8228 SPECIAL REPAIR TO BLDG NO P-153 AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removimng rubbish off the premises complete all directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc and removing from site complete all as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding and removing u/s tiles and rubbish off the premises complete all as directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete including removing rubbish off the premises all as directed

Dismantling of boarding, any description fixed in any position with nails i.e. in false ceiling and wall lining etc and similar position including removing from site complete all as directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each including removing from site complete all as directed.

All as per item No 6 here-in-before but exc 1.5 sqm and n exc 4.0 sqm each.

Taking down chowkats or frames only n.exc 1.5 sqm and removing from site complete all as directed.

All as per item No 8 here-in-before but exec 1.5 sqm and n exc 4.0 sqm each.

Taking down shutters of any description area exc 1.0 sqm but n exc 2.0 sqm complete and removing from site complete.

Taking down shutters with frame of exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after necessary resecuring / adjusting / repair etc as directed by Engineer-in-charge including making good the disturbed jambs with PCC type B0 1:2:4 using 12.5mm graded aggregates complete.

All as per item No 11 here-in-before but exc 2.0 sqm each.

Taking down shutters of exc 2 Sqm and refixing in the same opening complete all as directed.

Resucuring or easing and adjusting without taking down shutters of door / windows / cupboard n.exc 1 Sqm complete as specified and directed

All as per item No 14 here-in-before but exc 1.0 sqm and n exc 2.0 sqm each.

Easing / petty repair of aluminium door / wooden door / PVC door / steel windows / ventilator by adjusting hinges by hammering oiling / greasing / welding to hinges, adjusting handle of peg stay and making the shutter fully functional including supply of small hardwares etc complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty complete all as directed and removing from site.

Dismantling water tanks capacity exc 250 Litre and n.exc 500 Ltrs and removing from site complete all as directed.

All as per item No 18 here-in-before but exe 500 litre and n exe 1000 litre capacity.

M&L providing cement concrete (1:2:4) B-1 using 20 mm stone aggregate as in chajjas, roof fascias and like complete all as specified including making necessary grooves complete all as specified and directed.

M&L P:C:C 1:5:10 type E2 using 40 mm graded agregate as in mass concrete as in sunken portion including providing necessary slope / camber as directed and duct for drain of water complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde C-5 and setting in CM 1:6 complete all as specified and directed.

M&L for precast cement concrete block masonry not exceeding 10 cm in width with solid blocks of PCC (1:5:8) gde C-4 and setting in CM 1:4 complete all as specified and directed.

M&L for cuting hole in brick wall built in cement mortar for inserting or taking out holdfasts or like and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick thick wall all as specified and directed.

Ditto but n.exc half brick thick wall.

M&L for applying layers of Dr Fixit Pidifin 2K to vertical / horizontal plastered surfaces of sunken portion as per manufacturers instructions complete as directed complete Note : Ponding test to be carried out after application and leakage seepage if any to be rectified by Pidifin 2K layer before filling PCC 1:5:10

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, slab, beams, lintels etc, removing all loose rust/scale form exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied with reinforcement bars/ IRC fabric 50mm X 50 mm X 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land all as specified and as directed.

M& L for epoxy grouting 75 mm thick for crack filling, voids, and joints in concrete structures by providing deep penetration, shrink free solid mass, strong bonding inside the cracks and excellent resistance to honey combing and chemicals including necessary formwork or any scafolding etc required for the process complete all as specified and directed.

S & F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panells commercial type on both faces incl 6mm thick Ist class HW (Teakwood) beading all around on edges complete all specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20 mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5 mm x 2 mm) thick, 20 mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg and specified.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guage complete all as shown in drg and specified.

S&F stainless steel butt hinges 100mm, medium weight complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles ,fabricated type complete all as specified and directed.

S&F in repair mortice lock vertical type 100mm brass four lever complete all as specified and directed.

S&F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S & F in repair curtain rails stainless steel 25mm dia with SS brakcet, knobs, rings @ 10cm c/c etc complete all as specified and directed.

S&F in repair MS butt hinges medium weight 100mm long fixed to pressed steel / angle iron frames by welding or with screws to the wooden / PVC shutters / frames complete all as specified and directed.

S&F in repairs Mild Steel barrel tower bolt 200mm long stove enameled black, with bright bolt complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section and complete all as specified and directed.

S&F in repairs aluminum handle cast type anodized 150mm long fixed to PVC / panelled / skeleton / cupboard shutters complete all as specified and directed.

S&F in repair 250mm long aluminium anodised sliding door bolt with hasp, staple, (bolt type) and fixed clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and complete all as specified and directed.

Supply and fixed in repair MS window hinges any type for steel window in lieu of broken projected type hinges or any type by welding of suitable size at site complete all as specified and directed.

S & F in repair MS window handle 125mm with nut or bolt to steel windows fixed at any height complete all as specified and directed.

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc (a) SP - 20048 (b) Glazing clips - 19352. complete all as specified and directed by Engineer-in-Charge.

S & F pressed steel frames of size 105 x 60 mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc including filling with PCC (1:3:6) type C0 complete as specified and directed.

S&F MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank, and similar work confirmed to Fe-290, Gde-E-165 complete including intricate / ornamental design as directed by Engineer-in-charge complete

M&L for 25mm thick roof padding in cement concrete type B-0 1:2:4 using 12.5mm graded aggregate inclusive of mixing of liquid water proofing compound Dr Fixit LW+ or equivalent as per manufacturers instructions, finishing cement concrete surface even and smooth using extra cement and forming slope as required on ground and as directed by engineer-in-charge complete. Note: Liquid WPC shall be measured and paid separately.

Supply only liquid proofing waterproofing compound.

M&L for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish on and including anodised aluminium snap grid framed work incl hangers 6mm dia G.I (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long complete all as specified and directed.

M&L for decorative POP cornices/moulding of pattern of cross section area exc 13 Sqcm and n.exc 25 Sqcm complete all as specified and directed..

M & L for water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and as directed by Engr-in-charge(a) M & L for 10 mm thick screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminous primer @ 0.40 litres per Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.5 Kg/Sqm and 4 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge, Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces including removing old bituminous tarfelt complete all as specified and as directed by Engr-in-charge.

M & L for PCC 100 mm thick (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M & L for 50mm thick cement concrete (1:3:6) type C – 1 using 20mm graded stone aggregate as in plinth protection etc all as specified and directed.

M&L for 75mm thick levelling course in cement concrete type B-2 1:2:4 using 40mm graded aggregate complete all as specified and directed.

M&L for 50 mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and directed.

M&L for 25mm thick levelling course in cement concrete type B-0 1:2:4 using 12.5 mm graded aggregate complete all as specified and directed

M&L for 20 to 25mm thick machine cut Kota stone flooring over and including 15 mm thick cement screed bed in cm (1:6) laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No 62 here-in-before but kota stone slab in riser of steps, skirting , dados and pillars polished laid over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in cement mortar 1:6 complete all all as specified and directed.

All as per item No 64 here-in-before but exc 0.18 sqm and in exc 0.38 sqm.

M&L for coloured designer glazed ceramic tiles of size 300x600x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:4 as in floor / skirting / risers or as in vertical support with edges polished / rounded or counter top for wash basin as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position and ensure best adhesion to surface complete all as specified and directed.

M&L for polishing of existing kota stone floor and skirting upto satisfaction of Engineer-in-Charge complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over brick / conc surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and directed.

All as per item No 69 here-in-before but in CM 1:4 for external wall surfaces in two layers, 5 mm thick shall be laid over 10 mm thick rendering and top layer shall be mixed with liquid wpc as per manufacturers instruction complete all as specified and directed. Note: Liquid WPC shall be measured all paid separately.

All as per item No 69 here-in-before but 10 mm thick in cm (1:3) as in ceiling.

M & L for 15 mm i.e. 10mm before application of Pidifin 2K or equivalent layer as per manufacturers instructions and 5mm thick over it rendering in cement mortar 1:3 on horizontal and vertical faces of sunken portion mixed with WPC liquid type complete all as specified and directed. Note : Application of Dr Fixit Pidifin 2K or equivalent chemical layer will be measured and paid for under item No 26 here-in-before.

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified

M & L for preparation of newly plastered surface of wall and applying two coats of OBD over a coat of 3mm thick wall care putty complete all as specified and directed

M & L for complete removal of existing treatment on wall and applying two coats of OBD over a coat of 3 mm thick wall care putty on wall complete all as specified and directed

M & L for preparation of newly plastered surface of seamless false ceiling and applying two coats of OBD of approved tint over a coat of 3mm thick wall care putty complete all as specified and directed

M&L for preparation of old plastered surfaces of wall and applying two coat, of white wash complete all as specified

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified

M&L for complete removal of existing treatment from old walls by mannual / mechanical means, and applying two coats of acrylic emulsion (weather coat) over a coat of primer of the same make over a coat of 3mm thick exterior grade wall putty complete all as specified and directed. Note: (i) Exterior emulsion paint shall be carried out by authorised applicator of the company. (ii) Exterior emulsion paint shall be 1st quality antifungal proof dust resistance, water repellent, crack bridging and weather proof. (iii) The contractor shall furnish 5 years guaranttee against the efficiency of the work for the above item on a non judicial stamp paper of appropriate value.

M&L preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over a coat of pink primer, over 10cm width or girth complete all as specified and directed.

M&L for preparation of new untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and directed.

M&L for preparation of old steel or iron surfaces of any description and applying one coat of synthetic enamel paint over 10 cm width or girth complete all as specified and directed.

S&F, 3 mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane complete all as specified and directed.

S&F, 4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S & F steel tubing, galvanised, 15 mm bore, medium grade , with all fittings laid in floors or fixed to walls or ceilings including taking down old u/s GI tubing complete all as specified and directed.

All as per item No 88 here-in-before but 20 mm bore tubing.

Disconnecting existing PVC tanks upto 2000 lit capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 500 litres capacity, double layered hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions and providing 20 mm bore ball brass valve complete all as specified and directed.

All as per item No 91 here-in-before but 1000 litres capacity tank.

S&F in repair 20mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F, 110 mm dia PVC rain water pipe single socketed with rubber ring joint, fixed to wall complete including taking down old u/s pipe all as specified & directed

S&F 110mm dia PVC bend any radius complete all as specified and directed.

S&F in repairs 15mm chromium plated cast copper alloy bib taps complete all as specified and directed.

S & F in repairs 15mm bore chromium plated, fancy type stop valve, cast copper alloy screwed down, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed

All as per item No 97 here-in-before but long shank (concealed type).

Supply & fix in repairs CP Pillar Cock with Aerator as per Cat No G3102A1 of Make - Parryware or equivalent model of specified make given in PS compete all as specified and directed.

S&F in repair brass chromium plated Single Flow Overhead Shower with Arm as per Cat No : T9901A1 ` Make : Parryware or equivalent model of specified make given in PS complete as specified and directed.

Supply & fix in repairs CP Basin Mixer without Pop up as per Cat No G3114A1 of Make - Parryware or equivalent model of specified make given in PS complete as specified and directed.

S & F in repair Single Lever Wall Mixer as per Cat Part No G0618A1 of Make : Parryware or equivalent model of specified make given in PS complete as specified and directed.

S & F in repair soap dish as per Cat No T6403A1 of Make - Parryware equivalent model of specified make given in PS complete as specified and directed.

Supply & Fix in repairs Cardiff Health Faucet with hose & hook as per Cat No T9941A1of Make - Parryware or equivalent model of specified make given in PS complete as specified and directed.

S&F in repairs Orissa pattern water closet as per Cat Part No C0117 500 mm of Make Parryware or equivalent model of specified make given in PS with P/S trap etc complete all as specified and directed.

S&F in repair vitreous China EWC White (Popular) as per Cat No - C0252 Niagara Make - Parryware with seat cover and Jet spray including fixing bolts and supply and fixing of 10 litres capacity flushing cistern 15 mm bore chromium plated angle cock and PVC connection pipe 15 mm dia 450 mm long making connections to flushing cistern complete all as specified and directed.

S&F in repairs vitreous china White Wall Hung Closet with Cisterna as per Cat Part Nos C0210 Wall Hung Closet, C0757 Cistern, C2067 Lid, Seat Cover, C8020 Fittings Make - Parryware or equivalent model of specified make given in PS including P/S trap if required complete all as specified and directed.

S&F in repairs vitreous china white counter top basins (Self-Rimming) as per Cat Part No C8417 Counter Top (560 x 455 mm), Full Thread Waste Coupling Cat part No T9911A1 Make - Parryware or equivalent model of specified make given in PS including waste pipe complete all as specified and directed.

S&F in repair vitreous china flat back wash basin, white of size 550 x 400 mm including brackets, chromium plated waste coupling and waste pipe complete all as specified and directed.

S&F in repair jet spray for EWC seat with accessories as per Cat Part No C8144 Make : Parryware or equivalent model of specified make complete all as specified and directed.

S & F in repair syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified and directed.

S&F in repair chromium plated fancy type angle cock 15mm bore complete all as specified and directed.

S&F in repair PVC connection pipe 15 mm dia and 600 mm long complete all as specified and directed.

S&F, 100mm bore sand cast Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors including taking down old one complete all as specified and as directed.

All as per item No 115 here-in-before but 75 mm bore.

Supply and fix stack clamps made out of 50mm x 5MM Flat iron and 16 mm round iron stay incl bolts and nuts and securing ends stays to wall or roof includding taking down the existing clamps for rain water pipe or CI pipe 100mm bore at any height complete all as specified and directed.

All as per item No 117 above but for 75mm bore pipe.

S&F, 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S&F, 75mm bore CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S&F, 100 mm bore CI Bends (any radius) with duck’s foot or heel rest fitted with oval access door complete all as specified and directed.

S&F, 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F, in repairs CI Nahani trap 75mm bore with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F, SGSW gully trap square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs cast iron cowl 100 mm bore dia as required complete all as specified and directed.

S&F in repair grating round 125mm dia with or without hole CP brass chromium plated complete all as specified and directed.

S&F PVC waste pipe 32 mm dia of standard length suitable for WHB or for sink as required at site complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as directed.

Taking down the existing unserviceable main switch / DBs of any type / capacity / description as existing at site including MCBs of any type and capacity including removal of u/s material from site and making good the disturbed surfaces to match with the existing finishes all as specified directed.

Taking down the existing unserviceable sub main wiring of any type / description including making good the disturbed surfaces to match with the existing finishes and removal of u/s material from site completed all as directed.

Taking down ceiling fan/ exhaust fan/ wall fans of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed.Painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as directed.

M&L point wiring complete with and including single core FRLS PVC insulated un- sheathed flexible bright annealed multi stranded copper conductor cables 1.5 sqmm (22/0.30mm ) 1100 Volts grade drawn through and including heavy duty PVC rigid conduits of suitable size totally concealed in walls /floors etc with all conduit accessories/fittings/junction boxes/inspection covers etc. of heavy grade, ISI marked and modular type sunken boxes factory made with modular cover and frame complete including 1.5 sqmm 1100 V grade FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/fans etc. at one end to common earth dolly at other end, complete all as specified. Note-Cost of cutting in chases and making good of disturbed surface shall be included in the above quoted rate and no extra cost shall be paid for the same.

(a) One light point controlled by one, one way switch all as specified.

(b) One ceiling fan/ wall fan/ Exhaust fan point controlled by one, one way switch and regulator all as specified.

(c) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board all as specified.

(d) One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board all as specified.

(e) One light point controlled by two 2-way switches complete all as specified.

All as per Item No 132 here-in-before above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F modular switch 6A SP one - way 230V white ivory finish complete all as specified and directed.

S & F modular switch 6A SP two - way 230V white ivory finish complete all as specified and directed.

S & F modular switch 16A SP one - way 230V white ivory finish complete all as specified and directed.

S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S & F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S & F for ceiling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and directed.

S & F stepped type modular fan regulator electronic type for ceiling fan two module with white ivory finish complete all as specified and directed.

S & F Single pole and neutral metal clad sheet enclosure with a two pin and earth plug and socket complete with including one single pole MCB 20 amp all as specified and directed.

S&F DB TPN 4 way double door, recessed mounted/ wall mounted,all as specified and directed.

S & F MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall making good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.

S & F MCB four pole of rated capacity 63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified and directed.

S & F for MCB double pole of rated capacity 32/40 amps, 230 volts breaking capacity 10 KA, C-curve complete all as specified and directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified and directed.

M & L for Sub main wiring complete with 2 single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping and accessories complete all as specified. Note:- Making good of disturbed surfaces will be done by contractor without any claims. (Note :- 3 runs of 2.5 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with 2 single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping incl accessories complete all as specified. (Note :- 3 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with 4 single core 4 sqmm and one core of 4 sq.mm earth wire,1100volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including PVC surface conduits including reqd. accessaries complete. (Note:- 5 runs of 4 Sqmm conductor and one run of PVC Conduits shall be measured as one unit length.)

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all specified and directed.

S & F LED bulb of 12W cap 2 pin type. Make - Wipro or equivalent make as specified in PS.

Supply and fix in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector. Make :- Bajaj/Havells/Philips/wipro.

S&F in replacement of LED mirror light fitting 10 watt complete in all respect having high luminaire, integrated LED channel with white acrylic cover of 10W cap as per Cat Part No BCLSB10WH of Bajaj or equivalent Havels/philips/wipro.

S & F in replacement of round recessed mounted 15 watt LED downlighter with aluminum die cast body, finshed with drop down PC diffuser to deliver low glare illumination with optimize heat sink for efficient heat dissipation complete all as specified and directed Make - Cat part No. BGSLO SLEEK 15W WH RD of Bajaj or equivalent in Havell's/Philips/Wipro.

S & F in replacement of LED light fittings 2'x2', 28 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements, complete all as specified. Make :- HAVELLS Cat part No. PLUTONEO2X2PLR28WLED840S (HSN 9405) 28 W equivalent in Philips/Wipro/Bajaj.

S&F LED security light in replacement of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired all as specified and directed make Philips/Havells/Wipro/Bajaj.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed.

Suma Construction

TRINITY ENGINEERS

KSP ENTERPRISES

SARATH ENTERPRISES

ELIEYAS TRADERS

Mourya Construction