Augmentation of Running Room at FZR by providing 10 nos. additional rooms (Under Umbrella work 2024-25) & upgradation facilities & infrastructure in existing R/Room at FZR under ADEN-I/FZR in C/with Augmentation of running Rooms at FZR, JUC, MCTM & SVDK by providing 10 Nos. additional rooms

Item Breakup - A-CPWD DSR 2021-Ver-2

gms 18.59S AIR VALVE & WATER METER (BULK TYPE) Cutting holes up to 30x30 cm in walls 18.76 including making good the same: 18.76.1 With common burnt clay F.P.S. (non modular) Each 16 362.4 5798.4 22 bricks 18.77 Cutting holes up to 15x15 cm in R.C.C. floors Each 16 377.1 6033.6 and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe 23 etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Total 230509.90 FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Item- 14 CODE-19 DRAINAGE S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 1 28029.15 28029.15 1 bricks of class designation 7.5 Total 28029.15 Item- 15 CODE-21 ALUMINIUM WORK S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 250 433.95 108487.5 or dyed to required shade according to IS: 1 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 250 531.8 132950 or dyed to required shade according to IS: 2 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 50 1325.55 66277.5 3 (weight not less than 12.50 kg/sqm) FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY 21.17 Providing and fixing anodised aluminium grill Kg 60 560.85 33651 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws 4 @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). Total 341366.00

Item Breakup - B-NS ITEMs

NS-1 Supply and Erection of modular metal Numbers boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar. Metal boxes boards are to be concealed in the wall for 12 Module

NS-2 Supply and Erection of modular metal Numbers boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 8 Module

NS-3 Supply and Erection of modular metal Numbers boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 4 Module

NS-4 Supply and recessing/fixing of 25mm Metre (Medium) PVC conduit pipe conforming to IS 9537/PLIII/1983 or Latest Version with accessories, junction box, etc including making chase, plastering/clamping etc as per technical Total 86055.61