GE 874/EWS-65/2022-23

Amount

B/R and E/M Portion

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L Hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete 1:4:8 type D 2 ( 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Cement concrete in foundations filling and mass concrete 1:3:6 type C 2 ( 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm all as specified and directed.

M&L Damp proof course in plain cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork using WPC as per manufacturer's instructions complete all as specified and directed.

Supply only liquid water proofing compound.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick on ceiling surfaces in CM 1:3, complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Plain Cement concrete 1:4:8 type D 2 ( 40mm graded stone aggregate) as in sub base filling complete all as specified and directed.

M&L 75 mm thick in plain Cement concrete 1:3:6 type C 2 ( 40mm graded stone aggregate) as in sub base filling complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).

M&L for RCC 1:2:4 type B1 (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for prepration of new plastered surface of wall and applying three coat of white wash complete all as specified and directed.

All as per above but on celling complete all as specified and directed.

M&L for prepration of new plaster surface of wall and applying two coat of colour wash complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum wt 90 gm) complete all as specified and directed.

M&L for galvanised steel tube medium grade 15 mm dia fixed to wall or celing or laid under floor, complete with necessary fitting all as specified and directed.

M&L for CI nahani trap 75 mm dia with grating including Each joint to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm45gms /25mm- 65gms.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the sufrace complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the sufrace complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Rotational moulded polyethylene 1000 Ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1

Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

PVC Connection 15 mm size PTMT Nut of length 600 mm.

S&F Waste pipe coupling of PTMT (Half of full thread ).(minimum weight 32mm 45gm/40gm-60gm).

S&F Grating doom 100 mm dia of PTMT (Minimum weight 25gms).

Construction of 10 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-1080/2011 Sheet 1/1 dated 01.12.2011.

M&L 150mm dia SGSW pipe laid in trenches and jointed all as specified.

M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.

Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size as approved by Eng-in-charge, confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment complete all as specified.

Sand filling under interlocking paver block including watering and consolidation complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb or mud stops rounded or chamfered on edges all as specified for copping, including weathering slightly rounded or chamfered using form work (including form work Straight or curved).

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.

Supply and fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 10 watt. Make : Havells/Anchor/Siska/Philips/Bajaj

Supply and LED 10 Watt Bulb with E22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above.

S&F Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips

S&F Sheet metal enclosure factory made for DBs Single pole and neutral Single door 415 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/lEGRAND/SSK.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and neutral 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Havells/Legrand/Philips.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : Havells/Legrand/Philips.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 4 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells / Anchor / Polycab / Plaza.

M/S SAJAA CONSTRUCTION COMAPNY

M/S MOHD YOUSUF CONSTRUCTION CO

M/S AB AHAD RATHER

M/S MUNEER AHMAD WANI CONSTRUCTIONS

G N T CONSTRUCTION CO

Bidder Name

M/S AB AHAD RATHER

M/S SAJAA CONSTRUCTION COMAPNY

G N T CONSTRUCTION CO

M/S MUNEER AHMAD WANI CONSTRUCTIONS

M/S MOHD YOUSUF CONSTRUCTION CO

M/S AKHLAQ ENTERPRISES