Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.1 LAccepted-Finance CHENAB VALLEY DIVISION HPPWD UDAIPUR HIMACHAL PRADESH | CHAMBA | HIMACHAL PRADESH | 176207 | L1 | Accepted-Finance ok | |
| 2 | L2₹6.2 L+₹12,714.32 (2.10%)Rejected-Finance VILLAGE BALHI DHAVER P O DHANGOTA BARSAR TEHSIL DHATWAL DISTT HAMIRPUR H P 176040 | HAMIRPUR | HAMIRPUR | HIMACHAL PRADESH | 176040 | L2 | Rejected-Finance Reject | |
| 3 | Rejected-Technical R O VILLAGE SHANOL P O DEVNAGAR TEH DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | - | Rejected-Technical reject |
Tender Value
Refer Docs
EMD Value
₹12,110
Closing Date
30 Apr 2026, 9:30 amClosed
Executive Engineer HPPWD Shimla Division No. III
E.E. Shimla DIVISION NO. III, HPPWD, Shimla-3
C.O New Building DDUZH Shimla. SH Repair of Damaged water pipe lines Male and Female toilets in 3rd floor
2026_PWD_134975_7
SD-III-896-909dt.18-04-2026
Open Tender
Civil Works - Buildings
Percentage
30 days
DDUZH
As per SBD
9 documents required · 9 mandatory
₹350
₹12,110
31 Jul 2026
23 Apr 2026
30 Apr 2026
23 Apr 2026
30 Apr 2026
23 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) For thickness of tiles upto 25mm including carriage of materials in all leads and lifts. | - | Per Square metre | - | - |
| 2 | Disposal of material by Mechanical means on approved dumping site of M.C. Shimla or on arranged by the contractor. i.e. through all mode of transportation including head load animal load or mechanical means alongwith transportation of the unuseful material for disposing including payment of prescribed charges of dumping to the owener of dumping site through all modes of transporation including head load animal load or mechanical means alongwith its levelling, fine dressing and to complete the work by mechanized means and labour(if any required) All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the courses of execution shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of Engineer-in-Charge . | - | Per Cubic metre | - | - |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes Concealed work, including cutting chases and making good the walls etc. | - | Per running metre | - | - |
| 4 | Providing and fixing brass CPVC gate valve with wheel including carriage of materials within all leads and lifts. 20 mm nominal bore | - | Each | - | - |
| 5 | Providing and fixing CPVC union including carriage of materials within all leads and lifts | - | Each | - | - |
| 6 | Providing and fixing PTMT short body bib tap with wall flange 15mm diaincluding including carriage of materials within all leads and lifts. | - | Each | - | - |
| 7 | Providing and fixing PTMT long body bib tap with wall flange 15mm dia including including carriage of materials within all leads and lifts. | - | Each | - | - |
| 8 | Providing & fixing PTMT angle cock with wall flange 15mm nominal bore Jaguar Catalogue No. QQT-7053 including carriage of materials within all leads and lifts. | - | Each | - | - |
| 9 | Providing and fixing wash basin with pedstal C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Jaguar/Hindware catalogue No. ___ | - | Each | - | - |
| 10 | Providing and Fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | - | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
SBD605446.pdf
Tender Documents • 12.41 MB
BOQ_199736.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .