Modification to the adjoining room of the Chief Secretarys office

Supply of Godrej Interio Stylo office desk of size 1.20x0.6 m with SIAM teak laminate

Glazed Partition up to 1.80 m high - with 2" X 1 ½ aluminum pipe framing fitting with both side 6mm thick marine plywood fitting with both side 4mm thick teak veneer finish with teak wood moulding fitting with partition top 1" x 2 ½ teak wood moulding fitting with hand polish finish.

Providing and fixing translucent film 0.40 m high above the office desk for the glass partition per the direction of Engineer - in charge.

Providing and fixing of 75mm thick teak wood door shutter of size 0.90m X 2.40m similar to existing door in the chamber with red sal wood shutter frame of 60X35mm with fixing of 15mm marine ply at both side with both side 4mm thick teak veneer at top including melamine polish finish.

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.;40 x 3 mm flat iron hold fast 40 cm long

Providing & Fixing of New Mortice lock Knob type without lock

Providing and fixing of rustic look tower bolt (barrel type) with necessary screws etc. complete

Providing and fixing bright finished brass flush bolts with necessary screws etc complete;250 mm

Providing and fixing of rustic look brass handle with necessary screws etc. complete size

Providing & Fixing of New concealed door closer to doors, HETTICH make

Providing and fixing of door floor spring of make Everest, Universal or equivelent with necessary screws and fittings etc. compelete

Providing & Fixing of New brass aldrop to doors

Providing and supplying wall clock of Seiko/Rythym or equivalent brand as per choice of Architect and direction of Engineer in-charge.

Providing & Fixing Large Canvas wall Painting with decorative frame as per Architectural drawing & instruction of Engineer incharge.

SS DUSTBINS make : Labserve India / Equivalent S.S. Paddle Dustbin M.O.C. S.S. 304 qlty* 16/18 swg Finish : Matt Finish Size : Dia 300*375mmht

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

An elastomeric cementitious waterproof coating for concrete and masonry.;Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding ladders supporting materials etc. complete. Rates shall be inclusive of all labour materials tools and plant etc. complete.

Providing and polishing melamine polish matt finish of existing shade including scrapping of existing polish filling of cracks and holes rubbing etc (f)semi circular curved table-4"x2"

Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet spaced 1200mm center to center and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings fixture smoke detectors etc. wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners level clips of size 85x30x0.8mm spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint for all heights as per specifications drawings etc. complete. (As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laboratories, Library, Canteen.