Supply Installation and Commissioning of Furniture and Interior Furnishing work under Pkg-II for New Madhya Pradesh Bhawan

ABSTRACT OF COST

FOR FURNITURE, SOFT FURNISHING & WINDOW BLINDS

FOR NEW MADHYA PRADESH BHAWAN

S.NO Description Amount in Rs.

A.1 Section A - Furniture Works 741,11,677.98

A.2 Section B - Soft Furnishing 81,33,820.00

A.3 Section C - Window Blinds 19,07,875.00

GRAND TOTAL 841,53,372.98

GRAND TOTAL 841,53,372.98

Digitally signed by

SURENDRA SURENDRA KUMAR MEENA

KUMAR MEENA Date:

BILL OF QUANTITY

SECTION A - FURNITURE WORKS

NEW MADHYA PRADESH BHAWAN

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

1 Console Table for Entance Lobby

Dimension: 2215mm(L) x 450mm(D) x 750mm(H) 1 1 nos 42,750 42,750

Supplying and placing in position of console Table for multipurposes

uses as per image. The structure of console unit shall be made of solid

wood (First Class Teak). The solid wood shall be KILN dried season .

The top made up of 32mm thk solid wood with pu matt polish and

understructure made out of 40mm thk solid wood (First Class Teak) C 01

with pu matt polish The pu polish treatment on exposed surface of solid

wood should be done in pu matt polish. The product should be complete

as per the reference image and the specification mentioned above

under the guidence of project Architect & Engineer Incharge.

2 Arm Chair for Entrance Lobby

Dimension (W)670mm X (D)660mm X (H)880mm 10 10 nos 22,500 2,25,000

Supplying and placing in position of lounge chair upholstered with fire

retardant fabric as per image. The chair frame is constructed using

pine wood along with soft foam for a comfortable seat. The seat

cushion is made of multi layered foam of density 32-35kg/ m3 . The

seating cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength. The chair with contoured shape with

complete back support , padded back and bordered arms. The chair

having round shape legs of size:40mm thk dia (40mm thk dia at upper EC 01

side and 30mm dia at bottom side) are made out of First Class Teak

wood with pu polish in matt finish. The solid wood shall be KILN dried

season . Seating height of the chair is 425mm from the floor .The fire

retardant fabric is used in the chair having the minimum cost Rs 500

per meter. The pu polish treatment on exposed surface of solid wood

(First Class Teak ) should be done in pu matt polish. The product should

be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

3 Side Table for Entrance Lobby/ Dy. Resident Commissioner room

Dimension (Dia )500mm X (H)500mm 6 6 nos 13,950 83,700

Supplying, and placing in position of Side table as per Image. The table

top made out of 10mm thk toughed glass and base is made out of solid

wood (First Class Teak) with pu matt polish. The solid wood shall be

KILN dried season . The glass table top is join with 150mm thk dia

wooden base with the help of studs of size 40mm thk dia . The pu ST 01

polish treatment on exposed surface of solid wood should be done in pu

matt polish.. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

4 Reception Desk

Dimension (L) 4080 mm X (D)600mm X (H)1100mm RD 02 1 1 nos 1,84,320 1,84,320

Supplying, and placing in position of reception Table as per

Image/drawing . The Table top made up of 36mm thick BWR plywood

(IS:303 grade) with 0.8mm thk post laminate and understructure shall

be made out of 25mm thick BWR plywood with post laminate .

Modesty & side panel shall be 25mm thk BWR plywood with 0.8mm thk

post laminate . Table top height will be 750mm from the floor level &

one additional top height 1100 mm from the floor level in front modesty

& side panel as per shown in image. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot

melt glue at hot temperature. Provision of BWR Plywood with post

laminate Mobile pedestal of size 400mm(L) x 450mm(D)x600mm(HT)

(2 drawer + 1filling). Pedestal Top made out of 18mm thick BWR

plywood with post laminate and rest all storage to be made out of 18

mm thick BWR plywood with post lamainate . All exposed edges shall

be provided with machine pressed 2 mm thick PVC lipping glued with

hot melt EVA glue. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

5 Back Credenza BC 02

Dimension (L) 3145 mm X (D)450mm X (H)750mm 1 1 nos 48,600 48,600

Supplying, and placing in position of back credenza @ 750mm height

as per photograph/drawing . Storage unit having Openable shutters with

shelf and 2 nos drawer provision as per shown in image. The modular

storage unit top shall be made from 18 mm thick BWR plywood (IS:303

grade) with post laminate and rest of the sides as well as shelves and

shutter, drawer to be made up of 18 mm thick BWR plywood with post

laminate while back to be made of 8 mm thick BWR plywood with post

laminate . All edges to be provided with 2 mm thick PVC lipping. . The

storage unit having metal/ss legs. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

6 Reception Table for Back Lobby at Ground Floor

Main Table Dimension (L)1800mm X (D)1000mm X (H)750mm RD 03 1 1 nos 67,500 67,500

Supplying, and placing in position of reception Table as per

Image/drawing . The Table top made up of 36mm thick BWR plywood

(IS:303 grade) with 0.8mm thk post laminate and understructure shall

be made out of 25mm thick BWR plywood with post laminate .

Modesty & side panel shall be 25mm thk BWR plywood with 0.8mm thk

post laminate . Table top height will be 750mm from the floor level &

one additional top height 1100 mm from the floor level in front modesty

& side panel as per shown in image. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot

melt glue at hot temperature. Provision of BWR Plywood with post

laminate Mobile pedestal of size 400mm(L) x 450mm(D)x600mm(HT)

(2 drawer + 1filling). Pedestal Top made out of 18mm thick BWR

plywood with post laminate and rest all storage to be made out of 18

mm thick BWR plywood with post lamainate . All exposed edges shall

be provided with machine pressed 2 mm thick PVC lipping glued with

hot melt EVA glue. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Main Table for Dy. Resident Commissioner room/ Protocol Office/

Reception Manager's Room

Main Table Dimension (L)1800mm X (D)1000mm X (H)750mm

All over Side Runer Dimension (L)1825mm X (D)500mm X (H)605mm

Supplying & placing in position of Office Table as per photograph. The

table top are made out of 36 mm thk BWR plywood (IS:303 grade) with

0.8mm thk post laminate . All exposed edges shall be provided with

machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

The table top supported with side panel & modesty panel. The side

panel made out of 32mm thk BWR plywood with 0.8mm thk post

laminate and modesty panel made of 25mm thk BWR plywood with

post laminate. The table having a provision of side storage of all over

size 1825mm(L) x 500mm(D) x 605mm(H). The side storage

understructure (top, side, bottom, shelf, shutters) made out of BWR

plywood with post laminate and back shall be made of 8mm thk BWR

plywood with post laminate. The side unit having two openable shutters,

3 drawer unit and open storage. All working or non working edges shall

be provided with machine pressed 2mm thick PVC edging using special

hot melt glue at hot temperature. The another side panel of table top

having a provision of 3 drawer unit of size: 400mm(L) x 450mm(D) x

625mm (H) with handles & locking arrangement. The pedstal made out

of 18mm thk BWR plywood with post laminate . All working or non

working edges shall be provided with machine pressed 2mm thick PVC

edging using special hot melt glue at hot temperature. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

Main Chair for Dy. Resident Commissioner room/ Protocol Office/

8 Reception Manager's Room/Reception/ Cashier Chair in OC 01 8 8 nos 11,880 95,040

Dinning/Back Lobby

Supplying, and placing in position of 360 degree revloving high back

chair as per Image. The high mesh back chair is a magnificient chair

with creative tree detailing, so when you look at it from afar it feels as if

a tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with adjustable headrest & armrests. Material

& Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)600mm

X (D)500mm X (H)1282mm, Back Type:high Back, Base:Aluminium

Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum

Seat Height:17.32", Function: Revolving::Pneumatic Height

Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D

Lumbar Support,Locking Mechanism: self tention adjustment/any

position multi locking, chair Handle: adjustable handle with pp pad . The

Seat is made up of moulded foam of density 35-38 kg/m3 with inner &

outer cover and upholstered with fire retardant fabric. The chair is fixed

to a sleek chrome vaulted base with its individual prongs powered by

nylon castors of size 55mm. Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard(eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength(iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Visitor Chair for Dy. Resident Commissioner room/ Protocol

Office/ Reception Manager's Room

Supplying, and placing in position of medim mesh back chair as per

Image. The medium mesh back chair is a magnificient chair with

creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with 2 way adjustable armrests.Material &

Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)609mm X

(D)508mm X (H)1003mm, Back Type:Medium Back, Base: G.F. nylon

structure with nylon net on back, Base Type: cantilever, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is

made up of moulded foam of density 35-38 kg/m3 with inner & outer

cover and upholstered with fire retardant fabric.Warranty period 5 yrs.

The manufacture should have mandatory list of in-house machinery and

testing lab facility for the chairs as per BIFMA standard (eg: (i) load

impact test machine- for testing of seat plywood strength, gas lift

durablity (ii) Back bar test machine- for testing of back plywood and

back bar strength.(iii) Castor and base testing machine- for testing the

castor and base durability. (iv) complete chair testing machine- for

testing of complete chair and handles strength.The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

Linear Workstation for Business Centre/ Tourism Desk and

Reservation Desk

Dimension (L)1000mm X (D)600mm X (H)1050mm WS01 6 6 nos 40,410 2,42,460

Supplying, and placing in position of linear workstation as per Image.

The table top made of 18mm thk BWR plywood (IS:303 grade) with

0.8mm thk post laminate with the height of 750 from ground level and

overall ht including soft board panel is 1050mm(750mm+300mm). All

working or non working edges shall be provided with machine pressed

2mm thick PVC edging using special hot melt glue at hot temperature.

The table top supported with MS powder coated square shape leg of

size: 50mm x 50mm thk with horizontal connector of size 40mm x

40mm thk to support the table top. Providing wire raceway of size

150x100 mm & junction box for connectivity of wires & cables . The

Table top and modesty panel made of 18mm thk BWR plywood with

0.8mm thk post laminate. All working or non working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot

melt glue at hot temperature. Provision of 18mm thk Soft board panel

above table top with powder coated Holder. Provision of one PVC

keyboard tray and metal CPU trolley for each seating. Also a provision

of mobile Pedestal Unit of size:- L-400mm x D-450mm x H-600mm with

a combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick BWR plywood with post laminate with

provision of handles & Locking arrangement. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

11 Workstation chair for Business Centre/ Tourism Desk OC02 4 4 nos 10,890 43,560

Supplying, and placing in position of 360 degree revloving medium back

chair as per Image. The medium mesh back chair is a magnificient

chair with creative tree detailing, so when you look at it from afar it feels

as if a tree is emerging from the roots to the branches and leaves on the

top. The leaves add function to the design being adjustable for improved

lumbar support. The chair with adjustable armrests.Material & Subtype:

Mesh, Colour & Colour Family: Black, Dimension(W)600mm X

(D)500mm X (H)1090mm, Back Type:Medium Back, Base:Aluminium

Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum

Seat Height:17.32", Function: Revolving::Pneumatic Height

Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable, Armrest, 3 D

Lumbar Support,Locking Mechanism: self tention adjustment/any

position multi locking, chair Handle: adjustable handle with pp pad .The

Seat is made up of moulded foam of density 35-38 kg/m3 with inner &

outer cover and upholstered with fire retardant fabric. The chair is fixed

to a sleek chrome vaulted base with its individual prongs powered by

nylon castors of size 55mm. Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength.(iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

12 Main chair for Reservation Desk OC01 2 2 nos 11,880 23,760

Supplying, and placing in position of 360 degree revloving high back

chair as per Image. The high mesh back chair is a magnificient chair

with creative tree detailing, so when you look at it from afar it feels as if

a tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with adjustable headrest & armrests. Material

& Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)600mm

X (D)500mm X (H)1282mm, Back Type:high Back, Base:Aluminium

Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum

Seat Height:17.32", Function: Revolving::Pneumatic Height

Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D

Lumbar Support,Locking Mechanism: self tention adjustment/any

position multi locking, chair Handle: adjustable handle with pp pad . The

Seat is made up of moulded foam of density 35-38 kg/m3 with inner &

outer cover and upholstered with fire retardant fabric. The chair is fixed

to a sleek chrome vaulted base with its individual prongs powered by

nylon castors of size 55mm.Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength.(iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

13 Visitor chair for Reservation Desk OCV01 2 2 nos 10,890 21,780

Supplying, and placing in position of medim mesh back chair as per

Image. The medium mesh back chair is a magnificient chair with

creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with 2 way adjustable armrests.Material &

Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)609mm X

(D)508mm X (H)1003mm, Back Type:Medium Back, Base: G.F. nylon

structure with nylon net on back, Base Type: cantilever, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is

made up of moulded foam of density 35-38 kg/m3 with inner & outer

cover and upholstered with fire retardant fabric.. Warranty period 5 yrs.

The manufacture should have mandatory list of in-house machinery and

testing lab facility for the chairs as per BIFMA standard (eg: (i) load

impact test machine- for testing of seat plywood strength, gas lift

durablity (ii) Back bar test machine- for testing of back plywood and

back bar strength.(iii) Castor and base testing machine- for testing the

castor and base durability. (iv) complete chair testing machine- for

testing of complete chair and handles strength. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

14 Sofa For Guest Lounge

2 seater Dimension (L)1350mm X (D)810mm X (H)850mm S 15 2 2 nos 40,140 80,280

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35 kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength. The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having round

shape legs of size:40mm thk dia (40mm thk dia at upper side and

30mm dia at bottom side) made out of First Class Teak wood with pu

polish in matt finish. The solid wood shall be KILN dried season .

Seating height of the sofa 425mm from the floor & leg height should be

minimumm 120-150mm from the floor level. The fire retardant fabric is

used in the sofa having the minimum cost Rs 500 per meter. The pu

polish treatment on exposed surface of solid wood should be done in pu

matt polish.The product should be complete as per the reference image

and the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

15 Lounge Chair For Guest Lounge

Dimension (W)670mm X (D)660mm X (H)880mm EC02 6 6 nos 22,230 1,33,380

Supplying and placing in position of lounge chair upholstered with fire

retardant fabric as per Image. The lounge chair frame is constructed

using pine wood along with soft foam for a comfortable seat. The seat

cushion is made of multi layered foam of density 32-35 kg/ m3. The

seating cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength. The lounge chair with contoured shape

with complete back support , padded back and bordered arms. The

lounge chair having round shape legs of size:40mm thk dia (40mm

thk dia at upper side and 30mm dia at bottom side) made out of First

Class Teak wood with pu polish in matt finish. The solid wood shall be

KILN dried season . Seating height of the lounge chair is 425mm from

the floor & leg height should be minimumm 120-150mm from the floor

level. The fire retardant fabric is used in the lounge chair having the

minimum cost Rs 500 per meter. The pu polish treatment on exposed

surface of solid wood should be done in pu matt polish.. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

16 Centre Table For Guest Lounge

Dimension (Dia )750mm X (H)450mm CT 11 3 3 nos 28,350 85,050

Supplying, and placing in position of round centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood water

resistant (IS:303 grade) with 4mm thk veneer finish with pu matt polish

and the curvature legs of size 40mm x 40mm thk are made out of

solid wood (First Class Teak) with pu matt polish. The solid wood shall

be KILN dried season .The pu polish treatment on exposed surface of

solid wood/veneer should be done in pu matt polish.. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

17 Side Table For Guest Lounge

Dimension: 600mm(Dia) x 600mm(H) ST07 2 2 nos 19,170 38,340

Supplying and placing in position of Side table as per image. structure

made out of 18mm thk BWR plywood (IS:303 grade) water resistant

covered with 4mm thk veneer finish with pu matt polish. The curvature

leg of size: 40mm x 40mm thk at upper side & 30mm x 30mm at

bottom side are made out of solid wood (First Class Teak) with pu

matt polish . The solid wood shall be KILN dried season .The pu polish

treatment on exposed surface of solid wood/ veneer should be done in

pu matt polish. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

18 Sofa for VVIP lounge & Back Looby

2 seater Dimension (L)1350mm X (D)960mm X (H)880mm S 03 3 3 nos 38,520 1,15,560

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish.. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

19 Lounge Chair for VVIP lounge & Back Looby

Dimension (W)670mm X (D)960mm X (H)880mm EC03 6 6 nos 21,240 1,27,440

Supplying and placing in position of lounge chair upholstered with fire

retardant fabric as per Image. The chair frame is constructed using

pine wood along with soft foam for a comfortable seat. The seat cushion

is made of multi layered foam of density 32-35kg/ m3. The seating

cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength .The chair with contoured shape with

complete back support , padded back and bordered arms. The sofa

having legs of size 50mm x 50mm thk at upper side and 40mm x

40mm thk at bottom side are made out of First Class Teak wood with

pu polish in matt finish. The wooden framing connected with legs at the

bottom of the sofa to be made out of size: 50mm x 50mm thk First

Class Teak with pu polish in matt finish. The solid wood shall be KILN

dried season . Seating height of the chair 425mm from the floor.The fire

retardant fabric is used in the chair having the minimum cost Rs 500

per meter .The pu polish treatment on exposed surface of solid wood

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

20 Centre Table for VVIP lounge & Back Looby

Dimension (W)1140mm X (D)600mm X (H)450mm CT05 3 3 nos 25,650 76,950

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

21 Side Table for VVIP lounge & Back Looby

Dimension (Dia)600mm X (H)460mm ST04 5 5 nos 20,430 1,02,150

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak of size: 40mm

x 40mm thk in curvature design with pu matt polish. The solid wood

shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

22 Console for VVIP lounge

Dimension:(W)3050 mm X (D)450mm X(H)750mm C 09 1 1 nos 44,190 44,190

Supplying and placing in position of console unit as per image.The

storage unit top,side, bottom, shelf are made up of 18mm thk BWR ply

wood (IS:303 grade) water resistant with 0.8mm thk post laminate in

desired natural wood colour instructed by engineer in charge and back

shall be made of 8mm thk BWR ply wood with 0.8mm thk post

laminate. Provision of openable shutters, handles & locking

arrangement on both ends and in centre provision of 2 drawers . The

openable shutters & drawer front facia shall be made out of moulded

HDF and painted wth PU polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

23 Main Table for Doctor room

Main Table Dimension : 1500mm(L) X 750mm(d) x 750mm(h)

Side Runner Dimension : 1100mm(L) X 400mm(d) x 750mm(h)

Providing and placing in position of main table as per image. Modular

tables size 1500mm(L) x 750mm(D) x 750mm(H). Table top made up of

25mm thick BWR plywood (IS:303 grade) with 0.8mm thk post

laminate and understructure shall be made of 18mm thick BWR

plywood (IS:303) with post laminate gable ends and modesty panels.

The working edges shall be provided with machine pressed 2mm thick

PVC edging using special hot melt glue at hot temperature. Provision of

3 drawer mobile pedestal, one CPU trolley and PVC keyboard tray

attached to the table top. Pedstal Unit made of 18mm thk BWR

plywood with 0.8m mm thk post laminate . The table shall be

provisioned with free standing Side Storage of size 1100mm L x

400mm D x 750mm Ht., Storage Top made out of 25mm thick BWR

plywood with post laminate and rest all storage to be made out of 18

mm thick BWR plywood with post laminate . Storage having a openable

shutter with handles and central locking arrangement. All exposed

edges shall be provided with machine pressed 2 mm thick PVC lipping

glued with hot melt EVA glue. The product should be complete as per

the reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

24 Main Chair for Doctor room OC01 1 1 nos 11,880 11,880

Supplying, and placing in position of 360 degree revloving high back

chair as per Image. The high mesh back chair is a magnificient chair

with creative tree detailing, so when you look at it from afar it feels as if

a tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with adjustable headrest & armrests. Material

& Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)600mm

X (D)500mm X (H)1282mm, Back Type:high Back, Base:Aluminium

Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum

Seat Height:17.32", Function: Revolving::Pneumatic Height

Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D

Lumbar Support,Locking Mechanism: self tention adjustment/any

position multi locking, chair Handle: adjustable handle with pp pad . The

Seat is made up of moulded foam of density 35-38 kg/m3 with inner &

outer cover and upholstered with fire retardant fabric. The chair is fixed

to a sleek chrome vaulted base with its individual prongs powered by

nylon castors of size 55mm.Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength.(iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

25 Visitor Chair for Doctor room OCV01 2 2 nos 10,890 21,780

Supplying, and placing in position of medim mesh back chair as per

Image. The medium mesh back chair is a magnificient chair with

creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with 2 way adjustable armrests.Material &

Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)609mm X

(D)508mm X (H)1003mm, Back Type:Medium Back, Base: G.F. nylon

structure with nylon net on back, Base Type: cantilever, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is

made up of moulded foam of density 35-38 kg/m3 with inner & outer

cover and upholstered with fire retardant fabric.. Warranty period 5 yrs.

The manufacture should have mandatory list of in-house machinery and

testing lab facility for the chairs as per BIFMA standard (eg: (i) load

impact test machine- for testing of seat plywood strength, gas lift

durablity (ii) Back bar test machine- for testing of back plywood and

back bar strength.(iii) Castor and base testing machine- for testing the

castor and base durability. (iv) complete chair testing machine- for

testing of complete chair and handles strength. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

Dimension: 450mm(Dia) X 600mm(H) SL01 1 1 nos 10,980 10,980

Supplying, and placing in position of 360 degree revloving stool. The

stool having a Adjustable Height, Maximum Weight Capacity: 130 Kg .

The Seat Padded in synthetic leather . The Seat are made up of 18mm

thk BWR plywood (IS:303 grade) upholstered with PVC polyurethane

foam, seat has foam of density 32-35kg/ m3.The stool to be

provisioned with pneumatic height adjustment which shall have stroke of

10.0 +/- 0.3 cm. The seat is supported by a shiny chrome base

powered by sturdy nylon castors of size 55mm. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

27 Patient Bed

Dimension: (L)1800mm X (W)600mm X (H)980mm PB01 1 1 nos 51,480 51,480

Supplying, and placing in position of patient bed as per Image/drawing .

complete structure (head side panel, leg side panel both side left & right

panel) of bed will be made up of 18mm thk BWR ply wood (IS:303

grade) with 0.8mm thk post laminate. Mattress plinth should be made

of 18mm thk BWR plywood(IS: 303 grade) with french polish . Patient

bed should have padded mattress with leatherette upholstery of 75mm

thk. The head side panel with mechnacial arrangement of uplifting and

holding the same at suitable position and Provision of two drawers with

telescopic channel positioned in either side of bed with D shape handles

. Drawers made out of 18mm thk BWR ply wood (IS:303 grade) with

0.8mm thk post laminate with pvc edge banding. The bed cushion is

made of foam of density 32-35kg/m3 . The leatherette is used in the

patient bed having the minimum cost Rs 500 per meter. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

28 Assistant Table for Doctor's

Dimension: (L)1200mm X (W)500mm X (H)750mm OT 03 1 1 nos 31,500 31,500

Supplying, and placing in position of assisttant table as per

Image/drawing. The table top made up of 25mm thick BWR plywood

(IS:303 grade) with post laminate . The Table supported with 18mm thk

BWR plywood with post laminate side panel & Modesty panel. The

working edges shall be provided with machine pressed 2mm thick PVC

edging using special hot melt glue at hot temperature. Provision of one

fixed Pedestal storage unit of size: 400mm(L) x 400(D) x 725mm(H)

(combination of two drawers and one filing drawer) . Pedstal Unit made

of 18mm thk BWR plywood with post laminate . Also having a provision

of pvc keyboard tray & metal cpu trolley. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

29 Assistant Chair for Doctor's OC03 1 1 nos 11,520 11,520

Supplying, and placing in position of 360 degree revolving medium

mesh back chair as per Image. Styled for the contemporary office

space the chair boasts of a curved backrest with a central console for

lower back support. this helps to improve posture and provides

comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors of size

55mm. A complete executive office chair, chair will bring you comfort

like never before. Material & Subtype:Mesh, Dimension:(W)610mm X

(D)470mm X (H)1040mm, Back Type:Medium Back, Base:Chrome

Base, Base Type:Revolving, Maximum Seating Height:1040mm,

Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height

adjustment::Tilt Tension adjustment::Synchro tilt Locking:PU adjustable

handle : adjustable lumbar support . The pneumatic height adjustment

shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force. The Seat are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength (iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

30 Table for Security Room

Dimesnion: 3200mm(L) x 2255mm(L) x 600 x 750mm (H) TE01 1 1 nos 67,770 67,770

Supplying and placing in position of table as per image. The table top

made out of 25mm thk BWR plywood (IS:303 grade) with 0.8mm thk

post laminate . The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. The table top supported with side panel and modesty

panel. The side panel and modesty panel made out of 18mm thk BWR

plywood with post laminate. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

31 Chair for Security Room OC03 2 2 nos 11,520 23,040

Supplying, and placing in position of 360 degree revolving medium

mesh back chair as per Image. Styled for the contemporary office

space the chair boasts of a curved backrest with a central console for

lower back support. this helps to improve posture and provides

comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors of size

55mm. A complete executive office chair, chair will bring you comfort

like never before. Material & Subtype:Mesh, Dimension:(W)610mm X

(D)470mm X (H)1040mm, Back Type:Medium Back, Base:Chrome

Base, Base Type:Revolving, Maximum Seating Height:1040mm,

Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height

adjustment::Tilt Tension adjustment::Synchro tilt Locking:PU adjustable

handle : adjustable lumbar support . The pneumatic height adjustment

shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force. The Seat are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength (iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

32 Metal Storage for Security Room

Dimesnion: 900mm(L) x 450(D) x 1800mm (H) SS01 2 2 nos 26,460 52,920

Providing and placing storage with 4 Shelves storage as per image . It

has Welded construction.0.8 mm thk CRCA for Back & Doors, Shelf

made up of 1mm thick CRCA & all other components made up of 0.9

mm thick CRCA. Full height Steel Hinged Door. Locking & handle :

Handle locking mechanism. It has height wise Adjustable Shelf Mounting

Uniformly Distributed Load Capacity per each full shelf is 40 Kg

maximum. 4 nos. of Adjustable Full Shelves. M10 Screw type leveller

with hex plastic base Epoxy Polyester Powder coated to the thickness of

50 microns (+/-5 micron). The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

33 Easy Chair for Atrium

Dimension(L)640mm X (D)720mm X (H)845mm EC 04 12 12 nos 30,510 3,66,120

Supplying and placing in position of sofa as per photograph.The sofa is

what Contemporary style looks like. Made in an option of Beige

premium Leatherette, this sofa is sleek and comfortable. The sleek

frame is finished in a rich Brown polish with split panel seating. The back

and seat has Medium to Firm Cushioning for better posture. Material &

subtype:Premium Leatherette,Colour & Colour Family:Beige - Pebble

Beige,Legs:Wooden,Finish:Glossy,Style:Contemporary,Texture:Plain.

The seat cushion is made of multi layered foam of density 32-35kg/m3.

The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength. . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The

polyster polyfill keeps the upholstery wrinke free & soft. The exposed

wooden framing, arms and legs shall be made out of size: 40mm x

40mm thk solid wood (First Class Teak) with pu polish in matt finish. The

leatherette is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

34 Sofa for Atrium (3seater)

3 seater Dimension:(L)1760mm X (D)720mm X (H)845mm S 04 6 6 nos 61,400 3,68,400

Supplying and placing in position of sofa as per photograph.The sofa is

what Contemporary style looks like. Made in an option of Beige

premium Leatherette, this sofa is sleek and comfortable. The sleek

frame is finished in a rich Brown polish with split panel seating. The back

and seat has Medium to Firm Cushioning for better posture. Material &

subtype:Premium Leatherette,Colour & Colour Family:Beige - Pebble

Beige,Legs:Wooden,Finish:Glossy,Style:Contemporary,Texture:Plain.

The seat cushion is made of multi layered foam of density 32-35kg/m3.

The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength. . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The

polyster polyfill keeps the upholstery wrinke free & soft. The exposed

wooden framing, arms and legs shall be made out of size: 40mm x

40mm thk solid wood (First Class Teak) with pu polish in matt finish. The

leatherette is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

35 Centre Table for Atrium

Dimension (Dia )750mm X (H)450mm CT 11 6 6 nos 27,990 1,67,940

Supplying, and placing in position of round centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood water

resistant (IS:303 grade) with 4mm thk veneer finish with pu matt polish

and the curvature legs of size 40mm x 40mm thk are made out of

solid wood (First Class Teak) with pu matt polish. The solid wood shall

be KILN dried season .The pu polish treatment on exposed surface of

solid wood/veneer should be done in pu matt polish. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

36 Side Table for Atrium

Dimension (Dia)600mm X (H)460mm ST 04 12 12 nos 20,340 2,44,080

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak of size: 40mm

x 40mm thk in curvature design with pu matt polish. The solid wood

shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

37 Sofa for VIP lounge and Dining area

3 seater Dimension (W)1970mm X (D)960mm X (H)880mm S03A 3 3 nos 50,130 1,50,390

2 seater Dimension (W)1350mm X (D)960mm X (H)880mm S03 2 2 nos 38,790 77,580

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per meter

.The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

38 Sofa for VIP lounge and Dining area (1 seater)

1 seater Dimension (W)670mm X (D)960mm X (H)880mm EC 03 8 8 nos 21,240 1,69,920

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per meter

.The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

39 Centre Table for VIP lounge and Dining area

Dimension (W)1140mm X (D)600mm X (H)450mm CT 05 4 4 nos 25,740 1,02,960

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

40 Side Table for VIP lounge and Dining area

Dimension (Dia)600mm X (H)460mm ST04 6 6 nos 20,340 1,22,040

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak) of size: 40mm

x 40mm thk in curvature design with pu matt polish. The solid wood

shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

41 Console for VIP lounge and Dining area

Dimension (W)2100mm X (D)400mm X (H)750mm C 06 1 1 nos 25,740 25,740

Supplying and placing in position of console Table for multipurposes

uses as per image. The structure of console unit shall be made of solid

wood (First Class Teak) . The solid wood shall be KILN dried season .

The top made up of 32mm thk solid wood ( First Class Teak) with pu

polish in matt finish and the curvature legs are made out of 40mm x

40mm thk at upper side & 30mm x 30mm thk at bottoam side are made

out of solid wood (First Class Teak) with pu polish in matt finish. The

console unit having a provision of one single drawer with knob handle.

The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish.. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

42 Dining Table for for VIP lounge and Dining area

Dimension (W)900mm X (D)900mm X (H)750mm DT 01 4 4 nos 19,890 79,560

Dimension (W)1800mm X (D)750mm X (H)750mm DT 01A 2 2 nos 35,460 70,920

Dimension (W)1530mm X (D)750mm X (H)750mm DT 01B 1 1 nos 34,020 34,020

Dimension (W)750mm X (D)750mm X (H)750mm DT 01C 1 1 nos 16,740 16,740

Supplying, and placing in position of vip dining table as per Image . The

table top are made out of 25mm thk BWR plywood (IS:303 grade)with

0.8mm thk post laminate . The Table top supported with MS powder

coated pole of size: 75mm x 25mm thk with flat square plate of size

300mm x 300mm as per shown in image. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

43 Dining Chair for for VIP lounge and Dining area

Dimension: 485mm(L) x 465mm(D) x 970mm(H) DC 03 27 27 nos 11,700 3,15,900

Supplying and placing in position of dining chair upholstered with fire

retardant fabric as per image. The chair frame of size: 50mm x 50mm

thk and complete structure is constructed using steam beeach (solid

wood) along with soft foam for a comfortable seat. The solid wood shall

be KILN dried season . The seat cushion is made of foam of density 32-

35kg/ m3 . The chair having legs of size 40mm x 40mm thk at upper

side and 30mm x 30mm thk at bottom side are made out of First Class

Teak wood with pu polish in matt finish. Seating height of the chair

485mm from the floor. The fire retardant fabric is used in the chair

having the minimum cost Rs 500 per meter. The pu polish treatment on

exposed surface of solid wood should be done in pu matt polish.. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

44 Buffet Counter for VIP lounge and Dining area

Dimension:(L)6000mm X (D)700mm X (H)750mm BU 01 1 1 nos 1,05,120 1,05,120

Supplying, and placing in position of buffet counter as per Image. The

counter structure (top,sides, shutter, center partition, bottom) are made

out of 18mm thk BWR plywood (IS:303 grade) with 0.8mm thk post

laminate . The working edges shall be provided with machine pressed

2mm thick PVC edging using special hot melt glue at hot temperature.

The one side of a counter having a combination of openable shutters

and open storage with shelf and the another side of the counter having a

provision of open storage with shelf including electrical light fixture in it.

The counter top of the table shall be provisioned with 18m m thk

granite. The product should be complete as per the reference image

and the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

45 Dining Table for Main dining area

Dimension (W)1350mm X (D)750mm X (H)750mm DT 01D 15 15 nos 26,460 3,96,900

Dimension (W)1700mm X (D)1000mm X (H)750mm DT 01E 1 1 nos 33,750 33,750

Dimension (W)1400mm X (D)645mm X (H)750mm DT 01F 5 5 nos 27,450 1,37,250

Supplying, and placing in position of main dining table as per Image .

The table top are made out of 25mm thk BWR plywood (IS:303 grade)

with 0.8mm thk post laminate . The Table top supported with MS

powder coated pole of size: 75mm x 25mm thk with flat square plate of

size 300mm x 300mm as per shown in image. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

46 Dining Chair for Main dining area

Dimension: 485mm(L) x 465mm(D) x 970mm(H) DC 02 84 84 nos 12,330 10,35,720

Supplying and placing in position of dining chair upholstered with fire

retardant fabric fabric as per image. The curved back elegantly and

slants back ever so slightly adding to its persona along with providing

comfort to the person. The chair frame of size: 50mm x 50mm thk and

complete structure is constructed using steam beeach (solid wood)

along with soft foam for a comfortable seat. The solid wood (First

Class Teak) shall be KILN dried season . The seat cushion is made of

foam of density 32-35kg/ m3. The chair having legs of size 40mm x

40mm thk at upper side and 30mm x 30mm thk at bottom side are

made out of First Class Teak wood with pu polish in matt finish. .Seating

height of the chair 485mm from the floor. The fire retardant fabric is

used in the chair having the minimum cost Rs 500 per meter . The pu

polish treatment on exposed surface of solid wood should be done in pu

matt polish. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

47 Sofa for Main dining area (2 seater)

Dimension:(L)1350mm X (D)780mm X (H)740mm DS 11 5 5 nos 28,350 1,41,750

Supplying and placing in position of sofa upholstered with fire retardant

fabric/leatherette as per Image. The sofa frame and legs of size:

30mm x 30mm thk is constructed using steel with ss 304 grade. The

legs are also made out of steel with 303 grade.The seat cushion is

made of multi layered foam of density 32-35kg/ m3. The seating

cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength. The sofa with contoured shape with

complete back support and padded back . Seating height of the sofa

410mm from the floor. The fire retardant fabric is used in the sofa

having the minimum cost Rs 500 per meter. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

48 Buffet Counter for Main dining area

Dimension:(L)4435mm X (D)700mm X (H)750mm BU 01A 1 1 nos 76,320 76,320

Dimension:(L)3265mm X (D)700mm X (H)750mm BU 01B 1 1 nos 56,700 56,700

Supplying, and placing in position of buffet counter as per Image. The

counter structure (top,sides, shutter, center partition, bottom) are made

out of 18mm thk BWR plywood (IS:303 grade) with 0.8mm thk post

laminate. The working edges shall be provided with machine pressed

2mm thick PVC edging using special hot melt glue at hot temperature.

The one side of a counter having a combination of openable shutters

and open storage with shelf and the another side of the counter having a

provision of open storage with shelf including electrical light fixture in it.

The counter top of the table shall be provisioned with 18m m thk

granite. The product should be complete as per the reference image

and the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

49 Service Counter for Main dining area

Dimension:(L)1040mm X (D)900mm X (H)900mm SE 01 2 2 nos 35,280 70,560

Supplying, and placing in position of service counter as per Image. The

counter structure (top,bottom,sides, shutters, drawer,shelf) are made

out of 18mm thk BWR plywood (IS:303 grade) with 0.8mm thk post

laminate . The service counter having a provision of one drawer

@750mm height from the floor and openable shutter with 2nos shelves

& 3nos compartments in it as per shown in image and on the top of the

counter have open space as per image.The storage to be provisioned

with high raised back and side panel @ 900mm from the floor level.

The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

50 Cashier Table for Main dining area

Dimension:(L)1950mm X (D)600mm X (H)1050mm CA 03 1 1 nos 57,690 57,690

Supplying, and placing in position of cashier Table as per

Image/drawing . The table top made up of 36mm thick BWR plywood

(IS:303 grade) with 0.8mm thk post laminate understructure shall be

made of 25mm thick BWR plywood with 0.8mm thk post laminate.

Modesty & side panel shall be 25mm thk BWR plywood with 0.8mm thk

post laminate . Table top height will be 750mm from the floor level &

one additional top at the height of 300 mm above the table top rest on

BWR plywood overall ht of the table 1050mm. The working edges shall

be provided with machine pressed 2mm thick PVC edging using special

hot melt glue at hot temperature. Provision of BWR plywood with post

laminate storage unit of size 400mm(L)x 450mm(D)x750mm(HT) (one

openable shutter & two drawers as per shown in image). The table to

be provisioned with high raised modesty panel and side panel @

300mm from the table top. All exposed edges shall be provided with

machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

51 Sofa for RC Chamber (Ante room)

3 seater Dimension(L)1890mm X (D)860mm X (H)850mm S 06 1 1 nos 46,980 46,980

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength. The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa legs of size: 50

mm x 50mm thk are made out of First Class Teak wood with pu polish

in matt finish. The solid wood shall be KILN dried season . Seating

height of the sofa 425mm from the floor.The fire retardant fabric is used

in the sofa having the minimum cost Rs 500 per meter. The wooden

framing connected with legs at the bottom of the sofa to be made out of

size: 50mm x 25mm thk First Class Teak with pu polish in matt finish.

The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish.. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

52 Loose Chair for RC Chamber (Ante room)

Dimension (W)670mm X (D)660mm X (H)880mm EC 02 2 2 nos 22,140 44,280

Supplying and placing in position of loose chair upholstered with fire

retardant fabric as per Image. The loose chair frame is

constructed using pine wood along with soft foam for a comfortable

seat. The seat cushion is made of multi layered foam of density 32-

35kg/ m3. The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength .The chair with

contoured shape with complete back support , padded back and

bordered arms. The loose chair having legs of size 40mm x 40mm thk

at upper side and 30mm x 30mm thk at bottom side are made out of

First Class Teak wood with pu polish in matt finish. The solid wood

shall be KILN dried season . Seating height of the loose chair is 425mm

from the floor.The fire retardant fabric is used in the loose chair having

the minimum cost Rs 500 per meter. The pu polish treatment on

exposed surface of solid wood should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

53 Centre Table for RC Chamber (Ante room)

Dimension (W)1140mm X (D)600mm X (H)450mm CT 05 1 1 nos 25,740 25,740

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

54 Side Table for RC Chamber (Ante room)

Dimension (Dia)600mm X (H)460mm ST 04 2 2 nos 20,340 40,680

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak ) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

55 Dining Table for RC Chamber (Ante room)

Dimension (L)1500mm X 600mm(D)x (H)750mm D 03 1 1 nos 42,750 42,750

Supplying, and placing in position of dining table as per image.The

Dining table top shall be provisioned with 18mm thk granite/corian top

rest on First Class Teak solid wood frame of size: 40mm x 25mm thk

and the legs of size:40mm x 40mm thk at upper side and 30mm x

30mm thk at bottom side are made out of solid wood (First Class

Teak) with pu polish in matt finish. The solid wood shall be KILN dried

season .. The product should be complete as per the reference image

and the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

56 Dining Chair for RC Chamber (Ante room)

Dimension:(L)480mm X (D)445mm X (H)970mm DC 03 6 6 nos 11,700 70,200

Supplying and placing in position of dining chair upholstered with fire

retardant fabric as per image. The chair frame of size: 50mm x 50mm

thk and complete structure is constructed using steam beeach (solid

wood) along with soft foam for a comfortable seat. The solid wood shall

be KILN dried season . The seat cushion is made of foam of density 32-

35kg/ m3 . The chair having legs of size 40mm x 40mm thk at upper

side and 30mm x 30mm thk at bottom side are made out of First Class

Teak wood with pu polish in matt finish. Seating height of the chair

485mm from the floor. The fire retardant fabric is used in the chair

having the minimum cost Rs 500 per meter. The pu polish treatment on

exposed surface of solid wood should be done in pu matt polish.. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

PA Main Table for RC Chamber / Office Hall-1 Cubicles (Required

for 3 other PA rooms) (6 Others)

Main Table Dimension : 1500mm(L) X 600 mm(d) x 750mm(h)

Side Runner Dimension : 900mm(L) X 400mm(d) x 750mm(h)

Providing and placing in position of main table as per image. Modular

tables size 1500mm(L) x 750mm(D) x 750mm(H). Table top made up of

25mm thick BWR plywood (IS:303 grade) with 0.8mm thk post

laminate and understructure shall be made of 18mm thick BWR

plywood (IS:303) with post laminate gable ends and modesty panels.

The working edges shall be provided with machine pressed 2mm thick

PVC edging using special hot melt glue at hot temperature. Provision of

3 drawer mobile pedestal, one CPU trolley and PVC keyboard tray

attached to the table top. Pedstal Unit made of 18mm thk BWR

plywood with 0.8m mm thk post laminate . The table shall be

provisioned with free standing Side Storage of size 900mm L x 400mm

D x 750mm Ht., Storage Top made out of 25mm thick BWR plywood

with post laminate and rest all storage to be made out of 18 mm thick

BWR plywood with post laminate . Storage having a openable shutter

with handles and central locking arrangement. All exposed edges shall

be provided with machine pressed 2 mm thick PVC lipping glued with

hot melt EVA glue. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

58 PA Main chair for RC Chamber / Office Hall-1 Cubicles OC 01 4 4 nos 11,880 47,520

Supplying, and placing in position of 360 degree revloving high back

chair as per Image. The high mesh back chair is a magnificient chair

with creative tree detailing, so when you look at it from afar it feels as if

a tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with adjustable headrest & armrests. Material

& Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)600mm

X (D)500mm X (H)1282mm, Back Type:high Back, Base:Aluminium

Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum

Seat Height:17.32", Function: Revolving::Pneumatic Height

Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest, 3 D

Lumbar Support,Locking Mechanism: self tention adjustment/any

position multi locking, chair Handle: adjustable handle with pp pad . The

Seat is made up of moulded foam of density 35-38 kg/m3 with inner &

outer cover and upholstered with fire retardant fabric. The chair is fixed

to a sleek chrome vaulted base with its individual prongs powered by

nylon castors of size 55mm.Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength.(iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

59 PA Visitor Chair for RC Chamber / Office Hall-1 Cubicles OCV 01 8 8 nos 10,890 87,120

Supplying, and placing in position of medim mesh back chair as per

Image. The medium mesh back chair is a magnificient chair with

creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with 2 way adjustable armrests.Material &

Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)609mm X

(D)508mm X (H)1003mm, Back Type:Medium Back, Base: G.F. nylon

structure with nylon net on back, Base Type: cantilever, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is

made up of moulded foam of density 35-38 kg/m3 with inner & outer

cover and upholstered with fire retardant fabric.. Warranty period 5 yrs.

The manufacture should have mandatory list of in-house machinery and

testing lab facility for the chairs as per BIFMA standard (eg: (i) load

impact test machine- for testing of seat plywood strength, gas lift

durablity (ii) Back bar test machine- for testing of back plywood and

back bar strength.(iii) Castor and base testing machine- for testing the

castor and base durability. (iv) complete chair testing machine- for

testing of complete chair and handles strength. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge. -

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

60 Sofa for RC Chamber cabin (3 seater)

Dimension (W)1970mm X (D)960mm X (H)880mm S 03 A 1 1 nos 50,130 50,130

2 seater Dimension (W)1350mm X (D)960mm X (H)880mm S 03 1 1 nos 38,790 38,790

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per meter

.The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish. . The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

61 Loose Chair for RC Chamber cabin

Dimension (W)670mm X (D)960mm X (H)880mm EC 03 2 2 nos 21,240 42,480

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per meter

.The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish. . The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

62 Centre Table for RC Chamber cabin

Dimension (W)1140mm X (D)600mm X (H)450mm CT 05 1 1 nos 25,740 25,740

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

63 Side Table for RC Chamber cabin

Dimension (Dia)600mm X (H)460mm ST 04 1 1 nos 20,340 20,340

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak ) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

64 Main Table for RC Chamber Cabin

Main Table Dimension:(L)2400mm X (D)1130mm X (H)770mm

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Supplying, and placing in position of main table as per photograph. This

precise Boss's Desk is designed with superb qualityFinish made of

engineered wood-medium density fibre board & natural veneer with pu

polish on the same. Functional and stately, with a sturdy design style,

this L shape desk is sure to make a dramatic statement in the office.

Featuring a cherry finish, with delicate panel moulding and a fantastic

size.The modesty frame of the table gives the great look with panel

upholstered wth PVC material which gives the leatherette look.Main

Table top thkness 80mm , side panel/gable end in 70mm thk mdf with

natural venner with pu polish . Main table and side runner having a

skirting @120mm thk with gives a rich look. The office desk comes with

the side runner having enough storage space.The side runner top with a

thickness of 80mm thk that gives the great look . Side table, side panel,

shelves,drawers made up of 18mm thk mdf with natural veneer finish.

Table having a provision of Pedestal of size: 400(L) X 500(D) X 660(H)

having three drawers to store essential & undestructure made out of

18mm thk mdf with natural venner finish .Drawers have the stylish

handle which enhance the look. Material & Subtype:Engineered Wood -

Medium Density Fibre Board, Colour & Colour Family:Red - Cherry.side

storage unit having a side panel, one drawer , one shutter & one shelf

of 18mm thk mdf with venner finish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

65 Back storage for RC Chamber Cabin

Dimension:(L)6065mm X (D)450mm X (H)2000mm SS 06 1 1 nos 2,16,180 2,16,180

Supplying and placing in position of multipurpose back storage of as

per image. A well-built bookcase with the looks this is the complete

package. A compartmentalized shelving system with adequate space

ensures any book will fit in the shelf. This Bookshelf is built using

premium board with veneer finish. The lower cabinets provide an

alcoved space to ensure your books dont yellow with age.The lower

area to be provisioned with openable shutters with handles and locking

arrangements. The upper area to have open shelves for display. The

storage top and sides shall be made with 35mm thickness and shelves

to be made in 25mm thickness. Rest storage in 18mm thick particle

board with veneer over it. The edges shall also be finished in veneerand

PU matt finish. The storage shutter shall have provision of sliding which

can display to any shelf. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

66 Storage for RC Chamber Cabin

Dimension:(L)2000mm X (D)450mm X (H)1800mm SS 04 1 1 nos 59,310 59,310

Dimension:(L)1200mm X (D)450mm X (H)1800mm SS 05 2 2 nos 59,310 1,18,620

Supplying and placing in position of side storage as per image. The

side storage unit (top,sides, bottom,shutters, back and shelf) made up

of 18mm thk BWR ply wood (IS:303 grade) with 0.8mm thk post

laminate in desired natural wood colour instructed by engineer in

charge. Provision of glass in openable shutters with shelf , handles &

locking arrangement. The table to be provisioned with high raised back

panel and side panel @ 75mm from the table top. The product should

be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

67 Main Chair for RC Chamber Cabin OC 05 1 1 nos 58,230 58,230

Supplying and placing in position of 360 degrees Revolving High Back

chair of size :- (W)673mm X (D)508mm X (H)1270mm ; has soft touch

leatherrette, side bolsters and lumbar for maximum support. The chair

has resilent wooden base with hard tread Castors of size 50mm.The

armrest of the chair is with fixed support on both side for better comfort

and support. The armrest shall be in Mahogany wood finish. Provision of

soft plush thick padded headrest. Seat and back are made up of 12 - 14

mm thick hot pressed ply wood upholstered with PVC,with polyurethane

foam. The chair having multi locking mechanism with soft touch and

ergonomically designed seat and back for extra comfort. he chair shall

have an single locking center tilt mechanism with 17 degree max. tilt and

tilt tension adjustment and full 360 degrees swivel. The one piece arm

rest should be made up of solid designer wood and polished with

matching colour. The leather patch fixed on wooden arms. The arm

rests are fitted to the seat and back with 6mm dia. and 64mm long

screw made of HR steel. The prong (base) is made of wooden and

fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong

(base) is 700mm pitch center dia (740mm with castors). The telescopic

bellows is 3 piece telescopic type and injection molded in black

polyurethane. The pneumatic height adjustment shall have adjustment

stroke of 75mm and shall be operated at 30kgs extension force.

Warranty period 5 yrs. The manufacture should have mandatory list of

in-house machinery and testing lab facility for the chairs as per BIFMA

standard(eg: (i) load impact test machine- for testing of seat plywood

strength, gas lift durablity (ii) Back bar test machine- for testing of back

plywood and back bar strength (iii) Castor and base testing machine- for

testing the castor and base durability. (iv) complete chair testing

machine- for testing of complete chair and handles strength. The leather

is used in the chair having the minimum cost Rs 1000 per meter. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

68 Visitor Chair for RC Chamber Cabin OCV02 2 2 nos 31,950 63,900

Supplying and placing in position of 360 degrees Revolving Medium

Back chair of size :- (W)660mm X (D)508mm X (H)1092mm

upholstered with soft touch leatherrette upholstery. The ultra soft

cushions , side bolsters and lumbar bolsters for maximum support. The

chair shall be provisioned with extra padded wooden mahagony handles

for comfort.Provision of soft touch leather upholstery and ultra soft

cushions. The chair has wooden base with hard tread Castors. The Seat

and back are made up of 14 mm thick hot pressed ply wood

upholstered with PVC,with polyurethane foam. The chair having soft

touch and ergonomically designed seat and back for extra comfort.

Chair seat has foam of density 45 (+/-2kg /m3) . The backrest has a

foam of 28 (+/-2kg /m3). The prong (base) is made of wooden and fitted

with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong

(base) is 700mm pitch center dia (740mm with castors). The telescopic

bellows is 3 piece telescopic type and injection molded in black

polyurethane. The pneumatic height adjustment shall have adjustment

stroke of 75mm and shall be operated at 30kgs extension force.

Warranty period 5 yrs. The manufacture should have mandatory list of

in-house machinery and testing lab facility for the chairs as per BIFMA

standard(eg: (i) load impact test machine- for testing of seat plywood

strength, gas lift durablity (ii) Back bar test machine- for testing of back

plywood and back bar strength (iii) Castor and base testing machine- for

testing the castor and base durability. (iv) complete chair testing

machine- for testing of complete chair and handles strength. The

leather is used in the chair having the minimum cost Rs 1000 per

meter. The product should be complete as per the reference image

and the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

69 Table for VC Room

Dimension: 5000(L) X 600(D) X 750(H) (all over 2300 depth ) OT 14 1 1 nos 2,88,270 2,88,270

Supplying and placing in position of vc room table as per image. The

table should be provided in modules of single seater and 2 seater. The

dimensions for single seater should be 760mm (L) x 600mm (W) x

750mm (H) and two seater should be 1350 (L) X 600 (D) X 750 (H).

The work surface top should be of thickness 32mm BWR plywood

(IS:303 grade) with 0.8mm thk post laminate . The side panel are

made up of 25mm thk BWR plywood with 0.8mm thk post laminate &

modesty panel made out of 25mm thk BWR plywood with post

laminate . The legs of the table should be made from 25mm BWR

plywood with 0.8mm thk post laminate . The working and non working

edges shall be finished with machine pressed PVC egdge banding. The

wire carrier should Made from 0.6mm thick CRCA & powder coated 40-

50 microns . Also provision of fliptop box & metal raceway below the

table top for wire flow. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

70 Main Chair for VC Room OC 06 2 2 nos 21,600 43,200

Supplying, and placing in position of 360 degree revolving High back

chair as per Image. This contemporary chair comprises of luxurious

double padding cushion with a central indent that provides lower back

support for proper posture and comfort. The central panel in the

backrest is neatly stitched with a soft seat cushion finished in the same

black leatherette. The Chair nestles on a shiny chrome vaulted base

with nylon castors of size 50mm . the shiny armrests come adeptly

padded for comfort. Material & Subtype:Leatherette, Colour & Colour

Family:Black ,Dimension(W)625mm X (D)490mm X (H)1210mm, Back

Type:High Back, Base:Chrome Base, Base Type:Revolving, Maximum

Seating Height:25", Minimum Seat Height:21.25",Function:

Revolving::Pneumatic Height Lift::Tilt Tension Control::Centre Tilt,

Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall

have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat & back are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3 . The backrest has a foam of

28kg/m3.Warranty period 5 yrs. The manufacture should have

mandatory list of in-house machinery and testing lab facility for the

chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leatherette is used in the chair having the

minimum cost Rs 500 per meter. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

71 Visitor Chair for VC Room OCV 03 10 10 nos 19,080 1,90,800

Supplying, and placing in position of 360 degree revolving medium back

chair as per Image. This contemporary chair comprises of luxurious

double padding cushion with a central indent that provides lower back

support for proper posture and comfort. The central panel in the

backrest is neatly stitched with a soft seat cushion finished in the same

black leatherette. The Chair nestles on a shiny chrome vaulted base

with nylon castors of size 50mm . the shiny armrests come adeptly

padded for comfort. Material & Subtype:Leatherette, Colour & Colour

Family:Black ,Dimension(W)625mm X (D)490mm X (H)1135mm, Back

Type:medium Back, Base:Chrome Base, Base Type:Revolving,

Maximum Seating Height:25", Minimum Seat Height:21.25",Function:

Revolving::Pneumatic Height Lift::Tilt Tension Control::Centre Tilt,

Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall

have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat & back are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3 . The backrest has a foam of

28kg/m3.Warranty period 5 yrs. The manufacture should have

mandatory list of in-house machinery and testing lab facility for the

chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leatherette is used in the chair having the

minimum cost Rs 500 per meter. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

72 Side Storage for vc room

Dimension:(L)4200mm X (D)400mm X (H)750mm SS 06 2 2 nos 59,310 1,18,620

Supplying and placing in position of side storage as per image. The

side storage unit (top,sides, bottom,shutters, back and shelf) made up

of 18mm thk BWR ply wood (IS:303 grade) with 0.8mm thk post

laminate in desired natural wood colour instructed by engineer in

charge. Provision of glass in openable shutters with shelf , handles &

locking arrangement. The table to be provisioned with high raised back

panel and side panel @ 75mm from the table top. The product should

be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

73 Conference Table

Dimension: 13390(L) X 600(D) X 750(H) (all over 2550 depth ) OT 14A 1 1 nos 7,10,370 7,10,370

Supplying and placing in position of conference table as per image. The

table should be provided in modules of single seater and 2 seater. The

dimensions for single seater should be 760mm (L) x 600mm (W) x

750mm (H) and two seater should be 1350 (L) X 600 (D) X 750 (H).

The work surface top should be of thickness 32mm BWR plywood

(IS:303 grade) with 0.8mm thk post laminate. The side panel are made

up of 25mm thk plywood with 0.8mm thk post laminate & modesty

panel made out of 25mm thk plywood with post laminate . The legs of

the table should be made from 25mm plywood with 0.8mm thk post

laminate . The working and non working edges shall be finished with

machine pressed PVC egdge banding. The wire carrier should Made

from 0.6mm thick CRCA & powder coated 40-50 microns . Also

provision of 6 module fliptop box (11 nos) for the scope of USB point,

Electrical Connecctions, internet connection, LAN point to be provided &

metal raceway below the table top for wire flow. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

74 Main Chair for Conference Room OC 06 2 2 nos 21,600 43,200

Supplying, and placing in position of 360 degree revolving High back

chair as per Image. This contemporary chair comprises of luxurious

double padding cushion with a central indent that provides lower back

support for proper posture and comfort. The central panel in the

backrest is neatly stitched with a soft seat cushion finished in the same

black leatherette. The Chair nestles on a shiny chrome vaulted base

with nylon castors of size 50mm . the shiny armrests come adeptly

padded for comfort. Material & Subtype:Leatherette, Colour & Colour

Family:Black ,Dimension(W)625mm X (D)490mm X (H)1210mm, Back

Type:High Back, Base:Chrome Base, Base Type:Revolving, Maximum

Seating Height:25", Minimum Seat Height:21.25",Function:

Revolving::Pneumatic Height Lift::Tilt Tension Control::Centre Tilt,

Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall

have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat & back are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3 . The backrest has a foam of

28kg/m3.Warranty period 5 yrs. The manufacture should have

mandatory list of in-house machinery and testing lab facility for the

chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leatherette is used in the chair having the

minimum cost Rs 500 per meter. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

75 Visitor Chair for Conference Room OCV 03 40 40 nos 19,080 7,63,200

Supplying, and placing in position of 360 degree revolving medium back

chair as per Image. This contemporary chair comprises of luxurious

double padding cushion with a central indent that provides lower back

support for proper posture and comfort. The central panel in the

backrest is neatly stitched with a soft seat cushion finished in the same

black leatherette. The Chair nestles on a shiny chrome vaulted base

with nylon castors of size 50mm . the shiny armrests come adeptly

padded for comfort. Material & Subtype:Leatherette, Colour & Colour

Family:Black ,Dimension(W)625mm X (D)490mm X (H)1135mm, Back

Type:medium Back, Base:Chrome Base, Base Type:Revolving,

Maximum Seating Height:25", Minimum Seat Height:21.25",Function:

Revolving::Pneumatic Height Lift::Tilt Tension Control::Centre Tilt,

Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall

have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat & back are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3 . The backrest has a foam of

28kg/m3.Warranty period 5 yrs. The manufacture should have

mandatory list of in-house machinery and testing lab facility for the

chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leatherette is used in the chair having the

minimum cost Rs 500 per meter. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

76 Visitor Chair for Conference Room against the wall OCV 01 18 18 nos 10,890 1,96,020

Supplying, and placing in position of medim mesh back chair as per

Image. The medium mesh back chair is a magnificient chair with

creative tree detailing, so when you look at it from afar it feels as if a

tree is emerging from the roots to the branches and leaves on the top.

The leaves add function to the design being adjustable for improved

lumbar support. The chair with 2 way adjustable armrests.Material &

Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)609mm X

(D)508mm X (H)1003mm, Back Type:Medium Back, Base: G.F. nylon

structure with nylon net on back, Base Type: cantilever, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32" . The Seat is

made up of moulded foam of density 35-38 kg/m3 with inner & outer

cover and upholstered with fire retardant fabric.. Warranty period 5 yrs.

The manufacture should have mandatory list of in-house machinery and

testing lab facility for the chairs as per BIFMA standard (eg: (i) load

impact test machine- for testing of seat plywood strength, gas lift

durablity (ii) Back bar test machine- for testing of back plywood and

back bar strength.(iii) Castor and base testing machine- for testing the

castor and base durability. (iv) complete chair testing machine- for

testing of complete chair and handles strength. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

77 Side Table with visitor chair in Conference Room against the wall

Dimension: 550mm(Dia) X 500mm(H) ST 05 12 12 nos 10,890 1,30,680

Supplying, and placing in position of side table of as per image/drawing

. The side table made out of 18mm thk BWR plywood (IS:303 grade)

with 0.8mm thk post laminate . All working or non working edges shall

be provided with machine pressed 2mm thick PVC edging using special

hot melt glue at hot temperature. The Table top supported with MS

powder coated pole of size: 50mm thk dia with flat circular plate of size:

300mm thk dia. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

78 Console in Conference Room against the wall

Dimension:(L)4000mm X (D)450mm X (H)750mm SS 06A 2 2 nos 59,310 1,18,620

Supplying and placing in position of side storage as per image. The

side storage unit (top,sides, bottom,shutters, back and shelf) made up

of 18mm thk BWR ply wood (IS:303 grade) with 0.8mm thk post

laminate in desired natural wood colour instructed by engineer in

charge. Provision of glass in openable shutters with shelf , handles &

locking arrangement. The table to be provisioned with high raised back

panel and side panel @ 75mm from the table top. The product should

be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

79 Sofa for Arc chamber (2 seater)

2 seater Dimension:(L)1200mm X (D)720mm X (H)845mm S 04A 1 1 nos 44,550 44,550

Supplying and placing in position of sofa as per photograph.The sofa is

what Contemporary style looks like. Made in an option of Beige

premium Leatherette, this sofa is sleek and comfortable. The sleek

frame is finished in a rich Brown polish with split panel seating. The back

and seat has Medium to Firm Cushioning for better posture. Material &

subtype:Premium Leatherette,Colour & Colour Family:Beige - Pebble

Beige,,Legs:Wooden,Finish:Glossy,Style:Contemporary,Texture:Plain.

The seat cushion is made of multi layered foam of density 32-

35kg/m3. The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength. . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The

polyster polyfill keeps the upholstery wrinke free & soft. The exposed

wooden framing, arms and legs shall be made out of size: 40mm x

40mm thk solid wood (First Class Teak) with pu polish in matt finish. The

leatherette is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

80 Easy Chair for Arc chamber

Dimension(L)640mm X (D)720mm X (H)845mm EC O4 2 2 nos 30,510 61,020

Supplying and placing in position of sofa as per photograph.The sofa is

what Contemporary style looks like. Made in an option of Beige

premium Leatherette, this sofa is sleek and comfortable. The sleek

frame is finished in a rich Brown polish with split panel seating. The back

and seat has Medium to Firm Cushioning for better posture. Material &

subtype:Premium Leatherette,Colour & Colour Family:Beige - Pebble

Beige,,Legs:Wooden,Finish:Glossy,Style:Contemporary,Texture:Plain.

The seat cushion is made of multi layered foam of density 32-35kg/m3.

The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength. . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The

polyster polyfill keeps the upholstery wrinke free & soft. The exposed

wooden framing, arms and legs shall be made out of size: 40mm x

40mm thk solid wood (First Class Teak) with pu polish in matt finish. The

leatherette is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

81 Centre Table for Arc chamber

Dimension (W)1140mm X (D)600mm X (H)450mm CT 05 1 1 nos 25,740 25,740

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

82 Side Table for Arc chamber

Dimension (Dia)600mm X (H)460mm ST 04 1 1 nos 20,340 20,340

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak ) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish.. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

83 TV Console for Arc chamber

Dimension (L)1800mm X (D)450mm X (H)750mm C 05 2 2 nos 25,560 51,120

Supplying and placing in position of TV console unit as per image. The

structure (top,sides, bottom,shutters, and shelf) are made up of 18mm

thk BWR ply wood (IS:303 grade) with 0.8mm thk post laminate . The

legs of the unit are made out of size:40mm x 40mm thk solid wood

(First Class Teak) with pu polish in matt finish. The solid wood shall be

KILN dried season . Also a Provision of openable shutters storage with

shelf on both ends and open storage with shelf for dispaly as per

shown in image. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

84 Console for Arc chamber

Dimension (L)1800mm X (D)450mm X (H)750mm C 06 1 1 nos 38,160 38,160

Supplying and placing in position of console Table for multipurposes

uses as per image. The structure of console unit shall be made of solid

wood (First Class Teak) . The solid wood shall be KILN dried season .

The top made up of 32mm thk solid wood ( First Class Teak) with pu

polish in matt finish and the curvature legs are made out of 40mm x

40mm thk at upper side & 30mm x 30mm thk at bottoam side are made

out of solid wood (First Class Teak) with pu polish in matt finish. The

console unit having a provision of one single drawer with knob handle.

The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish.The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

85 Main Table for Arc chamber

Main Table Dimension:(L)2000mm X (D)1000mm X (H)750mm

Side Runner Dimension:(L)900mm X (D)450mm X (H)750mm

Supplying, and placing in position of main Table as per drawing. The

Table top made out of 25mm thk BWR plywood (IS:303 grade) with

0.8mm thk post laminate with 2mm thk pvc edge banding. The side

panel & modesty panel are made up of 18mm thick BWR plywood with

post laminate . The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x

D-450mm x H-600mm) attached to the table top. Pedestal Unit have a

combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick BWR plywood with post laminate with

provision of handles & central Locking arrangement. The table have a

provision of free standing. Side Storage of size 900mm L x 450mm D x

750mm Ht., Storage Top made out of 25mm thick BWR plywood with

post laminate and rest all storage to be made out of 18 mm thick BWR

plywood with post laminate . All exposed edges shall be provided with

machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

The storage unit having provision of 3 drawer unit, one openable

shutter, one open storage with handle & central locking provision. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

86 Main Chair for Arc chamber OC 07 1 1 nos 25,830 25,830

Supplying, and placing in position of 360 degree revloving high back

chair as per Image.The premium upholstery is an added touch of extra

class. With its supple leatherrite upholstery. Equipped with a multi-

locking knee tilt mechanism and adjustable arms this chair is is high on

back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm

Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height

Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating

Height: 24",Minimum Seat Height: 20.86", Base :Chrome Base,

Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be

operated at 30kgs extension force. The Seat are made up of 12mm thk

hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 30-32 kg/m3. The chair is fixed to a

sleek chrome vaulted base with its individual prongs powered by nylon

castors of size 55mm. Warranty period 5 yrs. The manufacture should

have mandatory list of in-house machinery and testing lab facility for

the chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leather is used in the chair having the minimum

cost Rs 1000 per meter. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

87 Visitor Chair for Arc chamber OCV 05 3 3 nos 25,200 75,600

Supplying, and placing in position of 360 degree revloving medium back

chair as per Image. The premium upholstery is an added touch of extra

class. With its supple leatherrite upholstery. Equipped with a multi-

locking knee tilt mechanism and adjustable arms this chair is is high on

back support and comfort.t.Dimension (W)640mm X (D)500mm X

(H)1130mm, Leather: Semi Aniline Leather, Function:

Revolving::Pneumatic Height Lift::Adjustable Armrest::Multilocking Knee

Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86", Base

:Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt.The

pneumatic height adjustment shall have adjustment stroke of 100 mm

and shall be operated at 30kgs extension force. The Seat are made up

of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 30-32kg/m3. The

chair is fixed to a sleek chrome vaulted base with its individual prongs

powered by nylon castors of size 55mm. Warranty period 5 yrs. The

manufacture should have mandatory list of in-house machinery and

testing lab facility for the chairs as per BIFMA standard (eg: (i) load

impact test machine- for testing of seat plywood strength, gas lift

durablity (ii) Back bar test machine- for testing of back plywood and

back bar strength (iii) Castor and base testing machine- for testing the

castor and base durability. (iv) complete chair testing machine- for

testing of complete chair and handles strength. The leather is used in

the chair having the minimum cost Rs 1000 per meter. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

88 Back Credenza for Arc chamber

Dimension:(L)2000mm X (D)450mm X (H)1800mm SS 05A 1 1 nos 67,590 67,590

Supplying and placing in position of full height Storage as per image.

Complete storage unit (top, sides, shutters, drawer, shelves) are made

out 18mm thk BWR plywood (IS:303 grade) with 0.8mm thk post

laminate while back to be made of 8 mm thick BWR plywood with post

laminate. The working edges shall be provided with machine pressed

2mm thick PVC edging using special hot melt glue at hot temperature.

The lower area to be provisioned with drawers and openable shutters

with handles and locking arrangements. The upper area to have open

storage with shelves for display and openable shutter storage with shelf

in it as per shown in image. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

89 Linear Workstation for Office Hall-1,2

Dimension: 1350mm(L) x 600mm(D) x 1050mm(D) WS 02 27 27 nos 57,510 15,52,770

Supplying, and placing in position of Linear workstation as per

Image.The worktop made out of 25mm thk BWR plywood (IS:303

grade) with 0.8mm thk post laminate .The Table top supported on

Mild Steel 50mm x50mm Slanted Leg and 50mm x 25mm Horizontal

connectors with Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk

Metal panel fixed on both side of the "T" leg for Vertical wire carrying

purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal

powder coated raceway with Powder coting of 50 Micron below top for

wiring.Vertical wire carrying pole with powder coating 50 micron below

top for wiring( Non- sharing workstation ). Also having a provision of

plywood/ms perfoated sheet hanging modesty and provisioned of Soft

board panel above the table top with MS powder coated holders. Having

Junction box & wire tray for wire passing. The table also a provision of

sharing mobile Pedestal Unit between in two seatings . The pedstal of

size:- L-400mm x D-450mm x H-600mm with a combination of 2 drawer

& one filing drawer handles & Locking arrangement . The pedestal

storage unit shall be made of 18 mm thick BWR plywood with 0.8mm

thk post laminate . Also having a one PVC keyboard tray and CPU

trolley for each seating. The workstation having a additional storage (if

required) on the table top of size: 400 mm(L)x 450mm(D)x 450mm(H).

Storage made out of 18mm thk BWR plywood with post laminate.

The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

90 Over head storage Office Hall-1 & 2

Dimension: 1200mm(L) x 450mm(D) x 600mm(H) OHS 01 15 15 nos 13,590 2,03,850

Supplying and placing in position of overhead storage @ 600mm height

as per photograph. The modular overhead storage unit top shall be

made from 18 mm thick BWR plywood (IS:303 grade) with 0.8mm thk

post laminate and rest of the sides as well as shelves and shutter to be

made up of 18 mm thick BWR plywood with post laminate while back to

be made of 8 mm thick BWR plywood with post laminate . All edges to

be provided with 2 mm thick PVC lipping . Each unit to have openable

shutters with shelf, handles and locking provision. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

91 Storage Office Hall-1

Dimension: 1200mm(L) x 450mm(D) x2000mm(H) OHS 02 5 5 nos 27,000 1,35,000

Supplying and placing in position of overhead storage @ 2000mm

height as per photograph. The modular overhead storage unit top shall

be made from 18 mm thick BWR plywood (IS:303 grade) with 0.8mm

thk post laminate and rest of the sides as well as shelves and shutter to

be made up of 18 mm thick BWR plywood with post laminate while

back to be made of 8 mm thick BWR plywood with post laminate . All

edges to be provided with 2 mm thick PVC lipping . Each unit to have

openable shutters with shelf, handles and locking provision. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

92 Chair for Workstation for Office Hall-1,2 OC 03 27 27 nos 11,520 3,11,040

Supplying, and placing in position of 360 degree revolving medium

mesh back chair as per Image. Styled for the contemporary office

space the chair boasts of a curved backrest with a central console for

lower back support. this helps to improve posture and provides

comfortable seating all day long. The chair is fixed to a sleek chrome

vaulted base with its individual prongs powered by nylon castors of size

55mm. A complete executive office chair, chair will bring you comfort

like never before. Material & Subtype:Mesh, Dimension:(W)610mm X

(D)470mm X (H)1040mm, Back Type:Medium Back, Base:Chrome

Base, Base Type:Revolving, Maximum Seating Height:1040mm,

Minimum Seat Height:940mm, Function:Revolving::Pneumatic Height

adjustment::Tilt Tension adjustment::Synchro tilt Locking:PU adjustable

handle : adjustable lumbar support . The pneumatic height adjustment

shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force. The Seat are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.Warranty period 5 yrs. The manufacture

should have mandatory list of in-house machinery and testing lab

facility for the chairs as per BIFMA standard (eg: (i) load impact test

machine- for testing of seat plywood strength, gas lift durablity (ii) Back

bar test machine- for testing of back plywood and back bar strength (iii)

Castor and base testing machine- for testing the castor and base

durability. (iv) complete chair testing machine- for testing of complete

chair and handles strength. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

93 Main Table for Senior Chamber-01 & 02

Main Table Dimension:(L)2000mm X (D)1000mm X (H)770mm

Side Runner Dimension:(L)900mm X (D)450mm X (H)770mm

Supplying, and placing in position of main Table as per drawing. The

Table top made out of 25mm thk BWR plywood (IS:303 grade) with

0.8mm thk post laminate with 2mm thk pvc edge banding. The side

panel & modesty panel are made up of 18mm thick BWR plywood with

post laminate . The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x

D-450mm x H-600mm) attached to the table top. Pedestal Unit have a

combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick BWR plywood with post laminate with

provision of handles & central Locking arrangement. The table have a

provision of free standing. Side Storage of size 900mm L x 450mm D x

750mm Ht., Storage Top made out of 25mm thick BWR plywood with

post laminate and rest all storage to be made out of 18 mm thick BWR

plywood with post laminate . All exposed edges shall be provided with

machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

The storage unit having provision of 3 drawer unit, one openable

shutter, one open storage with handle & central locking provision. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

94 Main Chair for Senior Chamber-01 & 02 OC 07 2 2 nos 25,830 51,660

Supplying, and placing in position of 360 degree revloving high back

chair as per Image.The premium upholstery is an added touch of extra

class. With its supple leatherrite upholstery. Equipped with a multi-

locking knee tilt mechanism and adjustable arms this chair is is high on

back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm

Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height

Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating

Height: 24",Minimum Seat Height: 20.86", Base :Chrome Base,

Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be

operated at 30kgs extension force. The Seat are made up of 12mm thk

hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 30-32 kg/m3. The chair is fixed to a

sleek chrome vaulted base with its individual prongs powered by nylon

castors of size 55mm. Warranty period 5 yrs. The manufacture should

have mandatory list of in-house machinery and testing lab facility for

the chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leather is used in the chair having the minimum

cost Rs 1000 per meter. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

95 Visitor Chair for Senior Chamber-01 & 02 OCV 05 6 6 nos 25,200 1,51,200

Supplying, and placing in position of 360 degree revloving high back

chair as per Image.The premium upholstery is an added touch of extra

class. With its supple leatherrite upholstery. Equipped with a multi-

locking knee tilt mechanism and adjustable arms this chair is is high on

back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm

Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height

Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating

Height: 24",Minimum Seat Height: 20.86", Base :Chrome Base,

Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be

operated at 30kgs extension force. The Seat are made up of 12mm thk

hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 30-32 kg/m3. The chair is fixed to a

sleek chrome vaulted base with its individual prongs powered by nylon

castors of size 55mm. Warranty period 5 yrs. The manufacture should

have mandatory list of in-house machinery and testing lab facility for

the chairs as per BIFMA standard (eg: (i) load impact test machine- for

testing of seat plywood strength, gas lift durablity (ii) Back bar test

machine- for testing of back plywood and back bar strength (iii) Castor

and base testing machine- for testing the castor and base durability. (iv)

complete chair testing machine- for testing of complete chair and

handles strength. The leather is used in the chair having the minimum

cost Rs 1000 per meter. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

96 Console for Senior Chamber-01 & 02

Dimension (L)1800mm X (D)450mm X (H)750mm C 06 2 2 nos 38,160 76,320

Supplying and placing in position of console Table for multipurposes

uses as per image. The structure of console unit shall be made of solid

wood (First Class Teak) . The solid wood shall be KILN dried season .

The top made up of 32mm thk solid wood ( First Class Teak) with pu

polish in matt finish and the curvature legs are made out of 40mm x

40mm thk at upper side & 30mm x 30mm thk at bottoam side are made

out of solid wood (First Class Teak) with pu polish in matt finish. The

console unit having a provision of one single drawer with knob handle.

The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish.The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

97 Sofa for Senior Chamber-01 & 02

2 seater Dimension:(L)1200mm X (D)720mm X (H)845mm S 04A 4 4 nos 44,550 1,78,200

Supplying and placing in position of sofa as per photograph.The sofa is

what Contemporary style looks like. Made in an option of Beige

premium Leatherette, this sofa is sleek and comfortable. The sleek

frame is finished in a rich Brown polish with split panel seating. The back

and seat has Medium to Firm Cushioning for better posture. Material &

subtype:Premium Leatherette,Colour & Colour Family:Beige - Pebble

Beige,Legs:Wooden,Finish:Glossy,Style:Contemporary,Texture:Plain.

The seat cushion is made of multi layered foam of density 32-35kg/m3.

The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength. . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The

polyster polyfill keeps the upholstery wrinke free & soft. The exposed

wooden framing, arms and legs shall be made out of size: 40mm x

40mm thk solid wood (First Class Teak) with pu polish in matt finish. The

leatherette is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

98 Centre Table for Senior Chamber-01 & 02

Dimension (W)1140mm X (D)600mm X (H)450mm CT 05 2 2 nos 25,740 51,480

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish.The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

99 Side Table for Senior Chamber-01 & 02

Dimension (Dia)600mm X (H)460mm ST 04 4 4 nos 20,340 81,360

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak ) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish.The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

100 Sofa for VIP Waiting

2 seater Dimension (L)1350mm X (D)960mm X (H)880mm S 03 1 1 nos 38,520 38,520

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish.. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

101 Chair for VIP Waiting

Dimension (W)670mm X (D)960mm X (H)880mm EC03 2 2 nos 21,240 42,480

Supplying and placing in position of lounge chair upholstered with fire

retardant fabric as per Image. The chair frame is constructed using

pine wood along with soft foam for a comfortable seat. The seat cushion

is made of multi layered foam of density 32-35kg/ m3. The seating

cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength .The chair with contoured shape with

complete back support , padded back and bordered arms. The sofa

having legs of size 50mm x 50mm thk at upper side and 40mm x

40mm thk at bottom side are made out of First Class Teak wood with

pu polish in matt finish. The wooden framing connected with legs at the

bottom of the sofa to be made out of size: 50mm x 50mm thk First

Class Teak with pu polish in matt finish. The solid wood shall be KILN

dried season . Seating height of the chair 425mm from the floor.The fire

retardant fabric is used in the chair having the minimum cost Rs 500

per meter .The pu polish treatment on exposed surface of solid wood

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

102 Centre Table for VVIP lounge & Back Looby

Dimension (W)1140mm X (D)600mm X (H)450mm CT05 1 1 nos 25,650 25,650

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

103 Side Table for VVIP lounge & Back Looby

Dimension (Dia)600mm X (H)460mm ST04 3 3 nos 20,430 61,290

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak of size: 40mm

x 40mm thk in curvature design with pu matt polish. The solid wood

shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

104 Chair for Multipurpose Hall

Dimension: 620mm(L) x 460mm(D) x 960mm(H) CR 04 140 140 nos 16,560 23,18,400

Supplying, and placing in position of auditorium chair as per image . It's

grand, comfortable and intelligent. It's mild curves, lend it a

contemporary look & makes it perfect for every setting. Also depending

on the ambience and your needs, you can cutomize it to suit your style..

Features: 100 % polyester stretch fabric , bonded with 3mm/5mm/7.5

mm foam as required with net backing, seat density: High Density

premium molded foam of density 50 kg/m2, +/-5 Internal configuration:

440 X 490 X 19mm of 19mm plywood of ISI303 Extenal configuration:

580 X 540 X 2.65mm ABS virgin plastic seat shell. Back Density of

38kg/m2+/-5, Internal Configuation: 15mm moulded plywood with pu

foam-730 x 70, top of back to be 90mm, tapering to 110and then to

120mm. External configuration: 780 x 540 x 2.65mm ABS virgin plastic

back shell. , Mechanism:Spring free gravity tip-up, Wings:Metal stand of

200 x 75 x 6mm M.S.Flat, Armrest: writing pad. Base frame: MS/ sturdy

steel frame. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

105 Cocktail Table for Multipurpose Hall

Dimension: 900mm(Dia) X 1200mm(H) MT 01 15 15 nos 21,240 3,18,600

Supplying, and placing in position of cocktail table of as per

image/drawing . The table made out of 18mm thk BWR plywood

(IS:303 grade) with 0.8mm thk post laminate . All working or non

working edges shall be provided with machine pressed 2mm thick PVC

edging using special hot melt glue at hot temperature. The Table top

supported with MS powder coated pole of size: 50mm thk dia with flat

circular plate of size: 200mm thk dia. The product should be complete

as per the reference image and the specification mentioned above

under the guidence of project Architect & Engineer Incharge.

106 Stackable Chair for Multipurpose Hall

Supplying, and placing in position of stackable chair upholstered with

fire retardant fabric as per image. The frame and legs are made of ms

hollow with duly powder coated. The seat cushion is made of foam of

density 32-35kg/ m3 . Seating height of the chair 425mm from the floor.

The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

107 Foldable Table for Multipurpose Hall

Supplying, and placing in position of rectangular foldable table as per

photograph/ drawing. The table top made out of 18mm thk BWR

plywood (IS:303 grade) with 0.8mm thk post laminate . Table top

supported with MS powder coated foldable legs with duly powder coated

. The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

108 Foldable Table for Multipurpose Hall

Dimension: 1200(Dia) x 750mm(H) MT 03 20 20 nos 27,990 5,59,800

Supplying, and placing in position of round foldable table as per

photograph/ drawing. The table top made out of 18mm thk BWR

plywood (IS:303 grade with 0.8mm thk post laminate . Table top

supported with MS powder coated foldable legs with duly powder coated

. The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

109 Podium for Multipurpose Hall

Dimension: 600mm(L) X 600(D) x 1250mm(H) PO 01 4 4 nos 39,060 1,56,240

Supplying and placing in position of podium as per image . Podium of

Size :- L-600mm x D-600mm x H-1250mm as per image. The complete

structure (top, modesty, sides, shelf and drawer) shall be constructed

in 18mm thick BWR plywood (IS:303 grade) with 0.8mm thk post

laminate. The working and non working edges shall be finished with

machine pressed PVC egdge banding. provision of open storage with

one shelf and one drawer with handles and locking arrangement.The

podium to be provisioned with high raised modesty panel and side

panel from the top as per shown in image. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

110 Centre Table for Green Room

Dimension (Dia):750mmx (H)450mm CT 17 2 2 nos 24,030 48,060

Supplying, and placing in position of centre table of as per

image/drawing . The centre table made out of 18mm thk BWR plywood

(IS:303 grade) with 0.8mm thk post laminate . All working or non

working edges shall be provided with machine pressed 2mm thick PVC

edging using special hot melt glue at hot temperature. The Table top

supported with MS powder coated pole of size: 50mm thk dia with flat

circulate plate of size: 300mm thk dia. The product should be complete

as per the reference image and the specification mentioned above

under the guidence of project Architect & Engineer Incharge.

111 Table for Green Room

Dimension(L)3465mm X (D)450mm X (H)750mm TE 02 6 6 nos 50,130 3,00,780

Supplying, and placing in position of table as per Image. The table top

made out of 18mm thk BWR plywood (IS:303 grade) with 0.8mm thk

post laminate . The table top supported with ms powder coated square

shape leg of size 50mm x 50mm Comprising of metal powder coated

connectors of size 40mm x 40mm. The working edges shall be provided

with machine pressed 2mm thick PVC edging using special hot melt

glue at hot temperature. The Table table having a provision of single

drawer with handle. The drawer made out of 18mm thk BWR plywood

with 0.8mm thk post laminate. The product should be complete as per

the reference image including electrical light fixtures and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

112 Revoloving Chair for Green Room

Dimension (W)670mm X (D)660mm X (H)880mm CR 02 6 6 nos 12,150 72,900

Supplying and placing in position of revolving chair upholstered with

leatherette as per image. Upholstery Leatherette: imported quality

tested with 2,00,000 rubs, Leatherette uphlostery in blue colour , Seat

ply 12mm through Gas pump tested till 1'00,000 cycles, class 3 quality,

Chrome base: tested till 1200 kg, and 27" dia Castor's: nylon with

50mm dia, tested till 1200 kgs, and 1,00,000 rotations ,Seat height:

(minimum): 400 mm, Base: MS Chrome plated base with 5 castors,

Mechanism: pneumatic height control. The chair frame is constructed

using pine wood along with soft foam for a comfortable seat. The seat

cushion is made of multi layered foam of density 32-35 kg/ m3. The

seating cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength. The chair with contoured shape with

complete back support , padded back and bordered arms. The

leatherette is used in the sofa having the minimum cost Rs 500 per

meter. The product should be complete as per the reference image and

the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

113 Wardrobe for Green Room

Dimension (W) 1800 mm X (D)1800 mm X (H)2100mm SS 08 2 2 nos 71,190 1,42,380

Supplying and placing in position of wardrobe as per image. Complete

structure (top,bottom, sides, shelf ,drawer) made out of 18mm thk BWR

plywood (IS:303 grade) and covered with 4mm thk natural walnut

veneer with pu matt finish.Outer finish:natural Walnut veneer in Pu matt

Polish ,Internal Finish : 0.8mm laminate as/selection , Hardware :

telescopic channel Legs: round tapered Teak wood finish matching to

veneer as per design ,Moulding: as per design in teak wood Opening

detail: Knobs as approved. The wardrobe having a openable shutter

with shelves ,hanging rod, handles, drawers and locking arrangement

provision as per shown in image. This shall also provided with internal

electrical point with operational system of light on, on opening of shutter.

The pu polish treatment on exposed surface of solid wood/veneer

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

114 Stackable Chair for Green Room

Dimension (W) 565 mm X (D)600mm X (H)790mm SK 01 4 4 nos 1,710 6,840

Supplying and placing in position of armrest stackable chair as per

image. The mid back chair in white. The comfortable chair with a firm

backrest and armrests is easy to move and carry around different

rooms in the house. Best suited for the garden and balcony, get one, a

few or many for your home. Made out of plastic as per shown in image.

The product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

115 Easy Chair for Standard Rooms

Dimension: 700mm(L) x 750mm(D) x 810mm(H) EC 08 38 38 nos 21,060 8,00,280

Supplying and placing in position of arm chair upholstered with fire

retardant fabric as per image. The chair frame is constructed using

pine wood along with soft foam The sofa frame is constructed using

pine wood along with soft foam for a comfortable seat. The seat

cushion is made of multi layered foam of density 32-35 kg/ m3. The

seating cushions have 2.75 & 1.75 inches of elastic webbing/springs for

studyness and comfortable seating . The thread used is nylon bonded to

provide lasting stitch strength. The sofa with contoured shape with

complete back support , padded back and bordered arms. for a

comfortable seat. The seat cushion is made of foam density 35-38kg/

m3 .The seating cushions have 2.75 & 1.75 inches of elastic

webbing/springs for studyness and comfortable seating . The thread

used is nylon bonded to provide lasting stitch strength. The chair with

contoured shape with complete back support , back upholstered with

fabric and cushing . The chair having wooden legs made out of First

Class Teak wood with pu polish in matt finish. The solid wood shall be

KILN dried season . Seating height of the chair 425mm from the floor

.The fire retardant fabric is used in the chair having the minimum cost

Rs 500 per meter . The pu polish treatment on exposed surface of solid

wood should be done in pu matt polish. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

116 Coffee Table for Standard Rooms

Dimension (Dia )750mm X (H)450mm CT 07 38 38 nos 27,990 10,63,620

Supplying, and placing in position of round centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood water

resistant (IS:303 grade) with 4mm thk veneer finish with pu matt polish

and the curvature legs of size 40mm x 40mm thk are made out of

solid wood (First Class Teak) with pu matt polish. The solid wood shall

be KILN dried season .The pu polish treatment on exposed surface of

solid wood/veneer should be done in pu matt polish. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

117 Study Chair

Dimension: 500mm(L) x 550mm(D) x 820mm(H) SC 01 38 38 nos 13,320 5,06,160

Supplying and placing in position of study chair upholstered with fire

retardant fabric as per image. The chair frame is constructed using

pine wood along with soft foam for a comfortable seat.The seat cushion

is made of foam of density 32-35kg/ m3 . The seating cushions have

2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength. The chair arms and front legs of size: 40mm x 40mm at

upper side and 30mm x 30mm at bottom side are made out of solid

wood (First Class Teak) with pu polish in matt finish and the back legs

of size: 40mm x 40mm thk are made out of solid wood (First Class

Teak) with pu polish in matt finish. The solid wood shall be KILN dried

season . Seating height of the chair 425mm from the floor. The fire

retardant fabric is used in the chair having the minimum cost Rs 500

per meter . The pu polish treatment on exposed surface of solid wood

should be done in pu matt polish.. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

118 Study Table for Standard Rooms

Dimension: 1160mm(L) x 600mm(D) x 750mm(H) T 02 38 38 nos 24,210 9,19,980

Supplying and placing in position of study table as per image.Comple

Structure : Table top and one drawer made out of 18mm BWR

Plywood (IS:303 grade) covered with 4mm thk veneer with pu matt

polish. The legs of size: 40mm x 40mm thk at upper side & 30mm x

30mm thk at bottom side are made of solid wood (First Class Teak)

with pu polish in matt finish, Internal surface covered with 0.8mm thk

laminate as desired/approved. The solid wood shall be KILN dried

season . The pu polish treatment on exposed surface of solid wood

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

119 TV Console for C 08

Dimension: 1500mm(L) x 450mm(D) x 750mm(H) 38 38 nos 38,160 14,50,080

Supplying and placing in position of console Table as per image. The

structure of console unit shall be made of solid wood (First Class Teak) .

The solid wood shall be KILN dried season . The top made up of 32mm

thk solid wood ( First Class Teak) with pu polish in matt finish and the

curvature legs are made out of 40mm x 40mm thk at upper side &

30mm x 30mm thk at bottoam side are made out of solid wood (First

Class Teak) with pu polish in matt finish. The console unit having a

provision of one single drawer with knob handle. The pu polish

treatment on exposed surface of solid wood should be done in pu matt

polish. The product should be complete as per the reference image and

the specification mentioned above under the guidence of project

Architect & Engineer Incharge.

120 Luggage Rack LR 01

Dimension: 1050mm(L) x 600mm(D) x 750mm(H) 38 38 nos 22,500 8,55,000

Supplying and placing in position of Luggage Rack as per photograph.

The structure (top,sides , bottom ) made out of 18mm thk BWR

plywood (IS:303 grade) with 4mm thk natural walnut veneer with pu

matt finish. Outer finish: natural walnut veneer in pu matt polish. Inner

Finish: 0.8mm thk laminate. legs: round tapered First Class Teak wood

finish matching to veneer as per design in First Class Teak. Moulding:

as per design in First Class Teak wood. The pu polish treatment on

exposed surface of solid wood/veneer should be done in pu matt polish.

Hardware : SS Solid Strip (U Bend) of 12x6 mm inlayed. The product

should be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Incharge including Dado panel at back and one side or as required.

121 Fridge Cabinet FC 01

Dimension: 605mm(L) x 460mm(D) x 762mm(H) 38 38 nos 11,700 4,44,600

Supplying and placing in position of fridge unit as per image. Complete

structure (top,bottom, sides and shutter) made in 18 thk BWR Ply wood

(IS:303 grade) and exposed surface covered with 4mm thk natural

walnut veneer with pu matt finish , Internal Finish : 0.8mm laminate

as/selection, Hardware telescopic channel, Louvered shutter panel for

ventilation in First Class Teak wood , Moulding: as per design in First

Class Teak wood Opening detail: Knobs as approved.The pu polish

treatment on exposed surface of solid wood/veneer should be done in

pu matt polish.. The product should be complete as per the reference

image and the specification mentioned above under the guidence of

project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

122 Double Bed for Standard rooms B 02

Dimension: 1910mm(L) x 2082mm(D) x 1050mm(H) 36 36 nos 58,140 20,93,040

Supplying and placing in position of double bed as per photograph.

Complete structure ( headboard frame, tail board frame and

side frame) made out of 18mm thk BWR plywood (IS:303 grade) and

exposed surface covered with 4mm thk natural walnut veneer with pu

matt finish.Plinth & bottom made out of 12mm thk BWR plywood to

be finished with french polish. Support to be made with 50mm x 50mm

thk solid wood horizontal & vertical members. Legs made of 50mm x

50mm thk round First Class Teak wood tapered as per shown in image.

moulding as per shown in image are made of First Class Teak wood .

The pu polish treatment on exposed surface of solid wood/veneer

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

123 Single Bed for Standard rooms B 02A

Dimension: 960mm(L) x 2082mm(D) x 1050mm(H) 12 12 nos 31,500 3,78,000

Supplying and placing in position of Single bed as per photograph.

Complete structure ( headboard frame, tail board frame and

side frame) made out of 18mm thk BWR plywood (IS:303 grade) and

exposed surface covered with 4mm thk natural walnut veneer with pu

matt finish.Plinth & bottom made out of 12mm thk BWR plywood to

be finished with french polish. Support to be made with 50mm x 50mm

thk solid wood horizontal & vertical members. Legs made of 50mm x

50mm thk round First Class Teak wood tapered as per shown in image.

moulding as per shown in image are made of First Class Teak wood .

The pu polish treatment on exposed surface of solid wood/veneer

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

124 Bed Side Table for Standard rooms

Dimension: 500mm(L) x 500mm(D) x 500mm(H) ST 06 76 76 nos 16,200 12,31,200

Supplying and placing in position of bed side table as per photograph.

The bed side table structure (top,sides , bottom, drawer ) made out of

18mm thk BWR plywood (IS:303 grade) with 4mm thk natural walnut

veneer with pu matt finish. Outer finish: natural walnut veneer in pu

matt polish. Inner Finish: 0.8mm thk laminate. Hardware: telescopic

channel, legs: round tapered First Class Teak wood finish matching to

veneer as per design in First Class Teak. Moulding: as per design in

First Class Teak wood. The pu polish treatment on exposed surface of

solid wood/veneer should be done in pu matt polish. The product should

be complete as per the reference image and the specification

mentioned above under the guidence of project Architect & Engineer

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

125 Wardrobe for Standard Rooms

Supplying and placing in position of wardrobe as per image. Complete

structure (top,bottom, sides, shelf ,drawer) made out of 18mm thk BWR

plywood(IS:303 grade) and covered with 4mm thk natural walnut

veneer with pu matt finish.Outer finish:natural Walnut veneer in Pu matt

Polish ,Internal Finish : 0.8mm laminate as/selection , Hardware :

telescopic channel Legs: round tapered First Class Teak wood finish

matching to veneer as per design ,Moulding: as per design in First Class

Teak wood Opening detail: Knobs as approved. This shall also provided

with internal electrical point with operational system of light on, on

opening of shutter. The pu polish treatment on exposed surface of solid

wood/veneer should be done in pu matt polish. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Elevation Area to be measured

126 Sofa for Delux Rooms (3 seater)

3 seater Dimension (W)1970mm X (D)960mm X (H)880mm S 03A 68 68 nos 50,130 34,08,840

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per meter

.The pu polish treatment on exposed surface of solid wood should be

done in pu matt polish. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

127 Arm Chair for Delux Rooms

Dimension (W)670mm X (D)660mm X (H)880mm EC 03 136 136 nos 21,240 28,88,640

Supplying and placing in position of sofa upholstered with fire retardant

fabric as per Image. The sofa frame is constructed using pine wood

along with soft foam for a comfortable seat. The seat cushion is made

of multi layered foam of density 32-35kg/ m3. The seating cushions

have 2.75 & 1.75 inches of elastic webbing/springs for studyness and

comfortable seating . The thread used is nylon bonded to provide lasting

stitch strength .The sofa with contoured shape with complete back

support , padded back and bordered arms. The sofa having legs of

size 50mm x 50mm thk at upper side and 40mm x 40mm thk at

bottom side are made out of First Class Teak wood with pu polish in

matt finish. The wooden framing connected with legs at the bottom of

the sofa to be made out of size: 50mm x 50mm thk First Class Teak

with pu polish in matt finish. The solid wood shall be KILN dried season

. Seating height of the sofa 425mm from the floor.The fire retardant

fabric is used in the sofa having the minimum cost Rs 500 per

meter.The pu polish treatment on exposed surface of solid wood should

be done in pu matt polish.. The product should be complete as per the

reference image and the specification mentioned above under the

guidence of project Architect & Engineer Incharge.

128 Centre table for Delux Rooms

Dimension (W)1140mm X (D)600mm X (H)450mm CT 08 68 68 nos 25,740 17,50,320

Supplying, and placing in position of oval centre table as per image.

The table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and the legs are made out of solid wood (First Class Teak) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

129 Side table for Delux Rooms

Dimension (Dia)600mm X (H)460mm ST 07 136 136 nos 20,340 27,66,240

Supplying, and placing in position of side table as per image.The side

table top and shelf made out of 18mm thk BWR plywood (IS:303

grade) water resistant with 4mm thk veneer finish with pu matt polish

and legs are made out of solid wood (First Class Teak ) of size:

40mm x 40mm thk in curvature design with pu matt polish. The solid

wood shall be KILN dried season . The pu polish treatment on exposed

surface of solid wood/ veneer should be done in pu matt polish. The

product should be complete as per the reference image and the

specification mentioned above under the guidence of project Architect

& Engineer Incharge.

130 TV Console For Delux Rooms

Supplying, and placing in position of back credenza @ 750mm height

as per photograph/drawing . Storage unit having Openable shutters with

shelf and 2 nos drawer provision as per shown in image. The modular

storage unit top shall be made from 18 mm thick BWR plywood (IS:303

grade) with post laminate and rest of the sides as well as shelves and

shutter, drawer to be made up of 18 mm thick BWR plywood with post

laminate while back to be made of 8 mm thick BWR plywood with post

laminate . All edges to be provided with 2 mm thick PVC lipping. . The

storage unit having metal/ss legs. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

131 Double Bed for Delux Rooms

Supplying and placing in position of double bed as per photograph.

Complete structure ( headboard frame, tail board frame and

side frame) made out of 18mm thk BWR plywood (IS:303 grade) and

exposed surface covered with 4mm thk natural walnut veneer with pu

matt finish.Plinth & bottom made out of 12mm thk BWR plywood to

be finished with french polish. Support to be made with 50mm x 50mm

thk solid wood horizontal & vertical members. Legs made of 50mm x

50mm thk round First Class Teak wood tapered as per shown in image.

moulding as per shown in image are made of First Class Teak wood .

The pu polish treatment on exposed surface of solid wood/veneer

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty

132 Single Bed for Delux rooms B 02A

Dimension: 960mm(L) x 2082mm(D) x 1050mm(H) 12 12 nos 31,500 3,78,000

Supplying and placing in position of Single bed as per photograph.

Complete structure ( headboard frame, tail board frame and

side frame) made out of 18mm thk BWR plywood (IS:303 grade) and

exposed surface covered with 4mm thk natural walnut veneer with pu

matt finish.Plinth & bottom made out of 12mm thk BWR plywood to

be finished with french polish. Support to be made with 50mm x 50mm

thk solid wood horizontal & vertical members. Legs made of 50mm x

50mm thk round First Class Teak wood tapered as per shown in image.

moulding as per shown in image are made of First Class Teak wood .

The pu polish treatment on exposed surface of solid wood/veneer

should be done in pu matt polish. The product should be complete as

per the reference image and the specification mentioned above under

the guidence of project Architect & Engineer Incharge.

133 Bed Side Table for Delux Rooms

Dimension: 500mm(L) x 500mm(D) x 500mm(H) ST 06 136 136 nos 16,200 22,03,200

Supplying and placing in position of bed side table as per photograph.

The bed side table structure (top,sides , bottom, drawer ) made out of

18mm thk BWR plywood(IS:303 grade) with 4mm thk natural walnut

veneer with pu matt finish. Outer finish: natural walnut veneer in pu matt

polish. Inner Finish: 0.8mm thk laminate. Hardware: telescopic channel,

legs: round tapered First Class Teak wood finish matching to veneer as

per design in First Class Teak. Moulding: as per design in First Class

Teak wood. The pu polish treatment on exposed surface of solid

wood/veneer should be done in pu matt polish.. The product should be

complete as per the reference image and the specification mentioned

above under the guidence of project Architect & Engineer Incharge.

Tag as per Ground First Third Sixth CJ/CS Camp Chief Minister/ Total

S.No. Specifications Std. Room Delux Room Unit Rate In Rs Amount

drawing Floor Floor Floor Floor office Governor Qty