt total on both sides) with Regular modified quality paint coat . The paint shall have a total coating thickness of nominal 25 μm, comprising of nominal 18-20 μm exterior coat on top surface and nominal 5-6 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by the engineer in charge. Rate including transportation, loading, unloading as per drawing including all other taxes etc excluding G.S.T. (all floor lift) work will be carried out as per drawings & instruction site engineer incharge/ architect . specification as directed etc complete.

Tensile Fabric roofing:- Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure ( MS built-up section :- Rolled section & plates confirming to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL, conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto 10mm ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate connectors, pinion joints, plates, hollow sections including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In- Charge and incorporation of Engineer-In-Charge's comments on same, transportation from fabrication yard, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade. The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure must be provided as per conceptual drawings of Tensile fabric profile, including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints,bases of columns and high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure to be with one coat of epoxy primer and two coats of Polyurethane paint on steel work at all locations prepared by sand blasting in required minimum 210–250-micron DFT (dry film thickness) for each coat as specified in specification. Vendor to provide membrane analysis reports and cutting pattern development drawings for fabric on Project Start. SITC of Tensile membrane fabric type II having prestress Technologyto avoid the elongation of the Fabric. Fabric should be having minimum weight of 950 gsm, both side PVDF coat,Total Thickness- 0.72mm, Acoustic Performance-Weaking Index- 13dBA- SO717-1, Light Transmission-5% UV Transmission 0%,with tensile strength minimum 420/ 400 daN/ 5cm, minimum tear strength 55/ 50 daN as per manufacturer's specification and 15 year manufacturer Limited warranty.Flame Retardancy M2/NFP92-507,Including cutting, welding and cables, plates and necessary hardware for fixing the fabric as per approved shape. Membrane shall be cut and manufactured with high frequency PVC welding machine; cost of all materials completes as per directions. Quality in conformity with ISO9001,Environmental communication in conformity with ISO14021. Makes- Serge Ferrari or Equivalent. The work is to be executed as per technical specification and direction of Engineer-In-Charge.Second Floor

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs. Spec. No.:- As directed by Engineer-in-charge

Ground Floor

Second Floor

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Spec. No.:- Bd.H.1 Page One Number 329

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec. No.:- Bd.G.5 Page One Number 315

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No.:- As director by engineer in charge and BDG-2 and 5

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec. No.:- As director by engineer incharge andBDG- 2 and 5

Ground Floor

First Floor

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. Spec. No.:- Bd. G. 7 Page 316

Ground Floor

First Floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Spec. No.:- As directed by engineer in charge

Ground Floor

First Floor

Second Floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Spec. No.:- As directed by engineer in charge

Ground Floor

First Floor

Second Floor

Waterproofing Work:- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Spec. No.:- As directed by Engineer in charge At First Floor Level

Ground Floor

First Floor

Second Floor

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. Spec. No.:- As directed by Engineer in charge

Ground Floor

First Floor

Second Floor

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge)

Ground Floor

First Floor

Second Floor

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) Spec. No.:- Bd.J.2 Page Number 355

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) Spec. No.:- Bd.J.2 Page Number 355

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers perforated on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Plastering Work Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. No.:- Bd.L.1 Page One Number 367

Ground Floor

First Floor

Second Floor

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Spec. No.:- Bd.L.4 Page No. 368

Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Spec. No.:- As directed by Engineer incharge.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Spec. No.:- As directed by Engineer In Charge

Ground Floor

First Floor

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. Spec. No.:- As directed byEngineer in Charge.

Ground Floor

First Floor

Second Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec. No.:- Bd.L.7 Page One Number 369

Ground Floor

First Floor

Second Floor

Providing weathered pointing with cement mortar 1:3 for stone/ Brick masonary including scaffolding and curing etc. complete.

False Ceiling Work Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as per Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kilograms/M2 and minimum pull out strength of 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

METAL BAFFLE CEILING : Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black & White).. The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps..SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U – profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron. U- Profile to be connected to each other using U –Profile Splice. The U- profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate. Spec. No.:- As directed by Engineer in charge

Ground Floor

First Floor

Second Floor

Glass Reinforced Gypsum (GRG) board ceiling:- Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks

Ground Floor

First Floor

Second Floor

Design,Fabrication & Installation of 4 mm thick exterior grade PVDF coated aluminium composite panels ceiling of having 0.5 mm thick aluminium PVDF coated sheet available in standard colours + 3 mm core material + 0.5 mm aluminium sheet chemically treated ( back sheet ) bent as per requirement, fitted on anodised aluminium necessary coated rectangular grid work, hardware, fixtures,brackets, anchor, fasteners of S.S. 304 grade etc. complete duly sealed with weathering silicon manufactured by DOW corning / G.E. silicon for circular columns and curved beams etc complete. All section for supporting ACP shall be of size 50 x 50 x 2.5 mm at a distance of 1.2 m Horizontally & Vertically or as per requirement of the design shop drawing has to be submitted by the contractor for the approval of structural Engineer. (Ceiling)

Ground Floor

First Floor

Second Floor

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. Spec. No.:- As directed by Engineer in charge.

Flooring & Dado Work Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (11.41.3) Size of Tile 800x800 mm

Ground Floor

First Floor

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size:- Size of Tile 800x800 mm

Ground Floor

First Floor

Second Floor

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (11.41.3) Size of Tile 800x1600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (11.46.3) Size of Tile 800x800 mm

Ground Floor

First Floor

Second Floor

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590mm to 605mmx 590mm to 605mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla)of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Spec. No.:- Bd.M. 12 Page No.385

Ground Floor

First Floor & Above

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete Spec. No.:- Bd.M. 12 Page One Number385

Ground Floor

First Floor

Second Floor

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. Spec. No.:- Bd.M.12 Page One Number 385

Ground Floor

First Floor

Second Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No.:- Bd.M. 3 B/PageOne Number 380

Ground Floor

First Floor

Second Floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No.:- Bd. M.22B/Page One Number 390

Ground Floor

First Floor

Second Floor

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No.:- Bd.M.3 Page One Number 380

Ground Floor

First Floor

Second Floor

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. Spec. No.:- As directed by Engineer in Charge

Ground Floor

First Floor

Second Floor

Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer Spec. no.:- Bd. M-3 page One Number 380

Providing and laying machine cut and mirror polished approved coloured ITALIAN MARBLE SLAB/Flooring approved size, 20 mm +/- 2 mm thick of approved quality with approved qality, Italian marble inlays for flooring in required pattern on a bed of 1:4 cement mortar 25- 30 mm average thickness including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and cleaning complete. ( Basic rate of ITALIAN marble Rs. 6450/-per Sq.M)

Ground Floor

First Floor

ITALIAN MARBLE CLADDING Providing and fixing machine cut and mirrorpolished approved coloured ITALIAN MARBLE SLAB with inlays of approvedsize,20mm +2mm thk. Of approved quality for required patternon a bed of 1:4 CM 25mm average thickness including neat cement float,filling joints with neat coloured pigment, curing, polishing and cleaning etc.complete. ( Basic rate of ITALIAN marble Rs. 6450/-per Sq.M)

Ground Floor

First Floor

Providing and fixing on site VENEER FINISH WALL PANELING made by using approved quality seasoned T.W. framing of 38 x 25 mm at approximately600 x 450 mm center to center or as per site conditions and covered by12 mm thick marine ply generally confirming to I.S.303 /I.S.710-1980 finished with 3 mm thick group match veneer of approved quality with groove pattern including all necessary end mouldings, moulding pattern, and melamine polish. Antitermite treatment toplywood and woodwork etc.including all leads & lifts complete as perArchitects detailed drg. & design and as instructed by The Engineer In Charge (Basic Veneer Rate Rs.75/-per sft)

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete Spec. No.:- As directed by Engineer-in-charge

Ground Floor

Second Floor

Bamboowood 14 mm thick tile flooring including quater round, door reduces and plywood- Providing & fixing in position Phenol bonded Epitome Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (MBTPC). The flooring shall be fixed with tongue and groove interlocaking system, with plywood of mr grade of 18mm thickness as base and underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer of size 1900mm x 44mm, wherever required. The Epitome Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge. Spec. No.:- As directed by Engineer in charge

First Floor

Bamboowood 14mm thick wall Skirting - Providing & fixing in position Phenol bonded Epitome Bamboowood in wall skirting with planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building materials & Technology Promotion Council (BMTPC). The skirting shall be fixed SS screws & rawl plugs, over underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface. The Epitome Bamboowood planks shall have minimum density 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge Spec. No.:- As directed by Engineer in charge

First Floor

ACCESS FLOORING -Providing & fixing anti-static flooring at server room with pedestal supports & complete.

Supply & Installation of 3.45 mm thick hetrogeneous PVC Vinyl flooring of certified by EN( Europian Standard) 14904, in rolls form of 2m wide and 23m long, total weight 3295 g/m2, Shock Absorption as per EN 14808 - 6%, Friction as per EN 13036-4 - 80 to 110, Vertical deformation as per EN 14809 - 0.4mm, Vertical Ball Behaviour as per EN 12235 - 98%, 100% recyclable, VOC emission after 28days lower than ≤10μg/m3, Phthalate Free. The laid flooring shall comply the fire rating CFL S1 as per EN 13501-The joints should be thermo welded with matching welding rods provided by the manufacturer. After welding the flooring will be seamless.The subsurface should be absolutely at one level (Zero).

Ground Floor

First Floor

Second Floor

Providing and laying Rough Shahabad Stone Flooring 40m One Metric Tonneo 45 mm. thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. complete in shade grey. Spec. As directed by engineer in charge

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Spec. No.:- As directed by Engineer-In- Charge

Ground Floor

First Floor

Second Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish Spec. No.:- Bd.M.35 B/Page One Number393

Ground Floor

First Floor

Second Floor

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Spec. No.:- A directed by Engineer in charge

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete

Supply and installation of imported Maple Wood Sports Flooring ( Grade 1 Elite Surface) which is prefinished at factory. All components of the wood system to be imported from BWF & FIBA approved manufacturer and should be prefinished. Technical Specification & Structure of system to be as follows: (a) Laying out of polyethylene sheet 150 to 200 micron over the concrete base beneath the wooden flooring system to prevent moisture from the concrete flooring. (b) Installation of min. 12 mm Cushion pads as per manufaturer recommended Center to center distance on the polyethylene sheet followed by (c) Installation of Pine/Fir wood sleepers (min. 25mm) end to end at right angles to finished flooring. Sleepers shall be staggered with rows spaced 12" (305mm). Allow for a ¼” (6mm) gap between sleepers. Provide 1-½” to 2" (40 to 50mm) expansion void at the perimeter and all vertical obstructions followed by (d) Installation of (min. 20mm) thick x 2-¼” (57mm) min. width & random length ends match as per MFMA, prefinished Maple Wood. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap min.10mm or as per propritery design of the manufacturer will be left open between the wooden flooring and the surrounding tiled area/walls and to be covered with skirting/moulding. The Surface Board: Made of Kiln Seasoned and anti termite treated. Manufacturers must have the following certifications: 1. Grade 1 BWF International Elite Surface 2. FIBA Approved Equipment for Wooden Flooring. Rate including all taxes, custom duty, overseas taxes, transportation, loading and unloading and only excluding GST.

Painting Work Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc.complete. Spec. No.:- As directed by Engineer incharge.

Ground Floor

First Floor

Second Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Spec. No.:- Bd.P.5 Page One Number 413

Doors, Windows & Partition:- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door for w.c. with 1.5mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,, door stopper of make ( ozone,Hettich,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, as per architect's detailed drg.and design complete.Size of door 950mm x 2.35mm. Spec.as directed by the Engineer In charge.

Ground Floor

First Floor

Second Floor

Providing and fixing in position, Double leaf flush door of required size including providing & fixing T.W. frame 60mm x 150mm., 45mm thick solid code hard wood block board shutters with 25mm x 45mm lipping patti, allround the shutter & finished with 1mm thick approved textured laminates on either sides, finishing all exposed surfaces of wood with approved shade french polish, treating all the surfaces of wood in contact with masonary with tar paint (Black Japan), chrominum plated brass fittings & fastenings, S.S. handles etc. complete as per detailed drawing and as directed by the Engineer In charge.

Ground Floor

First Floor

Second Floor

Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plaProviding and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.ted fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First Floor

Second Floor

Providing and fixing glazing panels & doors using 12mm thk toughen clear glass (confirming to ASTM Standards C-1048) supported byc-channel (embedded in the floor) at the bottom & side edge and wall connecting profile at the top edge,stainless steel articulated countersunk bolts threaded bolts,chemical fasterners,etc., glass panel size as per design and drawing including applying colourless sealant of joint incl. required edge polish, making glazing water tight etc. Destructive node joint test reports to be submitted for establishing the safety factor, including operating hardware, SS patch fittings, fabricated long length satin finish SS 304 handles,patchlock, floor springs etc., complete as directed by the architect for frameless patch doors,single or twin leaf shutters with fixed panel on top. Hardware-Droma BTS 80 Floor Spring.

Ground Floor

First Floor

Second Floor

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Ground Floor

First Floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box Spec. No.:- As directed by Engineer in charge.

Supplying and fixing in position Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm , bottom section with drain section track weighing 1.83 Kilogram permetre and top and side section of size 122 x 31.75mm weighing 1.15 Kilogram per One Running Metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 Kilogram per One Running Metre (or as required size) with change in proportionate weight , with 6mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3of opening ) panel fixed with new neo prene gasket,shutters to be provided with nylonen cased stainless steel rollers, necessary locks and handles complete. b) Powder Coated.

Ground Floor

First Floor

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered. b) Powder Coated

Ground Floor

First Floor

Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete (II:- 2 Track 2 / 4 Sash (Big Series) window frame of size 67 x 54 mm & Sash of size 64 x 47 mm), comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kg/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. Spec. No.:- As directed by engineer in charge

Ground Floor

First Floor

Second Floor

Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, (III:- 3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kg/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. Spec. No.:- As directed by engineer in charge

Ground Floor

First Floor

Second Floor

Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, (3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of window) (Big Series) Window frame of size 122 x 54 mm & Sash of size 64 x 47 mm.) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kg/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. Spec. No.:- As directed by engineer in charge

Ground Floor

First Floor

Second Floor

Providing and fixing of factory made uPVC casement window / Fixed Window & Casement Door (White Colour) (Fixed Window (BigSeries) frame of size 67x62mm & Mullion (if required)of size 67x78 mm.) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kg/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. Spec. No.:- As directed by engineer in charge

Ground Floor

First Floor

Second Floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First Floor & Above

Providing and fixing of factory made uPVC Louver window (White Colour) comprising of uPVC multi-chambered with wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with 1.5 mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specifie Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kg/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame shall be fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one lever or fixed louver bracket shall be fitted with the of 4 mm Frosted Annealed glass. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration,wrapping and rotting under general use.a.Louver Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x 78 mm. Spec. No.:- As directed by Engineer in charge

Ground Floor

First Floor

Second Floor

Supply and installation of cubicles of width and depth as per Athena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U-Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete. Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First Floor

Second Floor

Providing and fixing wall paper / Graphic for highlighting the walls with proper adhesive in line level for reception, conference & Auditorium rooms and wherever required as per the drawings. Basic rate of Wall paper is Rs..100/- per Sft. Make - D'decor / Nilaya By Asian Paints or equivalent.

Ground Floor

First Floor

Second Floor

Full Height Partitions in Solid finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.

Ground Floor

First Floor

Second Floor

Providing & Fixing of casement fixed windows/ partition of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerance confirming to DIN standard from approved raw material V2/V4 as directed b engineer incharge.

Ground Floor

First Floor

Grill work & Railing Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge.

Providing and fixing mild steel grill gate with required frame section / size with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Sqmt. Spec. no.:-Bd.W.6 Page No.585 Ground Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No.:- Bd.U.1 Page One Number 537

Ground Floor

First Floor

Second Floor

Providing and fixing mild steel grill railing weighing 20Kilogram/ One Square Metre. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete.Spec. One Number : As directed by Engineer in charge. Spec. No.:- As directed by Engineer Incharge

Ground Floor

First Floor

Second Floor

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete Spec. No.:- As directed by Engineer Incharge.

Ground Floor

First Floor

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) Spec. No.:- As directed by Engineer Incharge

Ground Floor

First floor

Second Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. Spec. No.:- Bd.U.2 Page One Number 537

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) Spec. No.:- BD-T-55 PageOne Number 510

Ground Floor

First floor

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. Spec. No.:- As directed by Engineer in charge.

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec. No.:- Spec. Number As directed by Engineer in Charge.

Elevation Treatment Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete. Spec. No.:- Bd. F. 20 Page One Number 308

Ground Floor

First Floor

Second Floor

Providing first class Brick masonry with conventional / IS. type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M 1:3 and watering etc. in pillars of curved shapes, as shown on the drawing or as directed etc. complete. Spec. No.:- Bd.G.9 (b) Page One Number 317

Ground Floor

First Floor

Aluminium Louveres:- Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Providing lime plaster 30mm thick in two coats having a backing coat of 20 mm thick in 1:3 (one lime: 3 surkhi) with recron fiber and finishing coat of 10 mm thk in 1:2 lime mortar (1 Lime:2 Quartz sand) for internal plastering including mixing approved adhesive such as guggal, jaggery etc. and applying to concrete/brick/stone masonry surface in all positions and finishing the surface even and smooth with lime pluging in 1:1 and curing etc. complete.

Ground Floor

First Floor

Second Floor

Design, supply, fabrication & erection of approved structural glazing using specially designed Vertical Mullion & HorizontalTransoms ofRequired size & as per architect's approved Grid work with aluminium rectangular sections to be fixed in masonary at interval of eachfloor on concrete slab with 80 mm x 100 mm x 5mm thick galvanized M & Langle fixed on wall side with raw bolt size of 10 mm x 90 mm with necessary bolts & washers / nuts for the plumb the linelevels. the glass panel's shall be fixed on a specially designed architectural sub- frame using Dow Corning 995 strural sealant & GE Silicon (SSG - 4000) sub frame would be fixed on main frame grid in amanner that no aluminium frame is visible from outside & groovesbetween the glass panel shall be filled with weather sealant of Dow corning 789 / GE Sil proof to made it air tight, water proof & dustfree thus giving it a flush look outside. Glass will be of 6 mm thickGlaverbel reflective type with heat strenghthened toughened

Perforated powder coated GI metal sheet of 0.9 to 1.0mm thick for elevation treatment including frame work for fixing Supply installation of metal perforated sheets having perforations as per the architect choice and up to 60% visibility to be fixed on suitable MS structure. With the help of screws. The total system has to be powder coated as per the colour. Choice by engineer Incharge.

Providing and fixing of Terracotta block Jali at all heights elevation treatement with extruded Terracotta block ventilated rainscreen of size 200 X 200 X 60 mm - 250 X 250 X 63 mm of approved colour, texture,design and pattern having following Technical Specification. Terracotta block laying/fixing with cement morter or Adhesive as directed by manufacturer of terracotta with 3 - 4 mm grove at every joint. Providing Extra stiffeners of MS Flat of size 40 X 5 mm in between every 3 or 4 rows of jali to compensate the lateral forces. Rate Including of all required material, labour,scaffolding, transporatation,loading & unloading etc complete. As directed by engineer incharge. Note:- If any additional Structural steel suppports required will be paid separetely, Excluding stiffners supports as mentioned above. TECHNICAL SPECIFICATION Strength:- 10.00 - 12.50 N/mm^2 Density:- Density of normal clay products 1200 - 1250 kg/m^3 Water Absorption:- It should not be more than 15% of the self-weight of the product. Fire Resistance:- Upto 30 Minutes. Weight of Terracotta block :- 2.0 - 2.50 kg

Acoustical Work ACOUSTICAL WOODWOOL WALL PANELLING: Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Heradesign planks of 600Mm*1200Mm *25Mm thickness made out of wood wool fibre of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-Cement) with open & smooth surface texture, Weight of panel to be 11.3 Kg/m2. A Completly harmless Envirenment & Human Friendly & also a disposable or recyclable Material & can last for more than 80 Years in building interiors As it has long lifespan & suitable for Indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood cells against ageing & fungal attack. To achive upto NRC=1.00 it should be a clear gap of 200Mm from wall slab along with the backing of Mineral wool of 50mm thick with 64 kg/m3 density. Ecologically Sound Material with high mechanical strength with Crash test of 90Km/H with Ball Impact Test DIN18032 & EN13964 with flying colors & A sustainable material (PEFC & FSC Certified) along with EPD Certified Acc. to EN ISO 14025 (AUB-Envirenmental Product declaration). Manufacturing tolerance for nominal size: Length, Width & Thickness ± 1 mm, & In a Standard Climate of 23° C and 50% rel. humidity. FIXING & SUBSTRUCTURE: Impact Resitant According to DIN-18023 or EN13964 to be Fixed on CD Sections Profile framework with Screw 9Pc/Panel & Centre Distance Support of 300Mm & Centre distance of Cross Profile would be at 600Mm & Main Profile at 900Mm CD Profile is made out of GI( Sections Profile 60/27/0.6Mm-0.6MmThick x 60Mm Width x 0.27Mm height). The Main Profile is in the legth of 3000Mm & to form a section of 600mm x 1200mm. Heradesign Superfine panels to be fixed on the wall with a minimum of 200Mm void or gap with Galvanized screws of length 50Mm & Dia 4.5Mm with a backing of Mineral Wool of density 64kg/m3 density (50mm thick).Colour Of Panels : NATURAL BEIGE, Can be Painted to the desired colour (Any- RAL, NCS or StoColor Shades) using water based color by Spray method prior to installation. FIRE CLASS as per EN 13501-1:B –s1, d0. Test Certificates to be submitted.

ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25MMProviding and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained Spec. No.:- As directed by Engineer in charge

ACOUSTICAL GLASS FIBRE FALSE CEILING CLOUDS & SHAPES : Providing and Fixing Acoustical Clouds/Shapes - Acoustical clouds which are 30 mm thick, flat glass fibre panels of Humidity Resistance RH 95%, with embedded frame made of aluminium extruded section of 38X10mm of grade 6063-T6 as per dimension mentioned in below table for reinforcement and secured hanging. Embedded extrusion shall have grub slot with pre inserted nut for group hanging and connected using Aluminium die casted corner connector with ¼” – 20 threading for hanging using cable adjuster for independent clouds. The form of Acoustical Clouds/Shapes - shall be Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) in standard Traffic White color with light reflectance 90% as per ASTM 1477-98 or in the color specified by the Architect / Engineer in charge (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon). The Acoustical Clouds/Shapes shall be made of Glass fibre panel with density of 110-120 Kgs/m3 along with acoustical sound absorbing scrim on the face to achieve sound absorption as per below mentioned table in accordance to EN ISO 354 :2003 (average of 500-4000Hz) . The face and edges shall be finished with matching water based texture paint. Shape Nominal Size and Sound Absorption – Metric Sabin1. Square 1170x1170mm - 2.48 Metric Sabin 2. Convex 1170x1140mm 2.28 Metric Sabin 3. Concave 1170x1140mm 1.94 Metric Sabin 4. Circle 1170 Dia. 2.12 Metric Sabin 5. Hexagon 1170x1010mm 1.61 Metric Sabin 6. Trapezoid 1170x1170mm 2.15 Metric Sabin 7. Left Parallelogram 1170x1170mm 2.15 Metric Sabin 8. Right Parallelogram 1170x1170mm 2.15 Metric Sabin.The panel shall be hung as per the following based on the installation. Individual Suspension - The panel shall be hung using deck hanging kit comprising of griper structure anchor & cap of dia. 20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft cable of 1/16” dia. The One Number of deck hanger will be as per Table 1 above. Spec. No.:- As directed by Engineer in charge

Wood panel for walls:- Providing and fixing imported pine wood 25 mm thick 4" width, both side chamfering, front side machine griding for smooth surface with water based painting (Apex) on both front and rear sides etc. complete including all required material for fixing. Spec As directed By engineer in charge

Back fire panel safety guard :- Providing and Fixing of Back fire Panel Safety Guard, made up of 16mm EVA Mat and sectioned fitted on heavy duty MS sheet covered at Back Backfire Panel Area Safety Guard for Bullets Rebound Protection.

Providing & Fixing 50 mm Artificial Grass, thick rubber underside, green grass with yellow strands give realistic look and feel. Spec. No.:- As directed by Engineer in charge.

Expansion Joint Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25 mm thick including fixing T.W. battens on both faces and finishing as directed etc. Complete.

Ground Floor

First Floor

Providing expansion joints in R.C.C. framed structure (exterior Columns) with plain premoulded filler 25 mm thick and 3 mm thick alluminium plate, hold fast, fixing T.W. battens on internal face, finishing etc. complete as directed.

Ground Floor

First Floor

Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed.

Ground Floor

First Floor

Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and T.W. battens on inner face finishing etc. Complete as directed.

First Floor

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Plumbing Work:- Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete. Spec. No.:- As directed by Engineer Incharge

Ground Floor

First floor

Second Floor

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall. . Spec. No.:- Bd.V.23 Page One Number 562

Ground Floor

First floor

Second Floor

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. . Spec. No.:- BDV.-30 PageOne Number616

Ground Floor

First floor

Second Floor

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First floor

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.

Ground Floor

First floor

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. Spec. No.:- As directed by Engineer incharge

Ground Floor

First floor

Second Floor

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Spec. No.:- As directed by Engineer incharge

Ground Floor

First floor

Second Floor

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. . Spec. No.:- As directed by Engineer incharge.

Ground Floor

First floor

Second Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. Spec. No.:- As directed by Engineer in charge.

Ground Floor

First floor

Second Floor

Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. Spec. No.:- Bd.V. 12 PageOne Number 556

Ground Floor

First floor

Second Floor

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete. Spec. No.:- As directed by Engineer incharge

Ground Floor

First floor

Second Floor

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No.:- As directed by Engineer incharge

Ground Floor

First floor

Second Floor

Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete." Spec. No.:- As directed by Engineer incharge

Ground Floor

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. no.:- BD.V 5 page 551 and as directed by Engineer in charge

Ground Floor

First floor

Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. no.:- BD.V 5 page 551 and as directed by Engineer in charge

Ground Floor

First floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. no.:- BD.V 5 page 551 and as directed by Engineer in charge

Ground Floor

First floor

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. no.:- BD.V 5 page 551 and as directed by Engineer in charge

Ground Floor

First floor

Providing and fixing on walls/ ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. no.:- BD.V 5 page 551 and as directed by Engineer in charge

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. no. :- BD.V 5 page 551 and as directed by Engineer in charge

Ground Floor

First floor

Second Floor

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.:- Bd.V.8 Page One Number 554

Ground Floor

First floor

Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.:- Bd.V.9 Page One Number 555

Ground Floor

First floor

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.:- Bd.V.9 Page One Number 555

Ground Floor

First floor

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. . Spec. No.:- Bd.V.9 Page One Number 555

Ground Floor

First floor

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. . Spec. No.:- Bd.V.9 Page One Number 555

Ground Floor

First floor

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Ground Floor

Second Floor

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Spec. No.:- As directed by Engineer-in-charge

First floor

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. Spec. No.:- As directed by engineer-in- charge.

Ground Floor

First floor

Second Floor

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No.:- As directed by Engineer in charge.

Ground Floor

First floor

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec. No.:- As directed by Engineer incharge.

Ground Floor

First floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec. No.:- As directed by Engineer incharge.

Ground Floor

First floor

Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.:- Bd.V.41, Page No. 573

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.:- Bd.V.41, Page One Number 573

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.:- Bd.V.41, Page One Number 573

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap Spec. No.:- Bd.V.38, Page One Number 572

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. Spec. No.:- Bd.V.43, Page One Number 574

Providing and constructing Brick Masonry Inspection Chamber 90cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel Shal round G.S.W. pipes,Brick Masonry,plastering from inside and with frame fixed incement concrete with R.C.C. Cover medium duty 140Kilogram with frame etc complete. Spec. No.:- Bd.V.43, Page One Number 574

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete Spec. No.:- Bd.V.44, Page One Number 575

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 135921992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) Spec. No.:- As directed by Engineer in charge.

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Ref No.:- As directed by Engineer Incharge

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.:- As directed by Engineer in charge.

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab,manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Bd.V.46, Page One Number 576

Providing and fixing reinforced cement concrete cover of size 90cmx45cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) Spec. No.:- As directed by Engineer-in-charge Ground Floor

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 Kilogram)

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Spec. No.:- As directed by Engineer in charge

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 80 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Providing and fixing on walls/ ceiling/ floors 100 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First floor

Second Floor

Constructing brick masonry circular manhole 1.22 m internal diaat bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement:4 coarse sand) inside cement plaster 12 mm thick with cementmortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat ofneat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) and makingnecessary channel in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) finishedwith a floating coat of neat cement, all complete as per standarddesign : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20grade designation) 560 mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of classdesignation 3.5

POLY TUBE 16 MM.RD. CL III AS PER IS:12786

POLY TUBE 20 MM. RD. CL III AS PER IS:12786

POLY TUBE 25 MM. RD.CL III AS PER IS:12786

POLY TUBE 32 MM. RD.CL III AS PER IS:12786

LLDPE EXTENSION TUBE 6 MM. MINIMUM THICKNESS 1 MM.

LLDPE EXTENSION TUBE 8 MM. MINIMUM THICKNESS 1 MM.

IN LINE DRIP LINE 16MM. 4 LPH. 40 CMS. NON REGULATED CLASS III : IS: 13488

IN LINE DRIP LINE 16MM. 2 LPH.TO 4 LPH. 30 CMS.CLASS II REGULATED : IS: 13488

IN LINE DRIP LINE 12MM. 2 LPH. TO 3.5 LPH. 30 CMS.CLASS III NON REGULATED: IS: 13488

DRIPPER 4 LPH./8 LPH. REGULATED. IS:13487

DRIPPER 4 LPH./8 LPH. NON REGULATED.IS: 13487

Providing and Fixing , Installation of Drip and Sprinkler Irrigation system in gardens having area Up to 1000 Sq. Mtr. Incudes drips, Sprinkler, Filters, Pipes With 3 year warranty . Excluding Pumping Unit

LANDSCAPE SOFTSCAPING WORK:- Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete.

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms.

Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs.

Filling fresh garden soil / silt & manure in excavated area of depth 30cms.

Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover.

Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m.

Maintainance of Newly Developed Shrubbery/ Hedges/ Edges/ Ground covers Area. For First 30 days Only

Maintainance of Newly Planted tree varities having height 1mtr. - 2mtr. For First 30 days Only

Supplying on site fresh Garden soil (i. e. 3 part soil ) (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms ( consolidated thickness). Quantity of soil 0.261 cum x 1000/cum = 261/-

Supplying on site fresh Garden soil (i. e. 3 part soil ) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).Quantity of soil 0.1414 cum x 1000/cum = 141.40/-

Supplying on site well decomposed Farm Yard Manure (i. e. 1 part FYM) for excavation area of depth of 30 cms ( consolidated thickness). Quantity of FYM 0.081 cum x 1200/cum = 97.20/-

Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).Quantity of FYM 0.044 cum x 1200/cum = 52.80/-

FLOWERING SHRUBS:- Specification:- Well Developed ,Fresh, Healthy half in bloom, free from pest and diseases.

Allamanda, Bag Size:- 8'X10', Height Of Plant:- 30 cm to 45 cm

Caesalpinia pulcherrima, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 60 cm

Eranthemum laxiflorum, Bag Size:- 8" x 10", Height Of Plant:- 45 cm to 60 cm

Hibiscus, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Gardenia/Anant, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Ixora Duffy pink, Bag Size:- 8" x 10", Height Of Plant:- 15 cm to 30 cm

Jatropha, Bag Size:- 8" x 10", Height Of Plant:- 20 cm to 45 cm

Mogara/Jasminum, Bag Size:- 8" x 10", Height Of Plant:- 15 cm to 30 cm

Nerium, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 60 cm

Ratrani/Night queen, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Plumbago, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Russelia, Bag Size:- 7" x 8", Height Of Plant:- 15 cm to 30 cm

Thevetia, Bag Size:- 7" x 8", Height Of Plant:- 30 cm to 45 cm

Heliconia any type, Bag Size:- 7" x 8", Height Of Plant:- 30 cm to 45 cm

Ixora singaporensis, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 60 cm

Powder puff plant, Bag Size:- 13'' x 13'', Height Of Plant:- 45 cm to 60 cm

Plumeria Dwarf singapore pink, Bag Size:- 13'' x 13'', Height Of Plant:- 60 cm to 90 cm

Plumeria Alba, Bag Size:- 13'' x 13'', Height Of Plant:- 120cm to 180cm

Tagar, Bag Size:- 7" x 8", Height Of Plant:- 15 cm to 30 cm

Justicia coccinea

2-A-FOLIAGE SHRUBS-A Specification:- Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases

Aglaonema, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Alpinia, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Aralia, Bag Size:- 7" x 8", Height Of Plant:- 30 cm to 45 cm

Cordyline, Bag Size:- 10" x 10", Height Of Plant:- 30 cm to 45 cm

Croton, Bag Size:- 7" x 8", Height Of Plant:- 20 cm to 30 cm

Cyperus golden, Bag Size:- 13" x 13", Height Of Plant:- 60 cm to 90 cm

Dianella, Bag Size:- 7" x 8", Height Of Plant:- 20 cm to 30 cm

Duranta Golden, Bag Size:- 7" x 8", Height Of Plant:- 25 cm to 30 cm

Ficus benjamina, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 60 cm

Ficus blackeana, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Ficus panda, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Malphigia, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Maranta, Bag Size:- 8" x 10", Height Of Plant:- 15 cm to 30 cm

Schefflera green, Bag Size:- 8" x 10", Height Of Plant:- 20 cm to 30 cm

Schefflera variegated, Bag Size:- 8" x 10", Height Of Plant:- 30 cm to 45 cm

Zebrena pendula

Rhoea

2-b -FOLIAGE SHRUBS-B:- Specification:- Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases Cycas, Bag Size:- 18" x 18", Height Of Plant:- 90 cm to 120 cm

Hedges Specification:- Well Developed, Healthy Foliage / Half Bloom Stage , Free from Pest and Diseases.

Duranta golden, Bag Size:-7" x 8", Height of Plant:- 20 cm and above

Eranthimum, Bag Size:-7" x 8", Height of Plant:- 20 cm and above

Justicia coccinia, Bag Size:-7" x 8", Height of Plant:- 20 cm and above

9(A) Hybrid Flowering Seasonal seedlings Specification:- Fresh Healthy, Free From Pest and Diseases at least 4 to 5 leaves

Salvia, Tray:- 104 nos, Height Of Plant:- 5 cm and above

Vinca, Tray:- 104 nos, Height Of Plant:- 5 cm and above

10 (a) Indoor Plants in pots Specification:- Plant should be well Developed, Healthy conition, Plant should be Pest and disese Free.

Costus, Tray:- 6" Pots, Height Of Plant:- 30 cm to 45 cm

DracaenaGolden, Tray:- 6" Pots, Height Of Plant:- 20 cm to 30 cm

DracaenaGreen, Tray:- 6" Pots, Height Of Plant:- 20 cm to 30 cm

Sansevieria, Tray:- 6" Pots, Height Of Plant:- 20 cm to 30 cm

Spathiphyllum, Tray:- 6" Pots, Height Of Plant:- 20 cm to 30 cm

11-a Specification:- Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,undamaged.

Areca Palm, Tray:- 10" x 12", Height Of Plant:- 3 to 4 ft.

Raphis palm, Tray:- 10" x 12", Height Of Plant:- 2 to 3 ft.

12) MEDICAL PLANTS:- Specification:- Healthy ,Fresh, Free from Pest and Diseses

Alovera (Korphad), Bag Size:- 7" x 8", Height Of Plant:-15 cm to 30 cm

Lemon Grass (Gavti chaha), Bag Size:- 7" x 8", Height Of Plant:-15 cm to 30 cm

5 (b) Flowering Trees Specification:- Minimum Girth 5 to 7 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves , with clear tunk,healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.

Bahva (Amaltash), Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Bottle brush, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Gulmohar, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Largesstroemea, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Parijat, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Spathodia, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Tabebuia, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

6 (b) Foliage Trees Specification:- Minimum Girth 5 to 7 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves , with clear tunk,healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.

Alstonia/Satvin, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Arjuna, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Deshi Badam, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Filicium/Fern Tree, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Karanj, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Tamarind, Bag Size:- 13" x 13", Height Of Plant:- 6 ft to 8 ft

Furniture Work:- Providing and Supplying Reception table of overall size 1650 X 750 X 750 mm made out of 19 mm thick Marine ply (IS 710 : 2010) top Sides and apron having Top and bottom horizontal patta. The table shall be externally and internally finished with 4mm thick group match veneer pattern with grooves including necessary lipping moudling and hardware.5 mm thick thoughened glass modesty shall be provided with 50 X 30 mm BTC wood frame etc. complete. Antitermite treatement to marine ply and all wooden accessories on both sides for full faces before the joineries melamine polish on french polish base coat, hardware as per drawings. etc. all complete as per Architects Drawing.

Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. Spec. No.:- As directed by Engineer-in-charge

Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First Floor

Second Floor

Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )as per drawing. Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First Floor

Second Floor

Executive Table @ 2250L x 2100D x 750HT including Low Height Credestal @ 1200L x 450D x 650HT Providing & Fixing of Table @2250Lx 2100D x 750HT TOP & GABLEEND to be made of Membrane finish with soft water falledges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @1200L X 450D X 650H: To be made out of Membrane Finish (2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing

Ground Floor

First Floor

Providing and fixing of Modular table of required size. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010), FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 :2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete. Accessories Key Board Tray -Size: - Width: 600mm, Depth: 270, Height: 70mm keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene) material provided with sliding telescopic channels. The tray hanged below the top by steel by MS Brackets. Finish. All steel components should be epoxy powder coated with seven tanks anti corrosion pre- treatment of surface. ABS wire managers to be provided wherever required for table top. CPU Trolley : - Width: 180mm Depth: 245 mm, Height: 210mm Made up of press formed MS CR sheet Finish provision for height & width adjustment. All steel components should be epoxy powder coated with seven tanks anti corrosion pre- treatment of surface. ( Coating thickness 50 to 60 micron) (900 x 600 x 750)

Ground Floor

first Floor

Second Floor

Providing and supplying Modular CUPBOARD made up of requiredsize. Top made of 25mm Marine ply (IS 710 : 2010), having postformed decorative laminate of 0.8mm on top and FIRE RETARDENT laminate on all sides / surfaces etc. complete. Sides, Sides in 25mm thk Marine ply (IS 710 : 2010). Adjustable shelf made in 25mm thk Marine ply (IS 710 : 2010) placed on standard shelf pins etc. complete. Storage Back made of 9mm thick Marine ply (IS 710 : 2010) etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete. 900 x 450 x 1950 - 4 SHELVES

Ground Floor

First Floor

Second Floor

Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First Floor

Second Floor

Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery Spec. No.:- As directed by Engineer-in-charge

Ground Floor

First Floor

Second Floor

Providing and fixing of Modular table of required size. Table top shall be made of 25mm thick Marine ply (IS 710 : 2010),FIRE RETARDENT laminate on all sides / surfaces. Sides in 25mm Marine ply (IS 710 : 2010). All boards components like top, sides etc. are finished with 2mm thick machine pressed PVC edge banding in matching colour. (Rehau Make/or Equivalent) for better impact resistance. Other components like modesty panels of 600mm height (apron) shall be made of 18mm thick Marine ply (IS 710 : 2010) in approved colour and shade as per pre-approved sample etc. complete b) 1050 x 450 x 750

Ground Floor

First Floor

Providing & fixing premium quality Roller blinds with prestress Solar protection fabric of high tenacity Polyester Yarn with PVC coating and fungi static treatment and should block the light flux & offer elimination of glare and sunlight /radiance etc. complete. Fabric shall have visible light & solar properties &Greengard (gold) Indoor Air quality & children & school certified. Weight - 540 g/sq.m (+/- 5%) Thickness - 0.47 mm (+/- 5%) Fabric openness factor - 0% Tensile strength (warp / weft) - 160/170 daN/5cm Tearing Strength (warp/weft) - 11/13 daN Fungi static treatment - Degree 0 Excellent (EN ISO 846-A) Fire retardancy: B-s2,d0/EN 13501-1, class A/ASTM E84

Ground Floor

First Floor

Second Floor

"Providing and supplying wooden sofa made with minimum 19mm.Marine ply (IS 710 : 2010) structure and internal frame work made of C.P. teak / Maranti wood seat made with minimum 19mm. Marine ply (IS 710 : 2010) and cushion made with foam of 150mm thick - 32 density on seat covered with 14mm thick - 18 density foam. Back made with wooden frame of minimum 50mm X 40mm with 4 mm. ply and covered with foam of 100mm thick - 32 densities covered with 14mm thick - 18 density foam for back extra support to the shape all foam of seat and back covered with tapestry approved by E-I-Charge. (Basic rate Rs. 450/- metre.) Handle made with wooden frame with box of 12mm. ply covered with 14mm thick - 18 density foam with tapestry etc. complete"

Ground Floor

First Floor

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5(cms) Breadth(cms):100(cms) Height(cms):100(cms) Weight(Kilograms):66(Kilogram) Seating Capacity: Five Seat

Ground Floor

First Floor

Second Floor

Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mmX750mmX450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Water proofing Ply. The Outer Laces To Be Finished With High Quality 4Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Ground Floor

First Floor

Second Floor

Providing table top of required size fixed at a standard table top height of upto750mm min (including table top thickness). Table top shall be made of 25mm thick Marine Plywood (IS 710 : 2010) and FIRE RETARDENT laminate onall sides / surfaces. Sides with S.S.Round Under structure etc. complete.

Ground Floor

Second Floor

Conference Table @ 3600Lx1400Dx750HTProviding & Fixing of MainTable@3600x1400Dx750HT made up of 18+18mm Thick MDF top with PVC Membrane finish and water falledge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edgesin PVC Membrane finish and restin Prelaminated MDF with batton structure.Gableends should be hollow from inside for the provision of passing electrical and Datawiring., MODESTYPANEL:-tobemadeof18mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.

Ground Floor

First Floor

Second Floor

Providing and fixing SS (IS 6911:1992) grade of steel 304 Dinning chirsfor dining Hall and dining Room area as per the drawing or approved size and shape including all lead lift shifting to work location etc. complete.

Ground Floor

First Floor

Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color.

HVAC SYSTEM VRV SECTION (OUTDOOR UNIT) Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longerpiping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

INDOOR UNIT Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact/standard size of nominal cooling capacity 0.6TR ( 420 cfm )/0.8TR ( 441 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.3TR (1165 cfm) to 4.0TR (1218 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static room/indoor unit (IDU) having nominal cooling capacity of 8.0TR (3200 cfm) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area and decorative slim dimension suitable for ceiling suspended arrangement with an electronic control console and any additional refrigerant and oil charge as per requirement during installation complete.

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete.

Evaporative Cooling Supply, Installation, Testing, commissioning of Floor mounted 2 stage evaporative cooling units of blow through type with single tire arrangement with weatherproof canopy. Unit shall be in double skin construction with outer skin: of 0.80 mm (22G) pre-plasticized galvanized sheet steel and Inner Skin: 0.63 mm (24G) Plain GI sheet steel. The panel should have CFC free PUF Insulation to density of 38-42Kg/m3 in double skin panels 44±1 mm thick. The unit's should consist of Fan sections with DIDW/SISW backward curved belt driven fan suitable capacity to handle primary and secondary air, IE-3 Motors. Unit shall be provided with minimum 10micron filter on suction side. The unit should have Plate type Indirect Heat exchanger with 80% maximum efficiency, Cellulose Pad of 200mm thick for evaporative cooling media made from specially impregnated cellulose material, submersible pumps , water tank of 18swg in SS304 & hard plastic Mist eliminator, etc. The unit should have vibration isolator, access doors, view glass ,limit switch, suitable openings in unit. Required suitable size external isolation ball Valve arrangement, cabling with cable tray, earthing and Electrical control panel (Statar panel with VFD) with inbuilt PLC panel.

14000 CFM / 65mm St.Pr.

25000 CFM / 65mm St.Pr.

Supply, Installation, Testing & Commissioning of Corrosion Prevention Coating for fins & Expose Copper Tube per units as per specification.

Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.

Supplying, erecting, testing and commissioning centralized programmable remote control panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.

Providing vaccumising the airconditioner system to 200 micron and charging with R410a/R32 refrigerant for AC unit.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

REFREGRENT PIPE supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge (hard drawn copper pipe for liquid main line and for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

DRAIN PIPE Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 40/50 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 50/60 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 60/70 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 50 mm for solar water heater system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 60 mm for solar water heater system.

DUCTING (Rectangular Type Duct) LOW SIDE SECTION Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete.

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°.

Bird Screen Supply & Installation of Bird screen shall be made out of 25 x 25 mm 2.5 mm Gl wire mesh inset with 0.8mm Gl frame and bolted to the enclosure flange at 150mm centre using 12mm MS brass bolts and nuts

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers (Rectangular/Round) of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete.

S & F of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core complete all as specified and directed by engineer-in.charge.

S & F of return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core complete all as specified and directed by engineer.in-charge.

Supply, installation, testing and commissioning of High Velocity extruded Aluminium construction square swirl diffuser. Adjustable blades suitable for swirling horizontal discharge. Attached with butterfly volume control damper. Powder coated finish. Frame suitable for height and air capacity.

ELECTRICAL SECTION Supply, Installation, Testing & Commissioning of All control cables between indoor and outdoor unit laid in PVC Piping and clamped. Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armored cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner.

Supply, Installation, Testing and Commissioning of HVAC related CIVIL work like core cutting in wall & also fire sealent around the duct and copper pipe..

INSULATION SECTION Acoustic Insulation : Supply & fixing of Acoustic insulation for Supply air duct using 15 mm thick class 1 rating open cell nitrile rubber elastomeric insulation with density of 140-180 kg /m³. The insulation mamafactured as per BS 476 part 7 & which should also meet UL 94 test supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209) should not support microbial growth (ASTM 2180, G21,G22) and should not emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.04w/m k @ 20 degC as per DIN EN 12667. and water vapor permeance of 0.10. Adhesive shall be used additionally with VOC level not excedding 50 grms / litre 10 mm thick.

Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2017.

S & F of FM approved highly. flexible, closed-cell, 25 mm thick underdeck insulation of elastomeric foam based on synthetic rubber (NBR) tested for service temperature range -50-105'C as per EN 14706, EN 14707 & EN 14304, thermal conductivity A 3 0.037 WmK at mean temperature 0, = 20'C as per EN 12667 & EN ISO 8497, water vapour diflusion resistance factor y > 7000 as per EN '12086 & EN 13469, water absorption by volume 0.2o/o as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 475 Part 6: 1989, Class 1 surface spread offlame as per BS 476 7: '1997, flammability HB, V.0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. .

Supply, Installation, Testing, commissioning of black colour 7 mill glass cloth with addhesive for expose duct.

VENTILATION SECTION INLINE TYPE EXHAUST AIR FAN Supply, Installation, Testing, commissioning of Single Skin Ceiling Suspended Cabinet Inline Type Exhaust Fans & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 1500 CFM, 25mm St. Pr./Sutaible HP Stater Panel

Supply, Installation, Testing, commissioning of Double Skin Ceiling Suspended Cabinet Inline Type Exhaust Fans & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 1200 CFM, 32mm St. Pr./Sutaible HP Stater Panel

Supply, Installation, Testing, commissioning of Single Skin Ceiling Suspended Cabinet Inline Type Exhaust Fans & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 1200 CFM, 25mm St. Pr./Sutaible HP Stater Panel

Supply, Installation, Testing, commissioning of Single Skin Ceiling Suspended Cabinet Inline Type Exhaust Fans & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 1000 CFM, 25mm St. Pr.

Supply, Installation, Testing, commissioning of Double Skin Ceiling Suspended Cabinet Inline Type Exhaust Fans & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 800 CFM, 32mm St. Pr./Sutaible HP Stater Panel

Supply, Installation, Testing, commissioning of Ceiling Suspended Cabinet Inline Type Exhaust Fans & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 600 CFM, 25mm St. Pr.

FLOOR MOUNTED TYPE EXHAUST AIR FAN:- Supply, Installation, Testing, commissioning Double Skin Floor Mounted Cabinet Type Exhaust Fans with canopy & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 14,000 CFM, 50mm St. Pr./Sutaible HP Stater Panel (IP 65) with conopy.

Supply, Installation, Testing, commissioning Double Skin Floor Mounted Cabinet Type Exhaust Fans with canopy & Casing, drive, motor, mounting frame, starter, isolator & Necessary cabling & earthing strip For Following Capacities : As per AMCA210 standard "Laboratory Methods of testing fans for rating" Balancing quality - As per AMCA204, ISO 1940 standard. 25000 CFM, 50mm St. Pr./Sutaible HP Stater Panel (IP65 with Canopy)

WALL MOUNTED TYPE PROPELLER EXHAUST FAN Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380 mm. 1400 RPM complete erected in position as per specification no. FG FN/EXF (100/150/200CFM)

WALL MOUNTED TYPE CIRCULATOR FAN Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

DX SECTION:- Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unithi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC

Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room air conditioning unit 1.3TR to 1.7TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air andling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air Handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supply, installation, testing and commissioning of PLC sequential controller for sequencing, programming and scheduling the interconnected AHUs with pre-defined duty cycle for equal run, auto stand'by changeover, fault take'off, etc. as per working requirements complete all as specified and directed by the engineer-in-charge.

REFREGRENT PIPE :- Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system.

DRAIN PIPE:- Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system.

MS WORK FOR OUTDOOR Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ELECTRICAL SECTION Supply, Installation, Testing & Commissioning of All control cables between indoor and outdoor unit laid in PVC Piping and clamped. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

HVAC PANELS VRF OUTDOOR UNIT PANELS Supply, installation, testing, commissioning of HVAC power Distribution panel with double door with canopy gas kit and outdoor type IP55/54 for the following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and verminproof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. As Per single line diagram. (HVAC PANEL FOR VRF/VRV OUTDOOR UNIT) NOTE:-PANEL SHOULD BE TRIP IN CASE OF FIRE, SIGNAL TO BE RECEIVED FROM FIRE ALARM PANEL. LOGIC TO BE PROVIDED BY PANEL BUILDER WITH NO/NC/POTANTIAL FREE CONTACTS panel shall be compliance to IEC 61439 Incomer - 1 Sets of 320A TP 25 KA MCCB each with SC / OC Microporcessor Based releases with following mountings on each feeder. 1 Set of Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps with Control MCB's 1 No Multi function Meter with RJ 485 Port for Down load the Reading Data in Computerwith software With 3 Nos. Control MCB's 3 Nos.320 / 5A 15 VA class 5 P 20 C.T.'s Busbar - 400 Amps TP(N) Al. Heat Shrink colour PVC sleeved Outgoings - 6 Sets of 63A TPN 10 KA MCB 3 Nos. LED ON / OFF /TRIP Indicating Lamps with. Control MCB's, 3 Sets of 40A TPN 10 KA MCB 2 Nos. LED ON / OFF /TRIP Indicating Lamps with. Control MCB's,

Supply, installation, testing, commissioning of HVAC power Distribution panel with double door with canopy gas kit and outdoor type IP55/54 for the following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and verminproof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. As Per single line diagram. (HVAC PANEL FOR VRF/VRV OUTDOOR UNIT) NOTE:-PANEL SHOULD BE TRIP IN CASE OF FIRE, SIGNAL TO BE RECEIVED FROM FIRE ALARM PANEL. LOGIC TO BE PROVIDED BY PANEL BUILDER WITH NO/NC/POTANTIAL FREE CONTACTS panel shall be compliance to IEC 61439 Incomer - 1 Sets of 250A TP 25 KA MCCB each with SC / OC Microporcessor Based releases with following mountings on each feeder. 1 Set of Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps with Control MCB's 1 No Multi function Meter with RJ 485 Port for Down load the Reading Data in Computerwith software With 3 Nos. Control MCB's 3 Nos.250 / 5A 15 VA class 5 P 20 C.T.'s Busbar - 320 Amps TP(N) Al. Heat Shrink colour PVC sleeved Outgoings - 7 Sets of 63A TPN 10 KA MCB 3 Nos. LED ON / OFF /TRIP Indicating Lamps with. Control MCB's, 6 Sets of 40A TPN 10 KA MCB 2 Nos. LED ON / OFF /TRIP Indicating Lamps with. Control MCB's,

FIREFIGHTING, PLUMBING AND PUMPS:- Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying, installation, testing and commissioning of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic, for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working)

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 20 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 200 mm ring main of fire fighting system.

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene Polyhose long fitted with necessary accessories complete as per specification No. FF-FFA/HV

Supplying fire fighting C.P. controlled percolation Hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH

Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg.capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note:- As per Foot note No.08 add 2%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note:- As per Foot note No.08 add 2%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note:- As per Foot note No.08 add 2%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note:- As per Foot note No.08 add 2%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note:- As per Foot note No.08 add 2%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note:- As per Foot note No.08 add 2%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note:- As per Foot note No.08 add 5%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note:- As per Foot note No.08 add 5%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note:- As per Foot note No.08 add 5%

Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note:- As per Foot note No.08 add 5%

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280LPM at 120m head driven by 150 HP capacity diesel engine at required working speed suitable for automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying, installation, testing and commissioning of main fire pump(MFP / EP) suitable for water discharge of 2280LPM at 120m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 150 HP capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180LPM at 120m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 15 kW or of suitable kW capacity for manual/automatic operation and consisting of following: (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

For addition of capacity of main electric motor driven fire pump MFP (1 working) for hydrant system is more than 22kW, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears and motor starters for main & jockey pumps along with necessary accessories for main & jockey fire pumps MFP=(1working), JP = (1working + 1standby, alternate run per start in auto mode) For main electric motor driven fire hydrant system pump of 112kW capacity & relevant capacity jockey pump add Rs….

For addition of fire sprinkler system to basic fire hydrant system control panel(FCP) which includes one main electric motor driven fire pump MFP (1working) having __kW capacity & relevant capacity jockey pumps, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears busbar and additional motor starters for main & jockey pumps along with necessary accessories with software & hardware for main & jockey fire pumps additional Sprinkler system MFP=(1working), JP = (1working+1standby, alternate run per start in auto mode) @relevant capacity For main electric motor driven fire sprinkler system pump of 112kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode, add Rs….

For standby main electric motor driven fire hydrant/sprinkler system pump (MFP- 1 standby), add as follows in the basic cost of Item no 13-5-1 towards required switchgears and motor starter along with necessary accessories and updation of control logic with interlocking for operation of pumps MFP=(1working+1standby, alternate run per start in auto mode) JP = (1working+1standby, alternate run per start in auto mode) for main & jockey fire pumps For standby main electric driven fire hydrant/sprinkler system pump of 112kW capacity, add Rs…........

For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic, add Rs....... for 5.5/ 7.5 kW centrifugal type booster pump 1no(1working) , add Rs…....

Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 630A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 .630A FP ATS

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s. A.C. supply, having delivery head from 27 to 9 m and discharge from 300 to 660 litres. per minute & pipe of Suction 65mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP (sump pump)

Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.

Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body.

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 20 litres per hour and storage capacity 20 litres with partially stainless steel body As per specification no. APWCR/ WC

Supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof ABS plastic body, high grade SS inner tank & 3kW heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250V, 50Hz, A.C. supply with inlet and outlet, with 3 core PVC flexible copper wire leads duly tested and marking sr. no. and date of erection complete.

light weight duty rain gun with 1m stand assembly 1 1/2" -bsp male threaded connection fc. operating pressure 2 kg./sq.cm to 4 kg./sq.cm nozzle 14 no. wetting radius 24 mtrs. - 3.27 lps; 27.5 mtrs - 4.01 lps; 30 mtrs. - 4.63 lps.is:12232-1

big volume rain gun - light weight high tech composite material - 2" bsp. female threaded inlet, no, operating pressure and flow:- 2 kg./sq.cm - 8.69 lps; 3 kg./sq.cm - 10.64 lps; 4 kg./sq.cm - 12.29 lps; wetting radius as 34.7 mtrs to 45 mtrs.

impact pop up 1/2" female inlet, heavy duty plastic adjustable sprinkler 3.2 mm. nozzle & plastic heavy duty housing, operating pressure 2 kgf to 4 kgf. flow= 570 to 810 lph. with 4 elbow swing join

SCREEN FILTER Y TYPE 3" METAL - 50 CUMH. IS:12785 100 TO 120MICRON

pressure gauge 2" gly. Filled

Media filter 3.0" horizontal is 14606, bsp flanged 100 mic; maximum operating pressure 10 kgf. silica sand media no. 16 & 98% purity - 0.7 mm. to 1.2 mm., ms. body 50 cumh. IS:14606

Control valve made of rigid pvc. compound compact double union type with nitrile rubber o ring, ptfe seat ring, solvent weld.

Control valve made of rigid pvc. compound compact double union type with nitrile rubber o ring, ptfe seat ring, solvent weld .

4" size professional grade plastic solenoid valve 24 vac

Commercial controller 6 station plastic cabinet, transformer input 240 vac 50/60 hz, output = 24 va

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 100 mm dia. gun metal foot valve at position with necessary materials complete.

Supplying & erecting minimum three & above star rated Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 22.5 KW/30 HP with discharge 1700/400 Litres per Minute (LPM) for head of 48/69 m and 100mm suction/ 80mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP (CRICKET,HOCKEY,FOOTBALL,IRRIGATION)

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set up to 30 HP consisting of Star Delta starter having relay range 30-50 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

1 "Sewage Treatment Plant 300kld MBR type " Design, supplying, installing, testing & commissioning of Sewage Treatment Plant for the following duty:Nature of effluent - Domestic Sewage Daily average flow - 12.5 Cum / hr,pH - 6.0 – 8.5,BOD at 27 Deg C - 100 – 450 mg/L,T.S.S.- 200 – 450 mg/L,COD - 300 – 600 mg/L,Oil & Grease -50- 100 mg / L,Total Phosphorus - 15 mg/L,Total Nitrogen - 75 mg/L Alkalinity Minimum - 250 ppm,Outlet water parameter,pH - 7.5 – 8.5,BOD3 - Less than 5 mg/L,T.S.S. - Less than 10 mg/L,Turbidity - Less than 3 NTU,COD - Less than 10 mg/L,Oil & Grease - Less than 2 mg / L E. coli - B.D.L (Below Detectable Level),Total Phosphorus - Less than 5 mg/L,Total Nitrogen - Less than 10 mg/L,nos SS 304 Bar screne. Punched hole,screen of 2mm size,2 nos. Sewage lift pump 2 nos. Twin lobe Air blower ,4 nos. sludge pumps ,2 nos. Filter feed pumps,2 nos. Treated water transfer pump ,1no Electrical Control panel with 100A FP ATS,4no Membrane installation. 1no Ozone dosing ,14no Necessary multiport valve filters,Filter Press / Centrifuge 0.75 kw,100m NECESSARY PIPING OF UPVC SCH 80 orHDPE except Air Blower WHICH WILL BEIN GI/MS Membrane porosities of 0.035 microns: GE /SUEZ / Siemens Sewage treatment plant shall include the following items: 2no Screen chamber ,Oil & Grease Trap with Skimmer 1hp,Sewage equalization tank/sump ,Fine Screening ,Aeration Tank ,Anoxic Tank ,MBR tanks ,Sludge Holding Tank with Supernatant valve. Treated Water Tank ,Plantroom Sump Platform and foundation for tanks and equipment Ladder, Cat work, Inserts, flanges, manhole cover etc. Electrical Panel & Cabling. Common plant room adjacent to STP.,Providing, fixing & Testing of online Instruments in MBR-Sewage Treatment System. As per MBR supplier requirement. Pressure Indicators for Pumps.,Rotameter for Online flow indicator. MOC : SS Float with PTFE glass,Electromegnetic type Flow Meter on STP inlet,Differential Pressure Transmitter (-15to +15 PSI) Air flow transmitter on MBR Module air Line ,Electrical Actuated Valves (Diffuser Control Valves) ON/OFF type (65 mm size),Level Switch,Vacuum Gauge ,Turbidity Meter ,DO meter ,Online Monitoring system Providing & fixing of online monitoring system comprising of following : Analyzer type : Cabinet type & multiparameter Measuring principal,a) COD/BOD/TSS/PH,Make: Premiertech/wastech/Xylem Two years DLP with opearation including CSMC & operation for 5years to be quoted after DLP 3rd year 4th year 5th year 6th year 7th year

Supply, installation, testing and commissioning of dual media, deep bed vertical down flow pressure filter consisting of Stainless steel vertical Self Supporting type pressure vessel with Supporting Media frontal pipe(MS/GI) work and valves, differential pressure gauges and all required accessories. Flow- 60 m3/hr Filteration Velocity-15 m3/m2/Hr Shell/Dish Thickness - 6/6 Thickness Internal arrangement - Plate with PP Strainer with Box pipe support Media- Sand, Pebbles,Etc. Opearting Pressure-3.5 kg/cm2 Testing Pressure-5 kg/cm2 Make- PTBr Supply, installation, testing and commissioning of Activated Carbon Filter, media, deep bed vertical down flow pressure filter consisting of Stainless steel vertical Self Supporting type Activated Carbon filter with carbon and supporting media, frontal pipe(MS/GI) work and valves, differential pressure gauges and all required accessories. Flow- 60 m3/hr Filteration Velocity-15 m3/m2/Hr Shell/Dish Thickness - 6/6 Thickness Internal arrangement - Plate with PP Strainer with Box pipe support Media- Supporting sand and Carbon Opearting Pressure-3.5 kg/cm2 Testing Pressure-5 kg/cm2 Make- PTBr "Sodium silicate chlorine dosing system consisting of 20 lts capacity polyethylene tank mounted with adjustable flow electronic metering pump suitable for dosing 2.5 lph at 3.5 kg/cm2 pressure, complete with connecting pipe, foot valve and strainer, level tube, level switch, cable, non return valve and all accessories Make- Asia LMI "WTP feed pump for rain water treatment Fixed speed In-line, vertial multistage, centrifugal clear water pumps, speed upto 2900 rpm, with CI body, S.S 304 impeller and SS-304/410 shaft, C.I. Base with epoxy coating , connected to a TEFC motor (with mechanical seal) suitable for 380 / 440 volts, "For feeding raw water to water treatment plant and store in soft / treated domestic water tank Capacity/Flow Rate - 500LPM VERTICAL INLINE PUMP Head - 50.00 MWC 1 Set = 3 Nos. Pump (2 Working + 1 Standby) 8hr working Location - PUMP ROOM Suction head - Positive suction Make- Wilo/Kirloskar/eq "Electrical Starter panel composite for one set of pumps complete with individual pump isolators, contactors, control contactors,O/L Relay with Single phasing preventer , earth leakage relay, dry run trip relay, ON-OFF and Trip Indicating lamps, automatic Set of accessories such as G.I headers for suction and discharge, control valves, non return valves, Flow switches, pressure switches, pressure gauge, inter connecting power and control cabling etc.and all required instumentation complete shall be include Make of Panel- PTBr Two years DLP with opearation including CSMC & operation for 5years to be quoted after DLP 3rd year 4th year 5th year 6th year 7th year

"S/I/T/C/ OF Automated Composter Composter Vessel: UV protected roto-moulded HDPE plastic vessel, with insulation foam material. Rested on rubber coated rollers with heavy duty fabricated frame.Configuration:(2000 lit x 4 drums) Motor for vessel rotation:7.5 HP 3-Phase Heavy duty geared motor,Mode of rotation:Ring gear system. 2 Units S/I/T/C/ OF Integrated Bio-Waste Shredder Shredder Capacity:1000 kg of Wet Organic Waste,Shredder Contact Surfaces: SS 304,Shredder Non-Contact Surfaces:Epoxy coated MS,Shredder Motor:7.5 HP 3-Phase Motor,Make Crompton or equivalent 2 Units S/I/T/C/ OF Electric Panel, Electrical Components: ISI Make Safety Measures: "Control panel with emergency start/stop button, protective cover for shredder and blade parts etc 1 Set" S/I/T/C/ OF Compost Curing Pits Dimensions = 10 x 4 x 4 fts Powder coated MS fabricated pits, interlined with shade net cloth. Capacity = 2.5 ton raw material per pit 8 units Two years DLP with opearation including CSMC & operation for 5years to be quoted after DLP 3rd year 4th year 5th year 6th year 7th year

(Hydropneumatic Pumping System With Variable Frequency Drive) Supply, Installation, Testing and Commissioning of compact packaged type skid mounted, self-contained variable frequency drive hydropneumatic system complete as per the technical specification complete as required: (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class "F" insulation & efficiency class IE-4, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 Hz A.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. (ii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 3 times the vessel operating pressure and prototype cycle tested for 80,000 cycles with charging connections to discharge pipe line with necessary flanges, gaskets, isolating valve, nuts/ bolts etc. with suitable foundation bolts etc complete as required. (iii) Microprocessor based multi pump controller/panel with graphical display and variable frequency drive with each pump (VFD) mounted inside a panel complete with pressure sensor transmitter. The graphical display capable to show number of pumps running & also communicate with other controllers following with open protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. The panel should also have provision for manual / automatic alternate (cyclic) operation of pumps, ON/OFF switch complete as required. Pumps shall be Factory Acceptance Test. (v) Necessary foundation bolts, vibration elimination pads etc complete as required. Domestic water hypn pump Water Supply Pumps No. of Pumps: 3 nos. (2 W + 1 S) Capacity: 60m3/hr of Each Pump Head: 140 Meters Air Vessel: 200 Ltr tank X 3no

(Hydropneumatic Pumping System With Variable Frequency Drive) Supply, Installation, Testing and Commissioning of compact packaged type skid mounted, self-contained variable frequency drive hydropneumatic system complete as per the technical specification complete as required: (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class "F" insulation & efficiency class IE-4, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 Hz A.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. (ii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 3 times the vessel operating pressure and prototype cycle tested for 80,000 cycles with charging connections to discharge pipe line with necessary flanges, gaskets, isolating valve, nuts/ bolts etc. with suitable foundation bolts etc complete as required. (iii) Microprocessor based multi pump controller/panel with graphical display and variable frequency drive with each pump (VFD) mounted inside a panel complete with pressure sensor transmitter. The graphical display capable to show number of pumps running & also communicate with other controllers following with open protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. The panel should also have provision for manual / automatic alternate (cyclic) operation of pumps, ON/OFF switch complete as required. Pumps shall be Factory Acceptance Test. (v) Necessary foundation bolts, vibration elimination pads etc complete as required. Domestic water hypn pump Water Supply Pumps No. of Pumps: 3 nos. (2 W + 1 S) Capacity: 45m3/hr of Each Pump Head: 140 Meters Air Vessel: 200 Ltr tank X 3no

Supplying & erecting solenoid valve with low & high float switches for over head tank domestic and flushing as per drawing with control panel

Two years DLP with opearation including CSMC & operation for 5years to be quoted after DLP

3rd year

4th year

5th year

6th year

7th year

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting PVC box trunking of size 75x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .

Supplying and erecting PVC slotted box trunking of size 45x30 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX.

Supplying and erecting PVC slotted box trunking of size 100x100 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch one way 16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket two gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table.

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 10 pair, 0.5mm dia, jelly filled unarmoured telephone copper cable with poly-al laminate moisture barrier, laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete.

Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 3 x 8 extensions complete.

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying & installing expansion cabinet for extension of digital hybrid EPABX to expand system by 32 ports with programming and configuration of extensions and Direct lines with required accessories complete.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 LSZH cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 cable with rodent proof and anti termite jacket suitable for networking as per specification No. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.

Supplying and installing armoured single mode optical fibre cable 12 fiber, core dia 50/125μm. (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying, fixing, and configuring 20 (1G-RJ45) ports + 4 combo 1G ports + 4 10G (SFP+) ports, Layer 3 switch, SI Image, 6KV surge protection on ethernet port and console port for management erected in provided rack complete.

Supplying, fixing, and configuring 24 ports + 4 (SFP+) port, Managed Layer 2, POE Switch of , 370W, 6KV surge protection on ethernet port and console port for management erected in provided rack complete.

Supplying, fixing, and configuring 48 Ports managed gigabit switch 10/100/1000 Mbps + 4 SFP ports erected in provided rack complete.

Supplying, fixing, and configuring 48 ports managed gigabit switch Layer 2 with 48 10/100/1000 Base-T ports management switch with 4 10GE SFP+ ports erected in provided rack complete.

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing tool-less shutter keystone jack (RJ-45) in provided patch panel complete as per specification no. WG-NAS/KJ

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 32 U floor mount server Rack (Dimension-DxWxH - 800X1000x1620 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 6 U IP66 outdoor mount server rack with pole mount bracket (Dimension-DxWxH - 500x600x350 mm) as per specification No. WG-NAS/RAK

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 50W with high transitivity diffuser with system lumens output of Min. 6000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty.

Supplying and erecting integrated LED street light fitting 18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 85-90W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC

Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

Supplying & erecting 20 SWG G.I sheet metal cawl rectangular / round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 800 to 900VA digital pure sine wave inverter with backup time of 0.30 hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as per specification no. AP-INV

Supplying, erecting, testing and commissioning of 2kVA capacity online pure sine wave, with backup time of 0.30 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting, testing and commissioning of 6kVA capacity online pure sine wave with backup time of 0.30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave with backup time of 0.30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 0.30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 0.30 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/80Ah to 88Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete.

Supplying and erecting 12V/100Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete.

Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.

Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 100-125A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 .

Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 400A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 .

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:-As per Foot Note For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:-As per Foot Note For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:-As per Foot Note For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB Note:-As per Foot Note For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Providing & erecting 3 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:-As per Foot Note For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB.

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 2 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 4 pole RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCCB/RCBO

Supplying, installing, testing and commissioning 11 kV 630A, vacuum circuit breaker with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc., as per specification no SW-HTS /VCB

Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 6 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 4 nos. feeder with 4 VCB compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A

Supplying and erecting terminal spreaders suitable for 3 pole, up to 100A MCCB (set of 6)

Supplying and erecting terminal spreaders suitable for 3 pole, 300A- 400A MCCB(set of 6)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A having 25mm (Width) X 5 mm (Thickness) , with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP-BB

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A having 40mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP-BB

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A having 50mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP-BB

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 630A having 50mm (Width) X 10 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP-BB

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 10/5A to 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 40 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying and erecting 50 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC

Supplying and erecting 100 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 400 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 5 %

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CBLT/ CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Note :- For use of FRLS-XLPE insulation instead of FR-XLPE insulated armoured cable increase rates by 2 %

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm. complete on pole as per specification No. CB-SB

Supplying & erecting crimping type copper lugs for cable up to 16 sq mm complete as per specification No. CB-CL/CU

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting hot dipped galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised Perforated type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Supplying and erecting 20 m (clear height) motorized high-mast (Top-150mm, Bottom-410 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3+3 mm thickness, with base plate 25 mm thick x OD 570 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 500 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete specification no. OH-PL/HM (excluding luminaries)

Providing & erecting 5 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic switching of luminaires, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP.

Providing and back filling ground enhancing compound 25 kg bag complete.

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound ,without gas cushioning ,hermetically Sealed transformer, delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with on load tap changer) on load +5 to -10 in steps of 2.5%,having 7 number of tap positions with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-SL.

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

Supplying SMC chequered plates of size 4ft x 2ft, hot press moulded from advanced composites of plastics namely sheet moulding compound of thickness 2.5 mm with insulation level up to 22 kV and fixing it to substation floor with SR-998 adhesive along with 5 mm thick E.P. foam complete.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 750 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 126.4 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 990 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 500 kVA up to 750 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Supplying, erecting testing and commissioning heat detector with combination "ROR and Fixed Temp." complete as per specification no. FF-FAS/HD

Supplying, erecting testing and commissioning optical type smoke detector on suitable back box with necessary connections complete as per specification no. FF-FAS/SD

Supplying, erecting testing and commissioning beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m.

Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU 1) For item no.13-9-10 to 13-9-13 increase rate by 2% for FRLS

Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2 Character LCD Display, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC, 0 - 49 Deg C, 93 ± 2 Percentage RH (non- condensing) at 32 ± 2 Deg C complete as per specification no. FF-FAAS/FACP

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 1 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 20 m raising lowering high mast) .

SITC of Electric Traction Passenger Lift with Rated capacity :- 4 Passenger/272Kg , Floors :- G+1 floor (2 Stops/2 Landings), Travel :- 3 to 5 mtrs, Location of Lift Machine:- MR/MRL , Rated speed :- 1.0 mps VS Car/Landing door clear opening of 700/800 mm wide x 2000 mm high Clear Car size of 900mm wide x 850mm deep x 2250mm high, Lift shaft available having clear size of 1550mm wide x 1900mm deep, 1600mm Pit depth, 4200mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames. The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. ARD complete with necessary SMF VRLA batteries. Fireman controller having fireman switch at fire Landing. CCTV surveillance system comprises of 2 nos minimum 2.0 MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete.

Design, manufacture, supply, installation, testing and commissioning of SS LT PANEL-1 IP43 panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-43 WITH DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.1000A, 50kA MCCB Microprocessor based with SC & OL releases 1250 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 630 A, 4P, 36kA MCCB, 02 nos. 160 A, 4P, 36kA MCCB, 02 nos. 100 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of SS LT PANEL-2 IP43 panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-43 WITH DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.1000A, 50kA MCCB Microprocessor based with SC & OL releases 1250 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 630 A, 4P, 36kA MCCB, 02 nos. 320 A, 4P, 36kA MCCB, 01 nos. 160 A, 4P, 36kA MCCB, 01 nos. 100 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of SS LT PANEL-3 IP43 panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-43 WITH DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.1000A, 50kA MCCB Microprocessor based with SC & OL releases 1250 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 03 nos. 630 A, 4P, 36kA MCCB, 01 nos. 250 A, 4P, 36kA MCCB, 01 nos. 160 A, 4P, 36kA MCCB, 01 nos. 100 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of SS LT PANEL-4 IP43 panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-43 WITH DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.1000A, 50kA MCCB Microprocessor based with SC & OL releases 1250 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings -1) 02 nos. 400 A, 4P, 36kA MCCB, 01 nos. 250 A, 4P, 36kA MCCB, 01 nos. 160 A, 4P, 36kA MCCB, 02 nos. 100 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-1 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.630A, 36kA MCCB Microprocessor based with SC & OL releases 800 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 630 A, 4P, 36kA MCCB, 02 nos. 100 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-2 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.320A, 36kA ATS Motorised Automatic Changeover Switch 1 No.320A, 36kA MCCB Microprocessor based with SC & OL releases 400 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 01 nos. 125 A, 4P, 36kA MCCB, 01 nos. 100 A, 4P, 36kA MCCB 09 nos. 63 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-3 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.630A, 36kA ATS Motorised Automatic Changeover Switch 1 No.630A, 36kA MCCB Microprocessor based with SC & OL releases 800 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 01 nos. 320 A, 4P, 36kA MCCB, 01 nos. 250 A, 4P, 36kA MCCB 02 nos. 125 A, 4P, 36kA MCCB , 09 nos. 63 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-4 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.630A, 36kA ATS Motorised Automatic Changeover Switch 1 No.630A, 36kA MCCB Microprocessor based with SC & OL releases 800 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 250 A, 4P, 36kA MCCB 01 nos. 125 A, 4P, 36kA MCCB , 09 nos. 63 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-5 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.160A, 36kA MCCB Microprocessor based with SC & OL releases 200 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 100 A, 4P, 36kA MCCB , 02 nos. 63 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-6 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.630A, 36kA MCCB Microprocessor based with SC & OL releases 800 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 630 A, 4P, 36kA MCCB 01 nos. 250 A, 4P, 36kA MCCB , 01 nos. 125 A, 4P, 36kA MCCB 03 nos. 63 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-7 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.400A, 36kA MCCB Microprocessor based with SC & OL releases 630 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 02 nos. 320 A, 4P, 36kA MCCB, 02 nos.125 A, 4P, 36kA MCCB with RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-8 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.400A, 36kA MCCB Microprocessor based with SC & OL releases 630 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 01 nos. 320 A, 4P, 36kA MCCB, 02 nos.125 A, 4P, 36kA MCCB, 02 nos.40 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-9 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.160A, 36kA MCCB Microprocessor based with SC & OL releases 200 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 01 nos. 125 A, 4P, 36kA MCCB ,01 nos. 100 A, 4P, 36kA MCCB , 06 nos. 63 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of EXTERNAL FEEDER PILLAR-10 IP54/55 Outdoor Type Double Door with Canopy panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-54/55 WITH DOUBLE DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.100A, 36kA MCCB Microprocessor based with SC & OL releases 125 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings - 1) 04 nos. 63 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Design, manufacture, supply, installation, testing and commissioning of DG LOAD IP43 panel constructed using 14SWG CRCA sheet and Indoor type (As per IEC60439) The panel should be complete with following switchgears SYSTEM : 415V,50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. INDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-43 WITH DOORS GASKET IP 54 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT RAL SIMENS GREY 7032. CABLE ENTRY : TOP & BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.1250A, 50kA MCCB Microprocessor based with SC & OL releases 1600 A Insulated Bus bar - 3 phase and neutral Aluminium busbars With Multifucntion Meter RYB & On,off, Trip Indication Outgoings -1) 02 nos. 630 A, 4P, 36kA MCCB, 01 nos. 250 A, 4P, 36kA MCCB, 04 nos. 160 A, 4P, 36kA MCCB, 01 nos. 100 A, 4P, 36kA MCCB 06 nos. 63 A, 4P, 36kA MCCBwith RYB indication SC & OL release Metering - Digital Multifuction Meter on incomer as well as outgoing feeders .The panels shall be complete with all accessories, mounting arrangement .

Supply, installation, testing and commissioning of 300 W LED Flood light with required Suitable 10,/30/60 deg beam angle LED Floodlight with system power consumption of the following wattage ratings. Housing made of die cast aluminium for efficient thermal management, sturdiness & corrosion resistance. Laser locatar on fixture should be provided, SS hardware, silicon gasket for IP66 protection, IK08 rated and operating ambient temperature of -10°C to +45°C. Built-in, IP 67 potted electronic LED driver with APFC, 140-270V operating voltage, PF≥0.95, THD ≤10%, Surge Voltage Protection up to 10 kV With Built In SPD, other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied. High efficiency long life LED module mounted on MCPCB with average life shall be L70 B50 50000 hrs, LED efficiency>145-150 LPW, system efficiency ≥ 120 LPW, CRI>70. UV Stabilized symmetrical distribution polycarbonate lens. Tempered protective toughened glass 4 mm, thermal shock and impact resistant (IK-07) fixed to the housing with aluminium frame and SS screws. Wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial is provided with the fixture for precise angular mounting of luminaire. LM 79 report as tested in NABL certified lab & LM 80 report from LED chip manufacturer. Luminaire manufacturers should have in-house facility accredited by NABL & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die-cast housing/Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer.

Supplying and erecting triple pole mini feeder pillar with 500V, 63A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 63A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket having IP54,IK10 protection and slanting top to be erected on provided foundation complete

Supply, Installation,Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, netmetering facility, necessary protections, earthing, with mounted on Aluminium/GI structure (including Strcture) of suitable strength with following components complete as required : a)Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286/IEC61215, IS/IEC61730-Part-1, IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90%at the end of 10 years and 80% at the end of 25 years. b)Power Conditioning Unit (PCU) of 350-800VDC Input voltage range and 400V AC, three phase, 4wire, 50Hz+/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP65 protection and terminationarrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kVgrade armouredpower and control cables between solarmodules,mainpower cable togrid supply PCU unit along with supplying & fixing of necessary channel /conduit lugs and other accessories etc.as required. Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 100 KWp SolarPV Module. Cost of mounting structure, PV cleaning unit, RMS system, additional wiring, Servise Provider related fees, additional load charges, meter and testing charges, additional wiring is included in item.

Supplying, installation, testing & commissioning of 2 zone, voice alarm controller with USB, MP3 player (including 2 zone button paging station) with seamless integration facility with main fire arm panel for voice evacuation complete as required.

Supply, Installation, testing & Commissioning of Single Channel 500W (1X500W) Class-D Amplifier and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection.

Supply, Installation, testing & Commissioning of 6W Ceiling Recessed Speaker with max SPL @1M/1W 88dB . Frequency response of 125Hz-16KHz. The speaker must have a metal grill & tappings at 6W/3W/1.5W. White color speaker with good aesthetics.

Supply, Installation, testing & Commissioning of 6W Ceiling Surface Speaker (Ceiling Speaker + Back Box) with max SPL @1M/1W 88dB . Frequency response of 125Hz-16KHz. The speaker must have a metal grill & tappings at 6W/3W/1.5W. White color speaker with good aesthetics.

Supply, Installation, testing & Commissioning of 6W Wall Mount Speaker with max SPL @1M/1W 90dB . Frequency response of 200Hz-16KHz. The speaker must have a high impact ABS cabinet & tappings at 6W/3W. White color speaker with good aesthetics.

Supply, Installation, testing & Commissioning of 15W Horn Speaker with max SPL @1M/1W 100dB . Frequency response of 400Hz-6KHz. The speaker must have a high impact ABS cabinet & tappings at 6W/3W. White color speaker with good aesthetics.

S/I/T/C of Emergency Manual Override 25 Watt Volume Control with conesealed Backbox and accessories etc.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of fire fighter phone. jack complete as required.

S/I/T/C of Linear Wallwasher Power Consumption 24 W Luminous Flux 1920 Lm @4000 K Color Temperature 2700K/3000K/4000K/5000 K/5700K/ 6500K/RGB/RGBW Beam Angle (50% Imax) 17°/23°/33°/46°/15 x 27°/21 x 53°/25 x 80° Input Voltage DC24 V Protection Class IEC Control DMX/RDM/DALI/Remote/On-Off Power Factor ≥0.95 Housing Extruded aluminum 6063 Cover Toughened glass Dimensions W 1000/W 28 x H61 IP Rating IP66/IP67 IK Rating Adjustable bracket Mounting -35°C-60 °C (-31 F-140 F Operating Temperature THD <10% Lifespan >50,000 Hrs (Ta-35C L70)Certificate BIS/CE/RoHS Features • Unobtrusive appearance design • Strong aviation aluminium housing • Structured design with thermoelectric separation integrated • Definitive and impact-resistant toughened glass Seamless splicing of light, with optical dark-free zone design • Varied options of visually comfortable and precise optical lens • Meets international standards DMX512 protocol

S/I/T/C of Linear Wallwasher Power Consumption 36 W Luminous Flux 1920 Lm @4000 K Color Temperature 2700K/3000K/4000K/5000 K/5700K/ 6500K/RGB/RGBW Beam Angle (50% Imax) 17°/23°/33°/46°/15 x 27°/21 x 53°/25 x 80° Input Voltage DC24 V Protection Class IEC Control DMX/RDM/DALI/Remote/On-Off Power Factor ≥0.95 Housing Extruded aluminum 6063 Cover Toughened glass Dimensions W 1000/W 28 x H61 IP Rating IP66/IP67 IK Rating Adjustable bracket Mounting -35°C-60 °C (-31 F-140 F Operating Temperature THD <10% Lifespan >50,000 Hrs (Ta-35C L70)Certificate BIS/CE/RoHS Features • Unobtrusive appearance design • Strong aviation aluminium housing • Structured design with thermoelectric separation integrated • Definitive and impact-resistant toughened glass Seamless splicing of light, with optical dark-free zone design • Varied options of visually comfortable and precise optical lens • Meets international standards DMX512 protocol

S/I/T/C of Downlighter Wallwasher Power Consumption 24 W Luminous Flux 1920 Lm @4000 K Color Temperature 2700K/3000K/4000K/5000 K/5700K/ 6500K/RGB/RGBW Beam Angle (50% Imax) 17°/23°/33°/46°/15 x 27°/21 x 53°/25 x 80° Input Voltage DC24 V Protection Class IEC Control DMX/RDM/DALI/Remote/On-Off Power Factor ≥0.95 Housing Extruded aluminum 6063 Cover Toughened glass Dimensions W 1000/W 28 x H61 IP Rating IP66/IP67 IK Rating Adjustable bracket Mounting -35°C-60 °C (-31 F-140 F Operating Temperature THD <10% Lifespan >50,000 Hrs (Ta-35C L70)Certificate BIS/CE/RoHS Features • Unobtrusive appearance design • Strong aviation aluminium housing • Structured design with thermoelectric separation integrated • Definitive and impact-resistant toughened glass Seamless splicing of light, with optical dark-free zone design • Varied options of visually comfortable and precise optical lens • Meets international standards DMX512 protocol

Supply, Installation, Testing and Commissioning of LED Linear Flex Wattage : 12W/Mtr Operating Voltage : DC24V CCT : RGBW Beam Angle : 120° IP Rating : IP66 Operating Temperature : -40 to 50°C

Fabrication, Supply, Erection, Testing and Commissioning of 36 Mtrs Lighting high mast including fixed head frame height fabricated as per attached specifications suitable to fix 40 nos. of 800 W luminaries with 10% Additional Capacity, Lightening Arrestor, Double dome LED type aviation obstruction light and Earthing Spikes in Cricket ground, suitable for Wind Velocity of 50 Mtrs/Sec. Total weight of the high mast including head frame weight and caged ladder shall be minimum 5417 KG and also provide Lightning arrester with Aviation obstrction light. The complete system shall be supplied with necessary accessories like foundation bolts, anchor plates etc. The manufacturing plant of high masts shall be accredited with ISO9001, ISO14001 and ISO18001 certification. Complete mast along with accessories as per technical specifications.Cricket

Supply, Installation, Testing & Commissioning of external power lift man rider unit for accessing the head frame suitable for 30 Mtr High Mast. The unit shall be suitable for safe load carrying capacity of 300kg with climb speed not exceeding 9m/min.A trouble free fall arrestor system shall be provided as protection against failure of the main wire rope. The fall arrestor system shall be operated automatically without any manual interference by the intergral power tool system operated with the help integral power tool system operated with the help of suitable winch in the base section of the mast. The manrider cage shall be provided with suitable wheels for easy transportation from one mast to another.Cricket

Design, manufacture, Supply, Installation, Testing and Commissioning of Electrical feeder pillar for high mast with all accessories including required foundation.The Feeder Pillar enclosure shall provide a degree of protection not less than IP-65 in accordance with IS-2147. SYSTEM : 415V,32A,TPN, 50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. OUTDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-65. WITH 3MM THICK FRP CANOPY. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT 631 OF IS 5. STAND WILL BE POWDER COATED BLACK. CABLE ENTRY : BOTTOM [DETACHABLE GLAND PLATE] CABLE SIZE FOR: 32A CIRCUIT 6 SQ.MM [GREY],FOR STARTER 2.5 SQ.MM [GREY] FOR CONTROL 1.5 SQ.MM [GREY] STAND : 40x40x5 M.S.ANGLE TOERANCE ON DIMENSION IS +/-5MM (32A TPN MCB 01, 25A TP CONTACTOR 01, 9A TP CONTACTOR 02, 20A Fuse Base with 02A Fuse Link 3 Nos, 6A Control SPMCB, Overload relay -Range 2-3.3A Cricket

Design, manufacture,Supply, Installation, Testing and Commissioning of Electrical feeder pillar for high mast Sports Lighting Panel with all accessories including required foundation.The Feeder Pillar enclosure shall provide a degree of protection not less than IP-65 in accordance with IS-2147. SYSTEM : 415V, 50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. OUTDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-65. WITH 3MM THICK FRP CANOPY WITH DOORS GASKET IP 65 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT 631 OF IS 5. STAND WILL BE POWDER COATED BLACK. CABLE ENTRY : BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] STAND : 40x40x5 M.S.ANGLE TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No.100A, 15kA FPMCCB with SC & OL releases Bus bar - 3 phase and neutral Aluminium busbars Outgoings - 06 nos. with each outgoing feeder comprising of: a) 1 no. 25A TPNMCB + 1 no. 20A TP contactor b) 10 nos. 16A DPMCB The panels shall be complete with all accessories, mounting arrangement Cricket

Supply, installation, testing and commissioning of 800 W LED Flood light with Sutaible 30/10 deg beam angle and Suitable beam angle LED Floodlight with system power consumption of the following wattage ratings. Housing made of die cast aluminium for efficient thermal management, sturdiness & corrosion resistance. Laser locatar on fixture should be provided, SS hardware, silicon gasket for IP66 protection, IK08 rated and operating ambient temperature of -10°C to +45°C. Built-in, IP 67 potted electronic LED driver with APFC, 140-270V operating voltage, PF≥0.95, THD ≤10%, Surge Voltage Protection up to 10 kV With Built In SPD, other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied. High efficiency long life LED module mounted on MCPCB with average life shall be L70 B50 50000 hrs, LED efficiency>145-150 LPW, system efficiency ≥ 120 LPW, CRI>70. UV Stabilized symmetrical distribution polycarbonate lens. Tempered protective toughened glass 4 mm, thermal shock and impact resistant (IK-07) fixed to the housing with aluminium frame and SS screws. Wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial is provided with the fixture for precise angular mounting of luminaire. LM 79 report as tested in NABL certified lab & LM 80 report from LED chip manufacturer. Luminaire manufacturers should have in-house facility accredited by NABL & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die-cast housing/Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer.Cricket

Fabrication, Supply, Erection, Testing and Commissioning of 36 Mtrs Lighting high mast including fixed head frame height fabricated as per attached specifications suitable to fix 50 nos. of 800 W luminaries with 10% Additional Capacity, Lightening Arrestor, Double dome LED type aviation obstruction light and Earthing Spikes in Athletic & Football Ground, suitable for Wind Velocity of 50 Mtrs/Sec. Total weight of the high mast including head frame weight and caged ladder shall be minimum 5417 KG and also provide Lightning arrester with Aviation obstrction light. The complete system shall be supplied with necessary accessories like foundation bolts, anchor plates etc. The manufacturing plant of high masts shall be accredited with ISO9001, ISO14001 and ISO18001 certification. Complete mast along with accessories as per technical specifications. Athletic & Football Ground

Supply, Installation, Testing & Commissioning of external power lift man rider unit for accessing the head frame suitable for 30 Mtr High Mast. The unit shall be suitable for safe load carrying capacity of 300kg with climb speed not exceeding 9m/min.A trouble free fall arrestor system shall be provided as protection against failure of the main wire rope. The fall arrestor system shall be operated automatically without any manual interference by the intergral power tool system operated with the help integral power tool system operated with the help of suitable winch in the base section of the mast. The manrider cage shall be provided with suitable wheels for easy transportation from one mast to another. Athletic & Football Ground

Design, manufacture, Supply, Installation, Testing and Commissioning of Electrical feeder pillar for high mast with all accessories including required foundation.The Feeder Pillar enclosure shall provide a degree of protection not less than IP-65 in accordance with IS-2147. SYSTEM : 415V,32A,TPN, 50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. OUTDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-65. WITH 3MM THICK FRP CANOPY. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT 631 OF IS 5. STAND WILL BE POWDER COATED BLACK. CABLE ENTRY : BOTTOM [DETACHABLE GLAND PLATE] CABLE SIZE FOR: 32A CIRCUIT 6 SQ.MM [GREY],FOR STARTER 2.5 SQ.MM [GREY] FOR CONTROL 1.5 SQ.MM [GREY] STAND : 40x40x5 M.S.ANGLE TOERANCE ON DIMENSION IS +/-5MM (32A TPN MCB 01, 25A TP CONTACTOR 01, 9A TP CONTACTOR 02, 20A Fuse Base with 02A Fuse Link 3 Nos, 6A Control SPMCB, Overload relay -Range 2-3.3A Athletic & Football Ground

Design, manufacture,Supply, Installation, Testing and Commissioning of Electrical feeder pillar for high mast Sports Lighting Panel with all accessories including required foundation.The Feeder Pillar enclosure shall provide a degree of protection not less than IP-65 in accordance with IS-2147. SYSTEM : 415V, 50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. OUTDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-65. WITH 3MM THICK FRP CANOPY WITH DOORS GASKET IP 65 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT 631 OF IS 5. STAND WILL BE POWDER COATED BLACK. CABLE ENTRY : BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] STAND : 40x40x5 M.S.ANGLE TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No. 63A, 15kA FPMCCB with SC & OL releases Bus bar - 3 phase and neutral Aluminium busbars Outgoings - 06 nos. with each outgoing feeder comprising of: a) 1 no. 20A TPNMCB + 1 no. 20A TP contactor b) 10 nos. 16A DPMCB The panels shall be complete with all accessories, mounting arrangement Athletic & Football Ground

Supply, installation, testing and commissioning of 800 W LED Flood light with Sutaible 30/10 deg beam angle and suitable Beam angle LED Floodlight with system power consumption of the following wattage ratings. Housing made of die cast aluminium for efficient thermal management, sturdiness & corrosion resistance. Laser locatar on fixture should be provided, SS hardware, silicon gasket for IP66 protection, IK08 rated and operating ambient temperature of -10°C to +45°C. Built-in, IP 67 potted electronic LED driver with APFC, 140-270V operating voltage, PF≥0.95, THD ≤10%, Surge Voltage Protection up to 10 kV With Built In SPD, other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied. High efficiency long life LED module mounted on MCPCB with average life shall be L70 B50 50000 hrs, LED efficiency>145-150 LPW, system efficiency ≥ 120 LPW, CRI>70. UV Stabilized symmetrical distribution polycarbonate lens. Tempered protective toughened glass 4 mm, thermal shock and impact resistant (IK-07) fixed to the housing with aluminium frame and SS screws. Wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial is provided with the fixture for precise angular mounting of luminaire. LM 79 report as tested in NABL certified lab & LM 80 report from LED chip manufacturer. Luminaire manufacturers should have in-house facility accredited by NABL & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die-cast housing/Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. Athletic & Football Ground

Supply of IP66 Syemmetric medium beam, 195W LED Floodlight luminaire with system efficacy of 120lm/W.system output should not be more than 23500lm for 195W. Power consumption of luminaire should not exceed 195W. CCT should be 5700K with CRI ≥ 70. The housing should be made of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate.. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire . The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. . The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and COB’s are not permitted. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. 0-10V Dimable driver should be provided. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. Standby Power consumption of luminaire should not exceed 12W. Driver should have short circuit and open circuit protection. Luminaire and Driver both should be BIS approved and CRS no ( individual R no ) should be shared along with LM79 & LM80 during bid submission. Product should have Lifeclass of 50K hours @L70 with PF > 0.95 & THD ≤ 10%..To Ensure proper heat dissipation housing of luminaire should be minimum 500mm X400mm X 100mm and and have a breather ensuring a stable optical and thermal management. Cat No:- BVP483 LED235 CW SMB PSU GR

Supply of IP66 Syemmetric narrow beam, max. 300 LED Floodlight luminaire with system efficacy of minimum 120lm/W.system output should not be more than 38500lm for 300W. Power consumption of luminaire should not exceed 305W. CCT should be 5700K with CRI ≥ 70. The housing should be made of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate.. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire . The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. . The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and COB’s are not permitted. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. 0-10V Dimable driver should be provided. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. Standby Power consumption of luminaire should not exceed 12W. Driver should have short circuit and open circuit protection. Luminaire and Driver both should be BIS approved and CRS no ( individual R no ) should be shared along with LM79 & LM80 during bid submission. Product should have Lifeclass of 50K hours @L70 with PF > 0.95 & THD ≤ 10%..To Ensure proper heat dissipation housing of luminaire should be minimum 500mm X400mm X 100mm and and have a breather ensuring a stable optical and thermal management. Cat No:- BVP485 LED385 CW FLNB A1 or Equivalent

Supply,Testing and commisioning of Multisensor combining motion detection (PIR) and ambient light level detection (PE) in one device. Sensor should operate on DALI protocol for power and communications to a network control system thus eliminating the need for additional network field wiring. Range for lux level sensing 5-10000 lux. Sensor should be powered from Netwok Supply only.Similar to Equivalent to (Philips Model No - DUS90 WHB-D.)

SITC of IP65 Syemmetric medium beam, max. 80W LED canopy luminaire with system efficacy of minimum 120lm/W.system output should not be more than 1000lm for 80W. Power consumption of luminaire should not exceed 80W. CCT should be 5700K with CRI ≥ 70. The housing should be made of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 65 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate.. The Luminaire should have a 4KV SPD duly bolted in the Luminaire .The luminaire should be of Class B Serviceability. Driver should have short circuit and open circuit protection. Luminaire and Driver both should be BIS approved and CRS no ( individual R no ) should be shared along with LM79 & LM80 during bid submission. Product should have Lifeclass of 50K hours @L70 with PF > 0.95 & THD ≤ 10%..product is designed to operate at (-10) Deg to45deg operating temp. 50,000 Hrs burning life is provided as per L70B50.

Fabrication, Supply, Erection, Testing and Commissioning of 30 Mtrs Lighting high mast including fixed head frame height fabricated as per attached specifications suitable to fix 32 nos. of 800 W luminaries with 10% Additional Capacity, Lightening Arrestor, Double dome LED type aviation obstruction light and Earthing Spikes in Hockey Ground, suitable for Wind Velocity of 50 Mtrs/Sec. Total weight of the high mast including head frame weight and caged ladder shall be minimum 5417 KG and also provide Lightning arrester with Aviation obstrction light. The complete system shall be supplied with necessary accessories like foundation bolts, anchor plates etc. The manufacturing plant of high masts shall be accredited with ISO9001, ISO14001 and ISO18001 certification. Complete mast along with accessories as per technical specifications.Hockey Arena

Supply, Installation, Testing & Commissioning of external power lift man rider unit for accessing the head frame suitable for 30 Mtr High Mast. The unit shall be suitable for safe load carrying capacity of 300kg with climb speed not exceeding 9m/min.A trouble free fall arrestor system shall be provided as protection against failure of the main wire rope. The fall arrestor system shall be operated automatically without any manual interference by the intergral power tool system operated with the help integral power tool system operated with the help of suitable winch in the base section of the mast. The manrider cage shall be provided with suitable wheels for easy transportation from one mast to another. Hockey Arena

Design, manufacture, Supply, Installation, Testing and Commissioning of Electrical feeder pillar for high mast with all accessories including required foundation.The Feeder Pillar enclosure shall provide a degree of protection not less than IP-65 in accordance with IS-2147. SYSTEM : 415V,32A,TPN, 50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. OUTDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-65. WITH 3MM THICK FRP CANOPY. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT 631 OF IS 5. STAND WILL BE POWDER COATED BLACK. CABLE ENTRY : BOTTOM [DETACHABLE GLAND PLATE] CABLE SIZE FOR: 32A CIRCUIT 6 SQ.MM [GREY],FOR STARTER 2.5 SQ.MM [GREY] FOR CONTROL 1.5 SQ.MM [GREY] STAND : 40x40x5 M.S.ANGLE TOERANCE ON DIMENSION IS +/-5MM (32A TPN MCB 01, 25A TP CONTACTOR 01, 9A TP CONTACTOR 02, 20A Fuse Base with 02A Fuse Link 3 Nos, 6A Control SPMCB, Overload relay -Range 2-3.3A Hockey Arena

Design, manufacture,Supply, Installation, Testing and Commissioning of Electrical feeder pillar for high mast Sports Lighting Panel with all accessories including required foundation.The Feeder Pillar enclosure shall provide a degree of protection not less than IP-65 in accordance with IS-2147. SYSTEM : 415V, 50HZ SUPPLY. CONSTRUCTION: FABRICATED OUT OF 14 G CRCA SHEET STEEL. OUTDOOR TYPE, STAND MOUNTING, DUST & VERMIN PROOF, IP-65. WITH 3MM THICK FRP CANOPY WITH DOORS GASKET IP 65 NEOPRENE. PAINTING : PANEL CUBICLE WILL BE POWDER COATED AFTER PRETREATMENT. SHADE OF PAINT 631 OF IS 5. STAND WILL BE POWDER COATED BLACK. CABLE ENTRY : BOTTOM [DETACHABLE GLAND PLATE 3.0 mm] STAND : 40x40x5 M.S.ANGLE TOERANCE ON DIMENSION IS +/-5MM Incomer - 1 No. 63A, 15kA FPMCCB with SC & OL releases Bus bar - 3 phase and neutral Aluminium busbars Outgoings - 06 nos. with each outgoing feeder comprising of: a) 1 no. 20A TPNMCB + 1 no. 20A TP contactor b) 10 nos. 16A DPMCB The panels shall be complete with all accessories, mounting arrangement Hockey Arena

Supply, installation, testing and commissioning of 800 W LED Flood light with Sutaible 30/60/10 deg beam angle and Suitable Beam Angle LED Floodlight with system power consumption of the following wattage ratings. Housing made of die cast aluminium for efficient thermal management, sturdiness & corrosion resistance. Laser locatar on fixture should be provided, SS hardware, silicon gasket for IP66 protection, IK08 rated and operating ambient temperature of -10°C to +45°C. Built-in, IP 67 potted electronic LED driver with APFC, 140-270V operating voltage, PF≥0.95, THD ≤10%, Surge Voltage Protection up to 10 kV With Built In SPD, other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied. High efficiency long life LED module mounted on MCPCB with average life shall be L70 B50 50000 hrs, LED efficiency>145-150 LPW, system efficiency ≥ 120 LPW, CRI>70. UV Stabilized symmetrical distribution polycarbonate lens. Tempered protective toughened glass 4 mm, thermal shock and impact resistant (IK-07) fixed to the housing with aluminium frame and SS screws. Wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial is provided with the fixture for precise angular mounting of luminaire. LM 79 report as tested in NABL certified lab & LM 80 report from LED chip manufacturer. Luminaire manufacturers should have in-house facility accredited by NABL & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die-cast housing/Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. Hockey Arena

Supply, Installation,Testing & Commissioning of IP Dome camera with 1/2.8" CMOS, Progressive Scan, HD 720P Horizontal Resolution, Dual H.264 streaming, 25 FPS, 2.8mm- 10mm varifocal auto iris lens, 0.01 lux,Tamper detection,Wide dynamic Range, 3D Noise reduction, PoE & standard 12VDC/24VAC power input, Indoor surface mount enclosure, Mounted on True Ceiling / False ceiling as per site requirement IP67, IK10 (including required accessories), UL Listed Or Equivalent. Camera Shall be ONVIF compliant.(Inside Building)

Supply, Installation,Testing & Commissioning of IP Fixed Box/ Bullet camera with 1/2.8" CMOS, Progressive Scan, Day/Night, HD720P Horizontal Resolution , Dual H.264 streaming, 25 FPS, 2.8mm-10mm varifocal auto iris IR corrected megapixel lens, 0.05 lux Day/Night, Tamper detection, Wide dynamic Range, 3D Noise reduction, PoE & standard 12VDC/24VAC power input, IP67, IK10 rated vandal resistant enclosure, UL Listed Or Equivalent. Camera Shall be ONVIF compliant. (Inside Building)

Supply, installation, testing and commissioning of 4MP AI IR Network Bullet Camera , 1/1.8” 4MP PS CMOS Image Sensor (1.411 cm), Max. outputs 4MP(2688×1520)@50fps/60fps, Instastream /H.265/ Smart H.264+/H.264 coding, Five streams for three-channel HD video, WDR(140dB), Day/Night (ICR), 3D-DNR, EIS, Defog, ROI, AWB, AGC, BLC, HLC, 8mm ~ 32mm Motorized lens, IR Range of 120 Mtrs, IP67, IK10, Micro SD Card, ePoE, PoE+, With deep learning algorithm, it supports people counting, face, recognition, perimeter protection etc, Mobile Software, CMS Software (External)

Supply, installation, testing and commissioning of 4MP WDR 32x IR Network PTZ Camera 1/2.8” 4MP CMOS Image sensor (0.9071 centimeters), Max. 25/30fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom • WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC, AWB, BLC, HLC, Up to 300 Presets, 5 Auto scan, 8 Tour, 5 Pattern, Support Starlight Technology IR Range of 175 Mtr. • Max 300°/s pan speed, 360° endless pan rotation Deep-learning-based auto tracking and perimeter protection SMD PLUS • Built-in 2/1 alarm in/out, IP67, IK10, Micro SD Card, PoE+ • Support Face Detection, Mobile Software CMS Software (External)

Supply, installation, testing and commissioning of 4MP IR AI Enforcement Camera, 1/1.8" 4 MP starlight CMOS sensor (1.411 cm), H.265 and H.264 dual codec, Maximum Resolution: 2688 × 1520@25/30fps, Built-in 10mm~50mm lens, The maximum illumination distance is 30 Mtr, IP67, IK10 Rated, Adopts Oem developed algorithms to recognize license plate numbers and letters of all vehicals etc complete (External)

Supply, installation, testing and commissioning of 4 MP Full HD WDR IR Vandal Dome Camera - 30Mtr. , 1/3” 4MP PS CMOS Image Sensor (0.84667cm), Max 25/30fps@4MP , Instastream, H.265, H.264+ Dual Stream Coding , Support Starlight Technology, WDR(120dB), Day/Night(ICR), 3D-DNR, ROI, AWB, AGC, BLC, HLC 3.6mm lens (2.8mm Optional) , IR Range of 30 Mtrs, IP67, IK10, PoE, SD Card , Mobile Software: iCMOB, gCMOB, CMS Software: KVMS Pro (Entry Of the Building)

Supply, installation, testing and commissioning of 10 Ports Switch with 8 Gigabit PoE Ports & 2 Gigabit Uplink Ports,2 SFP Ports, 8, 1000Mbps; RJ45 ports; Max. 30W Output of Single PoE Port, 2 x 1000Mbps, RJ45 ports 2 x 1000Mbps SFP Port, Supports IEEE802.3i/802.3u/802.3x/802.3af/802.3ab/ IEEE 802.3z, Transmission Distance: default: 0-100m, Easy and safe installation

Supply, installation, testing and commissioning of 16 Ports Switch with 16 Gigabit PoE Ports & 2 Gigabit Uplink Ports, 2 SFP Ports, 8, 1000Mbps; RJ45 ports; Max. 30W Output of Single PoE Port, 2 x 1000Mbps, RJ45 ports 2 x 1000Mbps SFP Port, Supports IEEE802.3i/802.3u/802.3x/802.3af/802.3ab/ IEEE 802.3z, Transmission Distance: default: 0-100m, Easy and safe installation

Supply, installation, testing and commissioning of Road CCTV Poll Fabricated Brackets for Camerra Mounting with powder Cotting

Supply, installation, testing and commissioning of - Fabricated Camera Housing for Safty Perpose

Supply, installation, testing and commissioning of Wall Fabricated Brackets for Camerra Mounting with powder Cotting

Design, Supply, testing, installation and commissioning of modular 16 channel 1080P NVR, Recording: 1920X1080P, 15 FPS, 30 days recording, 24 hours/day; Real time monitoring with 25 FPS. Hard disc : 8 SATA III Ports, Each 6TB , up to 48TB, 1 eSATA port, Disk array: Support RAID 0/1/5/6/10, Two no’s of RJ -45 10/100/1000 Mbps self adaptive Ethernet interface, RS 232, RS 485, keyboard interfaces, VGA/HDMI compatible, 2nos front USB 2.0 & 1 no at rear USB 2.0 compatible & 8 TB hard disc and as per storage configuration contractor shall consider the separate hard discs

Design, Supply, testing, installation and commissioning of modular 32 channel 1080P NVR, Recording: 1920X1080P, 15 FPS, 30 days recording, 24 hours/day; Real time monitoring with 25 FPS. Hard disc : 8 SATA III Ports, Each 6TB, up to 48TB, 1 eSATA port, Disk array: Support RAID 0/1/5/6/10, Two no’s of RJ -45 10/100/1000 Mbps self adaptive Ethernet interface, RS 232, RS 485, keyboard interfaces, VGA/HDMI compatible, 2nos front USB 2.0 & 1 no at rear USB 2.0 compatible & 12 TB hard disc and as per storage configuration contractor shall consider the separate hard discs.

Design, Supply, testing, installation and commissioning of modular 64 channel 1080P NVR, Recording: 1920X1080P, 15 FPS, 30 days recording, 24 hours/day; Real time monitoring with 25 FPS. Hard disc : 8 SATA III Ports, Each 6TB, up to 48TB, 1 eSATA port, Disk array: Support RAID 0/1/5/6/10, Two no’s of RJ -45 10/100/1000 Mbps self adaptive Ethernet interface, RS 232, RS 485, keyboard interfaces, VGA/HDMI compatible, 2nos front USB 2.0 & 1 no at rear USB 2.0 compatible & &16 TB hard disc and as per storage configuration contractor shall consider the separate hard discs.

Supply, installation, testing and commissioning of Seagate Skyhawk AI 8TB Video Internal Hard Drive HDD €“ 3.5 Inch SATA 6 Gb/s 256 MB Cache for DVR NVR Security Camera System

Supply, installation, testing and commissioning of Inch 127cm (50) inch TV UHD Resolution 3840 X 2160 (UHD), Backlight Unit Type Direct Brightness 400nit, Dynamic Contrast Ratio (Dynamic MCI (Hz)) 1,000,000:1 Static (Panel) Contrast Ratio 5000:1 Refresh Rate 60Hz Color Depth 1.07 Billion Colors (10 bit)

Supplying, erecting, testing and commissioning of Keyboard with Wireless Mouse For NVR

Supply, installation, testing and commissioning of SFP Connectors - Product Dimensions ‎13.72 x 11.94 x 0.76 cm; 4.54 Grams , Colour Screen ‎No Voltage ‎5 Volts, Batteries Included ‎No, Batteries Required ‎No Number of Ports ‎1, Connector Type ‎Ethernet, Has Auto Focus ‎No Includes Rechargeable Battery ‎No, Includes remote ‎No Programmable Buttons ‎No, Item Weight ‎2.54 g

Supply, installation, testing and commissioning of Fiber Optical Joint Termination Encloser Box with ofc Slicing Tray

Supply, installation, testing and commissioning of 1Gbps media convertor, 10 Km Single mode-mode Media Converter, Built-in a 2-port switch that supports modified cut-through frame forwarding packet forwarding system, Supports IEEE802.3u 100BASE-TX, 100BASE-FX (Fast Ethernet, 100Mbps), Built-in 128KB RAM data buffer, auto MDI-MDIX function, LED display for link/activity, full/half, 10/100M

Supplying, erecting, testing and commissioning of OFC Slicing with 2 Year Warranty Support

Supply of Miscellaneous accessories , connectors required for completion of the project and demo whenever required atlist 5 times during DLP period as per contract.

Shubham EPC Private Limited (BID ID -6372810)