Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹15.0 L+₹7,225 (0.48%)Rejected-Finance NO 1 4 56 Y SRI BHARATHI NAGAR OPP PARVATHI THEATER CUMBUM ROAD THENKARAI PERIYAKULAM THENI DT 625 601 | PERIYAKULAM | THENI | TAMIL NADU | 625601 | L2 | Rejected-Finance Not being Lowest | |
| 3 | L3₹16.1 L+₹1.2 L (7.74%)Rejected-Finance BLOCK NO 2 FLAT NO 17 FIRST FLOOR KENDRIYA VIHAR PARUTHIPATTU AVADI CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | L3 | Rejected-Finance Not being Lowest | |
| 4 | L4₹16.9 L+₹2.0 L (13.4%)Rejected-Finance 2 FLAT NO 2 B GEETHANJALI CLASSIK APARTMENT 9TH CROSS KAGGADASAPURA CV RAMAN NAGAR BANGALORE 560 093 | BENGALURU URBAN | KARNATAKA | 560093 | L4 | Rejected-Finance Not being Lowest | |
| 5 | L5₹17.6 L+₹2.7 L (17.8%)Rejected-Finance 10 RAMTEKDI ROAD PUNE 411 013 | PUNE | PUNE | MAHARASHTRA | 411013 | L5 | Rejected-Finance Not being Lowest |
Tender Value
₹15.5 L
EMD Value
₹31,600
Closing Date
18 Jul 2023, 6:00 pmClosed
GARRISON ENGINEER I R nd D WEST BANGALORE
GARRISON ENGINEER I R nd D WEST BANGALORE, DRDO COMPLEX, CV RAMAN NAGAR
REPAIRS TO STEEL FURNITURE REVOLVING CHAIRS TABLE AND SOFA SETS UNDER GE I R an D WEST BANGALORE
2023_MES_604462_1
GE(I)/R ND D/BAN/TOKEN/43 OF 2023-24 8196/E8
Open Tender
Civil Works
Item Rate
270 days
GARRISON ENGINEER I R nd D WEST BANGALORE
CLASS AND CATEGORY AS PER NIT
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I R nd D WEST BANGALORE
₹31,600
Yes
6 Jan 2024
26 Jun 2023
24 Jul 2023
27 Jun 2023
18 Jul 2023
12 Jul 2023
27 Jun 2023 - 11 Jul 2023
Amount
Removal of old and unserviceable fabric and foam from the seat and back of chair and replacing with new approved quality fabric (cost not less than Rs.350 / Metre) and 50mm thik cushion of 32 density, quality and design, for Chair revolving low back (Trade Pattern), complete all as specified and directed.
All as per item no.1 but of Chair revolving medium back
All as per item no.1 but of Chair revolving High back
All as per item no.1 but of Chair Visitor/conf
Replacing old and damaged hand rest of chair revolving low, high and medium backs (Trade Pattern) with new hand rest made of polyurethane material to suit the existing size and design, complete all as specified and directed.
Replacing old, damaged and unserviceable hydraulic steel assembly of approved quality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern) complete all as specified and directed.
Replacing old, damaged base platform with new base platform made of hard PVC of good quality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern) all as specified and directed.
Replacing old, damaged and unserviceable tiling bolt assembly (Base plate) with new tiling service assembly of approved quality to suit the existing size and design of chair revolving low, high and medium backs (Trade Pattern) complete all as specified and directed.
Replacing old, damaged and unserviceable caster wheel 50mm dia from Chair revolving all type (Trade Pattern) complete all as specified and directed.
Preparing the surfaces of Almirah large steel with shelves (FD-67 / 1031) by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, olive green / smoke grey colour, both internally and externally (includes legs, shelves etc.,), complete all as specified and directed.
All as per item no.10 but of Almirah med steel with shelves (FD-243 / 1032).
Taking down old and unserviceable locks and provision of new locks of 6-levers of approved quality to suit the existing for Almirah large / medium steel with shelves (FD-67 / 1031 & FD-243 / 1032 ) , complete all as shown in drawing and all as specified and directed.
All as per item no.12 but of Table office steel officer/ clerk (FD- 84/1004)
Taking down old and unserviceable handle and provision of new chromium plated handle of approved quality to suit the existing for Almirah large / medium steel with shelves (FD-67 / 1031 & FD-243 / 1032 ) , complete all as shown in drawing and all as specified and directed.
Removal of old and unserviceable fabric alongwith foam, lining cloth etc of Sofa set 5 Seater (FD -18) and re-setting the GI springs with new cotton rope of 4 mm dia, Supply and fix seat frame 580 x 590 mm made of 8 mm MS rod and providing new upholstery for seat, back and arm rest with hessain cloth of medium quality, coir fibre and foam cushion 25 mm thick, 40 density covered with tapestry cloth of approved quality and colour costing not less than Rs. 250 per metre, complete all as shown on drawings and as directed. Note:- Set of 05 Nos. i.e 5 nos seat and 5 nos back will be measured as one set.
Removal of old and unserviceable fabric/Rexene and rubber foam etc., of Three Seater Sofa (Trade Pattern) and providing new fabric/Rexene of approved quality,design and colour costing not less than Rs. 380 per metre (approx. area 8 sqm), stitched to existing shape and design with 20 mm thick foam to arm rest and 100 mm thick PU foam of 40 density to rest of the areas, underneath of seat covered with approved black cloth and polishing the wooden parts with french polish complete all as directed.
Preparing the surfaces of Rack steel of any size (FD-1039)/TP by removing rust and cleaning with sand paper and applying two coats of synthetic enamel spray painting, olive green / smoke grey colour, both internally and externally (includes legs, shelves etc.,), complete all as specified and directed.
All as per item no.17 but of Book shelf open large steel (FD-69M)
Removing old and damaged seat and Back of chair CBA steel with arms ( FD-75(M) ) and provision of new seat and back including painting the wooden surfaces and tublar pipe frame, two coats of synthetic enamel paint complete all as shown in drawing and all as specified and directed.
Removing old and unserviceable table tops and provision of new table tops with 19 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging alround for Table office, Officer steel 1570 mm x 760 mm (FD-84), complete all as shown in drawing and all as specified and directed.
All as per item no.20 but of Table office, Clerk steel (FD-1004) of size 1200mmx600mm.
Repairs and maintenance of Table office, Clerk steel (FD-1004) by taking out drawer, greasing drawer, channels, refixing the drawer without any damage after painting the entire steel surfaces with two coats of synthetic enamel spray paint (Olive green / smoke grey colour) after preparation of surfaces, and including taking down and provision of PVC rubber shoe / bush to legs etc., complete all as shown in drawing and all as specified and directed.
All as per item no.22 but of Table office, Officer steel (FD-84)
Taking down worn out plywood top from GI Charpoy (FD-220) and fixing of 12 mm thick plywood top size i.e., 900 mm x 1900 mm), welding of 2 Nos of MS flat iron 40 mm x 5 mm and fixing of plywood top with 3" (76 mm) long 6 mm dia bolts with nut and washers complete all as shown in drawing and all as specified and directed.
Taking down worn out plywood top from Charpoy IP folding (FD/388(R)) and fixing of 12 mm thick plywood top' size i.e., 900 mm x 1900 mm), fixing of plywood top with 3" (76 mm) long 6 mm dia bolts with nut and washers complete all as shown in drawing and all as specified and directed.
PRIYADARSHINI CONSTRUCTIONS
SHANMUGA TRADERS
Sreyas Enterprises
KASTURILAL HARICHAND OHRI AND SONS
Ms GHOSH AND SONS
Vivek Engineers
AishwaryaConstructions
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .