Tamil Nadu

Active

Works

Civil Works - Water Works

Special Repairs to Sadayaneri Channel in Vellamadam Village of Eral Taluk in Thoothukudi District

Water Resources Department

Vellamadam (Nazreth) | Tuticorin, Tamil Nadu

Amount: ₹4.5 LCloses: 1 Oct 20264d left

Timeline

Published16 Sept 2026
Closes1 Oct 2026
Bid Opening1 Oct 2026

Tender Value

₹4.5 L

EMD Value

₹4,500

Closing Date

1 Oct 2026, 5:00 pm4d left

Tender Inviting Organisation

Name

Executive Engineer , WRD

Address

Executive Engineer, WRD Lower Thamirabarani and Korampallam Aru Basin Division, Thoothukudi

Work Description

Special Repairs

Tender Information

Tender ID

2026_WRD_700832_1

Reference Number

04/LTKABD/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Lump-sum

Period of Work

180 days

Location

Vellamadam (Nazreth)

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredDuly Signed Tender Document (.pdf)

RequiredWRD Registration and Renewal Details (.pdf)

RequiredSelf Declaration for Site Visit, Tools and Plants and Affidavit attested by Notary Public (.pdf)

RequiredGST Reg, GSTR 3B, IT and Annual Turnover certificate issued by CA (.pdf)

RequiredSite Engineer Certificate (.pdf)

RequiredExperience Certificates for similar works and other related documents (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹4,500

Important Dates

Last Activity

16 Sept 2026

Published

16 Sept 2026

Bid Opening

1 Oct 2026

Download Starts

16 Sept 2026

Download Ends

1 Oct 2026

Submission Starts

16 Sept 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Clearing heavy Jungle as directed by the departmental officers complying with standard specification.	23,000	Cum	-	-
2Fabricating, Supplying and erection of Screw gearing steel shutters of size above 1.00 m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.
2.01	SG Shutter of Size 1.50m x 1.60m	1	Nos	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.26 MB

Work Item Documents

BOQ_842403.xls

BOQ • 0.32 MB

DR4.pdf

Tender Documents • 0.64 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Clearing heavy Jungle as directed by the departmental officers complying with standard specification.

23,000

Cum

2Fabricating, Supplying and erection of Screw gearing steel shutters of size above 1.00 m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.

2.01

SG Shutter of Size 1.50m x 1.60m

Nos