Kitchen Chimney Ventilation System At The Kitchen Area Of Salt Lake Guest House

Amount

Kitchen Hood

Supply, installation, testing & commissioning of wall mounted Kitchen Hood suitable for commercial restaurant application made of 1mm thick SS 304 with seamless welded finish as per the given size.kitchen Hood should be leakproof stainless steel with cleanable stainless steel baffle filters compliants to NEFA 96.Hood to be considered for Type-I (collect and remove grease, smoke, steam and heat).Filter shall be light in weight and easily removable for cleaning.The velocity across the filters shall not exceed 1.25mps.Pressure drop data required for each hood.Pressure drop should not be greater than 0.7 in.wg.The filters are installed in a vertical position to not less than 45 degrees off horizontal plane for proper oil flow and collection with concealed drain pan to collect oil from drain channel. With concealed lighting arrangement. Type of Oven- Burner, size(mm)- 410x410, Type of Hood- Wall mounted, Hood size(mm)- 710x635

Kitchen Exhaust Fan

GI Ducting

SITC of fabricated GSS sheet ducting for supply and exhaust air complete with neoprene rubber gaskets,elbows,splitter dampers,vanes,hangers,supports etc.as per approved drawing and specifications of following sheet thickness complete as required and as per latested IS-655 standard (ducting layout drawing and its design to be got approved by Engineer incharge before fabrication and erection). a) GSS sheet: 18G (1.25mm)

Duct Damper

SITC of GI volume control duct damper complete with neoprene rubber gaskets,nuts,bolts,screws linkages,flanges etc as per specification

Louver

SITC of powder coated extruded aluminium Louvers but without volume control dampers complete as required

Canvas

Supply and installtion of Canvas Connection fire rated as per requirement.

GI Earthing strip

SITC of 25mm x 5mm G.I. strip on surface or in recess for connections etc.as required

Supply of Aluminium Armoured power cable (XLPE/PVC multi-stranded cable 1.1KV Rating)

4Core 4sq. Mm

Cable Laying

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable/control cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Cable End Termination

SITC of end termination with brass double compression gland and aluminium lugs for 4Core 4sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Motor Starter

SITC of 3ph motor starter control panel in sheet steel enclosure suitable for exhaust fan.

Civil Work

Wall opening and closing and making good to the damages to the original finish including necessary painting.

GBR Techsol (BID ID -3169454)