REPAIRS TO GLASS PANE AT KAPRA, BHALRA, GHATIMORE AND NASKA CAMP, CHINTA, CHINCHORA AND JAI GHATI AREA AT BHALRA MIL STN AND REPAIR / MAINTENCE OF SUMMER APPLIANCES AT RAMBAN, BANIHAL, PATNITOP AND NATHATOP AREA UNDER AGE (I) BHALRA

Amount

Taking down shutters exceeding 1 Sqm but not exc 2 Sqm each complete all as specified and as directed by the Engineer-in-Charge

S&F for 30mm thk Flush shutters solid core construction with block board core and two face is covred with decorative face veneer with lipping/frame to match complete all as specified and as directed by the Engineer-in-Charge

S&F for 2nd class hardwood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (with sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc complete all as specified and as directed by the Engineer-in-Charge

S & F for PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening but wood grain printed PVC sheet & edges will be painted to match printed sheet, etc complete all as specified and as directed by the Engineer-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and as directed by the Engineer-in-Charge

S & F for 4.80mm thick sheet glass fixing for aluminium doors and windows ordinary quality and glazing with oil putty/ wooden beads in square n.exc 0.5 Sqm in each pane incl hacking out old glass panes complete all as specified and as directed by the Engineer-in-Charge

S & F for 4.80mm thick sheet glass fixing for aluminium doors and windows ordinary quality and glazing with oil putty/ wooden beads in square exc 0.5 Sqm in each pane incl hacking out old glass panes complete all as specified and as directed by the Engineer-in-Charge

S & F for 3mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beads in square n exc 0.5 Sqm in each pane incl hacking out old glass panes complete all as specified and as directed by the Engineer-in-Charge

S & F for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane incl hacking out old glass panes complete all as specified and as directed by the Engineer-in-Charge

Supply and fix stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 300mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed by the Engineer-in-Charge

S & F 100mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified and as directed by the Engineer-in-Charge

S & F in repair hydraulically Door closer Aluminium extruded body (Die (extruded regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed by the Engineer-in-Charge

Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engineer-in-Charge

Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge

S & F 1000ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing to store complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 10 litre capacity PVC valveless, syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle, flush pipe etc complete all as specified and as directed by the Engineer-in-Charge

S & F , in repair Vitreous china squating pan, Orissa Pattern, size 580 x 440 mm white with integral foot rests and PVC P or S trap (excluding flushing cistern and flushing pipe ) including connection to trap & flushing pipe etc complete including making good to floor complete all as specified and as directed by the Engineer-in-Charge

S & F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 110 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall and including brackets complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 75 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall and including brackets complete all as specified and as directed by the Engineer-in-Charge

S & F in repair PVC (SWR) reducer for 110 mm bore pipe complete all as specified and as directed by the Engineer-in-Charge

S & F in repair PVC (SWR) cowls 75 mm bore pipe complete all as specified and as directed by the Engineer-in-Charge

S & F in repair 110 mm PVC (SWR) WC connector with lip ring complete all as specified and as directed by the Engineer-in-Charge

S & F in repair PVC (SWR) S trap 110mm bore complete all as specified and as directed by the Engineer-in-Charge

S & F in repair PVC (SWR) junction single T equal or unequal 110mm complete complete all as specified and as directed by the Engineer-in-Charge

S & F in repair PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by the Engineer-in-Charge

S & F in repair plastic water closet seat conver, white/black, closed pattern with flats bottom and cover and mild steel chromium hinging device, of approved make and quality etc complete all as specified and as directed by the Engineer-in-Charge

Taking down carefully AC ceiling fan 1200mm/1400mm sweep, exhaust fan 300mm to 450mm sweep from their position complete for servicing such as removing dust and dirt from fan motor, washing blades with detergent powder including greasing to bearing, checking & replacing worn out screws with spring washers, rubber befit washers of fan blades, fan motor body, spilt pin/screw for fan down rod/check nuts as required for different makes of ceiling/exhaust fans to put fans fans to smooth and satisfactory working and refixing ceiling fan/exhaust fan after executing necessary servicing to their position connecting to electric system with suitable size of cable and testing, complete all as specified and as directed by the Engineer-in-Charge Note : Rates quoted by contractor shall deemed to be inclusive all minor items and no extra payment shall be admissible except for the items which are to be replaced which shall be measured and paid separately under respective item of Schedule 'A'.

Material & labour for preparation of old painted surfaces of ceiling fan, exhaust fan & wall mounting fan by scrubbing, cleaning with sand paper/wire brush etc making good surfaces and painting by applying synthetic enamelled first quality paint using spray gun in situ including filling cavities with filler and marking Srl No SM No / MES No with black paint, complete all as specified and as directed by the Engineer-in-Charge

Material and labour for rewinding of AC ceiling fan, 230 volts, 50 Hz, 1200mm sweep of any make with appropriate gauge super enamelled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc re-assembling at its position after repair, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge

Material and labour for rewinding of exhaust fan, 230 volts, 50 Hz, 450mm sweep of any make with appropriate gauge super enamelled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc re-assembling at its position after repair, testing and commissioning, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing ball bearing 6202/6203 in replacement suitable for AC ceiling fan of 1200/1400mm sweep/ exhaust fan/ air circulation fan of any make to replace the unserviceable bearing including greasing as required, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing in replacement capacitor, 4 mfd 230 volts, AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing in replacement capacitor, 2.5 mfd 230 volts, AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing in replacement fan canopy, complete all as specified and as directed by the Engineer-in-Charge

Taking down carefully Geyser of capacity 25/35 ltrs from its position for repair/servicing such as removal of dust, checking, replacing worn out parts, rubber etc, re-assembling at its position after repair, testing & commissioning & connecting to electric system with suitable size cable, complete all as specified and as directed by the Engineer-in-Charge Note : Rates quoted by contractor shall deemed to be inclusive all minor items and no extra payment shall be admissible except for the items which are to be replaced which shall be measured and paid separately under respective item of Schedule 'A'.

Supply & fixing galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., , fixed complete to walls and ceilings or laid in floors, complete including taking down complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., , fixed complete to walls and ceilings or laid in floors, complete including taking down complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing geyser tank of capacity 25 ltrs, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing geyser tank of capacity 35 ltrs, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing heating element for geyser, 1500 watt, round type, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing heating element for geyser, 2000 watt, round type, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing heating element for geyser, 1500 watt, triangle type, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing heating element for geyser, 2000 watt, triangle type, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing thermostat suitable for geyser of any capacity, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing Angle stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing Bib tap, 15mm bore, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing PVC connection 15mm dia, 900mm long with brass CP nuts and washers at both ends for hot water & Cold Water , fixed in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessores , 230 V,1200 mm sweep with BEE 5 star rated complete all as specified and as directed by the Engineer-in-Charge

Supply and fix Electric Water heater storage type steel body with copper inner tank and heating element up to 2KW capacity 25 litres, 220 V with BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV , connection pieces etc all as specified and directed by Engineer-in-Charge.

Taking down/out Deepfreezer/Refrigerator from 261 Transit Camp, transporting to contractor's workshop for carrying out repairs, taking out assembly, welding/brazing after detecting the leakage, as mentioned in respective items of Schedule including transporting back after repair, re-fixing at site, making it functional after replacement of worn out nuts, bolts, washer etc. including re-connecting electrical connection and testing, complete all as specified and as directed by the Engineer-in-Charge Note :- Cost of material and labour for providing new items shall be measured and paid for separately under relevant items of Sch 'A'.

Taking down/out Water Cooler of 40/80 ltrs and 60/120 ltr capacity from 261 Transit Camp, transporting to approved workshop for carrying out repairs, taking out assembly, welding/brazing after detecting the leakage, as mentioned in respective items of Schedule including transporting back after repair, refixing at site, making it functional after replacement of worn out nuts, bolts, washer etc. including re-connecting electrical connection testing complete all as specified and as directed by the Engineer-in-Charge Note :- Cost of material and labour for providing new items shall be measured and paid for separately under relevant items of Sch 'A'.

Material & labour for preparation of old painted surfaces by scrubbing, cleaning with sand paper/wire brush etc making good surfaces and repainting by applying two coats of synthetic enamelled first quality paint using spray gun over over one coat of red oxide zinc chrome primer and marking Srl No SM No / MES No with black paint of following items :- (a) Deep Freezer/Refrigerator/water cooler of capacity up to 320 Litres.

Supply and fixing in replacement of following unserviceable items of Deepfreezer/refrigerator of 300/310/320 litres as required at site including testing of the same, complete all as specified and directed by Engineer-in-Charge :- (a) MS condensing coil with fixing arrangement for 300/310/320 litres capacity complete with gas charging.

(b) Over load protector.

(c ) Thermostat switch (Auto defrost).

(d) Electrical lamp pin/threaded type 15 watt, 240 volts AC supply.

(e) PVC ice tray of superior quality.

Supply, fixing and testing new compressor, single phase, 240 Volts, AC supply in replacement including cost of rubber bushes, bolts, nuts washers, copper tubing capillary tube, dryer filter terminal cover, thimbles, electrical wiring oil and gas charging (R-134 or as recommended by manufacture) and testing complete for the following including transportion etc complete all as specified and directed by Engr-In-Charge :- (a) Compressor of Deepfreezer/Refrigerator of capacaity 300/310 Litres.

(b) Compressor of Water Cooler of capacaity 300/310 Litres.

Supply and fixing in replacement of following unserviceable items by opening of water cooler of 40/80 or 60/120 Ltrs capacity frost free for following replacement of unserviceable accessories and refixing, connecting and testing complete all as specified and directed by Engr-In-Charge :- (a) Copper Condensing coil complete with fixing arrangement.

(b) Fan motor 1/2 HP, 240 volts, single phase AC supply.

(c ) Aluminium Blade for fan motor complete blower.

(d) Thermostat.

(e) Relay.

(f) Over load protector.

(g) Float Valve brass 15 MM bore.

Supply and filling/charging of following water collers/Deepfreezer with refrigerant R-134 or as recommended by manufacturer including flushing out oil, vacuming, top up oil, brazing, leak detection, testing etc for following cooling appliances including replacement of capillary tube and dryer filter complete all as specified and directed by Engr-In-Charge :- (a) Water cooler 60/120 litres capacity. Note:-. The type of refrigerant gas shall be charged as per manufacturer recommendation.

(b) Deep Freezer/Refrigerator of capacity 320 Litres.

Taking down defective Split AC of 1.5 Ton capacity from any height and any places for repair and refixing at its original place after replacement of defective/wornout parts & making serviceable, complete all as specified & directed. Note:- Worn out spares parts required for making AC serviceable/functional shall be measured and paid separately under appropriate item as 'Supply only'.

(a) Supply only fan motor for 1.5 ton AC.

(b) Supply only AC compressor for 1.5 ton AC.

(c ) Supply only gas 22 R for 1.5 ton AC.

(d) Supply only AC copper pipe of size 8mm and 15 mm for 1.5 ton AC.

(e) Supply only 45 Mfd capacitor for 1.5 ton AC.

(f) Supply only contactor, single phase, 30 Amp for 1.5 ton AC.

(g) Supply only fan belt for 1.5 Ton AC.

Supply & fix Exhaust Fan , Steel body AC Single Phase 230V of size 450mm sweep with blades, frame and louvers with BEE 5 star rated all as specified and directed by Engineer-in-Charge.

Supply and fix in repair ventilating exhaust fan single phase, plastic body 200 mm sweep, complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener complete all as specified and directed by Engr-In-Charge. (Old retrieved fan shall be deposited to MES store yard)

Supply and fix in repair ventilating exhaust fan single phase, plastic body 250 mm sweep, complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener complete all as specified and directed by Engr-In-Charge. (Old retrieved fan shall be deposited to MES store yard)

Supply & fix in repair exhaust fans heavy duty 300 mm dia 1400 RPM, 50 Hz 230 volt for domestic use,dynamically balance blade , epoxy powder coated confirm to IS 2312-1967 with ISI marking IP-55 with class B insulation motor including suitable size louver and all fixing accessories such as fastners nut bolts and electric connection with 3 core cable c complete all as specified and directed by Engr-In-Charge. (Old retrieved fan shall be deposited to MES store yard)

S & F in repair Wall fan of single phase 230/240 V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed by Engr-In-Charge. (Old retrieved fan shall be deposited to MES store yard)

R C TRADERS (BID ID -3382292)