Construction of Academic Block (Phase-II and III) of the New College Building for Ramanujan College at Kalkaji, New Delhi

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Total of (BoQ 3, BoQ 4, BoQ 5) - BoQ 6

Total Amount of BoQ3 (Item Rate)

Total Amount of BoQ4 (Percentage Rate)

Total Amount of BoQ5 (Percentage Rate)

Total Amount of BoQ6 (Item Rate) Credit Item (-)

Description of Work / Item(s)

Amount

NON SCHEDULE ITEMS/(MARKET RATE ITEMS) CIVIL

NS 1- Providing and fixing 6 mm thk tinted toughened glass in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. all complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :

Fabricaion of Structural Frame Work (i) Cutting of components to required lengths / widths and shapes / profiles, (ii) Smooth grinding / machining of edges / faces / all welding joints. (iii) Preparing the Surface to ensure complete removal of mill scale by grit & sand blasting to achieve finish. (iv) Necessary welding (electric arc welding ) for required weld lengths and sizes. (v) Allow for Surface preparation, derusting primer coat, three or more coats of synthetic enamel paint etc. complet all as directed by the Architect. Note: The contractor shall submit fabrication drawings for work involved based on construction drawings (that may be issued during construction period ) for approval by the Architect. The fabrication work shall start only after approval of the fabrication drawings. Any change required in the fabrication drawings shall be carried out at no extra cost. Fabrication shall be in a perfect Architectural workmanship manner.

NS 3- Providing and fixing Stainless Steel (S.S) tower bolts, ISI marked,with required colour or shade, with necessary screws etc. all complete. 450 x 12 mm

NS 4- Providing and fixing approved galvanized chicken wire mesh ( 24 guage 18 mm size ) to junction of Brick wall & RCC with necessary nail clip etc all complete.

NS 5 - Providing and fixing S.S. Handles Dorset and equivalent. with necessary screws etc. all complete.

NS 5 (a) - Class Room door Handles 300x16mm

NS 5 (b) - Class Room door Handles 250x16mm

NS 6 - Providing and fixing Hilti make HRD CR2 10X140mm fasteners complete with all fittings and fixtures.

NS 7 - Providing and Fixing of Stainless Steel( Grade 304) 50 mm dia hollow tube along the staicase dado wall including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc. all complete, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per the architectural drawings and the directions of engineer-in-charge .

NS 8 - Providing and fixing Hard Wood Beading of approved shape and size 60x30mm above tile cladding in corridors with counter sunk S.S. Screws Powder Coated Flat Head Pre Painted with Rawl Plugd all complete .

NS 9- Providing and fixing stainless steel (S.S) sliding door bolts, ISI marked with required colour or shade, with nuts and screws etc. all complete : 450x16mm

NS 10 - Providing and fixing stainless steel (S.S) sliding door bolts, ISI marked with required colour or shade, with nuts and screws etc. all complete: 300x16mm

NS 11- Providing and fixing Second Class Teak wood work in Architrave of size 50x15mm on doors and fixed in position With S.S Screws all complete .

NS 12 - Providing and fixing 30mm dia 400mm long PVC pipe sleeve with end cap for dowel bars in road panels for expansion joints for 20mm dia MS round bars complete in all aspects.

NS 13 - Extra for finishing M-30 Concrete in Road with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc all complete. complete as per specifications and directions of Engineer-incharge

NS 14 - Toilet Cubicle Thickness of Compact Laminate : 12mm Size of Partitions : As per drawing Accessories Details : Standard – Stainless Steel a) Adjustable foot. b) U -Channel c) Gravity hinges (Right /Left) d) Coat Hook with door Stopper e) Door Knob f) Lockset with indicator. g) Aluminium Anodised Top Rail h) Screws & Wall Plugs i) Noise Deafening tapes for grooves in doors. Overall height : 1995mm(Including 150mm Ground Clearence) Toilet Cubicle L-Shape (Front Partition) with standard dimension of manufacturers which includes 600mm door size width).

NS 15 - Providing and placing in position white colour ROOF ENVELOPE - roof insulation blocks on terrace of size 310mm X 240mm X 55mm . Density of blocks should be 715 +/- 50 KGS/CUM ,having K-Value < 0.10 W/M °K & S.R.I 86% [+] and placing as per direction of the manufacturer and Engineer-in-charge complete in all respect

NS 16- Supplying, fabricating, assembling, hoisting / erecting and fixing in position 4 mm thick Aluminium Composite Panel sheet on outside of AC shafts including providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work to support the panel (as/drawing) with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with4 inch dash fasteners to surrounding brick work. The ACP sheet will be fixed with S.S Screws powder coated/head pre painted of matching shade to the aluminium sub frame complete in all respect.

NS 17- Mirror Polishing of stone flooring and skirting (over and above the stone polishing executed as part of DSR Item ) inclusive of labour,material and machines etc complete in all respects.

NSR - PL & FF Works

NS 18 - Providing and fixing C.I. medium duty Manhole Cover with frame size 600x600mm total weight 38 kg. complete in all respects. (For Grease Trap)

NS 19 - Providing and fixing soil waste and vent pipes 150mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989 including cost of painting.

NS 20 - Providing and fixing soil waste and vent pipes 150 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 including cost of painting.

NS 21 - Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron centrifugally cast (spun) iron S&S pipes embedded in and including cement concrete blocks 10x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls, etc. For 150mm diametre

NS 22 - Providing and fixing plain bend of required degree: 150mm centrifugally cast (spun) iron S&S as per IS:3989.

NS 23 - Providing and fixing plain bend of required degree: 150mm Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

NS 24 - Providing and fixing heel rest sanitary bend 150mm centrifugally cast (spun) iron S&S as per IS:3989.

NS 25 - Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete 150 x 150 x 150mm centrifugally cast (spun) iron S&S

NS 26 - Providing and fixing single equal plain junction of required degree : 150x150x150 mm Sand cast iron S&S as per IS - 3989

NS 27 - Providing and fixing single unequal plain junction of required degree : 150 x 150 x 100mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

NS 28 - Providing and fixing single unequal plain junction of required degree : 150 x 150 x 100mm Sand cast iron S&S as per IS - 3989

NS 29 - Providing and fixing door pieces insertion rubber washer 3mm thick, bolts and nuts complete 150mm centrifugally cast iron S&S as per IS: 3989.

NS 30 - Providing and fixing terminal guard 150mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

NS 31 - Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 150mm SS 304 grade coupling with EPDM rubber gasket

NS 32 - Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipe of diameter: 150mm

NS 33 - Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate, grey or buff, etc., over a coat of primer (of approved quality) for new work. 150mm diametre pipe

NS 34 - Providing, fixing, testing & commissioning of Drip Seal (Density 1.95 gm/cc) joints to .C.I. pipes and specials including cost of drip seal, yarn and tools etc of approved make (as per approval of engineer-in-charge). The drip seal shall be in two pack system which hardnes on mixing. Drip shall have setting time of 4 to 6 hours and shall able to stand pressure of 20 kg/cm2 afrer hardeing. Drip seal shall be provided in quantity as indicated against each dia meter of pipe below. 100 mm ( 200 to 250 gm/joint)

NS 35 - Providing, fixing, testing & commissioning of Drip Seal (Density 1.95 gm/cc) joints to .C.I. pipes and specials including cost of drip seal, yarn and tools etc of approved make (as per approval of engineer-in-charge). The drip seal shall be in two pack system which hardnes on mixing. Drip shall have setting time of 4 to 6 hours and shall able to stand pressure of 20 kg/cm2 afrer hardeing. Drip seal shall be provided in quantity as indicated against each dia meter of pipe below. 75 mm ( 150 to 170 gm/joint)

NS 36 - Providing, fixing, testing & commissioning of Drip Seal (Density 1.95 gm/cc) joints to .C.I. pipes and specials including cost of drip seal, yarn and tools etc of approved make (as per approval of engineer-in-charge). The drip seal shall be in two pack system which hardnes on mixing. Drip shall have setting time of 4 to 6 hours and shall able to stand pressure of 20 kg/cm2 afrer hardeing. Drip seal shall be provided in quantity as indicated against each dia meter of pipe below. 150 mm ( 300 to 350 gm/joint)

NS 37 - Providing, fixing, testing & commissioning of CP Brass floor Cleanout Plug as per drawing complete with G.I. Socket jointed to drainage pipe outlet with drip seal joint. 100mm dia

NS 38 - Providing, fixing, testing & commissioning of CP Brass floor Cleanout Plug as per drawing complete with G.I. Socket jointed to drainage pipe outlet with drip seal joint. 150mm dia

NS 39 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 65 mm nominal outer dia Pipes

NS 40 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 80 mm nominal outer dia Pipes

NS 41 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes

NS 42 - Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 20mm nominal bore

NS 43 - Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 25mm nominal bore

NS 44 - Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 32mm nominal bore

NS 45 - Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 40mm nominal bore

NS 46 - Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 50mm nominal bore

NS 47 - Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 65mm nominal bore

NS 48 - Providing, fixing, testing and commissioning of Air Release Valves screwed ends with ball valve of approved brand of manufacture, with accessories etc., complete. 15mm dia

NS 49 - Providing, fixing, testing & commissioning of class-O Careflex ST insulation 6mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer in charge. 16mm nominal bore (6 mm thick insulation)

NS 50 - Providing, fixing, testing & commissioning of class-O Careflex ST insulation 6mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer in charge. 22mm nominal bore (6 mm thick insulation)

NS 51 - Providing, fixing, testing & commissioning of class-O Careflex ST insulation 6mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer in charge. 28mm nominal bore (32 mm thick insulation)

NS 52 - Providing and fixing ball (brass) valve of approved quality. High or low pressure, with plastic floats complete: 32 mm nominal bore.

NS 53 - Providing, laying, jointing, testing, & commissioning of uPVC pipes (I.S.:4985-1981) of 10 kg/cm2 rating with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). (For Irrigation lines). 63mm OD- 10 kg/cm²

NS 54 - Providing, laying, jointing, testing, & commissioning of uPVC pipes (I.S.:4985-1981) of 10 kg/cm2 rating with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). (For Irrigation lines). 32mm OD- 10 kg/cm²

NS 55 - Providing, laying, jointing, testing, & commissioning of uPVC pipes (I.S.:4985-1981) of 10 kg/cm2 rating with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). (For Irrigation lines). 25mm OD- 10 kg/cm²

NS 56 - Providing and fixing solar water heating system complete with solar panels, insulated SS 304 storage vessel with cemamic lining inside & interconnecting pipes and valves complete in all respect as per manufacturer specifications. Tank shall be supplied without electrical boosters. (The Vendor shall include in this rate cost of all interconnecting pipes and valves & insulations connecting the panels). Capacity 300 LPD (comprising 2 nos. collector panels and 300 ltres SS 304 storage vessel)

NS 57 - Providing and fixing vitreous China Sanitary fixturs and CP fitting and other accessaries for Handicapped toilet Hindware Cat no. 70002 (Matrix Set-1) or equivalent make CERA Cat. no. CRANE. Each Matrix Set shall comprised (Wash Basin 65 cm x 35 cm with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm). complete all respect.

NS 58 - Providing and fixing CP brass Sink Mixer, mixing fittings equivalent to (JAQUAR Cat. No. CON-309KNBM.

NS 59 - Providing and fixing C.P. brass twin robe hooks equivalent to JAQUAR Cat. No. 1161.

NS 60 - Providing, fixing, testing & commissioning Soap Dispenser equivalent to (JAQUAR Cat No. ACN-1137N).

NS 61 - Providing, fixing, testing & commissioning S.S. hinged grating, 1.5mm thick with frame equivalent to JAYNA NEW HEAVY GRATINGS Cat. No. NHG 140 including setting in floor with cement mortar 1:3.

NS 62 - Providing and fixing automatic high pressure electric water heaters equivalent to JAQUAR with glass lining thermostats with each element and high temperature cut off, necessary insulation, safety valve, etc. all complete. 25 litres

NS 63 - Providing and fixing automatic high pressure electric water heaters equivalent to JAQUAR with glass lining thermostats with each element and high temperature cut off, necessary insulation, safety valve, etc. all complete. 50 litres

NS 64 - Providing and Fixing Health Faucet equivalent to JAQUAR Cat No. ALD-573 make with flexible pipe and wall hook with each European W.C. Pan.

NS 65 - Providing, fixing, testing & commissioning CP concealed body single lever diverter with 40mm cartige equivalent to JAQUAR Cat No. ALD-075.

NS 66 - Providing, fixing, testing & commissioning CP single lever exposed parts kit of divertor equivalent to JAQUAR Cat No. FUS-29075K.

NS 67 - Providing, fixing, testing & commissioning CP brass shower rose with shower arm equivalent to JAQUAR Cat No. OHS-1989 & SHA-477.

NS 68 - Providing, fixing, testing & commissioning CP brass bath spout with wall flange equivalent to JAQUAR (Bath Spouts) Cat No. SPJ-429.

NS 69 - Providing, fixing, testing & commissioning C.P. brass soap dish equivalent to (Jaquar Cat. No. CAN-1131N) including cutting and making good the walls wherever required complete to the satisfaction of Engineer in charge.

NS 70 - Providing, fixing, testing & commissioning C.P. brass Towel Rail 24" equivalent to JAQUAR Cat. No. ACN-1111SM.

NS 71 - Providing and fixing CP brass Auto closing Concealed Urinal Flush Valve With Wall Flange Jaquar Cat No. PRS-073 or approved equivalent.

NS 72 - Providing and fixing S.STEEL Hand Dryer (HEAVY TRAFFIC) EURONICS Cat No. EH 26NW fixed in position by means of C.P. screws and rawl plugs embedded in the walls complete including cutting and making good the walls wherever required.

NS 73 - Providing and fixing white glazed vitrious China Wash Basin with C.P. brass waste 32mm C.P., C.P. brass Self Closing Pillar Tap and unions and sealing of joints between wash basins and counter slabs around the wash basins with the Silicone rubber cement of approved make of matching colour all complete including cutting and making good the walls and floors wherever required. Hindware Wash Basin ROUND Cat. No. 10065 (size 44 cms Dia.), Jaquar Cat. No.-CNS-WHT-705 (Size(mm) 595x420x200) & CERA Cat. No.-1005A (Size-560x470x190mm)(Under Counter) or approved equivalent make with Auto Closing System (HindwarePressmatic Pillar Cock(Self Close) Cat. No. F310001, Jaquar Cat No. PRS-CHR-031) & CERA Cat. No. F9020101 or approve equivalent make.

NS 75 - Providing, laying, jointing, testing, & commissioning the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor including supplying and making end termination with brass compression glands: 3 core x 10 sq.mm

NS 76 - Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm dia pipe

NS 77 - Providing, fixing, testing & commissioning of Drainage Provision for the risers with necessary 40 mm dia pipe, ball valve etc as required. Maximum length of pipe shall be 10 M.

NS 78 - Providing, fixing, testing & commissioning of 25 mm dia screwed inlet forged brass single acting air valves connected with ball valve on inlet side at top of the Risers.

NS 79 - Providing, fixing, testing & commissioning of door with frame for all internal fire hydrants fabricated from 18 gauge CRCA M.S. sheet double door including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 5 mm thick float glass approved by local Fire Authority, stove enameled fire red finish with " fire hose' written on front with radium strip suitable to house 15 mm long four length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.).

NS 80 - Providing, fixing, testing & commissioning of standard Fireman's Axe with heavy insulated rubber handle.

NS 81- Providing, installation, testing and commissioning of ABC type fire extinguishers consisting of welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 6 kg. I.S.I. Marked.

NS 82 - Providing, installation, testing and commissioning of Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. I.S.I. Marked.

ELECTRICAL WORKS

ADDITIONAL BAY IN LT & EMERGENCY PANEL, MAIN DISTRIBUTION BOARDS AND DISTRIBUTION BOARD

NS 83 - ADDITIONAL BAY IN LT PANEL

Supplying, installation, testing and commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical additional bay in existing indoor type floor mounted, free standing extendable type Main LT Panel with IP - 42 protection, compartmentalized design and fabricated out of 2 mm / 1.6 mm CRCA sheet steel complete with extende of Aluminium Bus bars. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Incomings / Outgoings cables and also outgoing terminations for various sizes of cables, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, adequate size bus duct/cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing.

BUSBAR

1 Set of TPN aluminium bus bar of 1200A capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc, for withstanding fault level of 31 MVA for 1 Sec.

OUTGOING:

2 nos. 630A 415V, TP+N MCCB of 35kA with microprocessor based release having O/L and S/C protection and a set of CT's., Multi Function Metre (V+A+Hz) with one set of indicating lamps to indicate ON, OFF, TRIP indication with 2A MCB, Operating handle and neutral link.

NS 84 - ADDITIONAL BAY IN EMERGENCY PANEL

Supplying, installation, testing and commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical additional bay in existing indoor type floor mounted, free standing extendable type Emergency Panel with IP - 42 protection, compartmentalized design and fabricated out of 2 mm / 1.6 mm CRCA sheet steel complete with extende of Aluminium Bus bars. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Incomings / Outgoings cables and also outgoing terminations for various sizes of cables, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, adequate size bus duct/cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing.

BUSBAR

1 Set of TPN aluminium bus bar of 800A capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc, for withstanding fault level of 31 MVA for 1 Sec.

OUTGOING:

2 nos. 250A 415V, TP+N MCCB of 35kA with microprocessor based release having O/L and S/C protection and a set of CT's., Multi Function Metre (V+A+Hz) with one set of indicating lamps to indicate ON, OFF, TRIP indication with 2A MCB, Operating handle and neutral link.

1 no. 200A 415V, TP+N MCCB of 35kA with microprocessor based release having O/L and S/C protection and a set of CT's., Multi Function Metre (V+A+Hz) with one set of indicating lamps to indicate ON, OFF, TRIP indication with 2A MCB, Operating handle and neutral link.

NS 85 - MAIN DISTRIBUTION BOARD & SUB DISTRIBUTION BOARD

Supplying, fixing ,testing and commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2 mm / 1.6 mm CRCA sheet steel complete with Aluminium Bus bars, Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Incomings / Outgoings cables and also outgoing terminations for various sizes of cables, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, adequate size bus duct/cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing.

MDB-2 LIGHTING (Loc. at Ground Floor)

INCOMER

1 nos. 250A 415V, 4P MCCB of 25kA with microprocessor based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 250/5A and 2A MCB.

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 1&2.

BUS BARS:

300A TPN bus bars of aluminium alloy.

OUT GOING:

5 nos. 63A 415V, TP+N thermal based release MCCB of 16kA.

5 nos. 32A 415V, TP+N thermal based release MCCB of 16kA.

NS 86 - MDB-2 POWER (Loc. at Ground Floor)

INCOMER

1 nos. 630A 415V, 4P MCCB of 25kA with microprocessor based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 600/5A and 2A MCB

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 1&2.

BUS BARS:

600A TPN bus bars of aluminium alloy.

OUT GOING:

5 nos.100A 415V, TP+N thermal based release MCCB of 16kA.

6 nos. 63A 415V, TP+N thermal based release MCCB of 16kA.

NS 87 - MDB-UPS (Loc. at Ground Floor)

INCOMER

1 nos. 200A 415V, 4P MCCB of 25kA with microprocessor based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 200/5A and 2A MCB

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 1&2.

BUS BARS:

300A TPN Cu. bus bars

OUT GOING:

2 nos. 100A 415V, TP+N thermal based release MCCB of 16kA.

3 nos. 63A 415V, TP+N thermal based release MCCB of 16kA.

6 nos. 40A 415V, TP+N thermal based release MCCB of 16kA.

NS 88 - SDB-1,2&3 LIGHT (Loc. at 1st, 2nd & 3rd Floor)

INCOMER

1 nos. 63A 415V, 4P MCCB of 25kA with thermal based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 60/5A and 2A MCB

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 2.

BUS BARS:

200A TPN bus bars of aluminium alloy.

OUT GOING:

7 nos. 32A 415V, TP+N thermal based release MCCB of 16kA.

NS 89 - SDB-1,2&3 POWER (Loc. at 1st, 2nd & 3rd Floor)

INCOMER

1 nos. 100A 415V, 4P MCCB of 25kA with thermal based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 100/5A and 2A MCB

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 2.

BUS BARS:

300A TPN bus bars of aluminium alloy.

OUT GOING:

7 nos. 63A 415V, TP+N thermal based release MCCB of 16kA.

NS 90 - SDB-1&3 UPS (Loc. at 1st & 3rd Floor)

INCOMER

1 nos. 63A 415V, 4P MCCB of 25kA with thermal based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 60/5A and 2A MCB

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 2.

BUS BARS:

150A TPN Cu. bus bars

OUT GOING:

6 nos. 40A 415V, TP+N thermal based release MCCB of 16kA.

NS 91 - SDB-2 UPS (Loc. at 2nd Floor)

INCOMER

1 nos. 100A 415V, 4P MCCB of 25kA with thermal based release having O/C, S/C & E/F release.

1 no. Digital multifunction meter (V+A+Hz) with a set of cast resin CTs 100/5A and 2A MCB

1 Set of phase indicating lamp with MCB.

1no. TPN surge protection device of type 2.

BUS BARS:

150A TPN Cu. bus bars

OUT GOING:

3 nos. 63A 415V, TP+N thermal based release MCCB of 16kA.

5 nos. 40A 415V, TP+N thermal based release MCCB of 16kA.

NS 92 - MCCB FOR UPS

Supplying of 200A 415V, 4P MCCBs of 25kA with microprocessor release having O/L, S/C protection in sheet enclosure including drilling holes on the wall/ board complete with connection, earthing the body etc. as required.

NS 93 - Supplying & fixing following rating 240 volts, 2 Pole RCBO in the existing MCB DB complete with connections, testing and commissioning etc. as required.

NS 93 (a) - 32A DP RCBO

NS 93 (b) - 40A DP RCBO

NS 94 - Supplying & fixing following rating 415 volts, Four Pole RCBO in the existing MCB DB complete with connections, testing and commissioning etc. as required.

NS 94 (a) - 40A FP RCBO

NS 94 (b) - 63A FP RCBO

SUPPLY OF LIGHT FIXTURE AND FANS

LIGHT FIXTURE

NS 95 - 1 x 12 watt Recessed mounting type LED light fixture complete with all accessories as required.( eq to Wipro cat. No.LD80-101-XXX-60-XX )

NS 96 - 1 x 18 watt Recessed mounting type LED light fixture complete with all accessories as required.( eq to Wipro cat. No.LD80-171-XXX-60-XX)

NS 97 - 1 x 18 watt Surface mounting type LED light fixture complete with all accessories as required.( eq to Wipro cat. No.LD80-171-XXX-60-SM)

NS 98 - 1 x 30 watt Surface mounting type LED light fixture complete with all accessories as required.( Eq. to Wipro cat. no. LM34-401XXX57SMWG2 )

NS 99 - 1 x 36 watt Recessed mounting type LED light fixture complete with all accessories as required.( eq to Wipro cat. No. CRCO10R038HP57GL)

NS 100 - 1 x 80 watt LED Flood light fixture complete with all accessories as required. ( eq to Wipro cat. No. LH21-122-060-57-XX)

NS 101 - Exhaust fan of 230mm sweep, metal body, 1400RPM, with 450 CFM free air delivery, AC 230V/415V , 50 Hz, single phase complete with all necessary accessories for completing installation as per specification complete as required.

STRUCTURED CABLING SYSTEM PASSIVE

NS 102 - Supply , Installation , Testing and Commissioning of armoured 6 core Singlemode OFC cable for interfloor switches connectivity . complete as required.

NS 103 - Supply , Installation , Testing and Commissioning of 6 port loaded LIU with LC adaptor plates , pigtel cables etc complete as required.

NS 104 - Supply , Installation , Testing and Commissioning of 24 port loaded LIU for with LC adaptor plates , pigtel cables for core switch to access switch connectivity over fiber . complete as required.

NS 105 - Supply , Installation , Testing and Commissioning of LC-LC singlemode fiber patch cord for LIU to switch connectivity . complete as required.

NS 106 - Supply , Installation , Testing and Commissioning of CAT6 information outlet (I/O) for data at user end complete as required.

NS 107 - Supply , Installation , Testing and Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end . complete as required.

NS 108 - Supply , Installation , Testing and Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity . complete as required.

NS 109 - Supply , Installation , Testing and Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity complete as required.

NS 110 - Supply , Installation , Testing and Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side.

NS 111 - Supply , Installation , Testing and Commissioning of 42U (600W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts complete as required.

NS 112 - Supply , Installtion , Testing and Comissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts complete as required.

IP-PBX SYSTEM

NS 113 - Supply , Installation , Testing and Commissioning of Type 1 IP Phone with 1 Voip accounts, 1 Lines , Graphic LCD display complete as required.

LOCAL AREA NETWORK ( LAN )

NS 114 - Supply, Installation, Testing & Commissioning of Core Switch with 32x 1G SFP+ ports with 4 X10G SFP+ ports expandable to 8 more SFP+ (Total 12 SFP+)with 2x 40G QSFP+ ports with switching capacity of 464 Gbps, forwarding performance of 345 Mpps, dual hot swappable internal power supply, 12K IPv6 routes and 12K IPv6 multicast routes. Should support advance layer 3 (RIPng, OSPF, BGP and MPLS) with 1 year support. NDcPP Certified, Switch OEM should be leader in Gartner report / Forrester reports, In Existing server room phase-I complete as required.

NS 115 - Supply, Installation, Testing & Commissioning of Access switch of 24 Port POE+ Access Switches with switching capaticy of 128 Gbps, forwarding performance 95 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 360W, with 4x 10G SFP+ uplink ports. Should have support for Stacking/VC with stacking bandwidth of maximum 80 Gbps. Should support min 2GB internal DRAM, 2GB internal Flash memory,16K MAC address, Should have static and RIP Routing from day 1 and should support OSPF, VRRP, IPv6 features including Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS) , OSPFv3 and static routing as well. NDcPP Certified, Switch OEM should be leader in Gartner/Forrester report Quadrant With DAC Cable complete as required.

NS 116 - Supply , Installation , Testing and Commissioning of fiber Modules 1 G BASE complete as required.

NS 117 - Supply, Installation, Testing & Commissioning of Stacking Cables complete as required.

NS 118 - Supply, Installation, Testing & Commissioning of Appliance based customised ITAM for asset inventory management with ability to map physical locations and exact rack elevations for audit and support control. Appliance shall be Intel x86 based device with secure intranet server with Linux Based operating system and relational databases for long term storage. Appliance includes license for 100 units under control complete as required.

Wi-Fi SYSTEMS & NGGW

NS 119 - Supply, Installation, Testing & Commissioning of the Microservices based WLAN Architecture. The indoor AP should have radios to support 2.4Ghz and 5 Ghz band in a 4X4:4 Mu-MIMO configuration with support for 802.11 a/b/g/n/ac. The AP should have internal Omni Antennas and should support vBLE and RF optimization. It should also support way finding and asset tracking via bluetooth.Should support Artificial Intelligence platform, WIPS/WIDS to detct Rogue APs and the facility to terminate connevction to the Rogue APs.Plenum rated and support for UL 60950-1 CAN/CSAC22.2 No. 60950-1, FCC Part 15.247, 15.407, 15.107, and 15.109 RSS247 ICES003 complete as required

IP CCTV SYSTEM

NS 120 - Supply, installation, testing and commissioning of Dome Camera , Resolution upto 5 MP , Quad stream with each stream support H.265 + compression simultaneously , fixed focal lens 3.6mm , ,1/2.8" CMOS sensor Min illumination : Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter Speed : 1/5 ̴ 1/100,000 s , Video Compression : H.265+ ,H.265 ,H.264+ H.264 , frame rate : Main stream upto 5MP@25fps , substream upto 2MP@25fps , third and fourth stream upto VGA@25fps . Edge analytics :Motion Detection, Perimeter Intrusion, Line Crossing, Stationary Object, Face detection (deep learning) ,Cross counting , Pedestrian detection ,Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE ,ONVIF profile S , G& T . UL , CE ,FCC Certified complete as required.

NS 121 - Supply, installation, testing and commissioning of Bullet Camera , Resolution upto 5 MP , Quad stream with each stream support H.265+ compression simultaneously, fixed focal lens 3.6mm , ,1/2.8" CMOS sensor Min illumination : Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter Speed : 1/5 ̴ 1/100,000 s , Video Compression : H.265+ ,H.265 ,H.264+ H.264 , frame rate : Main stream upto 5MP@25fps , substream upto 2MP@25fps , third and fourth stream upto VGA@25fps . Edge analytics :Motion Detection, Perimeter Intrusion, Line Crossing, Stationary Object, Face detection (deep learning) ,Cross counting , Pedestrian detection ,Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE ,ONVIF profile S , G& T . UL , CE ,FCC Certified complete as required.

NS 122 - Supply, installation, testing and commissioning of 64 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be integrated with NVR . Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000 ,A.I maximum captured quantity 200,000. . UL,CE,FCC certified complete as required.

NS 123 - Supply , Installation , Testing and Commissioning of 8TB Surviellance Hard Disk. Complete as required.

NS 124 - Supply , Installation , Testing and Commissioning of Full HD 55" LED Professional Display Panel complete as required.

NS 125 - Supply, Installation, Testing and Commissioning of 24 port Fabric (SFP) switch with 20 Nos. of 20 100M/1G SFP Port , 4 Nos. of GbE RJ45/SFP Combo Port , 4 Nos. of 1G/10G SFP+ Port ,1 X Console , Switching bandwidth 128 Gbps , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server complete as required.

NS 126 - Supply, Installation, Testing and Commissioning of 24 port L2 Managed switch having port density 24 Nos. of 10M/100M/1G RJ45 Port POE/POE+ ports , 4 Nos. of 1G/10G SFP+ Port , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified complete as required.

NS 127 - Supply, Installation, Testing and Commissioning of Industrial grade switch 4 x 10/100/1000Base‐T Ports POE + 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 120W , 8K MAC address table , Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 40 protection , DIN rail for wall mount , OPerating temperature -40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC complete as required.

NS 128 - Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest complete as required..

PA SYSTEM

PAGING STATION

LT CABLE

NS 130 - Supplying the following 1100V grade XLPE Insulated Aluminum Conductor Armoured cables, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.

NS 130 (a) - 3.5C x 150 sq.mm. AL. ARM. XLPE cable

NS 130 (b) - 3.5C x120 sq.mm. AL. ARM. XLPE cable

NS 130 (c) - 3.5C x95 sq.mm. AL. ARM. XLPE cable

NS 130 (d) - 4C x 35 sq.mm. AL. ARM. XLPE cable

NS 130 (e) - 4C x 25 sq.mm. AL. ARM. XLPE cable

NS 130 (f) - 4C x 10 sq.mm. AL. ARM. XLPE cable

UNDER FLOOR / SURFACE RACEWAYS

NS 131 - Supplying and fixing 16 SWG single compartment (pre-galvanised) trunking with 16 SWG (pre-galvanised) open able covers at regular intervals along with necessary cable support system as directed including providing and fixing accessories like dash fasteners cable ties etc. Complete in all respects. (All Trunking is to be cleaned thoroughly with industrial type vacuum cleaner, before pulling any wires / cables). Including Cutting / chasing of Floor and making good shall be carried out by Civil Contractor. Note that all under floor GI Trunking shall be properly tapped with masking tape at all joints before PCC is filled into chased bed) complete as required.

NS 131 (a) - 300 mm x 25 mm deep under floor.

NS 131 (b) - 225 mm x 25 mm deep under floor.

NS 131 (c) - 150 mm x 25 mm deep under floor.

NS 132 - Supplying and Fixing following Galvanised Under Floor junction Box with cover plate. (Please note all Junction Boxes are to be covered with thick polythene sheets during construction to prevent any foreign material / ‘Malba’ From entering the trunking).(All cleaning of under floor raceways is to be carried out with vacuum cleaner) complete as required.

NS 132 (a) - 400 mm x 400 mm x 50 mm deep

NS 132 (b) - 300 mm x 300 mm x 50 mm deep.

NS 132 (c)- 225 mm x 225 mm x 50 mm deep

NS 133 - Supplying and fixing 16 SWG single compartment (pre-galvanised) trunking with 16 SWG (pre-galvanised) open able covers at regular intervals along with necessary cable support system as directed including providing and fixing accessories like dash fasteners cable ties etc. Complete in all respects. (All Trunking is to be cleaned thoroughly with industrial type vacuum cleaner, before pulling any wires / cables). Including installation on surface / ceiling complete as required

150 mm x 50 mm deep under floor.

NS 134 - Supplying and Fixing following Galvanised junction Box with cover plate for above raceway complete as required.

225 mm x 150 mm x 75 mm deep

DUMBWAITER

NS 135 - Supply, fixing, testing and commissioing of fire rated, EN 81.3 or UL standard Dumbwaiter with following specification:

Drive Unit - 3 phase elctrical motoer equipped with electrcomegnetic disk brake and reduction worm gear box.

Speed - 0.35 metre / second.

Service Load - 100 Kg.

Number of stop - two.

Maximum structure Height - 7 metre.

Car - Construcuted in mild steel, finished in instainless steel AISI 304, with option of base and shelf in stainlees steel.

Entrances - Three

Landing door - Rise and fall shutters in stainless steel AISI 304.

NS 136 - Landing push button station - Call and dispatch push button at each floor, ' Lift arrival', 'lift position' and ' lift occupied' indicators and Audible lift arrival buzzer.

Bidder Name

Amount

GUPTA ENTERPRISES(GSTN-07AAAFG6087F1ZF)

R AND B INFRA PROJECT PRIVATE LIMITED(GSTN-27AAECM3616P1Z3)

Kanwar Enterprises Pvt Ltd(GSTN-09AACCK6205E1ZT)

PRAGMATIC INFRASTRUCTURE LIMITED(GSTN-NA)

S K Integrated Consultants(GSTN-NA)

M/s ASHA ENTERPRISES PVT. LTD.(GSTN-NA)

Bidder Name

Amount

GUPTA ENTERPRISES(GSTN-07AAAFG6087F1ZF)

R AND B INFRA PROJECT PRIVATE LIMITED(GSTN-27AAECM3616P1Z3)

Kanwar Enterprises Pvt Ltd(GSTN-09AACCK6205E1ZT)

PRAGMATIC INFRASTRUCTURE LIMITED(GSTN-NA)

S K Integrated Consultants(GSTN-NA)

M/s ASHA ENTERPRISES PVT. LTD.(GSTN-NA)

Description of Work / Item(s)

Amount

Schedule-(E)-Non Schedule Item for Disposal of Rock and Moorum (Credit Item)

Deduction for removal and sale of Surplus excavated Rock and Moorum from site by Mechnical Transport including all lead and lifts, loading and unloading. The Contractor shall employ/engage only his/their own personnel and shall keep the Ramanujan College fully indemnified againt any claim whatsoever including claim for wage, injuries, compensation, death eatc.

Moorum/Soft Rock

Hard Rock

GUPTA ENTERPRISES

M/s ASHA ENTERPRISES PVT. LTD.

S K Integrated Consultants

R AND B INFRA PROJECT PRIVATE LIMITED

Kanwar Enterprises Pvt Ltd

GUPTA ENTERPRISES

M/s ASHA ENTERPRISES PVT. LTD.

S K Integrated Consultants

R AND B INFRA PROJECT PRIVATE LIMITED

Kanwar Enterprises Pvt Ltd

M/s ASHA ENTERPRISES PVT. LTD.

Kanwar Enterprises Pvt Ltd

S K Integrated Consultants

GUPTA ENTERPRISES

R AND B INFRA PROJECT PRIVATE LIMITED

PRAGMATIC INFRASTRUCTURE LIMITED

S K Integrated Consultants

M/s ASHA ENTERPRISES PVT. LTD.

R AND B INFRA PROJECT PRIVATE LIMITED

Kanwar Enterprises Pvt Ltd

GUPTA ENTERPRISES

S K Integrated Consultants

M/s ASHA ENTERPRISES PVT. LTD.

R AND B INFRA PROJECT PRIVATE LIMITED

Kanwar Enterprises Pvt Ltd

M/s ASHA ENTERPRISES PVT. LTD.

S K Integrated Consultants

Kanwar Enterprises Pvt Ltd

GUPTA ENTERPRISES

R AND B INFRA PROJECT PRIVATE LIMITED