REPAIR TO INTERNAL ELECTRIFICATION AND CONNECTED ITEMS IN OTM MD ACCN UNDER AGE BR I OF GE (WEST) FEROZEPUR CANTT

Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good to disturbed surfaces of walls, floors, etc to match with the existing specifications complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store complete all as specified and directed. Note:-Items to be measured only when found serviceable in all respects complete for reuse.

M&L for Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC concealed conduit /surface conduit with all accessories if require such as bends, reducers, spacers, saddles, junction boxes, Bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holder and light fittings etc) and MS pressed steel/cast iron sunken boxes of suitable size for mounting switches/bell pushes/sockets/fan regulator etc covered with new 3 mm thick laminated Bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheathed stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch 6 Amp.

(b) One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch 6A.

(c) One 5/6 Amp socket outlet independent controlled by one single pole 6 Amp switch.

All as per Srl Item No 3 here-in-before but one three pin 6/16 Amps socket outlet on the independent board with 2.5 Sqmm PVC insulated copper conductor and 2.5 sqmm copper conductor for continuous earthing complete.

All as per item No 3 here-in-before but existing conduit and existing MS pressed steel/ cast iron box complete all as specified and directed. (a) One light point/fan/bell point controlled by one single pole one way switch 6 Amp.

(b) One light point controlled by two 2-way switches 6 A, with cables 1.5 sq. mm size

(c) One 6 Amps socket outlet independent controlled by one single pole 6 Amp switch.

All as per Srl item No 6 here-in-before but existing conduit and existing MS pressed steel/ cast iron box complete all as specified and directed.

S&F new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS Pressed Steel/ CI Box shall be galvanised or painted black with two coats of black bituminous paints or any other paint as indicated .The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal/modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel/cast iron sunken boxes suold be of following sizes with suitable thickness as per IS Code complete all as specified and directed.. (a) 8" x 10" and Suitable for Main switch board

(b) All as per Srl item No 11 here-in-before but of size 7"x4" and Suitable for 15 Amp Independent board.

(c) All as per item No 11 but of size 4"x4" and Suitable for 05 Amp Independent board.

S&F bakelite sheet hylam 3mm thick of white top fixed with cup washers, machine screws on new/existing MS Shuken box including removing existing switch/ switch sockets/ bell push etc and refixing the only serviceable switchs/socket by making slots on new sheet complete all as specified and directed. (a) Min approx size 9"x11" and Suitable for Main switch board

(b) All as per Srl item No 14 here-in-before of min size 8'' x 5" and Suitable for 15 Amp Independent board.

(c) All as per Srl item No 14 here-in-before of min size 5'' x 5" and Suitable for 05 Amp Independent board.

S&F in repair Switch piano flush type 6 Amps, one way complete all as specified and directed.

S&F in repair Switch piano flush type 16 Amps, one way complete all as specified and directed.

S&F in repair Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed.

S&F in repair Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and directed.

S&F in repair Switch piano flush type 6 Amps, two way complete all as specified and directed.

Fixing only serviceable Switch piano flush type single pole one way 5/6 Amp obtained from Item Srl No Item 02 here-in-before complete all as specified and directed.

Fixing only serviceable Switch piano flush type 15 Amps, single pole one way duly ISI marked obtained from Item Srl Item No 02 here-in-before complete all as specified and directed.

Fixing only serviceable Socket outlet 2 in one , 5/6 Amps flush type ISI marked obtained from Item Srl Item 02 here-in-before complete all as specified and directed.

Fixing only serviceable Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked obtained from Item srl No 02 Note for Srl item No 22 to 25: Only Serviceable Item should be fixed at site and rate for taking down of item is included in srl item No 2.

S&F in repair ceiling rose surface type, PVC/polycarbonate, isolated, Bakelite 65 x 50mm, 3 terminals complete all as specified and directed.

S&F in repair Lamp holder insulated body threaded dome pattern, suitable for bracket / batten fitting complete all as specified.

S&F in repair stepped type electronic fan regulator (Socket/switch type) flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and directed.

S&F in repair bell push piano flush type 6 Amps single pole complete all as specified and directed.

S&F in repair bell AC 230 volts single pole complete all as specified and directed.

S&F in repair white/warm 9 Watt LED Bulb suitable for normal lamp holder complete all as specified.

S&F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 2 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 3 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 4 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 6 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 8 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 1/2 module , complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 3 module , complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 4 module , complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 6 module , complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 8 module , complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular Bell push 6A, 1 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F in repair sheet metal enclosure DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 Amps rated enamelled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to disturbed surface and colour matching complete all as specified and directed.

All as per Srl Item No 48 here-in-before but SPN DB's 4 way.

S&F in repair LED tube light fitting 20 Watt, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Makes. Cat Part No LHEXBLP7PN1W020 make "Havells" or techno-commercially equivalent in approved makes

S&F in repair LED tube light fitting 9 Watt batten type fixed on wall/ ceiling etc including connecting up with twin core twisted flexible copper conductor cable with suitable size all as complete all as specified and directed.

S&F in repair MCB single pole neutral (SPN) 240 volts, 40 Amps, 10 KA complete all as specified.

S&F in repair MCB single pole (SP) 240 volts, 40 Amps, 10 KA 'B' Curve complete all as specified and directed.

S&F in repair MCB single pole (SP) 240 volts, 6 to 32 Amps, 10 KA complete all as specified and directed.

S&F in repair 2.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed.

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F PVC Shunken Box rectangular block for mounting normal/modular switches, sockets, fan regulator etc of following sizes. (a) 100mmx100mmx50mm

(b) All as per Srl item No 37 here-in-before but of size 175mmx110mmx50mm.

S&F 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed.

S&F in repair sub main wiring of 6 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.

All as per Srl item No 62 here-in-before but 4 Sqmm Submain wiring.

S&F in repair decorative gate light/garden light made up of high grade unbreakable polycarbonate material suitable for LED Lamp (B22) - Moon 200 base suitable for mounting Pole Dia - 60 mm (max) OD. Dimension: Width: 200 mm & Height: 227 mm for Moon 200 decorative gate light complete all as specified and directed.

S&F in repair 1100 volts grade heavy duty 6 Sq mm two core cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service connections suspended by insulating hangers and porcelain beat not more than 1 metre apart including 4 Sqmm suspension wire, one twin core cable flat or circular complete all as specified and directed.

All as per Srl item No 65 here-in-before but 10 Sqmm 2 core .

All as per Srl item No 65 here-in-before but 16 Sqmm 2 core.

S&F LED Driver for LED Bldg security light/ceiling light up to 45 W including all connection and suitable size of copper wire complete all specifed and directed. Makes: Cat part No S0DQL-65-700-45W of Crompton or techno-commercially equivalent in approved makes.

S&F PVC casing/caping with accessories of size 20mm complete all as specified and directed. Note : Nickel cadmium screws shall be used.

S&F in repair sheet metal enclosure double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series VTPN DBs IP 43 Protection fitted with ABS frame and 415 volts 200 Amps rated enamelled bus bar 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F in repair MCCB 4 pole, 415 volts, 100 Amps, 16 kA, 50 Hz complete all as specified and directed.

S & F in repair MCB TPN 415 volts, 63 Amps, 10 KA breaking capacity complete all as specified.

Supply & fixing in repair rigid non-metallic PVC conduit of size 25mm dia ISI marked with all accessories such as bends, reducers, spacers, saddles, junction complete.

Fixing only sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall icluding taking down of old unsv DB and making good to distrubed surface and colour matching complete all as specified. Note : DB SPN 8 Way will be provided by the MES Deptt as Schedule 'B' item free for fixing.

M&L for earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.

Please Enable Macros to View BoQ information