Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC ASHAA BHAVAN RAMNAGAR NAKA FAIZABAD | AYODHYA | UTTAR PRADESH | 224001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹14.2 L+₹18,840.90 (1.35%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹15.5 L+₹1.5 L (11.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹18.5 L+₹4.5 L (32.4%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹18.8 L+₹4.9 L (34.7%)Rejected-Finance H NO 13149 STREET NO 3 SHIV COLONY BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bhisiana
GE AF Bhisiana PIN-151201
As per BOQ/ Price Schedule
2023_MES_630271_1
GE/BHI/T-99/2023-24
Open Tender
Civil Works
Item Rate
150 days
GE AF Bhisiana
As per NIT/ Tender documents
6 documents required · 6 mandatory
₹500
GE (AF) Bhisiana
₹40,000
29 Feb 2024
30 Nov 2023
30 Dec 2023
30 Nov 2023
28 Dec 2023
14 Dec 2023
30 Nov 2023 - 12 Dec 2023
Amount
Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles complete all specified and directed by Engineer in Charge.
M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in cement mortar (1:6) complete all specified and directed by Engineer in Charge.
Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all specified and directed by Engineer in Charge.
M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying two coat of cement base paint over and a coat of primer after preparation of new plastered surfaces complete all specified and directed by Engineer in Charge.
M&L for rough cast plaster on brick wall consisting under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, including applying two coat of cement base paint over and a coat of primer after preparation of new plastered surfaces complete all specified and directed by Engineer in Charge.
M&L for 12mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying two coats oil bound distemper (OBD) over a coat of primer and after preparation of plastered surfaces complete all specified and directed by Engineer in Charge.
M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and fair (without using extra cement) etc including applying three coats of white wash and after preparation of plastered surfaces complete all specified and directed by Engineer in Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all specified and directed by Engineer in Charge.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engineer in Charge.
M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm / 450x300x7mm thick including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all specified and directed by Engineer in Charge.
M&L for Non skid coloured ceramic tiles/Rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) for laying floor finishes complete all specified and directed by Engineer in Charge.
M&L for Non skid coloured ceramic tiles/Rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all specified and directed by Engineer in Charge.
M&L for vetrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all specified and directed by Engineer in Charge.
M&L for vetrified tiles 9 to 10 mm thick light shade (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all specified and directed by Engineer in Charge.
Dismantling Stone slabs and tiles of any description or thickness laid bedded & pointed in any mortar in floors/walls, aprons complete all specified and directed by Engineer in Charge.
Material and labour for Granite (of any Type) work table rubbed and polished 18-20 mm thick machine cut,in steps, jams, pillars, window cills, cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM(1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to macth with shade of granite , complete all specified and directed by Engineer in Charge.
M&L for 20-25 mm thick kota stone floor tiles machine cut (square/recatangular) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed n CM (1:6) as in screed bed or bedding and demolition of existing floor finishes complete as all specified and directed by Engr-in-Charge.
M&l for kota stone floor tiles 20-25 mm thick, machine cut (square/recatangular) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick cement plaster in CM (1:4)for receiving tile to wall complete as all specified and directed by Engr-in-Charge.
Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all specified and directed by Engineer in Charge.
Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) and removal of debries from MD land complete. (Note : Demolition consider for item No 19 & 20), complete all specified and directed by Engineer in Charge.
M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base to paving complete all as specified and as directed.
M&L for Coloured Chequred cement concrete tiles 30cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all specified and directed by Engineer in Charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed by the Engr-in-Charge.
M&L for sand cushning 25mm thick for interlocking tiles complete all as specified and as directed by the Engr-in-Charge.
Taking down Chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frames) complete all specified and directed by Engineer in Charge.
Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all specified and directed by Engineer in Charge.
Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all specified and directed by Engineer in Charge.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc of size 125 X 60mm, complete all specified and directed by Engineer in Charge.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc of size 105 X 60mm, complete all specified and directed by Engineer in Charge.
M&L for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhats etc complete all specified and directed by Engineer in Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing, complete all specified and directed by Engineer in Charge.
S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg, complete all specified and directed by Engineer in Charge.
S&F aluminium handle 100mm size cast type anodised complete all specified and directed by Engineer in Charge.
S&F aluminium anodised barrel tower bolt of 150mm long extruded section and fixed complete all specified and directed by Engineer in Charge.
S&F factory made IInd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all specified and directed by Engineer in Charge.
S&F factory made glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete all specified and directed by Engineer in Charge.
S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all specified and directed by Engineer in Charge.
S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all specified and directed by Engineer in Charge.
S&F 150mm Aluminium handles, fabricated type complete all specified and directed by Engineer in Charge.
S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all specified and directed by Engineer in Charge.
S&F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all specified and directed by Engineer in Charge.
Taking down Aluminium window/ventilator shutter not exc 1.5 Sqm each including all accessories complete all specified and directed by Engineer in Charge.
Taking down Aluminium door/window shutter exc 1 Sqm but not exc 3 sqm each including all accessories complete all specified and directed by Engineer in Charge.
S&F Powder coated Anodised aluminium frame for doors, windows, ventilators, partations with one or more rebates including joining cleat for fixing etc. complete all specified and directed by Engineer in Charge.
S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, mortice locks anodised aluminum snap beading screws etc. complete all specified and directed by Engineer in Charge.
S&F Powder coated Anodised aluminium side hung /sliding type window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, locks, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all specified and directed by Engineer in Charge.
S&F Powder coated aluminium decorative grill of size of mesh 50mmX50mm fixed with doors, window for safety of glass etc. complete all specified and directed by Engineer in Charge.
S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty/ any type of beading in square/rectangular exceeding 1.00 Sqm in each pane and complete all specified and directed by Engineer in Charge.
S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all specified and directed by Engineer in Charge.
S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all specified and directed by Engineer in Charge.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all specified and directed by Engineer in Charge.
S&F in repair floor door stopper of size 140mm of aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors complete all specified and directed by Engineer in Charge.
S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.
M&L for Shutters of any description exc 1 sqm, but not exc 2 sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required. complete all specified and directed by Engineer in Charge.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all specified and directed by Engineer in Charge.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all specified and directed by Engineer in Charge.
S&F figured glass 4mm thick, pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each panecomplete all specified and directed by Engineer in Charge.
S & F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. end with rod end designed complete all specified and directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC/PVC rain water pipe etc. complete all specified and directed by Engineer in Charge.
S&F 110 mm bore PVC (SWR) bends any radius complete all specified and directed by Engineer in Charge.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and directed by Engineer in Charge.
S&F as in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete all specified and directed by Engineer in Charge.
M&L for 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all specified and directed by Engineer in Charge.
M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all specified and directed by Engineer in Charge.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all specified and directed by Engineer in Charge.
S&F in repair Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete all specified and directed by Engineer in Charge.
S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc complete all specified and directed by Engineer in Charge.
S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all specified and directed by Engineer in Charge.
S&F in repair Health faucet (ABS Body) mild steel pipe with 1.25 metre long flexible tube and ABS wall hook including making onnections and fixed in position complete all specified and directed by Engineer in Charge.
S&F in repairs Vitreous China wash basin, white , flat back,size 550x400mm fixed on existing brackets or stands incl 32mm PVC waste pipe complete all specified and directed by Engineer in Charge.
S&F 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all specified and directed by Engineer in Charge.
S&F 15 mm bore Stop Valve chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all specified and directed by Engineer in Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm complete all specified and directed by Engineer in Charge.
S &F in repairs 15mm dia Bib taps, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all specified and directed by Engineer in Charge.
S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union complete all specified and directed by Engineer in Charge.
S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all specified and directed by Engineer in Charge.
S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed by Engineer in Charge.
supply and fix in repair brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all specified and directed by Engineer in Charge.
Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed. equivalent).
S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all specified and directed by Engineer in Charge.
S & F rotational moulded polyethylene water storage tanks Capacity of tank exc 250 to not exc 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all specified and directed by Engineer in Charge.
S & F rotational moulded polyethylene water storage tanks Capacity of tank exc 500 to not exc 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all specified and directed by Engineer in Charge.
Disconnecting existing tanks Exc 250 Ltr and n exc 500 Ltr, setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re fixing in same position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all specified and directed by Engineer in Charge.
Disconnecting existing tanks Exc 500 Ltr and n exc 1000 Ltr, setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re fixing in same position after and including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all specified and directed by Engineer in Charge.
Dismantling boarding any description fixed in any position with nails complete all specified and directed by Engineer in Charge.
M&L for Non asbestos fibre cement boards 600x600x4mm thick fixed in ceiling Aluminium frame work with screws complete all specified and directed by Engineer in Charge.
S&F Anodised aluminium snap grid frame work of grid 605x605mm for false ceiling including 4mm GI wire & anchor bolts for fixing grid frame work complete all specified and directed by Engineer in Charge.
M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all specified and directed by Engineer in Charge.
S&F in repairs round shape 6 watt 220 volts AC recessed type with high efficeint PMMA diffuser soft glare light complete with drives, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable/wiring from on/off switch points of suitable size complete all specified and directed by Engineer in Charge.
Servicing to rooling shutters of size n exc 15 Sqm Each by taking down the rolling shutter cleaning, greesing ,tightening of springs checking all accessories and welding work where ever needed and refixing the rolling shuter to its position complete all as specified and directed by Engineer in charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all specified and directed by Engineer in Charge.
M&L for 60mm thick reinforced precast cement concrete 1:1:2 with 1.25mm thick MS sheet painted with bituminous paint around the manhole/drain cover (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes/drains etc.) vibromatic, articles with plain faces including necessary form work using surface vibrator and curing will be done in the water resverior complete all as specified and directed. (Reinforcement shall be measured and paid for separately).
S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified and directed.
S&F TMT MS bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Applying a coat of white wash over and after preparation of existing old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc, all as specified and as directed.
Applying a coat of white wash over and after preparation of existing old decorated plastered/unplastered surfaces of ceiling all as specified and as directed.
Applying a coat of oil bound distemper over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars cornices etc, all as specified and as directed.
M&L for complete removal of existing treatment from wall upto plaster surface by sand paper/electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.
M&L for applying interior grade wall care putty 1 to 2mm thick to make the surface smooth complete all specified and directed by Engineer in Charge.
M&L for two coats oil bound distemper any tint on already prepared surfaces of walls over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.
M&L for finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all specified and directed by Engineer in Charge.
M&L for complete removal of existing painting coats on wall and applying two coat of premium quality exterior emulsion paint over a coat of exterior primer of same make on old decorated plastered/unplastered surfaces complete all specified and directed by Engineer in Charge.
M&L for Applying a coat of cement base paint over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc complete all specified and directed by Engineer in Charge.
M&L for Applying a coat of synthetic enamel paint over old painted wooden surfaces of any description having width/girth exceeding 10cm, complete all specified and directed by Engineer in Charge.
M&L for Applying a coat of synthetic enamel paint over old painted steel/iron surfaces of any description having width/girth exceeding 10 cm complete all specified and directed by Engineer in Charge.
M&L for preparation of old painted surfaces of bricks/concrete over 10 cm width/girth and applying one coat of synthetic enamel paint complete all specified and directed by Engineer in Charge.
NAV NIRMAN BUILDER
M/s BALDEV SINGH
P.K ENTERPRISES
M/s Verma Construction Company
SWARN SINGH AND CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .