Repair/Replacement/Servicing of Summer Appliances and other allied works at Mil Stn Beas, 2 ASD and Jandiala Guru under GE Kapurthala.

Amount

Maintenance, servicing and testing of split type/window type AC, capacity upto 1.50/2 tons, any make, by cleaning cooling coil, condenser fins, blowing of dust from machines/air filters, checking and decarbonising all electric system oiling/greasing of blower motor, checking and removing any vibration and leakage in the equipment including checking/repair to inter locking device for winter/summer to ensure cutting off of compressor/heating in case of failure of blower motor including taking down and refixing in position, complete all as specified and directed by Engr-in-Charge. Note:- Cost of minor repair, replacement of petty items such as nuts, bolts, washers, screws, rubber mounting pads of compressor etc, transportation of equipment to workshop and back is deemed to be inclusive in the unit rates quoted by the contractor.

S&F in replacement, new compressor for split type/window type AC 1.5 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system, complete all as specified and directed by Engr-in-Charge. Note:- Compressor shall be tested to entire satisfaction of Engr-in-Charge and test results recorded and kept on charge.

S&F in replacement, new compressor hermetic/rotary for split type/ window type AC of 2.00 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system,complete all as specified and directed by Engr-in-Charge. Note:- Compressor shall be tested to entire satisfaction of Engr-in-Charge and test results recorded and kept on charge.

S&F in replacement starting relay suitable for window type AC of capacity up to 2 ton, complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement over load protection suitable for window type AC of capacity up to 2 ton, complete all as specified and directed by Engr-in-Charge.

S&F in replacement thermostat switch suitable for window type AC of capacity up to 2 ton, complete all as specified and directed by Engr-in-Charge.

S&F in replacement, blower motor 1/8 HP, double shaft, single phase suitable for window type AC up to 2 ton capacity including testing, complete all as specified and directed by Engr-in-Charge.

S&F in replacement, front grill for window type AC up to 2 ton capacity, complete all as specified and directed by Engr-in-Charge.

S&F in replacement, internal unit complete for split type AC 1.5 Ton capacity, comprising of blower motor, fan blade with rotor, evaporator with suitable filter, remote control system along with outer shell, complete all as specified and directed by Engr-in-Charge.

S&F in replacement; external unit including compressor for split type AC 1.5 Ton capacity, comprising of condenser oil, blower motor, blower fan, copper valve ½” & 5/8” with hot and cold arrangement including copper condensor coil complete all as specified and directed by Engr-in-Charge.

S&F in replacement; power circuit breaker (PCB) kit for split/window type AC for 2 ton, complete all as specified and directed by Engr-in-Charge.

M&L for trickle charging of gas F-22 or as required in AC, any capacity, after detection of leakage with soap solution/halide torch, making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contents trapped in the pipe line by charging CO2 gas and maintaining the pressure for prescribed period complete all as specified and directed by Engr-in-Charge.

S&F in replacement; blower motor 1/8 HP, single phase suitable for desert cooler including testing, complete all as specified and directed by Engr-in-Charge.

M&L for taking down existing unserviceable fan motor from desert cooler and including replacement of wornout winding, bushes and bearing etc refixing, connecting and testing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of water lifting submersible pump suitable for desert cooler as per existing capacity complete all as specified and directed by Engr-in-Charge.

S&F PVC pipe 15mm dia suitable for desert coolers including taking out unserviceable PVC pipe complete all as specified and directed by Engr-in-Charge.

S&F cooler pad made of Khas-Khas suitable for desert coolers including taking out unserviceable pads complete all as specified and directed by Engr-in-Charge.

S&F starting capacitor 40 MFD 230 Volts including taking out unserviceable capacitor, including testing complete all as specified and directed by Engr-in-Charge.

S&F in replacement Fan blade of desert cooler heavy duty HDPE suitable for 4000/5000 CFT cap complete all as specified and directed by Engr-in-Charge.

S&F in replacement copper conductor cable 40/0.0076 Sqmm 3 core not less than 3 mtrs long with plug top 5 Amp suitable for desert cooler complete all as specified and directed by Engr-in-Charge.

S&F in replacement new compressor for water cooler of capacity 40/80 Ltr, deep freezer capacity 200 to 300 Ltr including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed by Engr-in-Charge.

S&F in replacement new compressor for water cooler of capacity 60/120 Ltr, including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed by Engr-in-Charge.

S&F in replacement; blower motor 1/35 HP with base and clamp, rubber mountings for water coolers including taking out the old unserviceable motor, complete all as specified and directed by Engr-in-Charge.

M&L for rewinding of blower motor of water cooler 40/80 litres capacity any make with super enamelled copper wire including replacement of wornout bushes etc and testing complete all as specified and directed by Engr-in-Charge.

M&L for rewinding of blower of Deep freezer hard top 200 litres capacity having single door any make with super enamelled copper wire including of wornout bushes etc and testing complete all as specified and directed by Engr-in-Charge.

M&L for trickle charging of gas F-12 or as required in water cooler, any capacity, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/soldering the leakage point, flushing out the moisture contents trapped in the pipe line by charging CO2 gas and maintaining the pressure for prescribed period complete all as specified and directed by Engr-in-Charge.

S&F in replacement; push type water tap,15 mm dia, chromium plated suitable for water cooler, complete all as specified and directed by Engr-in-Charge.

S&F in replacement, thermostat switch suitable for water cooler, any capacity/make including taking down unserviceable thermostat switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement new compressor for refrigerator of capacity 286/310 Ltr including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified and directed by Engr-in-Charge.

M&L for trickle charging of gas F-12 or as required in refrigerator of capacity 286/310 Ltr, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contents trapped in the pipe line by charging CO2 gas and maintaining the pressure for prescribed period complete all as specified and directed by Engr-in-Charge.

S&F in replacement; thermostat switch for refrigerator of different capacity/make including taking out old unserviceable thermostat switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement; capillary tube made of copper, any size suitable for Refrigerator/Water Cooler including taking out old unserviceable capillary tube complete all as specified and directed by Engr-in-Charge.

S&F in replacement; capillary filter drier 2 way suitable for water cooler including taking out old unserviceable capillary filter complete all as specified and directed by Engr-in-Charge.

S&F in replacement tubular heating element 1500 Watt, complete all as specified and directed by Engr-in-Charge.

S&F in replacement; heating element 2000 Watt, complete all as specified and directed by Engr-in-Charge.

S&F in repair heating element for solar water heater capacity 3000 watt, complete all as specified and directed by Engr-in-Charge.

Taking out existing hot water pipe line and fixing the same after cleaning including refixing arrangement such as hooks, glass wool and aluminium cladding etc including required fitting complete all as specified and directed by Engr-in-Charge of the following sizes:- a) 20 mm dia,heavy grade.

b) 25mm dia,heavy grade.

S&F hot water pipe line (heavy grade) duly insulated with glass wool and aluminium cladding complete all as specified and directed by Engr-in-Charge of the following sizes:- a) 20 mm dia, heavy grade.

b) 25mm dia, heavy grade.

S&F in replacement thermostat for Geyser of capacity 50 Ltr/25 Ltr, complete all as specified and directed by Engr-in-Charge.

S&F in replacement safety valve for any capacity of Geyser, complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement;15mm outer dia PVC connection for hot and cold water pipe 450mm long, with adaptors of brass jem nuts and rubber washers, both side complete all as specified and directed by Engr-in-Charge.

Supply, Install, Test and Commissioning of Voltage Stabilizer having following features i .e. high power efficiency intelligant time delay system (3 mnts + /- 20 sec ITDS ) inrush current capacity etc for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 270 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 2.0 KVA compete Model No VG 400 of v- Guard or equivalent in blue star /vertex

Supply, Install, Test and Commissioning of Voltage Stabilizer having following features i .e. high power efficiency intelligant time delay system (3 mnts + /- 20 sec ITDS ) inrush current capacity etc for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 270 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 5.0 KVA compete Model No VG 400 of v- Guard or equivalent in blue star /vertex

SUNRISE ENGINEERS AND CONTRACTOR (BID ID -3087916)