GE(S) BTD TOKEN NO 66 OF 2022-23 CERTAIN REPAIR AND MAINTENANCE AT SEWAGE PUMP HOUSE NO 1 TO 7 AND LT PANEL BOARD UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Cleaning & Desludging by removing semi solid sludge from the sump well / pump wells of any capacity at any depth at sewage pump house installation, manually or mechanically in foul condition including all necessary T&P required for removal of sludge and solid contents to any place out side the defence land without any extra cost etc complete all as specified and directed .

Supply only forstable bleaching powder of 25 Kg bags etc complete all as specified and directed .

Cutting / cleaning away all grass, bushes , under growth tree roots , hedges, vegetarian ,branches of trees etc around 10 m radius of installation of pump house to the entire satisfaction of Engineer in charge and disposing the same at a distance upto 50 mtr away from the periphery area etc complete all as specified and directed by Engineer in charge.

S&F in replacement power contactor 3TF 50 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 49 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 48 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 47 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement power contactor 3TF 45 415 V etc including internal wiring in panel complete all as specified and directed .

S&F in replacement Bimettalic relay amp range (70-95A) etc including internal wiring in panel complete all as specified and directed .

S&F in replacement Bimettalic relay amp range (32-50A) etc including internal wiring in panel complete all as specified and directed .

S&F in replacement Bimettalic relay amp range (16-25A) etc including internal wiring in panel complete all as specified and directed .

Supply and fixing in replacement Electronic timer switch (03-60 Sec) suitable for star delta starter 230-440V etc complete all as specified and directed .

S&Fin replacement MCCB 3 pole ,415volt ,adjustable type 63 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 3 pole ,415volt ,adjustable type 125 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 3 pole ,415volt ,adjustable type 200 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 4 pole ,415volt ,adjustable type 200 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 4 pole ,415volt ,adjustable type 250 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement MCCB 4 pole ,415volt ,adjustable type 400 A with breaking capacity 36KA complete all as specified and directed .

S&F in replacement 3 phase , class 0.5, digital panel mounted Volt meter in 96 x 96 Sqmm flush mounted case including internal wiring in panel complete all as specified and directed .

S&F in replacement 3 phase , class 0.5, digital panel mounted Ammeter in 96 x 96 Sqmm flush mounted case including internal wiring in panel complete all as specified and directed .

S&F in replacement for ON LOAD change over switch in sheet metal encloser 415 V with side handle operation of rating 400 amp complete all as specified and directed .

S&F in replacement for ON LOAD change over switch in sheet metal encloser 415 V with side handle operation of rating 125 amp complete all as specified and directed .

M & L for two coats of approved synthetic enamel paint over a coat of red oxide zinc chrome primr including preparation / scrapping of old painted surfaces of the LT panel complete and spray painting the same with etc complete all as specified and directed .

Supply and fixing in replacement of cast iron sluice valve double flanged of size 300 mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron sluice valve double flanged of size 250mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron sluice valve double flanged of size 150mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron sluice valve double flanged of size 100mm PN 1.6 brass spindle with wheel head, in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron NON Return Valve(sluice) double flanged of size 300mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron NON Return Valve(sluice) double flanged of size 250mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

Supply and fixing in replacement of cast iron NON Return Valve(sluice) double flanged of size 150mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed.

Supply and fixing in replacement of cast iron NON Return Valve(sluice) double flanged of size 100mm in underground pump well 9 meter deep with nuts bolts of suitable size and flanged and testing from smooth functioning etc complete all as specified and directed .

S&F in replacement Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 40 mm dia iron pipe complete all as specified and direceted .

S&F in replacement Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm dia iron pipe complete all as specified and direceted .

S&F in replacement 40mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F in replacement 25mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

Disconnecting of defective burnt elect motors and unserviceable pumps after removing all connection like electrical, earthing etc, removing of motors of capacity 05 to 100 HP from foundation with T & P required, taking to civil workshop for repair/strip opening and repairing of pumping sets any make and model including replacement of defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc complete. Reassembling including oiling, greasing replacement of worn out nuts, bolts, gasket etc, refixing on its original position, making all connections, commissioning and testing at full load etc complete all as specified and directed . Note :- (i) Cost of major parts like bearing shaft, bush, impeller gland plate etc shall be measured and paid separately under respective item of schedue. (ii) Cost of other minor item like Thimble ,lugs,connection plate ,lead,gasket, nuts, bolts etc essential for functioning of pump /motor is deemed to be included in quoted rate. (iii) Rewinding/repair of motor shall be measured and paid separately. (iv) Taking down and fixing of new MS frame is deemed to be included in quoted rate.

Supply super enameled copper wire of existing gauge as original including insulation material with insulation class 'B' varnishing in r/o item No. 36 complete all as specified and directed .

Disconnecting of unserviceable pump from motors after removing all electrical/mechnical connections etc of capacity 5 to 100 HP from 9 meter deep underground pump well foundation, taking to civil workshop for repairing of pumping sets any make and model, in which replacement of unserviceable parts such as bearing, bearing cover, shaft, bush, impeller, Gland Bush, coupling etc. Reassembeling the pump and refixing on its original position (9 meter deep underground pump well foundation), making all connections, commissioning and testing at full load complete all as specified and directed . Note : (i) Cost of spare parts (Impeller, Bearing, Gland Bush, Shaft, coupling, bearing cover etc) shall be measured and paid separately under respective item of schedule here after. (ii) Cost of other minor item like gasket, nuts, bolts etc necessary for efficient functioning of pump is deemed to be included in unit rate of item. (iii) Transportation, reconnection & testing, required T & P for work is deemed to be included in quoted rate.

Supply only Gland Bush suitable for pump set of capacity 100 HP pump etc in r/o item No. 38 complete all as specified and directed .

All as per SI item No 39 but of 75 HP capacity .

All as per SI item No 39 but of 60 HP capacity .

All as per SI item No 39 but of 25 /20HP capacity .

All as per SI item No 39 but of 5 HP capacity .

Supply only Gland plate suitable for pump set of capacity 100 HP pump etc in r/o item No. 38 complete all as specified and directed .

All as per SI item No 44 but of 75 HP capacity .

All as per SI item No 44 but of 60 HP capacity .

All as per SI item No 44 but of 25/20 HP capacity .

All as per SI item No 44 but of 5 HP capacity .

Supply only CI Impeller suitable for pump set of capacity 100 HP pump etc in r/o item No. 38 complete all as specified and directed .

All as per SI item No 49 but of 75 HP capacity .

All as per SI item No 49 but of 60 HP capacity .

All as per SI item No 49 but of 25/20 HP capacity .

All as per SI item No 49 but of 5 HP capacity .

S&F in replacement coupling tyre(coupler no. 14,16,18,19,8,8,11) which is suitable for pump set of capacity 100 HP pump etc complete all as specified and directed .

All as per SI item No 54 but of 75 HP capacity .

All as per SI item No 54 but of 60 HP capacity .

All as per SI item No 54 but of 25/20 HP capacity .

All as per SI item No 54 but of 5 HP capacity .

Supply only high carbon steel shaft for existing size for 100 HP Pumping set to prapex size for smooth running complete in r/o item No. 38 complete all as specified and directed .

All as per SI item No 59 but of 75 HP capacity .

All as per SI item No 59 but of 60 HP capacity .

All as per SI item No 59 but of 25/20 HP capacity .

Supply only coupling which is suitable for pump set of capacity 100 HP pump etc in r/o item No. 38 complete all as specified and directed .

All as per SI item No 63 but of 75 HP capacity .

All as per SI item No 63 but of 60 HP capacity .

All as per SI item No 63 but of 25 /20HP capacity .

All as per SI item No 63 but of 5 HP capacity .

Supply only Bearing cover suitable for 100 HP pumping set etc in r/o item No. 38 complete all as specified and directed .

All as per SI item No 68 but of 75 HP capacity .

All as per SI item No 68 but of 60 HP capacity .

All as per SI item No 68 but of 25/20HP capacity .

All as per SI item No 68 but of 5 HP capacity .

Supply only ball bearing cat No 6311 etc in r/o item Nos. 36 & 38 complete all as specified and directed .

Supply only ball bearing cat No 6313 etc in r/o item Nos. 36 & 38 complete all as specified and directed .

Supply only ball bearing cat No 6309 in r/o item Nos. 36 & 38 complete all as specified and directed .

S&F in replacement Gland Packing suitable for 100HP pump in r/o item No. 38 complete all as specified and directed

S&F in replacement Gland Packing suitable for 75HP pump in r/o item No 38 complete all as specified and directed

S&F in replacement Gland Packing suitable for 60HP pump in r/o item No 38 complete all as specified and directed

S&F in replacement Gland Packing suitable for 20/25HP pump in r/o item No 38 complete all as specified and directed

Material and labour for MS work as in plateform/frames . Clamps / base frame made out of angle , channels ,flat iron , MS Sheet including cutting, welding cold or hot , rivetting , locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface etc complete all as specified and directed.

M & L for painting of pumpset with motor with two coat of synthetic enamel paint over a coat of red oxide primer including preliminary preparartion, scrapping old paint with wire brush cleaning of pump set with cotton cloth before painting and writing of SM/MES No all as directed for the following capacities:-

All as per SI item No 81 but of 100 HP capacity .

All as per SI item No 81 but of 75 HP capacity .

All as per SI item No 81 but of 60 HP capacity .

All as per SI item No 81 but of 20/25 HP capacity .

All as per SI item No 81 but of 5 HP capacity .

Preparation / scrapping of old painted surfaces of the DG Set including radiator, fuel tank, alternator assembly etc all parts of DG sets, complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos on DG sets of following capacities etc complete all as specified and directed.

All as per SI item No 87 but of D.G Set 250 KVA

All as per SI item No 87 but of D.G Set 160 KVA

All as per SI item No 87 but of D.G Set 62.5/70 KVA

All as per SI item No 87 but of D.G Set 25/34 KVA

S&F in replacement Air filter (outer) suitable for 250 KVA capacity DG set.

All as per SI item No 92 but of 160 KVA capacity .

All as per SI item No 92 but of 70 KVA capacity .

All as per SI item No 92 but of 62.5 KVA capacity .

All as per SI item No 92 but of 34 KVA capacity .

All as per SI item No 92 but of 25 KVA capacity .

S&F in replacement Air filter (inner) suitable for 250 KVA capacity DG set.

All as per SI item No 98 but of 160 KVA capacity .

All as per SI item No 98 but of 70 KVA capacity .

All as per SI item No 98 but of 62.5 KVA capacity .

All as per SI item No 98 but of 34 KVA capacity .

All as per SI item No 98 but of 25 KVA capacity .

S&F in replacement Oil filter suitable for 250 KVA DG set including changing of engine oil complete all as specified.

All as per SI item No 104 but of 160 KVA capacity.

All as per SI item No 104 but of 70 KVA capacity .

All as per SI item No 104 but of 62.5 KVA capacity .

All as per SI item No 104 but of 34 KVA capacity .

All as per SI item No 104 but of 25 KVA capacity .

S&F in replacement Fuel filter suitable for 250 KVA capacity DG set.

All as per SI item No 110 but of 160 KVA capacity.

All as per SI item No 110 but of 70 KVA capacity .

All as per SI item No 110 but of 62.5 KVA capacity .

All as per SI item No 110 but of 34 KVA capacity .

All as per SI item No 110 but of 25 KVA capacity .

S&F in replacement heavy duty water/coolant rubber hose pipe of any shape as per existing for DG set any capacity all as directed.

S&F in replacement 'V' belt as per existing size suitable for 250 KVA capacity DG set.

All as per SI item No 117 but of 160 KVA capacity.

All as per SI item No 117 but of 70 KVA capacity .

All as per SI item No 117 but of 62.5 KVA capacity .

All as per SI item No 117 but of 34 KVA capacity .

All as per SI item No 117 but of 25 KVA capacity .

Material and labour for disconnecting / dimantling of self starter from DG set 160 KVA capacity by removing all electrical connections and carring out to work shop for replacing the defecting parts, main shafts, bendex, pinion bearing, DE/CE bush, field coil assembly etc greasing and refitting and carrying back and connecting , testing complete all as specified and directed .

Ditto all as per SI item No 123 but of 250 KVA capacity.

Ditto all as per SI item No 123 but of 70/62.5 KVA capacity.

Ditto all as per SI item No 123 but of 34 KVA capacity.

Ditto all as per SI item No 123 but of 25 KVA capacity.

Material and labour for disconnecting / dimantling of dynamo from DG set 25/34 KVA capacity by removing all electrical connections and carring out to work shop for replacing/repair of defective parts like rectifier, carbon brush, replacement of armature winding, repair of commutator etc and refixing the same at site after repair including necessary testing complete all as specified and directed .

All as per SI item No 128 but of 62.5/70 KVA capacity.

All as per SI item No 128 but of 160 KVA capacity.

All as per SI item No 128 but of 250 KVA capacity.

Supply and Replacement of Engine Oil/Lubricant ,20W 40 grade,suitable for Oil change of DG set of any capacity and any make complete all as specified and directed.

Attending complaint of motor/pump/panel at various locations by replacing spare parts/complaints etc complete all as specified and directed . Note :-(i) The contractor or his representative will attand the office of the Engineer-in-Charge daily (working day) at 0930 hours to collect the complaint slip and will provide two mechanics for repair the moter/pump/panel of the same is included in the quoted rate.The complaint will be completed/done within 24 hours from the time of issue of complaint slip, failing which a panel recovery of Rs 300/- per complaint per day will be recovered from contractor due's and contractor will not have any claim on this account. (ii) Spare parts required against rectification/repair will be measured and paid for saperately)

Strip opening of portable pump sets for repair of any make and model of capacity upto 5 HP including replacement of defective / unserviceble parts such as bearing shafts, impeller, bush gland plate, remetalling of shaft for fixing of MS bush / bearing, nuts, bolts etc reassembeling the portable pump, making all connections, commissioning and testing at full load complete all as specified and directed .

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwd the other, or screwed both ends, each screwd end to be fitted with washers and one hexagonal or square nut. Exc 5 cm and not exc 20 cm with neck dia from 5 to 15mm complete all as specified and directed.

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 16 sqmm 4 core complete all as specified and directed

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 95 sqmm 4 core complete all as specified and directed

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 120 sqmm 4 core complete all as specified and directed

M&L in replacement for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade C/S area 240 sqmm 4 core complete all as specified and directed

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 100mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 150mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 250mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed.

Supply and fixing in replacement of cast iron pipes with flanged ends, centrifugally cast, class 'A' of size 300mm in any length fixing with pump house wall, depth of pump house is 9 meter with all clamps, nuts & bolts and T&P required including joint with jain sheet gasket testing after fixing etc complete all as specified and directed .

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Demolition of PCC (unrienforced) concrete of any description and in any positon otherwise specifically provided for and disposal off debris, where directed complete all as specified and directed.

Excavating in post holes each not exc 0.5 Cum in soft/loose of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundation of posts and struts complete all as specified and directed.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reveting etc., confirming to Fe290 gde E-165 complete all as specified and directed.

Fixing only Mild steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reveting etc., confirming to Fe290 gde E-165 complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only 4mm thick chain link MS galvanised fencing having 50 x 50mm fixing to steel fencing post straining bolts etc complete all as specified and directed. (The Weight of chain link shall be decided by BOO)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire etc complete all as specified and directed. (The Weight of chain link shall be decided by BOO)

MS round bar 10 m dia as in line wires for chain link fencing, grade confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

M & L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and on hexagonal or square nut, length of bolt exceeding 30 cm long diameter of nech 12 mm complete all as specified and directed.

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, incl, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (each line wire to be measured).

M&L painting with synthetic enamel paint two coats including redoxide and preparing the new steel surfaces of any description over 10cm in width or girth complete all as specified and directed.

M & L for greasing and oiling for rolling shutter /Gate of any type and size to free moving / opening complete all as specified and directed.

S & F Expanded metal, n.exc 4 Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members incl dismantling of mild steel work of any description incl metal wire fabric of any thickness of mess fixed with steel frame weight n.exc 4 Kg per Sqm mild steel work etc complete all as specified and directed.

S&F Mild steel galvanised wire cloth (weild with flat iron frame) 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) complete all as specified and directed .

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed .

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. complete all as specified and directed.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I). complete all as specified and directed.

Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. Note - Wire gauze / glass to be measured and paid separately.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

S & F in repair (fixing with screws or welding as per site requirement) 300mm mild steel ordinary rat tail rod springs (Helical Springs), including roller & roller plate complete all as specified and directed.

Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and directed.

Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and directed.

Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed. (Note:- WPC shall be measured and paid seperatly).

Supply only intergral water proofing compound complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions complete all as specified and directed.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

M & L for preparation of old plastered or unplastered old decorated surfaces of ceiling by brooming for down or steel wire brushing, scrapping down make spots, trating oily/greasy spots, mass and efflorescence and applying one coat of white wash on ceiling including cornices etc complete all as specified and directed.

M & L for preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying two coat of white wash on walls complete all as specified and directed.

M & L for preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying two coat of Oil Bound distemper white or tinted on walls complete all as specified and directed.

M&L for preparation old previously treated surface of steel and iton work any description over 10 cm width or girth and applying one coat of synthetic enamal paint on old steel surfaces, complete all as specified and directed.

M&L providing cement concrete (RCC/PCC) 1:2:4, type B0 (12.5mm graded agrregate) as in repair of broken or cracked Chhajjas, RCC columns, beams, stairs/steps,PARAPETS etc in one or two layers as required (thickness from 25mm to 40 mm) and finshing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portions and applying neat cement slurry before providing concrete, complete all as specified and directed. (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in three story buildings.

Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Supply and fixing in repair bib taps of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection complete all as specified and directed.

Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed .

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Material and Labour for joint free glazed granite black coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

Demolition of PCC (unrienforced) concrete of any description and in any positon otherwise specifically provided for and disposal off debris, where directed complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L Precast cement concrete type B-1 (1:2:4) as in kerb stone set in CM 1:4 incl necessary moulds / forms work etc complete all as specified and directed.

Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

NASIB ENGINEERS AND CONSTRUCTION