Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAdmitted-Finance | ₹38.1 L | L1 | Admitted-Finance |
| 2 | L2₹40.1 L+₹1.9 L (5.01%)Admitted-Finance | ₹40.1 L+₹1.9 L (5.01%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
| Sl No | Description | Qty | Unit | k. SENTHIL KUMAR CONTRACTOR L2 | D JAYARAMAN L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including making provision for fixing of fittings wherever required. (fittings, Glazing and panelling shall be paid for separately) Note : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. | 2,100 | kgs. | 780 ₹16,38,000 | 755 ₹15,85,500 Lowest |
| 2.00 | Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts Everite/ Hardwyn or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge. | 100 | Nos. | 2,560 ₹2,56,000 | 2,500 ₹2,50,000 Lowest |
| 3.00 | Providing and fixing 12mm thick prelaminated with decorative lamination on both sides, 3 layer medium density (Exterior grade) particle board Grade-I, Type - II conforming to IS:12823 bonded with phenol formaldhyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, window shutters and partition frames with C.P brass /stainless screws etc. complete as per drawings and as directed by Engineer-in-Charge. | 75 | Sq.m. | 1,220 ₹91,500 | 1,145 ₹85,875 Lowest |
| 4.00 | Providing and fixing double action floor spring of ‘Hardwin’ or approved brand and manufacturer (confirming to IS:6315) for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece of M.S Sheet outer box with slide plate etc. complete as per directions of Engineer-in-Charge with brass cover plate. | 10 | Nos. | 8,300 ₹83,000 | 8,090 ₹80,900 Lowest |
| 5.00 | Providing and fixing Swing type heavy quality top PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge. | 15 | Nos. | 275 ₹4,125 | 250 ₹3,750 Lowest |
| 6.00 | Providing and fixing Swing type heavy quality bottom PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge. | 6 | Nos. | 232 ₹1,392 | 230 ₹1,380 Lowest |
| 7.00 | Providing and fixing Al hanging Heavy Quality floor door stopper ISI marked with Twin Rubber stoppers, anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to req. colour or shade with necessary screws etc. complete all as per specification and as directed by the Engineer-in -Charge. Sample to be approved by the Engineer-in-Charge. | 75 | Nos. | 135 ₹10,125 | 127 ₹9,525 Lowest |
| 8.00 | Providing and fixing glazing with 5mm thick clear Float glass pane in aluminium doors, window, ventilator shutters and partitions etc with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge. | 70 | Sq.m. | 2,520 ₹1,76,400 | 2,450 ₹1,71,500 Lowest |
| 9.00 | Providing and fixing reflective / non reflective type sun control polyester film ‘Garware’ or approved equivalent of required shade & colour, pasted to doors/ windows glazing as per requirement including cleaning the surface before and after pasting complete all as directed by the Engineer-in-Charge. | 100 | Sq.m. | 670 ₹67,000 | 610 ₹61,000 Lowest |
| 10.00 | Providing and fixing anodised aluminium tower bolts of size 300x10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-Charge. | 20 | Nos. | 448 ₹8,960 Lowest | 450 ₹9,000 |
Tender Value
₹36.5 L
EMD Value
₹73,000
Closing Date
11 Mar 2026, 11:30 amClosed
Chief Engineer, CEG
Room No. 222, CDO Building, Indira Gandhi Centre for Atomic Research, Kalpakkam - 603102.
Repair and Renovation of aluminium doors and windows, providing partitions in various laboratory and general buildings in IGCAR, Kalpakkam for the year 2026-2027.
2026_IGCAR_900212_1
CEG/IGC/2160/2026
Open Tender
Civil Works
Item Rate
365 days
Kalpakkam
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹73,000
24 Mar 2026
25 Feb 2026
12 Mar 2026
26 Feb 2026
11 Mar 2026
27 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including making provision for fixing of fittings wherever required. (fittings, Glazing and panelling shall be paid for separately) Note : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. | 2,100 | kgs. | - | - |
| 2 | Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts Everite/ Hardwyn or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge. | 100 | Nos. | - | - |
| 3 | Providing and fixing 12mm thick prelaminated with decorative lamination on both sides, 3 layer medium density (Exterior grade) particle board Grade-I, Type - II conforming to IS:12823 bonded with phenol formaldhyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, window shutters and partition frames with C.P brass /stainless screws etc. complete as per drawings and as directed by Engineer-in-Charge. | 75 | Sq.m. | - | - |
| 4 | Providing and fixing double action floor spring of ‘Hardwin’ or approved brand and manufacturer (confirming to IS:6315) for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece of M.S Sheet outer box with slide plate etc. complete as per directions of Engineer-in-Charge with brass cover plate. | 10 | Nos. | - | - |
| 5 | Providing and fixing Swing type heavy quality top PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge. | 15 | Nos. | - | - |
| 6 | Providing and fixing Swing type heavy quality bottom PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge. | 6 | Nos. | - | - |
| 7 | Providing and fixing Al hanging Heavy Quality floor door stopper ISI marked with Twin Rubber stoppers, anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to req. colour or shade with necessary screws etc. complete all as per specification and as directed by the Engineer-in -Charge. Sample to be approved by the Engineer-in-Charge. | 75 | Nos. | - | - |
| 8 | Providing and fixing glazing with 5mm thick clear Float glass pane in aluminium doors, window, ventilator shutters and partitions etc with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge. | 70 | Sq.m. | - | - |
| 9 | Providing and fixing reflective / non reflective type sun control polyester film ‘Garware’ or approved equivalent of required shade & colour, pasted to doors/ windows glazing as per requirement including cleaning the surface before and after pasting complete all as directed by the Engineer-in-Charge. | 100 | Sq.m. | - | - |
| 10 | Providing and fixing anodised aluminium tower bolts of size 300x10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-Charge. | 20 | Nos. | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
BOQ_946214.xls
BOQ • 0.30 MB
2160technicalbid.pdf
Tender Documents • 2.28 MB
2160Undertakingsandformoftender.pdf
Tender Documents • 0.22 MB
2160FormsACDFGHforfillinganduploading.xls
Tender Documents • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .