Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹44.8 L+₹1.6 L (3.72%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹45.0 L+₹1.8 L (4.19%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹45.2 L+₹2.0 L (4.67%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹45.7 L+₹2.5 L (5.77%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
Refer Docs
EMD Value
₹86,600
Closing Date
10 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
PROVN OF OFFICE SHELTER NEAR BLDG NO T 124 OF 205 SATA BTY UNDER GE GANGTOK
2023_MES_602879_1
8133/A/E8
Open Tender
Coal Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹86,600
Yes
1 Sept 2023
12 Jun 2023
12 Jul 2023
13 Jun 2023
10 Jul 2023
20 Jun 2023
Amount
Surface dressing n.exc 15 cm deep getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out complete all as specified and as directed by the Engr-in-Charge.
Material and labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
M&L rendering 15mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces finished even and smooth with out using extra cement all as specified
Material & labour for rendering 20 mm thick in CM (1:4) in two layers of 10mm each (outer layer CM should be added with WPC) on fair faces of brick or concrete surfaces, finished even & fair without using extra cement complete all as directed.
M&L Preparation of newly plastered surfaces of walls and applying Two coat of synthetix enamel paint on new surfaces of walls over wall care putty all as specified and directed.
M&LMaterial & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and as directed by the Engr-in-Charge.
Removing excavated materials(soil) to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point.
M&L walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1: 6) including brought upto course at interval of every 60 cm complete all as specified and as directed.
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
M & L for formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified and as directed
M & L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed
M & L for TMT bars 5mm dia and over upto and incld 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786, complete all as specified and as directed.
Material and labour for sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.
Materials and labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor complete all as specified and as directed by the Engr-in-Charge.
Screed bed or bedding layer in CM 1:6, 20mm thick for laying floor finishes.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match completed
M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 20mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge
Materials and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick fixed on vertical surfaces such as dado , skirting etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete
Material and labour for 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed by the Engr-in-Charge.
Supply & fix Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats etc conforming to Fe 410-W (Gde-E- 250) etc complete.
Supply & fix Mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) etc complete.
Supply and fix MS flat iron as in Bands, straps, supports or stays for hold fasts, clamps for eaves board/facia etc, conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets (Trapezoidal profile) of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc and fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge.
S/F 4 mm thick (E- board) Non asbestos fibre cement building boards fixed or laid/ inserted to GI snap grid framework with screws fixed in ceiling flat or sloping including Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended fromsoffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed.
Material & labour for hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulder etc complete.
S&F 08-10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed including screws to steel/wooden frame work complete all as specified and as directed.
Material & labour for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate), 75 mm thick as in plinth protection / approach path of bldg complete all as specified and directed by the Engr-in-Charge.
Material & labour for Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 20mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster 1:4 all as specified and as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitrred/stopped ends etc
M&L for thick PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed by the Engr-in-Charge.
Supply & fix in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with necessary clamps,bolts etc.complete all as specified and as directed
Supply & fix in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engr-in-Charge.
Supply & fix Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as directed.
S & F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thicl BWP commercial ply or 12mm veneered particle board with commercial face veneers on both faces or 10mm bison panel.
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed withtinned tacks, or galvanised wire staples
Supply & fix 4 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixed with beads, in square not exc. 0.5 Sqm in each pane complete all as specified.
M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated wood surfaces exc 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde-E- 250) complete all as specified and directed by the Engr-in-Charge.
Supply & Fix 100mm long butt hinges medium weight cold rolled MS
S & F 75mm lon butt hinges medium weight cold rolled MS all as specified and as directed.
Supply and fix 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by the Engr-in-Charge.
Supply and fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by the Engr-in-Charge.
Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section.
Supply & fix Aluminium handles, 150 mm size, cast type, anodised.
Supply & fix Aluminium handles, 125 mm size, cast type, anodised.
Supply & fix 140 mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as directed by the Engr-in-Charge.
Supply only water proofing compound
S&F powder coated aluminium sliding window frames of size 65mm x 38mm x 1 mm thick or appropriate section and shutter of section 20mm x 40mm x 1 mm or appropriate equivalent section fixed with 5 mm thick tinted sheet glass with rubber gasket, handle, locking arrangement ect complete all as specified & as directed.
S/F Solid PVC door frame of size 50mm x47mm made out of 5 mm plain colou PVC sheet renforeced with MS square tube, suppling & fixing in opeming as sper specofication & drawing complete all as specified and directed.
S/F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frane made out of MS tube top and bottome rails . M S frame shall be covered with heat moulded plain colour PVC ''C'' channel having a PVC sheet for top rail, lock rail and bottom rail on either side &as gap insert for top rails & botom rails . Paneling of plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & fixing in theframe at site as per specificaton & drawing all as specified and directed.
S/F Steel ventilator with top hung shutter including hinges , steel peg stay complete all as specified and directed.
M&L for 15 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors
M&L for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors complete all as specified and directed by the Engr-in-Charge.
S&F for 15 mm bore bib taps, standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 90 Grms complete all as specified and directed by the Engr-in-Charge.
S/F Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimumweig ht 15mm-110gms) complete all as specified and directed by the Engr-in-Charge.
S&F Vitreous china wash down water closet pan size 520 mm x 360 mm x 390 mm (EWC) with 'P' & 'S' trap, incl fixing bolts , plastic water closet seat cover , closed pattern with flat bottom, and mild steel chromium plated aluminium anodised hanging device, making all necessary connections and making good to floor all as specified and directed by Engr-in-Charge.
S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe ( Make :- Paryware/Hindware/Cera) complete all as specified and directed by the Engr-in-Charge.
S&F of PVC 'P' or 'S' trap 110mm bore complete all as specified and directed by the Engr-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by the Engr-in-Charge.
M/L Concrete bed to drain pipe of 110m m dia including packing under and haunching against the side or pipe after they are laid and tested in complete all as specified and directed by the Engr-in-Charge.
S/F for wall mixer with bend pipe with built in non return valve with all fittings complete all as specified and directed by the Engr-in-Charge.
S/F Wash basins, Vitreous China (flat back or angle back type) of size 630x450mm inlcuding matching pedastal fixed with and including cp brackets with complete fitting complete all as specified and directed by the Engr-in-Charge.
S/ FSoap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.
S/F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge.
S/F CP basin mixer ,single lever with 450 mm braided connection pipe (with out pop-up) complete all as specified and directed.
S/F hand shower (health faucet) alongwith 1m flexible tube complete all as specified and directeed.
S/F 500 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve 20 mm dia complete all as specified and directed.
Supply and fix Aluminium anodised alloy curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed by the Engr-in-Charge.
Cutting into existing manholes for connecting new drain making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar 1:2:4 types B-1 smooh finished and reforming benching are required.
M&L for precast RCC 1:2:4 type B-1 using 20mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified and as directed
M/L for PCC 1:2:4 Type B-1(using 20 mm graded stone aggregates) as incoping including use and waste formwork and finshed the exposed faces of concrete even and smooth with out any extra cement etc complete all as specified and directed.
Supply only 75mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes.
Rough excavation not exc 1.5m deep and getting out in soft/loose soil and all as specified and as directed.
Excavtion in over areas n.exc 1.5m deep and getting out in soft/loose soil and all as specified and as directed.
M&L for precast cement concrete solid block masonry type C1 (1:3:6) using 20mm graded aggregate as in bond stone for stone walling and set in CM (1:6) with plain fair faces incl chamfers, waethering, throating etc and getting complete all as specified and as directed.
M&L plain cement concrete type B0, 1:2:4 (using 12.50mm graded stone aggregate) in coping including weathering slightly rounded or chamfered angles and trotting as directed all as specified and as directed.
Supply only 110mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes.
M&L for hand packing using broken stone or boulders (any thickness) at back of RR stone masonary retaining wall and raising or lowering to the required level complete all as specified.
M&L flushed pointing to RR masonary surfaces in CM 1:4 all as specified and as directed.
M&L RCC type B-1 1:2:4 (Nominal Mix) using 20mm graded stone aggregate as in RCC band complete all as specified and as directed.
Formwork to faces of wall, retaining wall for rough finished surface complete all as specified and as directed.
M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point controlled by one No 5/6 Amp one way switch complete all as specified and directed.
All as per Sl item No. 90 here-in-above but one 3 pin 5 Amps switch socket outlet point on independent board.
All as per item No 90 here-in-before but one socket outlet of 15 AMPs fixed on independent board with 2.5 Sq mm multistandared copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge.
S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.
S&F in repairs ceiling rose, PVC/polycarbonate insulated body, 2/3 terminal and 230 volts, ISI marked surface bakelite suitable for batten fitting complete all as specified and directed
S&F switch socket combination, 2 in 3 pin, 5/6 Amps multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed.
S&F switch socket combination, 2 in 1 pin, 15/16 Amps multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed.
Supply & fix lamp holder angular/straight insulated body, with back plate suitable for battern futtings, white/ivory finish complete all as directed.
Supply & fixing LED tube 4 feet light fitting 1 x 18 W, 220 V AC decorative box type with dirver, holder including LED tube light connecting up with three core flexiable copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiable copper flexiable copper conductor cable of suitable size complete all as directed.
Supply and fixing LED light fitting 1x9W/ 1x10W bulk head luminaries including LED light driver holder connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
Supply and fixing square shape 36 watts LED light 600mm X 600mm X 220 volts AC recessed type with high efficiency PMMA diffuser soft grade free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz of size 150mm sweep with, blades and frame and louvers complete all as specified and as directed.
Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 Ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & sock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed.
S&F MCB DB SPN 8 Ways double door, IP-43, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
Earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 8mm dia MS bars at 150mm c/c both ways with MS hook 10mm dia MS bars etc complete all as specified and as directed including testing on completion.
Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm, complete all as specified and directed
Supply and fix connections 15mm size with PTMT nuts of length 750mm complete all as directed by the Engr-in-Charge.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC condult with accessories shall be measured as One length.
Supply, Laying, jointing & testing in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area of 16 Sqmm 2 core
Supply and laying DWC pipe SN-4 with coupler 50 mm OD,ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. laid in trenches/ fixed to pole /laying under road crossing/fixed on pavement walls with clamps complete all as specified and as directed.
S&F Rotational moulded polyethene water storage tanks 1000 ltrs, ISI Mark, multilayer constraction (Cylindrical vertical with close top) hoisted and fixed in position incl supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and directed.
M&L for 25mm dia steel tubing medium grade galavanised with all fitting fixed complete all as specified and as directed by Engr in charge.
S&F Gun-metal, globe or gate valves 25mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F Brass CP mixer for hot and cold water screwed down to 15mm iron pipe with all fittings.
M/S ANIL KUMAR THAKUR
KAMLESH ENTERPRISE
Phurba Wangdi Sherpa
NISHA CONSTRUCTIONS
BIJAY MITTAL
M/S S. S CHETTRI AND SONS
KARMA TSETEN BHUTIA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .