PROVN OF ONE TOILET BLOCK NEAR B SUB DEPOT IN CAD PULGAON

Amount

Surface dressing n. exc 15 cm deep, getting out in hard/dense soil.

Excavation in trenches, n. exc.1.5m wide and n.exc. 1.5m deep for foundation n.exc.10 Sqm on plan and getting out hard/dense soil complete all as specified and as directed.

M and L for Cement concrete type D2(1:4:8) (using 40mm graded stone aggregates) as in foundation lean concrete complete all as specified and as directed.

M and L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M and L brick work fly ash brick with old size brick straight or curved on plan to any radius in half brick thick walls, built in (1:4)complete all as specified and as directed.

Rendering for 10mm thick with CM (1:6) on fair faces of brick work to be finished even and smooth (without using extra cement) complete all as specified and as directed.

M and L 15mm thick rendering on fair faces of brick masonary or concrete surfaces in cm (1:4) finished even and smooth without using extra cement for external surface of wall complete all as specified and as directed.

M & L 05 mm thick rendering in CM 1:4 on concrete surface as in ceiling surface finished even and smooth without using extra cement.

Supply only liquid water proofing.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing of surplus excavated material to a distance n.exc 50 mtr and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M and L moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M and L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed.

M and L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates )as in sub base floor finised etc complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc all complete.

S and F 3mm thick sheet glass,ordinary quality and glazing with oil putty squares not exc 0.5 Sqm in each pane complete all as specified and as directed.

Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new steel surfacesall as specified and directed by EIC.

M and L mild steel TMT bars 10mm dia and over cut to length bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips quality coinforming to IS complete all as specified and as directed.

M and L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps,spacers and binders complete all as specified and as directed.

M and L three coats of white wash on newly plastred wall and concrete surfaces including preparation of surface complete all as specified and as directed.

M and L three coat of white wash on on ceiling including preparation all as specified and as directed.

M and L two coats of cement base paint in camoflage pattern over newly plaster/concrete surfaces of wall any description of plastered surface including priming coat complete all as specified and as directed as per manufactures instructions.

M and L for PCC (1:3:6) type C1 using 20mm graded stone aggregates as in bed block provided for hold fast or at similar work complete all as specified and as directed.

M and L for reinforced cement concrete type B1 (1:2:4) (20 mm graded stone aggregates) for plinth beam all as specified and as directed.

M and L for reinforced cement concrete type B1 (1:2:4) (20 mm graded stone aggregates) for slab all as specified and as directed.

M and L for reinforced cement concrete type B1 (1:2:4) (20 mm graded stone aggregates) for chajjas all as specified and as directed.

M and L for reinforced cement concrete type B1 (1:2:4) (20 mm graded stone aggregates) for lintels all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) with rough finished surfaces complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs also splays between floors and beams complete all as specified and as directed.

Use and waste formwork to side of concrete foundation,plinth beams,base of column,side of column for rough finishes surfaces of concrete complete all as specified and as directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finishes surfaces of concrete complete all as specified and as directed.

Use and waste of form work to edges of concrete flat horizontal or sloping and similar woprk exc 10 cm but n. exc 20 cm wide for rough finished surfaces complete all as specified and as directed.

M and L for 75mm thick PCC (1:3:6) type C-2 (using 40mm grade stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M and L non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors over 15mm thick cement screed bed in cm (1:6) set and jointed in neet cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

M and L glazed coloured ceramic tiles 450x300x7mm thick as in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick plaster in CM (1:4) complete all as specified and as directed.

S and F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and as directed.

S and F factory Made Solid PVC mould Door Shutter, with particle Board Core 28 to 30 mm thick (stiles), with 2,4,or 6 raised planel design with 2 mm thick Moulder PVC Sheet on the front face & 2 mm Plain colour PVC sheet on back face, suppplying & fixing in frame at site as per specification and drawing.

S & F MS door framed work as in door or gate of angle or other section Fe-290 (Gde E-165) with gusset plats, rails, braces etc complete drilled for fixing for steel sheeting or other covering in door etc including nut and bolts required prepared for hanging with steel doors fitting and hanging on existing pintels etc also all as specified all as specified.

M & L mild steel flat iron as in holdfast 400 mm long embedded in PCC block with splitted ends and in braces in diagonals, hand made sliding bolts, clamps hooks and similar small work comforming to Fe-290, Gde-E-165 including drilling holes and fixing to steel doors with nuts and bolt all as specified and as directed.

Supply & Fix 2.00 mm thick MS sheet plain black steel door and similar work cut to size, holes, punched including round headed screws with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as requried all as directed.

Material & Labour for PCC (1:2:4) type B1 (20mm graded stone aggregates) as in coping, bed block including necessary form work all as specified and directed by EIC

S and F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S and F 150mm aluminium anodised barrel tower bolts of extrubed section complete all as specified and as directed.

S and F extruded 125mm aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S and F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as spectfied and as directed.

S and F rotational moulded three layers polyethylene water storage tank capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S and F 20mm bore ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S and F 20mm bore Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M and L 20mm bore of pipe cutting existing steel tubing for alterations or addtions (Each cut measured) all as specified and as directed.

S and F of 15mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S and F of 20mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S and F fancy type bib taps, cast copper alloy 15mm bore, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S and F fancy type stop valves, cast copper alloy 15mm bore, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S and F vitreous china water closet squating pan Orissa pattern (580 X 440) mm white with integral foot rest complete including lime concrete bedding complete all as specified and as directed.

Supply and fixing PVC valveless, syphonic action type, flushing cistern, low level of 10 ltr capacity, white with inlet, ball valve, float and handle including brackets the exposed surfaces of brakets shall be painted with two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed.

S and F vitreous china wash basin, flat black white, size 550 X 400mm including cutting for and pinning in for bracket and 15mm bore CP Pillar tap 32mm dia CP waste coupling, 32mm dia PVC waste pipe and connection todrain pipe complete all as specified and as directed.

S and F vitreous China Urinal, Half stall type, white and flush pipe suitable for Urinal complete all as specified and as directed.

S and F push tap for suitable for urinals complete all as specified and as directed.

S and F 75mm PVC (SWR) bend all as specified and as directed.

S and F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

S and F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S & F PVC Connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S and F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joint and fixing adhessive with all fittings, including all fixed to walls complete all as specified and as directed.

S and F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in tranches or in floors with all fittings complete all as specified and as directed.

S & F soap dish vitreous China white, approximate size 160x160x90 mm fixed to plugs with choromium plated brass screw complete all as specified and as directed.

M & L machine cut cudappa stone slab 20-25 mm thick in urinal partition and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in urinal partition and other similar situations etc complete as specified and directed.

Plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggr) as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore SGSW pipe complete all as specified and as directed.

M and L Salt glazed stoneware (SGSW) grade ,A, drain pipe 150mm internal dia laid in trenches on concrete bed and jointed complete all as specified and as directed.

M & L for plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in benching and surface channel of manhole complete all as specified and as directed.

M & L precast RCC (1:2:4) type B1 ( 20 mm graded stone aggregate) as in manhole cover includimng form work complete all as specified and as directed.

S & F TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooking and binding with MS wire ( annealed) not less than 0.90 mm dia etc all as specified & directed including handle for manholes covers complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel using extra cement up to 30 cm inner girth complete all as specified and as directed.

Excavating over areas not exc 1.5 deep and getting out in hard/dence soil.

Excavating over areas exc 1.5 m but n. exc 3.0 m deep and getting out in hard/dence soil

M/Lfor PCC 1:2:4 type B2, 50 mm thick ( using 40 mm graded stone aggregate) as in floor finished even & smooth w/o using extra cement.

M & L Loose filling of brick bat of size 80 to 150 mm th. In soak well

S/F cast iron work As in flat iron 50x4 mm in brackets, gully traps, gratings, railing, frames, manhole coves, and similar articles exc 5 Kg each

S and F 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed.

S and F Cast iron cowls 110mm of bore fixed with cement joint complete all as directed.

Removing excavated material n. exc. 50 m and depositing where directed 50 m and upto a total distance of 250 m.

S & F framed work such as grill, gratings, rungs etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framework of water tank and similar work conforming to Fe-290, Gde-E-165.

M&L point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for the following:- (a) One light point controlled by one switch one way

All as per item no 84 but for......... One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

M&L switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed.

S&F ceiling rose surface type with 3 terminals complete all as specified and directed .

S&F LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) all as specified and directed.

S&F of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN 4 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and as directed.

S&F of MCB SPN 20 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series.

S&F of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series. complete all as specified and as directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c bothways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Supply and fix Exhaust fan AC single phase 230/240 V of size 300 mm sweep with louver complete all as specified and as directed.

I P Constructions

Ankit Construction

M/s Dara Constructions, Pulgaon

Bidder Name

I P Constructions

Ankit Construction

RAJ ENTERPRISES

M/s Dara Constructions, Pulgaon