SPL REP TO INTERNAL ROADS IN UNIT AREA OF 5001 ASC BN UNDER GE (EAST) MATHURA.

Amount

Material, Laying and compacting 150 mm thick (compacted thickness) Wet Mix Mecadam (WMM) laid in single layer grading as per Table 400-13 of MoRTH specification for road and bridge works 2013 manufactured in WMM plant, material comprising of clean crushed graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber including scarifying or picking gravelled, macadam or bituminous macadam surface complete all as specified and directed. Note:- The finished surfaces tolerence to be as per Table 900-1 of MoRTH specification for road and bridge works 2013.

M & L Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate application of 0. 7-1 kg/sqm on surface WMM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed .

M&L for Providing and consolidating 50 mm thick premix Dense Bituminous Macadam (DBM Grading -11) using min 4.5% VG 40 grade binder by weight of total mix aggregate gradation as per Grading 2 of Table 500 - 1 0 of MORTH specification for road and bridge works 2013, rolled and compacted to required camber and gradient complete all as specified and directed.

Preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer at 5 Kg per 10 Sq metre with paving bitumen, complete all as specified and directed .

M & L for bituminious premixed asphaltic semi dense concrete 30 mm consolidated thickness with 5.50.% binder content paving bitumen VG-30 by weight of total mix and OPC-43 grade using as filter material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient , complete all as specified and directed .

Site Clearance in soft loose soil, Clearing away all grass vegetation, saplings,shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees;clear away all grass ,vegetation , complete all as specified and directed .

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and consolidated to gradient and camber required complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

S&F in repair convex mirror 800 mm dia made up of polycarbonate reflective mirrors, outdoor use with hood and complete with mounting hardware for upto a height of 1500 mm, above GL and 45 cm below the GL with medium grade MS pipe 50 mm dia including two coats of anticorrosive paint over a coat of red oxide primer body made of ABS embedded in PCC (1:2:4) type B-1 of block size 30x30x45cm including PCC (1:3:6) type C-1 in foundation and necessary excavation in post hole complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (Below or above ground level) complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface , inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc, complete all as specified and as directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, best quality locally available confirming to IS 15658-2006, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed.

Dismantling paver block/interlocking tiles any shape and size complete all as specified and directed.

Fixing only interlocking paver (any shape and thickness) obtained from dismantling under item No. 18 as in foothpath, parks,lawns, drive ways or light traffic parking etc proper embedding/laying of interlocking Paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

M&L for sand cushioning 25 mm thick spread and levelled over sub base complete all as specified and directed.

M/s M S Sharma and Co. (BID ID -3189898)

AMIT RISHABH BUILDERS PRIVATE LIMITED (BID ID -3192951)

Tarun Builders (BID ID -3190075)

Gupta Automobiles (BID ID -3199295)