weld mesh

High Security Weld Mesh Panels of Size of 12.7 X 76.2 mm along Mesh and Panel size and Weight 2600X800mm 20.52 Kg as per tech spec

Weld Mesh Panels of size Mesh Wire Horizontal wire Dia 5.0 mm Vertical wire Dia 4.5 mm Mesh Size 50 x 100 mm Panel size and Weight 2600X800 9.3 Kg as per tech spec

Bravo Fence Weld Mesh Panels size and weight 2600X1000mm 11.02 Kg as per technical specification att

Punched Tape Concertina Coil 850 mm Dia 18 loops 3.5 mm core and Weight 6.7 Kgs as per technical specification

Punched Tape Baby Concertina Coil including spike and handle with 56 turns and dia 610 mm as per technical specification

Fence Post Type Circular Hollow section Dimensions 89mm Dia 3 mm as per IS specn IS 1239 Length 3.4 mtrs Weight 21.6 Kg as per tech spec

Truss support Post with Rail end Cap by using M8X100 Nut and Bolt Mechanism length and weight 1800mm

Weight 9.65 Kg as per tech spec

Truss support Post with Rail end Cap by using M8X100 Nut and Bolt Mechanism Length and Weight 3100mm and 16.6 Kg as tech spec

Straining Y-Arm for supporting top PTCC top Length of 1 Arm is 510 mm outer dia of 76 mm as per tech spec

Intermediate Y Arm for supporting top PTCC Length of 1 Arm is 510 MM as per tech spec

Razor Running tape Blade profile Tear Blade Core wire 2.5 mm wire Dia Length of each Coil 95 Mtrs Weight of each coil 9.2 Kg as per tech spec

Accessories for fitting panel Omega Clamp 89 mm Dia 35mm Width 3mm Thick as per tech spec

Accessories for fitting Truss Support Post Brace Band 89 mm 41mm Width 4mm Thick material MS with hot dip galvanized to 350 GSM as per tech spec

Mushroom Head Bolt with breakable head safety nut M8X120 as per tech spec

Eye Bolt with Loop nut M8X100 Material SS 304 as per tech spec

Anchor Rod 10mm Dia 300mm long GI Rod tie with fence post at bottom using tie wire as per tech spec

Tie Wire 1.4mm dia 100mm length Wire IS 280 2006 MS Material as per tech spec

Flat clamps for panel connection Flat 25x3 160mm long 2-slots as per tech spec

SS 304 Mushroom head bolt M8X25 Sheet Metal IS 1730 IS 8535 -1987 as per tech spec

Hog ring As per drawing To secure PTC coil to PTC coil and also PTC coil to panels Wire Dia 3mm shape and size as per drawing and tech spec

Punched Tape Concertina coil 1050 mm Dia 18 loops 3.5 mm core wire and weight 8.2 Kg as per tech spec

Fence Post as per IS specn IS1239 Length 2.8mtrs Weight 15.02 Kg as per tech spec

Across Fence Post Clamp 76 mm Dia 35mm Width 3mm Thick material MS with hot dip galvanized to 350 GSM as per tech spec

Mushroom Head bolt with breakable head nut M8X50 as per tech spec

PTCC Rod 10 mm dia 2.64 Mtr long MS Rod Suitable arrangement be made on fence postfor holding of PTCC rod as per tech spec

PTCC Rod 12 mm dia 2.64 Mtr long MS Rod Suitable arrangement be made on fence postfor holding of PTCC rod Material MS with hot dip galvanized to 350 GSM as peer tech spec

Post Cap as per tech spec attaached

Brace Band76 mm 41mm Width 4mm Thick material MS with hot dip galvanized to 350 GSM as per tech spec

Rail end Cap as per tech spec attached Bid Details 2/75

High Security Weld Mesh Panels as per below spec. Mesh Wire : Horizontal wire

Dia 4.0 mm (+/- 0.05mm) : Vertical wire

Dia 4.0 mm (+/-0.05mm) Mesh Size: Mesh Size of 12.7 X 76.2 mm along Mesh ( Mesh Wire: IS 280 2006). Panel size &Weight : 2600X800mm : 20.52 Kg

Coating : Zinc coated 40-50GSM &60 to 80 microns of Powder coating Color: RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength: Min 550 N/Sq.mm. Weld tensile strength: Min 70 % of Wire tensile strength. Note: High Security Weldmesh is been installed at the bottom.. Ref Drawing No :NC/LC/A8/V2.2. Material: MS Mesh Wire: Dia:4mm: IS 280 2006 Coating :IS 4826 – 1979 Weld Mesh as per : EN 10223-7

Punched Tape Concertina Coil : 850 mm Dia/18 loops/3.5 mm core wire. Coil Diameter : 850 mm (+/- 50mm). Blade Profile : Tear Blade Profile. Core Wire : High Tensile

3.5 mm (+/-0.1mm) Dia. Zinc coating : Galvanised to min : 275 GSM. Tensile Strength of Wire: 1400 – 1500 N/sq.mm. Number of loops: 18. Stretchable length: 2.5 mtrs. Locking Clips: 5 clips per set of loops. Weight: 6.7 Kgs (+/-5%). Ref Drawing No :NC/LC/A2/V2.2. Specn for Steel Strip: IS 1730 Specn for wire: IS 280 2006 Specification for coating : Min 275 GSM Zinc coating as per IS 6745/1972 reaffirmed 2006 PTCC shall confirm to CQA

Pune specification No : CQAE/5660/1602/A and controllerate of quality assurance of Engg. Equipment

PUNE Drawing No IMGA-0112/B ( Sheet 1 to 2)

IMGA- 0112 C(Sheet 2 to 2)

IMPD – 1821/B and IMPD -1822/B .

Fence Post : Type : Circular Hollow section Dimensions : 89mm

3 mm (3mm +/- 0.3mm) Thickness: All tolerances as per IS specn IS: 1239 Length : 3.4 mtrs (2.7 mtrs above ground level + 0.7 mtrs under the ground level). Weight: 21.6 Kg (+/-5 %) Coating : Hot Dip glvanised to minimum 350 GSM Hot Dip Galavanising as per IS 2629/IS 4759/ASTM A 123 Ref Drawing No :NC/LC/A6/V2.2. Fence Post- IS: 1239 Material: MS Steel Tube

Truss support Post with Rail end Cap : Type : Circular Hollow section. Dimensions :76mm Dia

3 mm (3mm +/- 0.3mm). Rail End Cap Fitting -76 mm (Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism). Thickness: All tolerances as per IS specn IS:1239. Length &Weight. 1. Truss support for across the slope condition. Length :1800mm

Weight : 9.65 Kg (+5%). Coating : Hot Dip galvanised to minimum 350 GSM. Hot Dip Galavanising as per IS 2629/IS 4759/ASTM A 123.

Straining Y-Arm for supporting top PTCC: Material : CHS of 76mm and 3.2mm guage as per IS 1852. Coating : Hot dip galvanized to Min 350 GSM as per IS 4759/2629

Length of 1 Arm is 510 mm

outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post and fixed with two Nos mushroom head bolt and nut (M8x25mm). Straining Y-Arm will manufactured as per drawing attached. Straining Y Arm will be installed at every 30 mtrs except intermediate arm post.