Construction 2 Nos. Type-IV Quarters for Animal Husbandry Department at Hamirpur H.P.

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

(a) Group-B

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

(a) Group B

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

a) 2 x 1.5 sqmm

b) 2 x 10 sqmm

Supplying and drawing following size of PVC insulated, heat resistant .flame retardant (HRFR) and low smoke single core (flexible ) copper conductor cable in existing surface / recessed. Steel / PVC conduit as required.

a)3 x 1.5 Sqmm

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing of following size of PVC conduit along with the accessories in surface recess including painting in case of surface conduit or cutting the walls and making good the same in case of recessed conduit as required .

a) 25 mm dia

b) 50 mm dia

Supplying and fixing following rating Modular switch / socket in the existing switch box / cover plate including connectons etc. as required. . .

a) S.P.5/6 Amps one way modular switch

b) 5 Pin 5/6 Amps modular socket outlet

c) TV modular socket outlet

Supplying and fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess etc.as required . .

a)2 modules ( 78 mm x 78 mm x 50 mm )

b)4 modules (140 mm x 78 mm x 50 mm )

Supplying & fixing Modular blanking plate on the existing modular metal box as required.

Supplying and fixing G.I modular box of ( 140 mm x 78 mm x 50 mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 modular switch connections etc as required .

Supplying and fixing G. I. Modular box of ( 140 mm x 78 mm x 50 mm ) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps ,modular switch,connections etc as required

Supplying and fixing bakelite batten /angle holder including connections etc .as required.

Supplying and fixing Ding Ding/ Electronic Musical bellsuitable for DC/AC single phase 230 volts complete as required .

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units 7 no energy meter box, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- a) 300 mm deep (nominal)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.

a) Single pole Cat-A

Supplying and fixing following rating double pole .240.volts isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required. a) 63 Amps Cat –A

Supplying and fixing following rating double pole ( single phase & neutral 240 voltsresidual current circuit breaker ( RCCB ) having a sensitivity current upto 300 miliampers in the existing MCB DB complete with connections , testing and commissioning etc. as required. . a) 63 amps Cat.-A

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

a)Double door 4 way

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

a) Double door-8 way (8+24),horizontal type

Earthing with G.I earth pipe 4.5 mtr. long and 40 mm. dia, including accessories and providing masonary enclosure with cover plate having locking arrengement and watering pipe etc. (but without charcoal or coke and salt) complete as required

Extra for using salt and charcoal for pipe earth electrode complete as required .

Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for earth electrode conductor ,including soldering etc as required .

Providing and fixing M.V danger notice plate of 200 mm x 150 mm made of mild steel,at least 2 mm thick and vitreous enameled white on both sides, and with inscriptionetc. as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to b00e laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering. .

a) Armoured cable 16 Sqmm (twin core)

Providing , laying and fixing of one no aluminium conductor PVC insulated and PVC sheathed armoured / XLPE power cable working voltage 1100 volt grade on surface etc. of the required size.

a)Armoured cable 16 Sqmm (twin core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required. .

a) 10 Liter capacity water heater (Cat-A)

b) 25 Liter capacity water heater (Cat-A)

Providing and installation of exhaust fan of following sizes in the existing opening .including making the hole to suit the size of the above fan making good the damages connections. testing and commissioning etc. as required. .

a)Exhaust fan light duty. Domestic) 300mm sweep

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. .

a) Ceiling fan 1200 mm sweep,Category-A

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. .

a) Fixed type wall bracket 150 dia, single lamp.(Category-A)

Supplying and fixing of Extruded Aluminium batten of 5 watt,anodised extruded aluminium housing high transmissitivity diffuser and high lumen output ( ordering code BCLSBAL 5 Watt white) Bajaj or its equivalent make complete in all respect with connections as required or as approved by the engineer incharge.

(a) Mirror light

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No.thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. .

a) Bulk head fitting, CFL type (Category-A)

Supplying and fixing of Extruded Aluminium batten of 20 watt,anodised extruded aluminium housing high transmissitivity diffuser and high lumen output ( ordering code BCLSBAL 20Watt white) Bajaj or its equivalent make complete in all respect with connections as required or as approved by the engineer incharge .

Supplying and fixing of sleek surface mounted round LED down lighter with Al die cast body finish with drop down PC diffusre to deliver low glare illumination with optiimized heat sink for efficient heat dissipation LED 12 watt ( ordering code BGSLO SLEEK suface 12 Watt 6000 K white) Bajaj or its equivalent make complete in all respect with connections as required or as approved by the engineer incharge .

Providing and fixing efficient led surface 1X1 luminaire to anhance the delight of accupants with comfertable experience through its clasic design & glare free soft illumination product code BZSSQL18W WH LED of bajaj or equivalent make as required and approved by the Engineer -in -charge .

Supplying and fixing of M.S.fan box (18 x 10 x 10) cm with phinolic laminated sheetcover in the front of M.S round 16 mm / 12 mm dia 60 cm long including connection complete in all respect as required or approved by the engineer incharge at site.

Supplying and fixing LED lamp 10 watt of Bajaj / Havells or its equivalent as required.

Supplying and fixing louvers/shutters for exhaust fan 300 mm as required or asapproved by the engineer incharge.

Providing and fixing of ENDURA SUNDOWN New generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover hav product code ENDURASUNDOWNSL 25WLED765 PASYBOPCIHD Havells or its equivalent make complete in all respect with connections as required or as approved by the engineer incharge . with 1 Meter G.I. bracket for holding the light complete in all respect with connections as required or as approved by the engineer incharge .

Providing and fixing of TISVA LED BED light GASCA 4 Watt odering codeWL-1471 LED of TISVA Make or equivalent make complete in all respects including connections as required and approved by the engineer incharge.

anil kumar govt. contractor

AJAY KUMAR GOVT CONT

pankaj saini