Supply, installation, testing commissioning of Interlink wire solar fencing system in PCDOs

Amount

Energizer confirming to BIS 302-2-76 Standard of safety with built in alarm: Input Voltage: 12V DC, Input Current: 500MA, Output Voltage: 6.0KV -10.0 KV, Pulse Interval: 1.20second, Pulse Duration: 0.3Milli Second, Output energy: 2.50 Joules.

Solar Panel post of 3.00 mtrs high , with PV module-100Wp with stand , housing box (Confirm to IP66 specification) equipped with solar panel M.N.R.E approved &12 volt 100 AH battery Solar Tubular type with charge controller (Exide, Sukom or equivalent), digital voltmeter, Cut out switch,Xenon flash, Neon tester, Hooter-118DB & lighting diverter system(electronic-V-shape) complete in all respect ..

Corner posts - GI hot dipped, 50 mm round Pipe (medium Class) of Indian Standard, Covered from Top (Top Cap) with two angle for anchorage (at bottom) of ISA 35 x 35 x 5 mm 6 inches each., 2.80m Length with PP Insulator riveting. Including Gates (complete frame)

Support Posts - GI hot dipped, Round Pipe-32mm Diameter (medium Class) of Indian Standard, with two angle for anchorage (at bottom) of ISA 35 x 35 x 5 mm 6 inches each. 2.80m length with PP Insulator riveting. Must include brackets & fasteners for necessary connections complete in all respect.Two on cornet posts , or as required for lateral supports.

Intermediate posts - GI hot dipped, 40 mm round Pipe (medium Class) of Indian Standard, Covered from Top (Top Cap) with two angle for anchorage (at bottom) of ISA 35 x 35 x 5 mm 6 inches each. , 2.5m Length with PP Insulator riveting.

Posts must be grouted in P.C.C. in 1:2:4 cement sand & stone ballast. 20mm nominal size of aggregates. 1).For corner Posts 0.45*0.45*0.70 size 2). For Intermediate posts & Support posts 0.45*0.45*0.45mm

Providing High tensile(HT) wire- ACSR Conductor wire, ISI marked, Coated with Zinc+ Aluminium, 2.59 mm (12 gauge), TATA / Equivalent reputed make-04 Nos through each post supported through Polypropylene(PP) insulators on each post.

PP Reel Insulator (UV Stabilized) with riviting 6 for every post

Permanent Wire Tightners- Galvanized made up of special alloy, non-rusting (Round Shape) with springs 12 @ 21m interval + Gates and as required as per site.

Joint clamps

Warning sign Boards at every 50 mtrs

Strain Insulator

Earthing System-3 for each panel & one at every 200m

Lead Out Cable-Dubble insulatered with standing 15KV voltage, 2.00mm core diameter .12G hot dip galvanized wire with 9 mm thick insulation.

Interlink Chain (Galvanized Steel Chain Link Fence Fabric ) as per IS 2721-2003 Galvanising heavy coated Zinc as per IS 3/6/2010 4826 or IS:12753 in following size for frencing purposed only 100mm (+/- 5mm) mesh with nominal wire dia.4 mm duly ISI marked including carriage of materials within all leads and lifts.

Tool kits, storage, Local Transportation, testing & commissioning cost

Installation charges