Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.5 L+₹4.5 L (14.1%)Rejected-Finance | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹37.0 L+₹5.0 L (15.7%)Rejected-Finance HOUSE NO 6 18 WARD NO 05 HOUSING BOARD COLONY HANUMANGARH JN 335512 RAJ | HANUMANGARH | RAJASTHAN | 335512 | L3 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹81,700
Closing Date
15 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
SPL REPAIR TO BLDG NO P-422 AND CERTAIN LBW AT MIL STN SRI GANGANAGAR
2023_MES_623949_1
GE SGNR/TOK-51 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and for un-enlisted, refer NIT para 8
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹81,700
Yes
18 Dec 2023
18 Oct 2023
17 Nov 2023
18 Oct 2023
15 Nov 2023
1 Nov 2023
Amount
Dismantling of Brick tiles or terracing tiles , single layer on roofs complete all as specified and directed by Engineer-in-Charge.
Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plaster complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B2(20 mm graded aggregate) as in roof padding/kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.
Providing and applying APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (wt n.less than 150gm/sqm) land on primed surface by forced application keep overlap margin for minimum 100mm heat both the overlaps and use round tipped trowel to seal overlap excess compound shold be smoothened and pressed into seam using hot trowel including and Applying evenly a tack coat of bitumen primer @0.50 ltrs/sqm on prepared and allow to dry. Industrial bitumen 85/25 at the rate of 1.2 Kg per sq.m. including cleaning surfaces with wire brush / coir brush to freee from all loose materials like dust, dirt ect and make wattah / coving of 75x75 mm with PCC 1:2:4 type B1 at all horizontal and vertical joints to avoid right angle turning, complete all as specified and directed by Engineer-in-Charge.
S&F for Heat Resistant Terrace tiles (300mm X 300mm X 20mm) with SRI (solar refractive index) more than 78 on waterproof and sloped surface of terrace laid on 15mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed by Engineer-in-Charge.
Dismantling water tank capacity exc 250 Ltr and n exc 1000 ltr complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polyethylene water storage tank White Colour 500 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position and including 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engineer-in-Charge.
S&F rotational moulded polyethylene water storage tank White Colour 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position and including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer-in-Charge.
Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No. 10 here in before but fixing with new fittings only complete all as specified and directed by Engineer-in-Charge.
Taking up or down for 25mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No. 13.0 here in before but fixing with new fittings only complete all as specified and directed by Engineer-in-Charge.
Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer-in-Charge.
M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer-in-Charge.
S&F 110mm bore PVC (SWR) bends any radiuscomplete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge.
M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note :- WPC rate included in this item. No extra cost shall be paid.
M & L for applying two coat of Premium Acrylic Smooth exterior paint (Apex) on external new surfaces of wall including one coat of wall care putty as per manufacturers instruction complete all as per direction of Engineer in charge. Work will be carried out by mechanical means.
Demolition of RCC as in Roofs, floors ( other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer-in-Charge.
S & F for 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S & F for 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
M&L for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of cruide oil by weight of cementcomplete all as specified and directed by Engineer-in-Charge.
M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L two coat of Acrylic emulsion on newly pastered wall surfaces over one coat of wall care putty including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing treatment on wall surfaces (internal and external wall surfaces) complete all as specified and directed by Engineer-in-Charge.
M & L for one coat of wall care putty 3mm thick (in two layers) on old plastered/decorated wall and ceiling surfaces (internal and external wall surfaces) complete all as specified and directed by Engineer-in-Charge.
M & L two coat of Acrylic emulsion on old decorated plastered wall surfaces complete all as specified and directed by Engineer - in - Charge
Demolition of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.
S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer-in-Charge.
S&F Aluminum Grill of approved design/pattern with aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engineer-in-Charge.
S & F of Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer-in-Charge.
S & F of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer-in-Charge.
S&F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer-in-Charge.
S & F aluminium handles cast type anodised, 150mm long complete all as specified and directed by Engineer-in-Charge.
S& F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified and directed by Engineer-in-Charge.
Taking down carefully and refixing of sub class 'B' brick tiles 40mm thick laid over on including 15mm thick screed bedin CM (1:4) and jointing and pointing in CM 1:4 by mixing linseed oil @ 5% weight of cement and bedding layer using 100% coarse sand complete all as specified and directed by Engineer-in-Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
AYUSH BUILDERS
R B Infrabuilders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .