EE(Elect.)/CNZ/2020-21/35-01

Amount

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Up to 35 sqmm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existingRCC /HUME/METAL pipe as required. Up to 35 sqmm

Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required .(a) 3x2.5 sqmm

S/L of following size DWC HDPE Pipe ISI marked along with all accessories like socket ,bend ,couplers etc.conforming to IS 14930 ,part II complete with fitting and cutting ,jointing etc .direct in ground (75 cm below ground level )including excavation and refilling the trench but excluding sand cushioning and protective covering etc, complete as required (a)63mm dia (OD-63mm ID -51mm nominal ).

Supply of XLPE insulated and PVC sheathed Al. Conductor Armored cable 1.1 KV grade conforming to IS 7098 of 2x10 sqmm as reqd.

Fabrication,supply & errection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full vertical window cover at appropriate hight from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 4 mm thick of suitable length and having suitable size tapped holes as reqd., terminal block suitable for 25 sqmm conductor-4 nos & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable lenth,6 amps SP MCB "c" characteristics,earth stud,cable support clamp suitable for upto 4x25 sqmm cable. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.( a) 7.o mtr. hight,3 mm thick,bottom dia of 130 mm & top dia of 70 mm, base plate of size 225 mm x 225 mm x 12 mm thick.

Providing and laying in position M25 grade reinfoced cement concrete foundation of size600 mm(L)x600mm wide and 1200 deep i/c excavation of earh, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm dia- 1160 mm long (approx)-8 nos and reinforcement of cold twister bar of 8 mm dia1600mm (approx) - 8 nos (with150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts of size 20mm dia, 750 mm long, J type i/c 2 nos. template anchor plates of size 225x225x3mm and providing DCW HDPE pipe for cable entry & exit as required for 7 mtr and 8mtr pole.

Fabrication, supplying & fixing class B Galvanised Double overhang arm bracket made out of 250 mm long galvanized top tube with cap and 1000 mm long 40 mm dia galvanized pipe with tightening bolts complete as reqd.

M/s HI TECH ELECTRICALS