PROVN OF MAINTENANCE STORE DEFICIENT PARKING SHED FOR OFFICERS MARRIED ACCOMMODATION INCLUDING CERTAIN SANCTIONED AND MINOR WORKS AT ARAKKONAM

Amount

Surface excavation not exc 30 cms deep and averaging 15 cms deep and getting out in hard/ dense soil complete all as specified and as directed by Engr-in-charge.

Material and labour for hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cms thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge.

Material and labour for plain cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregate) for floors, 100mm thick complete all as specified and as directed by Engr-in-charge.

Material and labour for plain cement concrete 1:2:4 type (Using 20mm graded stone aggregate) C-2 for floors, 40mm thick and finished smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Supply and fix for 38mm wide glass dividing strips, 3mm thick and inserted in position to conform to design complete all as specified and as directed by Engr-in-charge.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and not exc 1.5m in depth and getting out hard/ dense soil complete all as specified and as directed by Engr-in-charge.

Material and labour for plain cement concrete 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed by Engr-in-charge.

Material and labour for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cms complete all as specified and as directed by Engr-in-charge.

Removing excavated soil to a distance upto 1.5 Km and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

Material and labour for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engr-in-charge.

Supply and fix for structural works as in tubular roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, MS plate, riveting including bending and welding, conforming to Fe-410W Gde E-250 quality A complete all as specified and as directed by Engr-in-charge.

Supply and fix for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering arch shape/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in cladding, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of surfaces and applying two coats of colour wash for walls complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of surfaces and applying two coats of cement base paint for walls complete all as specified and as directed by Engr-in-charge.

Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening complete all as specified and as directed by Engr-in-charge.

Supply and fix for factory made solid PVC moulded door shutters 28 to 30mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, in frame at site complete all as specified and as directed by Engr-in-charge.

Supply and fix for second class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge.

Supply and fix for flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, one face covered with decorative veneer complete all as specified and as directed by Engr-in-charge.

Supply and fix for 1.25mm thickness steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type complete all as specified and as directed by Engr-in-charge.

Supply and fix for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (mimimum thickness of powder coating 50 microns) including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturers catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors /walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets complete all as specified and as directed by Engr-in-charge.

Supply and fix for powder coated anodised sliding or side hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 microns), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as all locking arrangements peg stays 150mm long (1 No), butt hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc., complete all as specified and as directed by Engr-in-charge. Note: Glass and other materials will be measured and paid separately.

Supply and fix for powder coated anodised aluminium grill of 8x8mm bars size of opening 10cms size mesh with aluminium channel 'F' angle 20x15mm aluminium frame work complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick sheet glass, ordinary quality on one side fixed in door /windows, but exc 0.5 sqm in each pane fixed with stainless steel screws, beads /glazing with oil putty etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed by Engr-in-charge.

Supply and fix 4mm thick figured glass, pin head type and glazing, in squares not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:3:6 type C1 (Using 20mm graded stone aggregates) as in bed blocks for hold fasts including necessary formworks complete all as specified and as directed by Engr-in-charge.

Supply and fix for mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by Engr-in-charge.

Supply and fix for 100mm size stainless steel hinges fixed with screws medium weight complete all as specified and as directed by Engr-in-charge.

Supply and fix for 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix for 150mm long stainless steel handles, oval type complete all as specified and as directed by Engr-in-charge.

Supply and fix for aluminum alloy anodised sliding door bolts with hasp and staple and fixing clips of sheet cast extruded section and fixing bolts and sliding bolts of extruded section 250mm long complete all as specified and as directed by Engr-in-charge.

Supply and fix for of 150mm size (overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed by Engr-in-charge.

Material and labour for reinforced cement concrete type B1 1:2:4 (Using 20mm graded stone aggregate) nominal mix as in chajjas complete all as specified and as directed by Engr-in-charge.

Material and labour for formwork to soffts of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (horizontal or sloping) fair finished surfaces of concrete complete all as specified and as directed by Engr-in-charge.

Supply and fix for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

All as per item No.40 here-in-before but 6 to 8mm dia.

Supply and fix for wash hand basin vitreous china, white, flat back, size 550x400mm excluding taps, waste, chain and plug and including brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix for 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm 45 gms complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without letterred 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for coloured vitreous china wash down water closet pan (pedestal pattern) including Vitreous china valveless, syphonic action type, coloured flushing cistern, 10 litres capacity, low level with inlet, ball valve, float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32mm dia, for low level cisterns and plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia stop valve cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed down for GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia bib taps, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed down for GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm PVC (SWR) bends with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm PVC SWR vent cowl complete all as specified and as directed by Engr-in-charge.

Supply and fix for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.

Supply and fix for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed by Engr-in-charge.

Supply and fix for 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm dia tubes medium grade, galvanised with all fittings and fixed complete to walls and ceilings complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia tubes medium grade, galvanised with all fittings and fixed complete to walls and ceilings complete all as specified and as directed by Engr-in-charge.

Supply and fix for anodised aluminium size of 605x605mm snap grid frame work for false ceiling including hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-charge.

Supply and fix for gypsum board 12mm thick in ceiling fixed with independently as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new false ceiling surfaces and applying two coats of plastic emulsion paint over one coat of primer complete all as specified and as directed by Engr-in-charge.

Dismantling timber scantling, in fillets, rails, posts, rafters, purlins etc., unders 40 sq.cm in section, in unframed work complete all as specified and as directed by Engr-in-charge.

Supply and fix for second class hard wood plain fillets, square, rectangular or triangular in setion, sectional area exe 13 sqcm and not exc 25 sqcm complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing surfaces of wood and wood based materials, new or old if any description and girth, not other wise described and treated with two coats of creosote complete all as specified and as directed by Engr-in-charge.

Supply and fix for second class hard wood in scantling timber framed and fixed clean sawn wood complete all as specified and as directed by Engr-in-charge.

Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on new works with two or more coats complete all as specified and as directed by Engr-in-charge.

Dismantling wall and celing boards (fibre, pulp, insulation, etc.,) or insulation boards /blankets, any thickness including cover fillets complete all as specified and as directed by Engr-in-charge.

Material and labour for bonded mineral wool blanket slab made from glass density 48kg/cum 40mm thick one side of blanket /slab covered with polythene based jute hessain cloth and other side with GI wire netting 20x20mm with 25 gauge wire complete all as specified and as directed by Engr-in-charge.

Material and labour for 12mm thick gypsum board (fully perforated) / tiles over rockwool on the side wall of the auditorium/ audiometry on wooden battens with wall supporter for insulation and accoustic purposes, 60x60cm in size, fixed with screws as per manufacturer instructions alongwith joint putty over two coats of colour painting to be match with existing wall panel as specified and directed by Engr-in-Charge.complete all as specified and as directed by Engr-in-charge.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each including removing from site complete all as specified and as directed by Engr-in-charge.

Supply and fix for 12mm thick clear /frosted toughened glass for door/ partition including all fixing/ fittings arrangements (glass to glass hinges of suitable angle, glass handle, floor spring, patch fitting, glass connector, locking arrangement, printed logo etc.,) along with strips (sticker) on glass door complete all as specified and as directed by Engr-in-charge.

Supply and fix for three track powder coated aluminium window/ door frame with sliding shutters with following specification:- (a) Window frame of section 92X31.75X1.2mm @ 0.986 Kg/Rm (b) Window shutters of aluminium weighing not less than 0.55 Kg/Rm (c) Two Nos of glazed shutters with 5.5mm thick plain glass fixing with rubber gasket. (d) One Nos glazed shutter with 0.63mm dia stainless steel wire netting mosquito proofing with fixing arrangements. (e) Aluminium beading as per requirement in fixing for glass and wire mesh joining cleat and including locking arrangement complete all as specified and as directed by Engr-in-charge.

Supply and fix for 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for 12mm thick prelaminated particle board of interior grade, prelaminated with decorative choice laminationon both sides fixed with screws to frame work complete all as specified and as directed by Engr-in-charge.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re-fixing complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs of vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs of 15mm dia bore pipe fancy type stop valves, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm dia bore pipe bib taps fancy tape, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs of PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs of plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix for stainless steel soap dish of size 160x160x90mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for aluminium anodised tubular towel rail 20mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed by Engr-in-charge.

Supply and fix for 32mm dia bore PVC waste pipe for wash basin and urinals complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for PVC bath cabinet mirror of standard size of 400X300X150mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish removed outside the defence land complete all as specified and as directed by Engr-in-charge.

Material and labour for joint free non-skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement fo match, with screed bed 15mm thick in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for 10mm thick screed bed in CM 1:3 for vertical surface tiling complete all as specified and as directed by Engr-in-charge.

Material and labour for glazed ceramic tiles in vertical surface 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge.

Taking down and refixing including easing and adjusting also refixing the builders hardware of wooden, steel /PVC shutters (fixing in the same opening) area exc 1 sqm but not exc 2 sqm each complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old wooden surfaces of any description, over 10cm in width or grith, not other wise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 12mm thick veneered particle boards interior grade, solid core, general purposes type, with face with decorative veneers of one face of type 'BB', fixed with screws to timber frame work complete all as specified and as directed by Engr-in-charge.

Supply and fix for 6mm thick teak wood lipping to 12mm thick particle board complete all as specified and as directed by Engr-in-charge.

Supply and fix for brass drawer handle projecting drop 40x50mm ring on 4 screws plate complete all as specified and as directed by Engr-in-charge.

Dismanting of stone slabs any description or thickness in floors laid bedded and pointed in any mortar including removal of debris material where directed complete all as specified and as directed by Engr-in-charge.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types for platform complete all as specified and as directed by Engr-in-charge.

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old surface including brooming down or steel wire brushing and applying two coats of oil bound distemper over one coat of alkali resistant primer over one coat of chalk whitening (wall putty) over the walls complete all as specified and as directed by Engr-in-charge.

Supply and fix for repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 30mm complete all as specified and as directed by Engr-in-charge.

Material and labour for two coats of oil bond distemper over one coat of alkali resistent primer over one coat of chalk whitening (wall putty) after complete removal of existing old treated surface of walls complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for 300x300x22mm thick designer chequered cement concrete tiles (button pattern) laid over and including 20mm thick screed bed in CM 1:6 jointed with white cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for brick work (half brick wall) with sub class ‘B’ old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in foundation, floor, filling and mass-concrete complete all as specified and as directed by Engr-in-charge.

Supply and fix for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nuts, not exc 5cm long with diameter of shank of 16 to 20mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for structural steel works including stringers, treads, landings, baulster, hand rails including cleats, brackets etc., conforming to Fe–410W Gde E-250 quality A complete all as specified and as directed by Engr-in-charge.

Surface excavation not exc 30cm deep and an average depth of excavation is 24cm and getting out soft /loose soil includes clearing of shrubs, vegetation, grass bush, weed trees and saplings not exc 30cm girth including roots and disposed off to a distance not exc 50m outside the site periphery complete all as specified and as directed by Engr-in-charge.

Material and labour for 75mm thick PCC 1:2:4 type D-2 (Using 40mm graded stone aggregate) as in sub base of flooring /hard standing complete all as specified and as directed by Engr-in-charge.

Material and labour for M-sand filling as a cushioning /bedding complete all as specified and as directed by Engr-in-charge.

Material and labour for machine pressed precast concrete interlocking paver block with pigment, rubber mould vax finished, any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade complete all as specified and as directed by Engr-in-charge.

Material and labour for providing PCC 1:2:4, Type B-1 (Using 20mm graded stone aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface in hard /dense soil complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC 1:3:6 type D-2 (Using 40mm graded stone aggregate) as in foundation, floor, filling and mass-concrete complete all as specified and as directed by Engr-in-charge.

Supply and fix for plates (plain or chequered) channels, square of Fe-290 (Gde E-165) cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed by Engr-in-charge.

Material and labour for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for 10mm thick rendering in CM 1:6 on cement concrete surface in even and fair finishing without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new plastered wall surface and applying three coats of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for precast cement concrete in cover slab type B-1, 1:2:4 (Using 20mm graded stone aggregate) 150mm thick for man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring for one light/ one fan controlled by one way switch with 1.5 sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including (medium grade) rigid non metallic PVC concealed conduit of suitable dia with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes, with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc., including cutting chases on wall, pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface and testing on completion complete all as specified and as directed by Engr-in-charge. Make for PVC conduit: SUDHAKAR / AVON PLAST /FINOLEX Make for Copper cable: Finolex/Polycab /Havells/ Plaza

All as per item No.127 here-in-before but for one three pin switch socket outlet, 5 Amp on independent board.

All as per item No.127 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 4 sqmm single core multi-stranded copper conductor cable (FRLS) along with one 4 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire.

All as per item No.127 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches.

Supply and fix for switch socket outlet 2 in 1, 5 pin, 5 Amp flush type complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader /Plaza

Supply and fix for switch socket outlet multipurpose 3 pin, 15 Amp and one 3 pin, 5 Amp controlled by one switch complete all as specified and as directed by Engr-in-charge. Make: Anchor/ Cona/ Leader/ Plaza

Supply and fix for switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader /Plaza

Supply and fix for fan regulator electronic deluxe rotary step type complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader /Plaza

Supply and fix for ceiling rose surface bakelite three terminals complete all as specified and as directed by Engr-in-charge. Make: Anchor /Cona /Leader /Plaza

Supply and fix for high efficiency wall mounted LED batten type not less than 18W 4 ft LED light fitting complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LDL-20-CDL /Philips /Surya Roshini Ltd /Wipro /Havells/ Luker Electric Technologies Ltd

Supply and fix for high efficiency wall mounted LED batten type not less than 9W 2 ft LED light fitting complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LDL-10-CDL /Philips /Surya Roshini Ltd/ Wipro/ Havells/ Luker Electric Technologies Ltd

Supply and fix for high efficiency 2x2 sqft LED light not less than 24 watts with panel for recesssed dust free installation with high brightness LEDs for glare free homogenous illumination complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LCTLSNE-24-FO-CDL / Philips /Surya Roshini Ltd/ Wipro/ Havells/ Luker Electric Technologies Ltd

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade of suitable dia complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed by Engr-in-charge. Make for PVC conduit: SUDHAKAR/ AVON PLAST/FINOLEX Make for Copper cable: Finolex /Polycab /Havells/ Plaza

Supply and fix for exhaust fan AC 230V, 50Hz, SP of size 300mm heavy duty along with standard accessories and louvers shutter complete all as specified and as directed by Engr-in-charge. Make: Crompton /Polar/ Orient/ Bajaj

Supply and fix for ceiling fan AC 230V, 50Hz, SP of size 1200mm sweep with down rod and standard accessories complete all as specified and as directed by Engr-in-charge. Make: Crompton (EMPOWER 50)/ Polar( Energy saving PS 47)/ Orient (Energy Star)/ Bajaj (Kassels 50)

Supply and fix for sheet metal enclosure for MCB, DBs, phosphatised, powder coated, Triple pole and neutral (TPN) 415 Volt, double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens/ Schneider /ABB

Supply and fix for MCB single pole 'C' curve 10kA breaking capacity of 6 to 32 Amps, 240 volts in proper position complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider/ ABB

Supply and fix for proper position MCB TPN of capacity 40 to 63 Amps, 415 Volts 'C' series with 10kA breaking capacity complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Supply and fix for energy saving LED street light luminaire fitting of not less than 25 Watt, IP65 powder coated pressure die cast aluminium housing with GI pipe medium grade 25mm dia 1.5m in length with suitable size MS clamps two nos made out of 25x3mm FI including two coats of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LSTS-20-CDL-M /Surya Roshini Ltd Cat Part No LE UL 25W IP66 (LXN) /Philips /Wipro /Havells/ Luker Electric Technologies Ltd Note: Contractor should submit warrenty certificate for 5 years for the luminaries from manufacturer.

Material and labour for earthing complete in positions with GI earth plate electrode of size 600x600x6mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level, with top edge of the earth plate at a depth of not less than 1.5m below ground connected to GI wire 4mm dia by means of GI bolts and nuts, check nuts, washers and GI wire protected by GI pipe light grade 15mm bore upto 7.5m and connecting to test point, LT switchgear etc., as per site requirement including necessary excavation, earth work in any type of soil PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover with 6mm dia MS bars 10 cm c/c on both ways as reinforcement all as shown in electrical plate No. 3 of MES schedule Part 1 complete all as specified and as directed by Engr-in-charge. Note: Quoted rate deemed to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil, site clearance etc.,

Supply and fix for high performance modern LED down light not less than 12 watts with panel for recesssed installation complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LCDEP-12-CDL /Surya Roshini Ltd Cat Part No. 12W Fusion Flexi/ Philips /Wipro/ Havells/ Luker Electric Technologies Ltd

Supply and fix for plug and socket SPN enclosure with a two pin and earth complete with one MCB single pole 'C' curve 10kA breaking capacity of 240 V, 32 Amp complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens /Schneider /ABB

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed multistranded FRLS copper conductor cable drawn into including PVC conduit on wall /roof /ceiling etc., and conduit of size not less than 20mm dia and provision of 1.5 sqmm single core PVC insulated unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover complete all as specified and as directed by Engr-in-charge. One light point controlled by one switch piano.

Supply and fix for high efficiency wall mounted LED batten type 20W LED light fitting complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No CTLN-20-CDL/ Philips /Surya Roshini Ltd /Wipro/ Havells/ Luker Electric Technologies Ltd

Supply and fix for MCB, DB SPN 4 way double door DB with 200 Amps rated copper bus bar in SS enclosure double door type complete all as specified and as directed by Engr-in-charge. Note: MCB SPN/ SP shall be measured and paid under the respective item of the schedule. Make: L&T/ Legrand/ Siemens/ Schneider/ ABB

Supply and fix for MCB SPN 32 Amps 240 volts 'C' series complete all as specified and as directed by Engr-in-charge. Make: L&T/ Legrand/ Siemens/ Schneider /ABB

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc., removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover for the following point wiring complete all as specified and as directed by Engr-in-charge.

One light point controlled by one switch

One fan point controlled by one switch

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 sqmm size

All as per item No.154 here-in-before but one 3 pin socket outlet 5/ 15 Amps, independent board with cables 4 sqmm size.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC concealed (fixed on wall /roof /ceiling etc.,) conduit of size not less than 20mm dia and including provision of 1.5 sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron/ pressed steel terminal boxes for mounting switches, sockets, fan regulator etc., with 3mm thick plastic laminated sheet cover complete for the following complete all as specified and as directed by Engr-in-charge.

One light point controlled by one switch

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 sqmm size.

One fan point/ exhaust fan point controlled by one switch

All as per item No.156 here-in-before but one 3 pin socket outlet 5/15 Amps, independent board with cables 4 sqmm size.

Material and labour for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface /concealed /PVC conduit of appropriate size 2x4 sqmm and 1x4 sqmm as earth wire complete all as specified and as directed by Engr-in-charge. Notes: (i) Cutting chases for concealed wiring shall be measured and paid seperately. (ii) Rates are including taking down old unserviceable.

Supply and fix for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-charge.

Supply and fix for high efficiency wall mounted LED batten type not less than 18W 4 ft LED light fitting and including taking down old unserviceable fittings complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LDL-20-CDL /Philips /Surya Roshini Ltd /Wipro/ Havells/ Luker Electric Technologies Ltd

Supply and fix for high efficiency modern 24 watts 2x2 sqft LED light with panel for recesssed dust free installation with high brightness LEDs for glare free homogenous illumination and suitable for ceilling cut out 600x600mm including taking down old fittings complete all as specified and as directed by Engr-in-charge. Make: Crompton Cat Part No. LCTLSNE-24-FO-CDL /Philips /Wipro /Surya Roshini Ltd/ Havells/ Luker Electric technologies Ltd

Material and labour for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring with two single core 1.5 sqmm (nominal cross sectional area) size multi stranded copper conductor cable using colour code as phase red and neutral as black and one single core 1.5 sqmm (nominal area) copper conductor connected to common earth duly 1100 volts grade FRLS insulated unsheathed cable in and including stove enamelled steel concealed conduit of not less then 20mm dia including tee bends, elbows etc., for one flame proof concealed conduit wiring light point controlled by one flame proof switch complete all as specified and as directed by Engr-in-charge.

One light point controlled by one switch

One fan/ exhaust fan point controlled by one switch

Supply and fix for switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed by Engr-in-charge. Make: Baliga/ Sudhir/ Shyam/ Crompton

Supply and fix for CIMFR certified LED flame proof batten suitable for single and twin T8 tube of 16W/ 20W recommended for gas with neccessary arrangements complete all as specified and as directed by Engr-in-charge. Note: Including taking down the existing unserviceable FTL fittings. Make: Crompton Cat Part No. EXTN2LT8-16/20 /Philips /Wipro /Bajaj

Supply and fix for high luminous efficiency LED tube (Pin type) not less than 18W 4 ft suitable for LED flame proof light fitting complete all as specified and as directed by Engr-in-charge. Make: Surya Roshini Ltd Cat Part No. SLE DS 18 P AL EXT 18W /Crompton /Philips /Havells /Wipro/ Luker Electric technologies Ltd

Supply and fix for flame proof aluminium frame industrial type exhaust fan 380mm size facility including cutting, finishing and neccesery arrangements etc., complete all as specified and as directed by Engr-in-charge.

Taking down ceiling fans from ceiling hook of any make and sweep by disconnecting complete for repairs complete all as specified and as directed by Engr-in-charge.

Hanging only ceiling fans after repairs to ceiling hook of any make and sweep by connecting with 3 core copper flexible round cable from ceiling rose to fan complete all as specified and as directed by Engr-in-charge. Note: Copper wire will be measured and paid separately as supply only under relevant items.

Material and labour for rewinding of burnt out fan motor with super enameled copper winding wire of suitable gauge /size including necessary tapping, varnishing etc., including taking down burnt copper winding and necessary transportation to workshop and back and testing complete all as specified and as directed by Engr-in-charge. Ceiling fan 1200/1400mm sweep

Material and labour for cutting opening, through brick walls for fixing exhaust fan (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering including making good in cement mortar for finishes etc., complete all as specified and as directed by Engr-in-charge.

Taking down and refixing of AC unit from exiting place to as required place and making good of existing surface with brick work ,plastering and painting for finishes etc., complete all as specified and as directed by Engr-in-charge.

Supply, install, testing and commissioning of servo controlled oil cooled voltage stabilizer of capacity 63 KVA for automatic operation, copper wound, three phase, 50Hz, naturally oil cooled, including first fill of new transformer oil upto appropriate level, indoor type with all standard accessories complete and designed for input variation between 300 V to 480 V with output voltage stabilized at 380 volt with accuracy ± 1% and speed of correction 8 Volts per second complete all as specified and as directed by Engr-in-charge. Make: Krykard/ Pure Volt/ Volina/ Schneider/ Instruments and Equipment Co

Material and labour for earthing complete in positions with GI earth plate electrode of size 600x600x6mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level, with top edge of the earth plate at a depth of not less than 1.5m below ground connected to GI earth strip 32x6mm by means of GI bolts and nuts, check nuts, washers and GI earth strip protected by GI pipe light grade 40mm bore upto 7.5m and connecting to stabiliser /DBs etc., as per site requirement including alternate layers of charcoal and salt crystal, necessary excavation, earth work in any type of soil PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover with 6mm dia MS bars 10 cm c/c on both ways as reinforcement complete including watering pipe 20mm dia medium grade with funnel complete with mesh all as shown in electrical plate No. 3 of MES schedule Part 1 complete including testing on completion complete all as specified and as directed by Engr-in-charge. Notes: (i) Quoted rate deemed to include necessary earth work, PCC chamber, RCC cover, reinforcement, removal of surplus soil, site clearance etc., (ii) GI earth strip 32x6mm, GI tubing light grade 40mm bore upto 7.5m deemed to be included in the rate quoted by the contractor. (iii) Beyond 7.5m the GI earth strip 32x6mm and GI pipe light grade 40mm bore shall be measured and paid under relevant item of the schedule. (iv) Quoted rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm. If the desired result is not obtained the earthing will be re-done by the contractor at no extra cost.

Supply and fix on pole /wall, buried in ground, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe earth continuity conductor GI strip 32x6mm complete all as specified and as directed by Engr-in-charge.

Material and labour for galvanized iron tubing 40mm bore light grade with all fitting laid on wall /floor for protection including providing fixing clamps, bolts and nuts of suitable size as required complete all as specified and as directed by Engr-in-charge. Make: TATA/ JINDAL/ Surya/ Prakash

Supply and fix for MCCB FP 415 volts 50 Hz 100 Amps with breaking capacity 25 KA adjustable thermal setting, thermal magnetic type including supply and fixing suitable MCCB enclosure, gland as required complete all as specified and as directed by Engr-in-charge. Make: Legrand/ Siemens/ ABB/ Schneider/L&T

Material and labour for sub main wiring with 4 single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 25 sqmm and two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 25 sqmm as in continuous earth wire drawn into and including rigid PVC conduit medium grade of suitable dia complete with fittings and fixings accessories complete all as specified and as directed by Engr-in-charge. Make for Copper cables: Finolex /Polycab /Havells/ Plaza Make of PVC Conduit: SUDHAKAR/ FINOLEX/ PRESTO PLAST/ AVON PLAST

Supply and fix for triple pole neutral and earth encolsure with a 5 Pin (three phase, neutral and earth) plug with socket complete including one TPN MCB 32 Amps 415V complete all as specified and as directed by Engr-in-charge. Make: Legrand/ Siemens/ ABB/ Schneider /L&T

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth; for trench of cable etc., and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-charge.

Removing of surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

Spreading riddled earth as obtained from item No.180 here-in-before for UG cable cushioning complete all as specified and as directed by Engr-in-charge. Note: if the required qty of riddled earth not obtained from above item the contractor should bring the same from other location shown (not beyond 50m) including necessary earthwork as directed for borrow pit /trench to obtain the required qty without any additional cost and the cost deemed to be included in the rate quoted by the contractor.

Supply and lay standard size common burnt clay bricks sub class 'B' for cable protection, laid dry complete all as specified and as directed by Engr-in-charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and as directed by Engr-in-charge. Make: Havells/ Polycab/ KEI/ CCI/ Universal

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for for 10 sqmm 2 core complete all as specified and as directed by Engr-in-charge. Make: Havells /Polycab /Universal /KEI/ CCI

Supply and fixing sheet metal enclosures for MCB, DBs, Phosphatised, powder coated, TPN 415 Volt, double door, suitable for four way with dim rail earth and neutral bar complete all as specified and as directed by Engr-in-charge.

Supply and fixing in proper position MCB TPN of capacity 40 to 63 Amps, 415 Volts 'C' series with 10 KA breaking capacity complete all as specified and as directed by Engr-in-charge.

Supply and spread reddil earth for UG cable cushioning including punning on top and bottom of the cable complete all as specified and as directed by Engr-in-charge.

Supply and fix for powder coated anodised aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for mortice lock, brass, 4 levers vertical type size 100mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for 12mm thick toughened glass with rounded edges and finshed to best quality as per design fixed as in doors complete all as specified and as directed by Engr-in-charge.

Supply and fix for powder coated anodized aluminium grill of 6x6mm bars size of opening 10cms size mesh with aluminium channel 'F' angle aluminium frame work complete all as specified and as directed by Engr-in-charge.

Supply and fix for 12mm thick prelaminated particle board, interior grade, prelaminated one side and decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work complete all as specified and as directed by Engr-in-charge.

Supply and fix for aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge.

Supply and fix for 100mm ling stainless steel barrel tower bolts complete all as specified and as directed by Engr-in-charge.

Supply and fix for stainless steel sliding door bolts with hasp and staple and fixing clips of sheet cast extruded section and fixing bolts and sliding bolts of extruded section 250mm long complete all as specified and as directed by Engr-in-charge.

Supply and fix for door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 51 to 80 kg and fixed etc., complete all as specified and as directed by Engr-in-charge.

Chair Revolving Executive type Make: Featherlite Model: Helix HB Drwg No: TP

Chair Visitors Make: Durian Model: Spark Drwg No: TP

Table Centre Drwg No: TP

Almirah Large Steel with shelves Drwg No: FD-1031

Book Case Steel Drwg No: FD-1028

Charpoy IP with Hard top Drwg No: FD/Map-II/01

Riffle Rack for 4 rofle size 30"x15"x36" (LxWxH) with wooden base Model No. RDS4 Drwg No: TP

Table Writing Drwg No: FD-275

Chair Writing Drwg No: FD-280

SUSII CONSTRUCTIONS

SREE BALAJI ENTERPRISES

diesel power services (a.p)

M.G.Swamy and Co.,

C SRINIVASAN

SIVA ENTERPRISES

R.P.TRADERS

muthu constructions