ADDN OR ALTN TO CERTAIN SMQS AND PROVN OF INTERLOCKING AND REPAIRS OF BR NATURE WORK AT SMC AT AF STN SURATGARH

Amount

BOQ (ADDN/ALTN TO CERTAIN SMQS AND PROVN OF INTERLOCKING AND REPAIRS OF B/R NATURE WORK AT SMC AT AF STN SURATGARH)

Dismantling of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work (old serviceable bricks obtained from dismantled item shall be reused ) straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

M&L for factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed by Engineer-in- charge

M&L for factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed by Engineer-in- charge.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work, complete all as specified and as directed by Engineer-in- charge.

S&F factory made plain framed panelled shutter 35mm thick made out of 2nd class hard wood with lock rail and panel (two panels) inserts of 9mm BWP commercial ply. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed by Engineer-in- charge.

Supply & fixing factory made gauged and skeleton shutter 35mm thick made out of 2nd class hard wood kiln seasoned and chemically pressure treated, open rebated and prepared to receive glass, gauze, etc., but divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass, gauze etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); complete all as specified and as directed by Engineer-in- charge. Note: Glass gauze shall be measured and paid tor separately

Supply and fixing solid PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheet reinforced with MS square tube including painting of edges to match with sheet, all as specified & shown in relevant drawing of item No. 8095 in MES Schedule SSR-2010 (Part-II), fixed in opening B13

S&F 30 mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s, complete all as specified and as directed by Engineer-in-Charge

S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified and as directed by Engineer-in- charge.

S&F butt hinges, stainlees steel 100mm long (ISI marked), complete all as specified and as directed by Engineer-in- charge.

Supply and fixing Extruded aluminium alloy handles, 150mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge.

Supply & fixing aluminium anodised sliding door bolts 16mm dia and 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed by Engineer-in- charge.

S&F aluminium powder coated three track sliding window/ventilator of frame 100mmx44mmx1.5mm and sliding shutter of section 40mmx19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, complete all as specified and as directed by Engineer-in- charge. Note:- For measurement purpose area of opening of window shall be taken.

Supply & fixing 3mm thick sheet glass ordinary quality in squares / retangular not exceeding 0.5sqm in each pane and fixed with wooden bead/pin tacked/with oil putty etc. as required or as directed including cutting of glass as per site requirement complete all as specified & directed by Engineer-in- charge.

Supply & fixing 3mm thick figured glass pin head type in squares / retangular not exceeding 0.5sqm in each pane and fixed with oil putty or as directed, complete all as specified & directed by Engineer-in- charge.

S&F Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified & directed by Engineer-in- charge.

Supply and fix in repairs factory made mild steel cupboards shutters 1mm thickness of shutter with frame made from 1.25mm thick sheet including all fittings i.e. mortice lock with handle, buttt hinges, peg set of their,etc including two coat of synthetic paint over prime, complete all as specified & directed by Engineer-in- charge.

S&F stainless steel 25 mm dia thickness 18 gauge curtain rod including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified & directed by Engineer-in- charge.

Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of Brick walls or concrete surfaces, finishing the surface fair and even complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 5mm thick in cement mortar (1:3) onconcrete surface of ceiling, finished fair, even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Preparation of new plastered Internal wall surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Applying Wall care putty 2mm thick in two layers on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b) Two coats of acrylic emulsion (interior) of approved tint/shade (Company Depot Tinted) over a coat of primer (interior) by using paint Roller.

Material and labour for Preparation of old plastered Internal wall surface by complete removal of existing treatment applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Applying Wall care putty 2mm thick in two layers on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b) Two coats of acrylic emulsion (interior) of approved tint/shade (Company Depot Tinted) over a coat of primer (interior) by using paint Roller.

Material and labour for Preparation of new plastered or concrete surface of ceiling surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:- (a) Three coats of white wash by using paint brush.

Applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over new plastered surfaces , including preparation and using primer new surfaces, complete all as specified and as directed by Engineer-in-charge

Material and labour for Preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of pink primer complete all as specified and as directed by Engineer-in- charge.

M&L for preparation of old painted surfaces, of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing etc, filling in crevices and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in- charge.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) of approved tint/colour over a coat of red oxide primer complete all as specified and as directed by Engineer-in- charge.

Use and waste of form work to soffits of suspended slabs such as flat roof slabs, floor slabs, shelf slab, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and as directed by Engineer-in- charge.

M&L for preparing old painted surfaces of steel and iron surfaces, over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in crevices and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in- charge.

Demolition of cement concrete reinforced of any description such as slab/OHT staging, kitchen chimeny, chajjas, fins, shelves, manhole cover etc, including reinforcement cut as required to facilitate demolition and prepare the surface to casting/jointing new including removing rubbish material from building and thrown in low lying empty area at any from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in slabs for resting of water tank supported on walls/precast blocks, deck slabs and the like complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for mild steel TMT bars 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Glazed ceramic coloured tiles (light coloured) of size 300mmx 450mm, 7 to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic light coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed by Engineer-in-Charge.

Dismantling of Stone slabs of any description or thickness in floors, plateform, apron etc laid bedded and pointed in any mortar including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 5 KM but not exceeding 10 KM from the site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut 20mm thick (minimum), Kota stone slab (size of slab not less than 550x500mm for flooring and in single piece for treads of staircase, laid over and including 20 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by Engineer-in-Charge.

M&L for polished kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly, complete all as specified and as directed by Engineer-in-Charge.

Material and labour 18-20mm thickness approved shade granite of minimum size equal to width of slab, machine cut, granite duly factory grinding and polishing (table rubbed and mirror polished) and chamfering/rounding the outer edges, as in cooking platform, in steps, jambs, pillars, window-cills and like laid over and including 20mm thick cement mortar (1:4) screed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including accomodate the hole for gas pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet ingrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified by Engr-in-charge.

S&F in repairs, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, ccomplete all as directed and specified by Engr-in-charge.

S & F in repairs counter wash hand basin vitreous china white oval shape size 440X525X195mm including PVC waste coupling 32mm size, PVC waste pipe 32mm bore complete making good the surface / joints with white cement complete all as directed and specified by Engr-in-charge.

Supply & fixing in replacement stainless steel sink with drainage board made out of 1.00mm thick sheet , kitchen or laboratory with plugs, washers, waste coupling, waste pipe 800mm long, including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement bib tap with Wall Flange cast copper alloy, chromium plated, fancy type, long nose body, with round head/knob, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

S&F in repairs stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc, complete all as specified & directed by Engineer-in-charge.

Supply & fixing 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.

Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

S&F in repairs Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing bib tap with Wall Flange cast copper alloy, chromium plated, with round head/knob, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified & directed by Engineer-in-charge.

S&F in repairs soap dish, brass chromium plated, complete all as specified & directed by Engineer-in-charge.

Supply & fixing in replacement brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 110mm bore uPVC grade ‘A’ as per IS : 13592 pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC stack clamps (interval of 1m) of suitable size & nut bolts including PCC work for grouting and jointing material for joints, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T ) with access door equal or unequal, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 75 mm bore PVC (SWR) bends with access door any radius, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) with access doore qual or unequal, complete all as specified and as directed by Engineer-in- charge.

S&F in repairs 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed

S&F in repairs brass chromium plated grating 125mm dia with hole wate, complete all as specified and as directed by Engineer-in- charge.

Taking up or down GI tubing with all connections and fittings of 15 mm bore complete all as specified and as directed by Engineer-in- charge.

Taking up or down GI tubing with all connections and fittings of 20 mm bore complete all as specified and as directed by Engineer-in- charge.

M&L for cutting chases in brick or concrete wall, floor, ceiling surface etc for cancelled water tubing and making good with pointing in cement mortar 1:3 exc 10cm but not exc. 20cm girth in brick walls etc. complete all as specified and as directed by Engineer-in- charge.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in- charge.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to floor, walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in- charge.

S&F Rotational moulded polyethylene water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and as directed by Engineer-in- charge.

Supply only integral water proofing compound complete all as specified and as directed by Engineer-in- charge.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sq mtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and as directed by Engineer-in- charge.Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

M&L for galvanized iron spout pipe 40mm dia projecting atleast 20cm clear of wall ‘medium grade’ including making holes in walls & making good disturbed surfaces, complete all as specified and as directed by Engineer-in- charge.

S&F peg set of six made of stainless steel complete all as specified and as directed by Engineer-in- charge.

M&L for mild steel framed work as in doors or ladder of angle or other section like MS tubular hollow section with gusset plates, rails, braces, roller and roller plate etc., complete, drilled for fixing of steel sheeting or other covering. Doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing including necessary cutting drilling and welding etccomplete all as specified and as directed by Engineer-in- charge. Steel conforming to Fe-290 Gde-E-165 .

S&F of 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in- charge.

S&F Coloured PVC Board 18/19mm thick Scratch and strain free (weight not less 9 Kg/Sqm or having density of 600 KG per Cum) in Door, Shelves for Kitchen Cabinets, one side plain & other side laminated (Wood Grain Finish) as required, jointed to form cabinet by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for 18/19 mm PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter) and Door catcher (01 no for each leaf), complete all as specified and as directed by Engineer-in- charge. NOTE: (i) Quoted unit Rates are inclusive of PVC board, handles,hinges, screws, Door catcher and adhesive etc. (ii) For measurement purposes the area of board in shelves/door back shall be taken

S&F of stainless steel plate rack size 900x600x200mm made out of 0.6 mm thick sheet including fixing with rawal plug and screw as in repairs, complete all as specified and as directed by Engineer-in- charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area at any distance exceeding 1.5 KM but not exceeding 5 KM from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for 100mm thick cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in floor, finishing cement concrete surface eve and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note:-Glass diving strip shall be measured and paid seperately

Supply only glass dividing strip 38x3 mm thick inserted in floor to confirm design, complete all as specified and as directed by Engineer-in-charge.

Supply and laying/fixing 60 mm thick (M35 grade) precast interlocking tile/paving block factory casted (made by using PVC/ Rubber moulds on Vibrating Table Machine) using grey cement and pigment, prepolished & preglazed, shape haxagon / trigular / zigzag / I-shaped etc, as directed, confirming to relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over and including 25mm thick layer of sand cushining and filling the interstices etc with sand complete all as specified and as directed.

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch socket with sheet, ceiling rose, lamp holder including rusted/broken concealed conduit, junction and sunken boxes etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface complete all as specified and as directed by Engineer-in-Charge.

Taking down unserviceable main switches, DBs, bus bars chambers any capacity including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and as directed by Engineer-in-Charge.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories or carrying to MES store(Accessories or components to be provided free for replacment by department), complete all as specified and as directed by Engineer-in-Charge.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and deposit in store yard for further hanging in its original position or any other location as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing, complete all as specified and as directed by Engineer-in-Charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

M&L for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less than 20/25 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall , ceiling , floor etc, pressed MS Sunken boxes in wall of required size and colour for switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point/Ceiling fan/ Exhust Fan and wall mount fan controlled by one SP switch including making good distrubed surface, complete all as specified and as directed by Engineer-in-Charge. Note :- Cost for MS Sunken Boxes, Hylum sheets are cutting, chieseling and cutting the wall/Ceiling for conduit fixing, making good to existing surfaces (Matching with existing colour) shall deemed to be included in the quoted rate.

All as per Srl item No 92.00 here-in-before but for one bell point controlled by one bell push, complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 92.00 above but for One light Point controlled by 2- Way Switch complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No 92.00 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No 92.00 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and as directed by Engineer-in-Charge.

All as per ser item No 92.00 here-in-before but for one power point 6 pin 15 Amps socket out let and Geyser Point for sheet metal enclosure with 2.5 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLS cable connected to earth dolly, complete all as specified and as directed by Engineer-in-Charge.

All asper item Sl No 92.00 here in with but for AC Point for sheet metal enclosure with 4 Sq mm stranded copper conductor FRLS cable PVC insulated including earth wire 4 Sq mm copper conductor FRLS cable connected to earth dolly, complete all as specified and as directed by Engineer-in-Charge.

S&F switch piano flush button single pole one way 5 amp 240 volts, complete all as specified and as directed by Engineer-in-Charge.

S&F switch piano flush type single pole two way 6 amps 240 volts, complete all as specified and as directed by Engineer-in-Charge.

S&F bell push switch, single pole, one way flush type, 5 Amps, 240 volts complete all as specified and as directed by Engineer-in-Charge.

S&F Socket outlet, flush type 2 in 1, 3 pin, 5 amps, 240 volts complete all as specified and as directed by Engineer-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts complete all as specified and as directed by Engineer-in-Charge.

S&F switch piano flush button single pole one way 15 amp 240 volts, complete all as specified and as directed by Engineer-in-Charge.

S&F Fan step regulator, 120W 230 volts, 50 HZ, AC Supply complete all as specified and as directed by Engineer-in-Charge.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engineer-in-Charge.

S&F of Buzzer, Ding Dong AC. 230 volts,single pole,complete all as specified and as directed by Engineer-in-Charge.

S&F of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engineer-in-Charge.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge.

S&F LED light fitting mirror type 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of LED Bulb, 10 Watts Lumen ≥ 900, Luminous afficacy ≥ 100 Lum/Watt, CCT:WW/NW/CW, CRI > 80 Ra, IP 20 rated, overmoulded plastic housing, polycarbonate diffuser, 4KV surge Protection with over voltage protection withstand upto 440 V (for 10 Minute) with open and short circuit protections as per IS: 16102 with all accessories and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed.

S&F in replacement of LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of LED building security light 30 watt, 230V with lens and toughen glass top.The luminarie should have a color temperature of 6500K, IP 65 complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener complete all as specified and as directed by Engineer-in-Charge.

S&F exhaust fan, steel body AC single Phase. 230V RPM of 300mm sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-Charge.

S&F fresh air fan, PVC body AC single Phase. 230V RPM of size 250mm sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting openning through brick wall 230mm thick built in cement motar suitable for exhaust fan 250&300mm seep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and as directed by Engineer-in-Charge.

M&L as in replacement for submain wiring with two single core 6.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and as directed by Engineer-in-Charge. Note- (a) The three runs of single core 6.00 sqmm cable and specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

S&F Sheet metal Vertical TPN double door DB 4 Way, 415 Volt, TPN with 200 Amps rated bus bar and with neutral, earthing bar and din rail complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosures Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 A 240 V complete all as specified and directed by engr-in-charge.

S&F in replacement of MCCB four poles,100 Amps, breaking capacity 16 KA, confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and Netural current carrying capacity 40 to 63 AMP Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles, current carrying capacity 6 to 32 AMP Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

Taking down existing storage type wate heater of any capacity of any type and size by disconnecting from Power socket, carring out necessary repair and painting including cleaning and inner water tank, removing of hard water deposites and connected back and refixing in original position including testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to wall ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm dia bib tap, Chromium plated cast copper alloy with crutch or butter fly handle, screwed for iron pipe 15 mm bore or for brass ferrule complete all as specified and directed.

Taking down after disconnectIon of existing electric meter any make model and type from wall for check /servicing and same position re-fixing complete all as specified and as directed by Engr-in-charge.

M&L for in replacement of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI Earth wire 4 mm dia by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/s Shubham Enterprises (BID ID -3286068)

DIKSHA ENTERPRISES (BID ID -3285833)

M/S Shree Ram Enterprises (BID ID -3282393)

RATHORE ENTERPRISES (BID ID -3282435)

H S BUILDERS (BID ID -3282064)

Bhawani Enterprises (BID ID -3282430)