Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.9 LAccepted-AOC NO 26 SRI GANESH 7TH CROSS BDS NAGAR DIBBUR RAMAIAH LAYOUT K NARAYANPURA MAIN ROAD BANGALORE 560 077 | BENGALURU URBAN | KARNATAKA | 560077 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹46.4 L+₹90,566.50 (1.99%)Rejected-Finance 21 9TH MAIN 4TH CROSS GOWDAKEHOLA BAGALAKUNTE NAGASANDRA POST BANGALORE 560073 | BENGALURU URBAN | KARNATAKA | 560073 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹46.8 L+₹1.2 L (2.69%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
29 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
CERTAIN MISC PETTY REPAIRS OF DAY TO DAY COMPLAINTS TO VARIOUS ACCNS UNDER AT AFTC 2 DC AREA AND CQAE WE AREA UNDER GE M AF JALAHALLI
2024_MES_647743_2
8890/E8
Open Tender
Civil Works
Item Rate
181 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT JALAHALLI PUBLIC FUND ACCOUNT
₹1 L
27 Jun 2024
8 May 2024
5 Jun 2024
8 May 2024
29 May 2024
15 May 2024
8 May 2024 - 11 May 2024
Amount
Petty repair to door shutters for easy closing/opening (size upto 3 Sqm) including minor repair and easing, adjustment/alignment to openable with assessories and included taking down and refixing, tightening of hinges or changing the position of hinges,welding of hinges door to frame adjustment of tower bolts, sliding bolts with new screws etc, complete all as specified and directed by Engineer-in-Charge.
Petty repair to easing of wooden window, wooden ventilator, cupboard door, wardrobe door, PVC door, window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments , (size upto 3 Sqm). minor repair and easying and adjustment/alignment to openable with assessories and including taking down and refixing, complete all as specified & directed.
Providing and injecting chemical for post constructional Anti TermiteTreatment at points of contact of wood work and wall surface by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling external holes etc in apron and sealing the same, complete all as specified & directed.
Taking down and re-fixing the same existing Aluminium door/window/partitions (each shutter area n. exc 5 Sqm) after carrying out certain repairs as required, removing the existing beading and fixing new (i.e. including change of Handles, hinges, star lock, rubber beadings, bottom bearing, clips etc) rubber beading of suitable size with adhesive, overhauling of floor springs including repairing/cleaning/greasing etc and make the same fully functional, complete all as specified & directed.
Taking down the existing locking system, contains any number of levers repalcing the strucked/damaged levers, applying oil to all parts and making functional properly and refixed in position, complete all as specified & directed.
Petty repairs to MS windows n. exc 3 Sqm, taking down and refixing the same of window glass, hacking out old putty or removing beads etc, and reputtying all glass and painting/oiling puttied surface to match existing work and including taking down and refixing the same position complete all as directed. Note:-(i) The unit quoted rate shall be inclusive of material,any helght of any size and all labours, tools and plants including scaffolding, safety helmet, rope required for working upto approx 15 mtr height from natural ground level and nothing extra shall be admissible on this account.
M&L 25mm dia mild steel powder coated drapery rod cut to length required without joint in between and fixed at openings including taking down existing one, complete as specified & directed by Engr-in-charge.
Supply and Fixing in repairs Mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapaery rod, complete all as specified & directed.
S&F 6mm thick frame less bevelled edge mirror fixed with steel stud as per direction of Engineeer-in-charge including taking down old one, complete all as specified & directed.
S&F 300mm of arc size, 5mm thick corner glass shelf with stainless steel brackets, stainless steel railing in bathroom and fixed to wall with brackets including removing the existing fitting as per manufacturer's instructions and as required at site, complete all as specified and as directed
M&L 18/19mm thick Prelaminated particle board, interior Grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work including taking down, complete all as specified and as directed.
M&L 6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails, complete including taking down, all as specified and as directed.
S&F Continuous (piano) hinges, stainless steel bright finish or electrogalvanised of 40mm width of flaps (when open) complete including taking down, complete all as specified and as directed.
S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including taking down, complete all as specified and directed.
S&F Plate rack of size 65 cm x 96 cm made of stainless steel fixed in repairs, complete all as specified & directed by Engr-in-charge.
S&F in repair looking mirror 3 mm thick of size 600mm x 450mm on commerical ply wood 6mm thick with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass, screws and cup, washers, aluminium frame and fixed, complete all as specified and directed.
S&F PVC body cabinet box mirror of size 350mm X 450mm X 100mm PTMT alloy of approved pattern and design including taking down existing one, complete all as specified & directed by Engr-in-charge.
Supply and fixing in repair aluminium anodized hasp and staples safety type with mild steel hinge pin incl bolt to hinge plate fixed with screws of 100mm length, complete all as specified and as directed.
Supply & fixed in repair of 12 mm thick ,7 ply, plywood ,grade BWR ,type BB fixed to wooden frame work in wall with nails including taking down ild one, complete all as specified & directed.
S&F Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved including taking down existing one, complete all as specified and as directed.
Complete removal of existing water proofing treatment of any description and in any position including PCC padding, roof tiles any thickness and cleaning, wire brushing, watering & removal of debris outside MOD, complete all as specified & directed by Engr-in-Charge. NOTE :- Unit rate quoted shall also include for diconnecting and setting side of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work.
M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified & directed.
Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dusts etc, complete all as specified & directed.
M&L for brushing neat cement slurry with 3kg/sqm, complete all as specified & directed.
M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement, complete all as specified and as directed.
M & L for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC @ 3% by weight of total cement, complete all as specified and directed NOTE :- Integral WPC shall be measured and paid separately.
Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface, complete all as specified & directed.
M&L APP polymeric membrane min weight 3.0kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm laid on primed surfaces by torch application method, complete all as specified and directed
M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm of membrane surfaces, complete all as specified and directed
Supply only water proofing compound of approved make (ISI MARKED), complete all as specified & directed.
Taking down and refixing MS window shutters n. exe 1.5 Sqm through cutting of existing any type of hinges, handle and tower bolt and fixing new box type hinges, MS handle and MS tower bolt the same window by necessary welding. The quoted rates shall be included the following aspect:- (a) Cutting of existing piano hinges, handle and tower bolt from window frame and shutter. (b) Fixing of removed shutter in the same frame on MS box type hinges 100mm, MS handle 100mm and MS tower bolt 100mm by welding. (c) Easing and adjusting the shutter before re-fixing if required. (d) Finishing the window frame and shutter with two coat of sythetic enamel paint. (e) Necessary scaffolding material to be included as the building height is more than 10mtr. Note : Box type hinges, handle and tower bolt shall be measured and paid separately as supply only and labour element is deemed to be included in this item.
Supply only MS Box type hinges of size 50mm, complete all as specified & directed.
Supply only MS Handle of size100mm, complete all as specified & directed.
Supply only MS tower bolt of size 75mm, complete all as specified & directed.
S&F in repairs Stainless steel peg set of having 5 pegs powder coated fixed to wall surface with pvc plug and screw including taking down, complete all as specified & directed.
Supply and fixing in repair steel window handles with nuts and bolts or with screws including welding/fixing with nuts, complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair steel window peg stay, complete all as specified & directed by Engr-in-charge.
Supply and fixing in repair steel window hinges as per sample by welding, complete all as specified & directed by Engr-in-charge.
Taking down chowkat or frame (wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame), complete all as specified & directed.
Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each, complete all as specified and directed.
Cutting holes in stone wall exc half brick and n.exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete using 20mm graded aggregate as required complete all as specified and as directed.
S&F MS work (flat iron) 25mm x 3mm thick) in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165, complete all as specified & directed.
M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
Supply and Fixing 30 mm thick factory made flush door shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed.
S&F 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified & directed.
S&F Factory made 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed.
Preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete, all as specified and as directed.
Supply and fixing 200 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.
S&F aluminium handles cast type anodised 200 mm long, complete all as specified and as directed.
S&F 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminium alloy and fixed, complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or wire staples complete all as specified and directed.
Petty repair to toilet floor, bathroom, kitchen, etc seepage including sunken portion treatment with apply water proofing compound including repair and arrest the leakage to floor trap,nahani trap , grating and applying white cement etc making good to the damaged portion of flooring, laying and matching of existing flooring, complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repairs 200 mm long aluminum anodized barrel tower bolt extruded section, complete all as specified and as directed.
Supply and fixing in repairs 150 mm long aluminium anodized barrel tower bolt extruded section, complete all as specified and as directed.
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, fixed in repair to wooden frame/welded to metal frame, complete all as specified and as directed.
Supply and fixing in repairs butt hinges 75 mm long medium weight cold rolled stainless steel, complete all as specified and as directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one , complete all as specified & directed.
Supply and fixing in repairs aluminium handles cast type anodised 200 mm long, complete all as specified & directed.
Supply and fixing in repairs aluminium handles cast type anodised 150 mm long, complete all as specified & directed.
Supply and Fixing in repairs 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminium alloy and fixed, complete all as specified and as directed.
S&F in repairs 250mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm, including taking down existing one complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty including taking down existing wire cloth all as specified and directed.
S&F Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed including taking down existing one, complete all as specified and as directed by Engr-in-charge.
S&F 5mm thick rubber beading strips for entrance doors having width exc 3cm to not exc 5cm to arrest entry of insects including taking down existing one complete all as specified and as directed
Applying silicon sealent on joints of wall,cill jambs roof etc, complete all as specified as directed
M&L Checking of joinery (wooden/steel) iron/ aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/ nails, plug etc to make it functional, complete all as specified and as directed by Engineer-in-Charge. Note :- In case any replacement of new handles, Butt hinges, cupboard knobs, floor door stopper and pelmet box the same shall be measured and paid as supply only seperately. However, the unit rate is deemed to be included for labour element.
Supply only wooden pelmet boxes/curtain rods in position by using rawl plugs/wooden gutties fixed with MS holder clips incl tightening of screws etc in all respect length of each pelmet n exc 2.50 mtr long, complete all as specified and directed.
Supply only 200mm long extruded aluminium alloy handles , fabricated type, anodised, complete all as specified and directed.
Supply only aluminium handles cast type anodised 150 mm long,complete all as specified and directed.
M&L Preparation of old concrete/Asbestos/GI Sheet/Cement/Plaster surfaces brooming down or steel wire brushing down and applying one coat of synthetic enamel paint, complete all as specified and as directed.
Supply only 100mm long Butt hinges medium weight cold rolled stainless steel, complete all as specified and directed.
Supply only 40 mm dia cupboard knobs brass polished, complete all as specified and directed.
S&F in repair Stainless Steel Door Magic Eye with Flap to wooden doors , unique design any type, complete all as specified and directed
Supply and fixing in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,including rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fixing in repairs powder coated aluminium for shutters of window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, star lock, included rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm including taking down existing one, completed all as specified and as directed.
S&F Plain fillets, square, rectangular or triangular in section, clean sawn, se-cured with nails or brads in section area 6 sq.cm but not exc 13 sq cm including taking down exisiting one, complete all as specified and as directed.
Taking down chowkat or frame (wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame), complete all as specified and as directed.
S&F in Steel windows with side hung shutters including projecting type hinges, frame with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty, complete in square n exc 0.50sqm each, complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tubecomplete all as specified .
S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and directed.
S&F Butt hinges 75 mm long medium weight cold rolled stainless steel, complete all as specified and as directed.
Supply and fixing 150 mm long aluminium anodized barrel tower bolt extruded section, complete all as specified and as directed.
Supply and fixing aluminium handles cast type anodized 150 mm long, complete all as specified and as directed.
Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4), complete all as specified directed.
Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and Material and labour for Glazed ceramic coloured tiles 350x250mm/ 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as skirting/ dado including 10mm thick 1:3 backing coat, complete all as specified and directed.
S & F in repair rubber beading suitable for fixing 4 mm/5mm thick glass in aluminium window/doors. Etc, complete all as specified and directed.
S&F in repair star lock for window incl all necessary fittings, complete all as specified and as directed.
S&F in repair aluminium windows bearing per windows, complete all as specified and as directed.
S&F in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed), complete all as specified and as directed.
Supply and fixing in repairs 20mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe complete all as specified and directed.
Material and labour for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint, complete all as specified and as directed.
Material and labour for Preparation of old decorated plastered or unplastered surface of wall, chajja, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash, complete all as specified and directed.
S&F Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe ) including provision of lime concrete bedding fixed in repairs, complete all as specified and as directed.
S & F in repairs Bib taps cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed for 15 mm bore, complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one, complete all as specified and as directed.
S&F Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, (Make: Parryware /Hindware/Cera) including taking down existing one, complete as specified and directed by Engr-in-charge.
S&F in repairs Glass shelf assembly of 12mm thick and n exc 60cm length, 15cm wide with stainless steel brackets, stainless steel railing in bathroom and fixed to wall with brackets complete all as specified and as directed (Make : Parryware /Cera/Hindware)
Supply and fixing in repairs plastic water closet seat cover white or tinted, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinge device and including taking down existing one, complete as specified directed by Engr-in-charge. Make: Parryware/Hindware/Cera
S&F Towel Ring round including taking down existing one, complete as directed by Engr-in-charge. Make:Hindware / Parryware/Cera)
S&F in repairs cast copper alloy chromium plated 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore (Make:Hindware / Parryware/Cera) complete all as specified and as directed by Engineer-in-Charge
S&F Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick having Zinc aluminium alloy coating double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws and including dismantling of any type of old sheets in roof coverings, complete all as specified & directed.
S&F cast copper alloy chromium plated Concealed stop cock, Regular body with adjustable wall flange screwed down screwed for iron pipe 15mm bore (Make:Hindware / Parryware/Cera). including takig down existing one complete all as specified and as directed by Engineer-in-Charge
S&F cast copper alloy chromium plated sink cock with swinging casted round shape spout screwed down screwed for iron pipe in repairs 15mm bore including taking down existing one, complete all as specified and as directed.
S&F in repair cast copper alloy Chromium plated soap dish including fixing arrangement, complete all as specified and directed . (Make: Parryware /Hindware/Cera)
S&F in repairs Overhead Shower rose ø125mm, complete all as specified and as directed.
S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe. (Make: /Parryware/Hindware/ Cera) including taking down existing one, complete as specified directed by Engr-in-charge.
S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe, complete all as specified and directed .
S&F in repair PVC Dual flush ceramic colour cistern , low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipe and handle, making proper fixing and hanging arrangements (Make: /Parryware/Hindware/ Cera), complete all as specified and as directed.
S&F in repairs of chromium plated tubular towel rail 20 mm dia brass D type 60 cm long between flanges, complete all as specified and as directed.
Petty repairs and refixing the existing Wash hand basin and Sinks made of stainless steel 1mm thick kitchen flat back including fixing cantilever CI/Angle iron brackets embedded in concrete block including connecting waste coupling 32mm bore, including bedding, waste fitting, waste pipe in cement mortar on dwarf wall and connecting union to pipe, filling gap in white cement and all neccessary fittings to fixed in repair (including taking down and refixing in the same position) complete all as specified and directed.
S&F Wash hand basin vitreous china (flat back and angle back type) of size 580x400mm including taps, waste chain and plug and porceline stopper, brackets including cutting for and pinning in ends of brackets or erecting stand with waste pipe ,fixed including taking down existing one, complete all as specified as directed by Engr-in-charge.
S&F Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank ov any description,complete all as specified and directed.
S & F in repair Toilet paper holder box type of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.
S&F in repairs of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) complete all as specified and directed by Engineer in Charge.
S&F in repairs of Stop Valve standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed by Engineer in Charge. .
S&F in repairs of Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) complete all as specified and directed by Engineer in Charge.
S&F in repairs 150 mm dia round/square grating of CP with or without hole including Jointed to PVC pipe, complete all as specified and directed.
S&F 32 mm dia Waste Coupling fittings, of brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including taking down existing one, complete all as specified and directed by Engineer- In - charge
S&F PVC connections 15mm size with PTMT nuts of length 600 mm including taking down existing one complete all as manufactures and all as specified and directed by Engineer- In - charge.
M&L Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, PVC horinzontal pipe embeded in floor in bathroom or kitchen making good to the damaged portion of flooring, laying and matching of tiles in the existing flooring, complete all as specified and directed by Engineer-in-Charge
M&L Repair of leakage/seepage from the wall/ door bend /door tee/ 'Y' junction/ 'T' Junction of soil pipe / waste pipe/ vent pipe of kitchen/ bathroom/WC of the upper Qtr or at the ground floor Qtr including change of any damaged soil waste pipes or fittings of any shape, specifications and size, making good to the damaged portion of wall with brick work in cement mortar 1:6 or cement concrete 1:2:4 and plastering to wall in CM 1:4 and finished the surfaces matching to existing wall complete to avoid the leakage/ seepage at the site of work complete all as specified and directed.
Note for item No 124&125 :- (a) Find out main cause of leakage and take necessary steps to resolve / rectify. (b) Replace existing tiles in case leakage through NT/FT. (c) The rate also include provision of new NT/FT. (d) The unit rate is also deemed to be included for reqd bonding chemicals to arrest the leakage/seepage as directed by the manufacturer's specification. Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit
S&F Vitreous china wash down water closet pan (pedestal pattern), white (exluding fixing bolts,flushing cistren and flushpipe) and including seat cover for pedestal pattern fixed in repair, complete all as specified and as directed.
M&L for Preparation of old decorated surfaces of walls by using pressure washer, remove all dirt & dust ,applying one coat of wall care putty and then applying two coats of premium oil bound distemper over one coat of primer as per manufacture instruction of required shade, complete all as specified and directed by Engineer - in - Charge. Note:-(i) Cost of scaffolding required is deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.
M&L for Preparation of old painted wooden surface of any description and applying one coats of synthetic enamel paint using mechanical means, not otherwise described over 10 cm width or girth, complete all as specified and directed.
S&F Rotational moulded polythene water storage tank of 500 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank of any description,complete all as specified and directed.
S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kgf/Sqcm fixed to walls, ceiling or laid in floors, complete all as specified and directed.
S & F in repair PVC waste pipe 32 to 40 mm dia and length n exc 1m for WHB/Sink/Urinal up to floor trap and fixed, complete all as specified and directed.
Taking down steel tubing 20mm bore and connections including cleaning and refixing of old GI tubing 20mm bore including connections in new or old position (wall, ceiling & floor) complete all as specified and as directed. Note :- The unit rate quoted is deemed to include for all fittings required for re-connection.
Taking down steel tubing 15mm bore and connections including cleaning and refixing of old GI tubing 15mm bore including connections in new or old position (wall, ceiling & floor).complete all as specified and directed. Note :- The unit rate is included for all to be fittings for re-connection.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed to wall/floor including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F PVC bends 110mm bore including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) 110mm junction (single T) equal or unequal provided with access door including taking down existing one, complete all as specified and as directed.
S&F PVC (SWR) 110mm junction vent cowl including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) pipes single socket in any length with rubber ring joints of 75 mm bore fixed to wall including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) branch piece (single Y) 75mm equal or unequal provided with access door including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F PVC bends 75mm bore including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F PVC (SWR) 75mm junction (single T) equal or unequal provided with access door including taking down existing one, complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement, complete all as specified and as directed.
S&F PVC (SWR) 75 mm junction vent cowl including taking down existing one, complete all as specified and as directed by Engineer-in-Charge
S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore, complete all as specified and directed.
S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore, complete all as specified and directed.
Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and taking out steel/plastic/cpvc water tubing and connections including cleaning for refixing 15 mm/20mm dia,complete all as specified and directed.
Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and taking out steel/plastic/cpvc water tubing and connections including cleaning for refixing 25mm dia,complete all as specified and directed.
Supplying and fixing in repairs of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC, complete all as specified.and directed.
Supplying and fixing in repairs of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC, complete all as specified and directed.
Supplying and fixing in repairs 20mm outer dia CPVC brass elbow, complete all as specified and directed.
Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down 15mm bore steel tubing galvanized complete all as specified and directed.
Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down 20mm bore steel tubing galvanized complete all as specified and directed.
M&L Petty repairs to leaking water in bib taps, pillar cock, stop cock, angle valve, concealed stop valve, bottle trap of any description by changing the PVC washers/ Sheet washers,spindle brass, jumper brass or any other minor accessories items etc (incl taking down and refixing), complete all as specified and directed
M&L for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat oil bound distemper, complete all as specified and as directed.
Petty repair to wall mixer,basin mixer,sink mixer etc including replacement of spindle brass, Jumper brass, rubber washer, head incl taking down and refixing, complete all as specified and directed.
S&F Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs, complete all as specified and directed. Make : M/s Diamond / Nirali / Amco / TATA.
S&F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen Including taking down the existing one, complete all as specified and directed. (Make : BIR SS /Sleek/Blum/Hettich)
S&F Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen Including taking down the existing one, complete all as specified and directed. (Make : Spykar /Sleek/Blum/Hettich)
S&F Stainless steel plain basket of size 530 x 505 x 100mm including taking down the existing one, complete all as specified and directed. Make : Butterfly /Nova Sleek/DWD GRASS
S&F Stainless steel thali basket of size 600x 500x 100mm including taking down the existing one, complete all as specified and directed. Make : Butterfly /Nova Sleek/DWD GRASS
S&F Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved. including taking down existing one, complete all as specified and directed. all as specified and as directed by Engneer-in-Charge
S&F Stainless steel bottle basket of size 200x 508x 431mm including taking down existing one, complete all as specified and directed. Make : Butterfly /Nova Sleek/DWD GRASS
S&F Stainless steel cutlery basket of size 530 x 505 x 100 mm Including taking down the existing one, complete all as specified and directed. Make : Butterfly /Nova Sleek/DWD GRASS
S&F Stainless steel telescopic slider of 500 mm of approved pattern and make suitable for drawer in base unit of modular kitchen including taking down the existing one, complete all as specified and directed
Taking down & re fixing high or low level flushing cistren 10 ltrs capacity & connections to pipes & fixing of chain & pull or lever after cleaning inside of all dirt, scale formation, replacement of rubber washers, syphon set, float valve, handle,fixing to wall clamp/bracket, stopping of leakage etc wherever required, complete all as specified and as directed
Petty repair to internal/external water inlet pipe line/concealed line coming from over head tank to the quarter including socket,elbow,nipple ,with repair to water blockage , pipe line leakage, cleaning internally , removing the blockage including concealed water tubing etc of any height using scaffolding and making the water supply functional, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description, complete all as specified and directed.
Supply and fixing MS tubes/Square bars/Angle square bar, Flat iron using various sections such as poles, rafters, purlins ladders and cleats as directed by Engineer-in-Charge and all specified.
M&L Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces, complete all as specified and as directed.
Supply and fixing in repairs 7 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit .
M&L for Grinding of existing mozaic/kota stone/tiles in wall/flooring including mirror polishing, cleaning and joints filling and apply white cement complete all as specified and directed by Engineer-in-Charge.
M&L for vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6, including dismantling of existing tiles and disposal to outside MD land complete all as specified and as directed.
M&L for vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6 including dismantling of existing tiles and disposal to outside MD land, complete all as specified and as directed.
M&L in repairs pre-cast PCC 1:3:6 type C1 (using 20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 including demolition of old brick work / stone masonry/PCC block masonry built in cement mortar of any description complete as specified and directed.
M&L Rendering 15 mm thick in two coats on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement, complete all as specified and directed. Note: Supply only water proofing compound shall be measured and paid seperately.
M&L Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional, complete all as specified and as directed by Engineer-in-Charge. The rates for plastering / plinth include for: - (a) Preparing the surfaces. (b) Thickness of plaster/plinth key in joints, etc as per existing. (c) Finishes, chamfers of any width, internal rounded angles upto 80mm in width or girth external rounded angles upto 80mm in width or girth. (d) All materials, labour and equipment & supply of integral waterproofing compound, (e) Scoring surface of plastering for key, where the surface is not required to be finished fair. (f) Plastering in patches (in repairs), exc 3 sq.m each patch, for preparing old walls to receive plastering'. Nothing extra shall be admissible for matching with existing work etc. (g) Any individual patch (other than nail hole, plug hole, etc.) are included for provided existing surface finish .
Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises and leaving the work clear of any plastering and material and labour for Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement, complete all as specified and directed. Note :- (a) Water proofing compound shall be measured and paid seperately. (b) The unit rate quoted is deemed to include for removal of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land.
Supply only water proofing compound of approved make (ISI MARKED), complete all as specified & directed.
M&L preparation of newly plastered surfaces wall/ ceiling and applying three coats of white washing on ceiling/ walls surfaces, complete all as specified and directed.
M&L applying two coat of cement based paint over a coat of primer, including preparation of newly plastered wall surfaces of any description, complete all as specified and as directed.
M&L for Preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paint, complete all as specified and as directed. Note:-(i) Cost of scaffolding required is deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.
M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint using mechanical means over 10 cm width or girth, not other wise described, complete all as specified and as directed.
M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane, complete all as specified and directed.
M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass exc 0.5 sqm each pane, complete all as specified and directed.
Material and labour for Preparation of old plastered or unplastered surface of ceiling brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of white wash, complete all as specified and directed.
M&L 75 mm thick Plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate), as in plinth courses, top surface of concrete finished even and smooth with out using extra cement, including expansion joint 10mm thick filled with mastic filling comprising of 01 part of heated blown bitumen and 3 parts of sand including demolition of existing cement concrete including disposal of demolition material upto MD land, complete all as specified and directed by Engineer- In - charge
M&L for Granite slab 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4), complete all as specified and as directed. Note : (a) The Unit rate quoted is included for Demolition of existing old Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar (b) The manufacturer's test certificate and individual test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
Dismantling the existing unservicible gully trap including chamber and material and labour for provision of new salt glazed stoneware gully trap, square or round mouth type "P" of size 180X150mm, including setting and jointing in cement mortar 1:1 in chamber with plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4, rendering in cement mortar 1:4, all around finished even and fair using extra cement, Precast cover slab in RCC 1:2:4 type B1 using 20mm graded stone aggregates, reinforcement with 6mm dia in both ways etc, including provision of handle etc complete all as specified and as directed.
Cleaning of service tanks of capacity as mentioned below on roof top of bldgs upto three storey after disconnection from inlet and outlet pipe, removing of float valve of service tank and keep aside safely for reuse drain out water through drain plug, cleaning thoroughly to remove all scales and dirt by brushing internal surface, cleaning properly inside with soda wash, flushing out with fresh water, re-positioning of tank at same place, re-connecting inlet and outlet pipes, closing of drain plug, re-installation of float valve duly cleaned, writing/ labelling the record of cleaning carried out with white bold letter such as "TANK CLEANED ON"--------- (month and year), including removing creepers, vegitation and roots of plants, trees branches on or surrounding of service tank complete all as directed by Engr-in-Charge:- Note:-(i) Unit rate quoted is deemed to be included for testing of water supply in tank both inlet and outlet flow during next supply hours early in the morning or late in evening. (ii) Contractor shall maintain a pucca bound register for cleaning carried out with date and obtain users signature and remarks if any and this register to be submitted alongwith RAR. (iii) Contractor is liable to rectify any damages to the external finishes of the bldg occured during the cleaning process, i.e. scrubbing and touch up with external paints as existing specifications. Unit rate quoted is deemed too be included the cost of the same. (iv) All sort of petty T&P items such as ladder, safety equipment, nuts, bolts, washers etc. required to accomplish the job shall be provided by the contractor with out any extra cost to dept.
RCC /PVC water tank exceeding 200 litters and not exceeding 500 ltrs capacity.
RCC /PVC water tank exceeding 500 litters and not exceeding 1000 ltrs capacity.
S & F in repair PVC covers of PVC water tank suitable for n exc 1000 ltr capacity including all necessary fixing arrangement, complete all as specified and directed.
M&L Repair to ends of chajjas/ parapets by removing old concrete, loose material & cleaning of reinforcement and finishing the surface with rich cement mortar 1:3 , finished fair & even and making good with existing finishes, complete all as specified and as directed. Note: Rate quoted by the tenderer shall be deemed to inclusive of double steel scaffolding.
Removing plant/Uprooting of vegetation growth including roots on wall/roof/parapet near pipes etc and applying acid treatment after removing roots for preventing regrowth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface, complete all as specified and directed. Note :- An amount of Rs 64280.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.
SRI MAHALAKSHMI CONSTRUCTIONS
raashi constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .