PROVN OF DRAINAGE 140 MTRS ALONGWITH REQD CULVERT NEAR SHED NO 3 AND BLDG NO T 9 AT AALC AND OTHER SANCTIONED WORKS UNDER GE SOUTH BANGALORE

Amount

M&L for excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. or for shafts, wells cesspits, manholes, pier holes etc n.exc. 10 sqm on plan and n. exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry 1:3 :6 type C1 (using 20mm graded stone aggregate) solid blocks, exc.10 cm in width and setting in cement mortar 1:6, grade C-5 conforming to IS 2185 complete all as specified and as directed.

M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, kerbs incl. weathering slightly rounded or chemfered angles and throating complete all as specified and as directed.

M&L for providing plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in drain and surface channel, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 incl. finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of whtie wash complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs setting in cement mortar 1:4, complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl. cranking, bending spirally for hooping for columns, hooking ends and binding with and incl. mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for excavation over areas, n.exc. 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for providing reinforced concrete pipes, class NP3, 450 mm bore, laid and jointed complete with collars etc. all as specified and as directed.

M&L for providing moorum/red bajri filling in floors or pavings laid in layers n.exc. 15 cm thick spread, levelled, rammed and watering complete all as specified and as directed.

Returning filling including levelling and watering in layers n. exc. 25 cm thick in hard/dense soil complete all as specified and as directed.

Removing excavated material exc. 250 m but n. exc. 500 m and depositng where directed all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. or for shafts, wells cesspits, manholes, pier holes etc n.exc. 10 sqm on plan and n. exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for providing reinforced cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M&L for providing reinforced cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate, as in chajjas complete all as specified and as directed.

M&L for providing reinforced cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate, as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like complete all as specified and as directed.

M&L for formwork to chajjas, beams and similar items etc. complete all as specified and as directed.

M&L for form work to soffits of suspended slab such as roof slabs, floor slabs etc. not exceeding 200mm thick (Horizontal or sloping) complete including fair finished surfaces all as specified and as directed.

S&F mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required, including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F mild steel TMT bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length bent to shape required, including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately under relevant item of this schedule.

Supply only integral waterproofing compound of approved make complete all as specified and as directed.

M&L for spreading and levelling excavated material in layers n.exc. 25 cm thick incl. watering and well ramming complete all as specified and as directed.

Removing excavated material, n. exc. 50 M and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed .

M&L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl. finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on brick work or concrete surface as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on exposed concrete surface as in columns, beams, facia, drop, chajjas etc in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on brick work or concrete surfaces as in backing coat for tiles etc complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface exceeding 0.06 sqm but not exceeding 0.11 sqm 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and as directed.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and smooth without using extra cement.as in plinth protection incl. joints filling complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of walls etc and applying two coats of white wash complete all as specified and as directed.

S&F 35 mm thick 2nd Class HW rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, look strike plate, etc complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, kerbs incl. weathering slightly rounded or chemfered angles and throating complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy fixed complete all as specified and as directed.

S&F 150 mm aluminium extruded alloy handles, fabricated type, anodised & fixed complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm long medium weight, cold rolled, mild steel butt hinges complete all as specified and as directed.

M&L for machine cut cuddapa stone slab slab as in 20-25mm thick as in platform laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc. 0.5 sqm in each pane complete all as specified and as directed.

M&L for surface dressing n. exc. 15 cm deep in soft/loose soil complete all as specified and as directed.

M&L for hard core with broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and well rammed complete all as specified and as directed.

M&L for providing 75 mm thick cement concrete 1:5:10 type E-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Demolition of cement concrete in ground floors n. exc. 15 cm thick below or above ground level and removing the debris outside MD land at own cost and arragement of contractor complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cment mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling fencing posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft loose soil complete all as specified and as directed.

Cutting into old masonry built in cement mortar to form toothings for and bonding in new brick or stone work incl. making good in cement mortar complete all as specified and as directed.

Removing excavated material (soil) out side the MD land at own cost and arragement of contractor.

M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed

S&F mild steel work in fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F mild steel tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts confoming to Fe- 290 Gde-E-165 complete all as specified and as directed

S&F mild steel round bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally hooping for columns, hookind ends and binding with mild steel wire annealed not less than 0.90 mm dia or securing with clips quality conforming to Fe-410 W (Gde. E-250) quality A or Fe 290 (Gde E-165) complete all as specified and as directed.

Supply only chain link fencing mesh 50X50 mm mesh size any description complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S&F Galvanised Barbed wire 2 strand with 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings including dismantling existing barbed wire fencing wire complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for providing 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in floor complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Joint free) (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for glazed coloured cermaic tiles 350x 250x 7mm/ 450X 350X 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking up or down steel tubing and connections,15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15mm bore, concealed steel water tubing, medium grade, galvanised with all fittings and fixed to walls and ceiling or laid into floor, including removing the existing unserviceable GI tubing complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and making good, cutting not exc 20 cm girth complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore, fancy type, chromium plated angle valve, screwed both end for iron pipe or for unions, high pressure having crutch handle complete all as specified and as directed.

S&F 15mm bore Pillar tap, cast copper alloy with chromium plated fancy type screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and as directed.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repairs of PVC valveless syphonic action type 10Ltr capacity flushing cistern with inlet , ball valve and handle complete all as specified and as directed.

S&F 32mm dia polyethylene flush pipe for low level flushing cistern complete all as specified and as directed.

S&F of vitreous china wash basin white flat back of size 550x400 mm including cutting pinning in end of brackets or erecting stand but exclusive of waste pipe complete all as specified and as directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F push tap 15 mm bore for urinals any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 50gms) complete all as specified and as directed.

S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 32/40 mm dia PVC flexible waste pipe for urinals/WHB 600 mm long with PVC coupling complete all as specified and as directed.

Taking down door/window frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and as directed.

M&L for cutting holes in brick walls in cement mortar exc. half brick wall but n.exc. one brick wall for inserting holdfasts and making good disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters of any colour (Thickness or powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in openings as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded wood green printed PVC "C" channel having a PVC sheet strip of 20mm wide stuck in side with solvent cement for stiles and wood grain printed sheet for top rail & bottom rail. Paneling of wood grain sheet for top rail lock rail & bottom rail. Paneling of wood grain printed sheet to be fitted in the MS frame welded/sealed to stiles and rails with 5mm thickx15mm wide PVC sheet beading used inside styles & rails and decorated PVC beading of 10mmx10mm (90 degree) used and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing as per SSR Part -I, complete all as specified and as directed.

S&F aluminium anodised alloy barrel tower bolt 200mm size complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surface and applying two coats of oil bound distemper over a coat of primer incl. 1mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets exc 15cm spacing complete all as specified and as directed.

Dismantling fillets, rails, posts, rafters, purlins, and in any position, under 40 sq. cm in section in any position for unframed work complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Joint free) (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick plasteringon walls in cement mortar (1:4) complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6, on brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necssary formwork complete all as specified and directed

M&L for rough finished (flat) form work to sides and soffits of floor or roof beams, beam haunchings, girders ,bressummers, lintels, cantilevers, shelves including supports,overhangs,etc..also splays between floors and beams complete all as specified and as directed.

M&L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket frame (beam, tee, angle, channel or flat section) including distance pieces, cleats conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators including rubber beading, rollers, locking arrangements and jointing cleat for fixing etc..complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc..with ends of bars shouldered and/or riveted framed guard bars, barred iron doors ladders framed balusters etc conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F second class hard wood glazed and skelton shutters, 35 mm thick, open rebated and prepared to receive glass, gauaze, etc., with sash bars, edges of framing moulded, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and as directed.

M&L for providing 75mm thick PCC 1:3 : 6 type C2 using 40mm graded stone aggregate, as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls and applying one coat of cement based paint complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. .

M&L for powder coated aluminium snap grid frame work (minimum thick of powder coating 50 micron) for false ceiling and size of grid 605 x 605 mm complete all as specified and as directed.

S&F plain mild steel wire 3.15 mm dia galvanised class 3 for hanging ceiling frame work complete all as specified and as directed.

M&L for PCC 1:2:4, type B2 using 40 mm graded ston aggregate for embedding of fencing posts complete all as specified and as directed.

S&F 4mm thick non asbestos cement building boards in ceiling fixed or laid/inserted to aluminium frame work with screws complete all as specified and as directed.

Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium/copper point wiring for light, fan, socket 5 Amps and15 Amps complete and removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc. complete all as specified and as directed.

Material and labour for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories and making good disturbed surfaces in cement mortar 1:3 for one piano type switch single pole one ways 05 Amp, complete all as specified and as directed.

All as pr item No. 130 here in before but for one fan point controlled by one switch complete all as specified and as directed.

All as pr item No. 130 here in before but for one 3/2 pin 5 Amp socket out let point on the independent board complete all as specified and as directed.

All as pr item No. 130 here in before but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches complete all as specified and as directed. .

S&F switch piano flush type, 5 Amps single pole, one way, 230 volts all as specified and as directed.

S&F switch socket outlet 2 in 1, 3 pin, 5Amps complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin 5 Amps flush type universal all as specified and as directed.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals all as specified and as directed.

S&F stepped type electronic fan regulator flush type, 230V AC all as specified and as directed.

S&F MCB in repairs SP 06-32 Amps, AC, 240 volts, 50 Hz, 10 KA rating "C' Curve complete all as specified and as directed.

S &F in repairs MCB SPN 6 -32 Amps, 240 Volts 50 Hz, 10 KA rating "C' Curve complete all as specified and as directed.

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral Double door, 8 way, 240 Volts

S&F LED batten suitble for indoor application 10 W, 2' length, polycarbonate housing with end cap made of ABS plastic with white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing unserviceable tube light/CFL fittings complete all as specified and as directed. Make :- C&S Cat part No LTTB2F10WLEDEW or equivalent in Havells/Bajaj.

S&F LED batten suitble for indoor application 20 W, 4' length, housing in extruded aluminium natural anodised finish with end cap made of ABS plastic with white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing unserviceable tube light fittings complete all as specified and as directed. Make :- C&S Cat part No LTTB4F20WLEDEW equivalent in Havells/Bajaj.

M&L earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion and taking down old one all as specified and as directed .

M&L for sand cushioning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable) in trenches for cable protection and punned into 15 cm complete aall as specified and as directed. Note: Punned thickness only will be measured and paid.

Supplying and laying sub class 'B' bricks locally available best quality, designation 75 for cable protection complete all as specified and as directed .

Supply & lay LT UG cable XLPE insulated sheathed and armoured with aluminium stranded conductors LT 1100 Volts grade of size 2 core 16 sqmm including removing the existing cable from the trenches all as specified and as directed .

S&F 25 mm bore light grade GI pipe for cable protection fixed to poles/bldg incl. two Nos of MS clamps made to shape out of 25 x 3mm MS flat and painting incl. bolt, nut, washer etc all as specified and as directed

G K CONSTRUCTIONS