CWE/HSR/ALW-01 OF 2021-22 ADDITION/ALTERATION INCL REPAIRS TO MARRIED ACCN AT ALWAR MIL STN

Amount

B/R ITEMS Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed by Engr-in-Charge and as specified.

Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials as directed by Engr-in-Charge and all as specified.

Demolition of cement concrete (reinforced) in landing slab ,chullah hoods ,manhole covers , Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.

Demolition of existing lime concrete/PCC padding, roof treatment of any thickness laid over RCC roof/Chajjas etc removing complete layer of bitumen under cocnrete/PCC padding, cleaning and washing of roof with water to remove dust etc as preparation to receive treatment all as directed and specified.

Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 but each complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified & directed.

Taking down shutters of any description exc 2 sqm each complete all as specified & directed .

Taking down shutters of any description exc 1 sqm & n exc 2 sqm each complete all as specified & directed .

Taking down of shutter and refixing exc 1 sq. m and n exc 2 sq. m each

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc,laid , bedded and pointed in any mortar all as specified & directed.

Cutting holes into stone wall built in cement mortar or cement lime mortar for inserting hold fast and making good dismental portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n exc one brick as required all as directed by Engr-in-Charge.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses masonry built in cement mortar or cement lime mortar all as directed.

M&L for 50mm thick PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in flooring/foot path finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 12.5mm graded aggregate) as in levelling coarse of floors.

S&F 38 mm thick glass dividing strips , 3 mm thick and inserted in position to conform to design

M&L for 75 mm thick PCC 1:4:8 Type D-2 (using 40 mm graded stone agg ) as in sub base of roof/floor/pavings/path etc

M&L for Providing cement concrete type B-0, 1:2:4 (using 12.50 graded stone aggregate) as in padding and levelling course on roof and floor complete all as specified & directed.

M&L Cement cocnrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in plinth protection 75mm thick and surface to be finished even and smooth without using extra cement.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm height kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating as directed.

Providing precast cement concrete 1:2:4 type B-1 as in landing, cover slabs (for manholes etc) Chajjas, water troughs, managers, shelves and SImilar article with plain faces.

M&L plain cement concrete 1:2:4 type B0 in roof kerbs or mud stops, rounded or chamfered on edges

M&L 15mm thick cement plaster on external surface in two layer first layer of 10 mm th in CM 1:6 and 2nd layer 5 mm thick in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even all as specified & directed.

Supply only water profing compound as per IS-2645.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement persquare metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement

M&L for 10 mm thick screed bed on fair faces of concrete/brick surfaces in CM 1:4 with water proofing compound @ 3 % of wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after)

M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement.

M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7 mm thick over 10 mm rendering in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed. complete all as specified & directed..

M&L for Vitrified Ceramic tiles(dark shade / double charged / ultra charged ) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as on vertical surfaces over 10 mm rendering in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.

M&L for Vitrified Ceramic tiles(dark shade / double charged / ultra charged ) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. laid over 10 mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over 10 mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.laid over 10 mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick as in floor,cooking platform, treads etc .laid over 20 mm screed bed or bedding layer in CM 1:3 set and jointed in neat cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing by machine complete all as specified and directed by Engr-in-charge

M&L for machine cut Kota stone 16-18 mm thick as in riser of steps, skirting, dado and pillar set over 10 mm rendering in CM 1:3 and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified by Engr-in-Charge.

M&L for 20-25 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm screed bed or bedding layer in CM 1:3 complete all as specified and directed.

M&L for machine cut 25 to 30 mm thick kota stone in single piece as in shelves and similar works laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including ball nosing of exposed edges and including dismantling old stone slabs complete all as specified and directed

S&F 18/19mm thick exterior grade prelaminated particle board(Prelaminated on one side) with decorative choice lemination and other side balancing white lemination fixed with screws to timber frame work/shutters complete all as specified. .

S&F Rajshree brand factory made PVC shutter Cabinet of required size, fabricated by joining for 18mm thick PVC Celuka ply with prelaminated sheet on one side cut to desired size of shutter and fixed with frame as in cabinet boxes with shelf and shuttr full size fitted under or above the kitchen cooking plateform incl all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding any description. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per specification. The measurement area shall be front elevation.

S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face covered with deco rative face veneer with lipping/frame to match commercial type on both sides with self closing circular knob for locking arrangemen all as specified and directed.

M&L for factory made 2nd class glazed and skelton door shutter made out of stiles & rails of 35mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with and mitred beads for securing glass etc compelte, the SIze of members of shutter shall be as per IS-1003. The shutter shall be fitted to the chowkhats as directed by Engr-in-Charge.

S&F 35mm thick 2nd class hard wood factory made plain, framed,panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply seasoned & chemically pressure treated/12mm veneered, particle board with commercial veneering on both faces. The SIze of rail & steel as per IS : 1003 (Part I) kiln seasoned & chemically pressure treated.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made box type steel window with side hung shutter including box type hinges with steel handles and steel peg stays complete with glazing bars dovetailed or welded all as specified and directed

S&F factory made box type steel window with side hung shutter including box type hinges with steel handles and steel peg stays complete without glazing bars dovetailed or welded all as specified and directed

S&F factory made box type steel ventilator with top hung shutter incl hinges, peg stay complete all as specified and directed

S & F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading complete all as specified & directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading complete all as specified & directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5. sq m in each panes complete all as specified & directed.

S&F 4mm thick sheet glass figured and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding fixed in repair.

Supply and fixing PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked.

S&F in repair 15mm dia bib tap cast coper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed as fixed in repair.

S&F in repair 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed in repair.

S&F in repair swivel shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

S&F 15mm dia concealed stop valve/angle valve of copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed in repair.

S & F in repair vitreous china wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F WHB flat ack of SIze 580x450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete.

S&F 32 mm dia PVC flexible waste pipe for WHB/Sink 600 mm long with PVC coupling all as directed fixed in repair..

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed on wall with PVC rawl & cadmium plated brass screws complete all as specified & directed

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore pipe.

Refixing old steel tubing and connection in new or old poSItion (walls,ceiling,floor etc) bore of pipe in 20mm dia.

S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floors of 20 mm bore.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipe.

Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 15mm dia.

S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm.

S&F in repair SInks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all SIze 915mmx460mm bowl SIze 410mmx330mmx160mm.

Stop valves 20mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed

Dismantling of water tanks of capacity exc 250 but n exc 500 ltrs & removing to stores complete all as specified & directed.

Dismantling of water tanks of capacity exc 500 but n exc 1000 ltrs & removing to stores complete all as specified & directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-I complete all as specified & directed .

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-I complete all as specified & directed .

S& Fixing in repair ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Min wt 40 gms) all as specified and directed

S&F Mirror cabinet (PTMT) fixed on wall with cadmium plated brass screws all as directed. Make :- Commander (Jasmine) / Prayag (Cat Part No. 551)

S&F in repair chromium plated brass toilet paper holder, complete all as specified.

S&F in repair brass chromium plated soap dish, complete all as specified.

M&L for in repair CP brass jet assembely for EWC with PVC connection as reqd complete.

S&F in repair brass chromium plated towel ring incl a pair of CP brass bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pan ( EWC ).white ( ISI marked ) including connection to drain ( Or out goging pipe )and to flushing pipe antisyphonage pipe etc. & with plastic WC seat cover (white) closed pattern

S&F Brass CP mixer for WHB/Sink for mixing hot & cold water screwed down for iron pipe and fixed in repairs

S&F(in repair) Tuffened corner acrylic shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified.

S&F in repairs health fusset chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC complete all as specified & directed by Engineer-in-Charge.

S&F in repairs 15mm bore Two way Angle valve chromium plated screwed plated screwed down,high pressure with capstan heads screwed both ends for iron pipe or for union.

S&F in repairs 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.

S&F Brass CP wall mixer 3 in 1 with L-Bend mixing hot & cold water screwed down for iron pipe and fixed in repairs

S&F UPVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings

S&F UPVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings

S&F UPVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings

S&F UPVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings

S&F UPVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia.

S&F UPVC (SWR) bend 75mm bore of any radius

S&F UPVC (SWR) bend 75mm bore of any radius with access door

S&F UPVC (SWR) bend 110 mm bore of any radius

S&F UPVC (SWR) bend 110 mm bore of any radius with access door

S&F UPVC (SWR) PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal with access door

S&F UPVC (SWR) PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal with access door

S&F UPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door

S&F UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 110 mm bore with access door

S&F UPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 75 mm bore with access door

S&F UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 75 mm bore with access door

S&F UPVC (SWR) vent cowl 110 mm

S&F in repair 110 mm stack clamp out of 50mmx 5 mm flat iron and 16 mm dia round iron stays incl bolts and nuts and securing ends of stays to walls or roof etc, complete all as specified and directed.

S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

S&F in repairs salt glazed stone ware gully trap square or round mouthed type 'P' of size 150 x 150 mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C1 block 30x30x45cm together with necessary form work, excavation & earth work in soft/loose soil, complete, all as specified and as directed.

S&F in repair Hasp and staple, 75mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified.

S&F in repair Contineous piano hinges mild steel bright finish or electrogalvanised width of flaps (when opened) 30 mm complete all as specified.

S & F in repairs 100mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified.

S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified and directed.

S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long

S&F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.

S&F MS sliding door bolt with hasp and staples type, 300mm long stove enamelled black with bright bolt not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple plate and fixed all as specified.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked.

S&F MS barel tower bolt 200mm long stove enamelled black with bright bolt & fixed.

S&F MS pressed bow handle of 150m size oval type stove enamelled black all as specified.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,with vulcanised rubber piece.fixed in floor as directed

S&F GI 32 mm dia pipe 500 mm long as in spout pipe from sunken floor to external surfaces including cutting brick wall/RCC/ PCC and making good in CM 1:3 pipe all as specified and as directed.

S& F in repair stainless steel plate rack out of 1.00 mm thick sheet of size 900 x 750 mm and depth of shelves 230 mm with partition for small /large plates made out of stainless steel 24 gauge all as per sample to be hanged on wall by the help of steel screws grouted in walls with rawl plug design as approved by GE/Kept in GE Office

M&L for pressed steel shutter 1mm thick including pressd steel frame of 1.25 mm thick sheet,12mmdia M S rod for locking , two nos chromium plated handle and one mortise pattern lock inclu two coats of spary painting over a coat of shop primer complete all as shown on drg no TD/2004/29 sheet no 1/3 to 3/3

S&F(in repair) harrison rails, mild steel, chromium platd curtain rod with fixing bracket, stops, rollers etc complete all as specified and directed.

S&F in repairs Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed

M&L for 50mm thick sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc not exc 2m in length, punched dressed on face and along exposed edges, self faced on the other SIde and set and pointed in cement mortar 1:4 complete.

M&L for TMT bars 10mm dia and over cut to length to shape required including cranking, bending spirally or hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia all as specified.

-Ditto- all as per item above but 6mm to 8mm dia TMT bars.

Excavating in trenches n exc 1.50m in width and n exc 1.50m in depth for foundation, manholes etc as well as n exc 10 sqmm on plan area and getting out in soft/loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm thick in soft/loose soil.

Removing excavated soil to a distance exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mean radius, built in CM 1:6.

Dismantling boarding any description (board/plywood) fixed in any position with nails, complete all as specified

S&F frame work such as grills,gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks & SImilar work conforming to Fe-290 Gde E-165.

M&L flat iron as in hold fast welded to angle iron door/window frames as directed.

M&L for framed work as in doors or gates angle or other covering door etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging dor fittings (excluSIve of steel or othr covering, running rails and guides) and hanging also fastening and fixing complete conforming to FE-290 Gde E-165.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment over and including 25 to 30mm thick sand cushioning layer complete.

M&L water proofing treatement to RCC roof slabincluding parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. NOTE : Bituminous primer shall be 'TANK MASTIC' manufactured by M/S STP Ltd or 'EMW FLATE' M/S Texas India Ltd (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 150 gms per sqm polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flushing.

Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by EIC. (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.(WPC will be measured and paid seperately). (iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (v) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. (WPC will be measured and paid separately.) on top (vii) M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair.(WPC will be measured and paid seperately) (screed bed to receive . Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered.

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified..

S&F for preparation of new steel surface/old untreated of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly wooden surfaces/old untreated of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified and directed.

M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint (of approved shade) all as specified and directed.

M&L for preparing newly plastered surfaces & applying two coats of oil emulsion distempering(OBD) over and including a coat of white wall care putty 2 mm thick over a coat of primer on walls

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 2 mm thick complete.over a coat of primer .

M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling.

M&L for preparation of old surrfaces and applying two coats of white wash on ceiling.

M&L for preparation of old surfaces of wall and applying two coats of white wash on wall.

M&L for preparing newly plastered surfaces & applying three coats of white wash on walls.

M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall.

M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer complete as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs etc for rough finished concrete surface complete all as specified and directed.

M&L for form work to SIdes for slabs and SIdes of RCC/PCC bands in walls, horizontal or sloping and SImilar work exc 10 cm but n exc 20 cm wide for fair finished concrete surface complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 usIng 20mm graded crushed stone aggregate as in rof, floor, slabs supported on walls.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L for machine cut 20 to 25 mm thick Green Marble stone slab in single piece as in shelves, cill, etc and similar works laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ball nosing of exposed edges and including dismantling old stone slabs complete all as specified and directed

S&F anodised aluminium grill of approved pattern for windows / ventilators / doors / complete all as specidied and directed

Cutting Chases exe 10 cm but n exc 20cm in girth in brick wall for fixing of PVC Pipe/GI pipe of 15 & 20 mm bore (concealed in wall) including makink good surface in CM (1:6) & to match with the existing surfacees.

M & L for providing Post Construction Antitermite Treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron with cement mortar 1:2 (1 cement 2 coarse sand ) complete all as specified and as directed.

M & L for Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.

M & L for Anti termite treatment of voids in masonry, alongwith wall below concrete or masonry apron using emulsion @ one litre per holes,soil under existing floors using emulsion @ one litre per hole, including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.

M & L for Anti termite treatment at point of contract of wood works by chemical (in oil or kerosene based solution @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. Complete all as specified and as directed.

M&L and applying two or more coats of 2 component size based eposy rust preventer (Nitozine Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete. Note :- Qty of zine based eposy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.

M&L for taking down and removed of loose/disintegrated olf concrete/plaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e Nitobond SBR-45) in protection I (Nitobond SBR-45) : I (water) : 3 (OPC) by volume with the brushes etc to bind new cement plaster/polymer modified plaster/concrete/screed concrete with old surface etc complete.

M&L for applying 15mm thick plaster with polymer modidied mortar fortified with SBR (Nitobond SBE 45) in protection 1:3 weight 5 litres Nit bond SBR-45 to added to 50 Kg cement with 13 litres water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike complete.

E/M Items Taking down carefully copper/Aluminium point wiring for one light/fan/socket/power point and taking down of teak wood batten / PVC casing caping and making good disturbed surfaces of walls/ceilings /floors etc incl dismentling of fittings.

Material and labour for point wiring completer with 1.5 Sqm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxed etc fixed concealed/recessed in wall or ceiling etc including 1.5 mm FRLS PVC insulated unsheated copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white / colored top sheet cover 3.0 mm thick for one light point controlled by one way switch.concealed provision to be made if it is not exist.

All as per item No. 2 here-in-before but for one fan point controlled by one switch and regulator

All as per item No 2 here-in-before but for one bell/buzzer point controlled by one bell push

All as per item No. 2 here-in-before but for one light point controlled two ,two way switch

All as per serial item No. 2 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 2 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No.2 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

All as per serial item No.2 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour for AC complete all as specified & directed.

S&F switch piano flush type single pole one way, 5/6 amp 250 Volts , Module type.

S&F switch piano fulsh type , single pole, two way 5 Amps 230 Volts, modular type

S&F switch piano flush type single pole one way, 15/16 amp 250 Volts , Module type.

S&F socket outlet for 2& 3 pin 6 amp flush type 240 Volts , Module type.

S&F socket outlet for 2 in 1, 3 pin 6 & 16 amp, 240 Volts , Module type.

S&F bell push flush type 5 Amps 240 Volt, Modular type

S&F multi music type AC 230 volts single pole , modular type

S&F PVC white cover plate with frame 2 Module.

S&F PVC white cover plate with frame 3 Module.

S&F PVC white cover plate with frame 4 Module.

S&F PVC white cover plate with frame 6 Module.

S&F PVC white cover plate with frame 8 Module.

Supply and fixing ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

Supply and fixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and fixing Adore LED lamp of 9/10 watt including taking down old u/s CFL lamp complete all as specified & directed. Make :- Havells cat part No. LHLDERHEML8X010 or equivalent of Philips / Crompton Greaves / Wipro/Bajaj

fixing only exhaust fan complete of 300 mm sweep 240V AC including provision of hole in wall of suitable size for fixing of exhaust fan all as directed by Engr-in-charge.(item to be issued under schedule ":B")

Supply and fixing stepped type electronic fan regulator, modular type type and connecting up, ISI marked, 240 Volts.

Taking down & Refixing of ceiling fan complete of any sweep 240V, AC and connecting up with necessary wiring of 3 core flexble copper wire, complete all as specified and directed.

Supply and fixing sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts, grouted in wall complete all as specified & directed.

Supply and fixing sheet metal enclosures single door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,4 way, 240 Volts.

Supply and fixing sheet metal enclosures single door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,2 way, 240 Volts.

S & F MCB 32 Amp, single pole & neutral,240 Volt

S & F MCB SPN 63 Amp, Single pole & neutral,240 Volt

S & F MCB 6-32 Amp, single pole 240 Volt

Supply & fixing AC box single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 240 volts, 32 Amps

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Conduit should measured as one length)

Supplying, laying, jointing, testing and commisioning of size 3.5 core 50 Sqmm LT under ground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall complete all as specified and directed. Note :- Exacavation and earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid seprately under respective items of the BOQ'.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Boring of holes under road, payment hard standing by trench less technology using ultra sound technique and necessary machine including supply and fixing HPDE pipe of 80 mm bore suitable for 0.4 mpa working pressure all as specified and directed.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L for dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

Supply and Fixing cubical metallic box of size 1.0 Mtr X 0.9 Mtr X 0.30 M depth made out of 2 mm thick mild steel sheet, front openable double door type with locking arrangement with and including 3 mm thick plain sheet clear glass of suitable size fixed to facilite meter reading, all internal and external steel surfaces painted with two costs of synthetic enamel paint over a coat of red oxide primer, internal wiring with PVC insulated single core multistranded copper conductor FRLS cable IS-694 marked of adequate size but not less than 6 Sq mm with proper ferrule and cable gland, box shall be fixed on wall with 'Anchor' type/fastner type bolts & nuts ( set of 6 bolts of 12 mm dia 200 mm long with nuts and washers) grouted into the wall properly to hold the box , writing MES/Qtr No for each energy meter with thick white synthetic enamel paint , neoprene rubber gasket shall be provided for proper sealing,including box shall have arrangement for fixing electric energy meter - 04 Nos, MCB DB SPN 2 way - 04 Nos , MCB DB SPN 4 way - 01 Nos complete all as directed. Note :- (1) Existing Electric Meters - 04 Nos will be taking down carefully and refixing the same inside the New Meter Box carefully incl necessary electric connections and sealing the electric meter, and MCB DB SPN 4 Way and MCB DB SPN 2 Way shall be measured and paid for separately under relevent items of this schedule (2) - The cubical box shall be fix inside(concelled) the existing wall by necessary cutting/grouting the wall and make good the disturbed surfaces by applying cement plaster and white wash to match with the adjacent surface of wall.

Supply and Fixing cubical metallic box of size 0.8 Mtr X 0.6 Mtr X 0.25 M depth made out of 2 mm thick mild steel sheet, front openable double door type with locking arrangement with and including 3 mm thick plain sheet clear glass of suitable size fixed to facilite meter reading, all internal and external steel surfaces painted with two costs of synthetic enamel paint over a coat of red oxide primer, internal wiring with PVC insulated single core multistranded copper conductor FRLS cable IS-694 marked of adequate size but not less than 6 Sq mm with proper ferrule and cable gland, box shall be fixed on wall with 'Anchor' type/fastner type bolts & nuts ( set of 6 bolts of 12 mm dia 200 mm long with nuts and washers) grouted into the wall properly to hold the box , writing MES/Qtr No for each energy meter with thick white synthetic enamel paint , neoprene rubber gasket shall be provided for proper sealing,including incomming MCCB 100 Amps rated, box shall have arrangement for fixing electric energy meter - 04 Nos, MCB DB SPN 2 way - 04 Nos , complete all as directed. Note :- (1) Existing Electric Meters - 04 Nos will be taking down carefully and refixing the same inside the New Meter Box carefully incl necessary electric connections and sealing the electric meter, and MCB DB SPN 2 Way shall be measured and paid for separately under relevent items of this schedule (2) - The cubical box shall be fix inside(concelled) the existing wall by necessary cutting/grouting the wall and make good the disturbed surfaces by applying cement plaster and white wash to match with the adjacent surface of wall.

Fixing only water heater storage type, electric (single phase) having storage capacity of 25 Ltrs and BEE 5 Star rated compete all as specified & directed. (Water heater shall be issued under Schedule 'B' )

S&F Brass CP mixer valve for mixing hot & cold water screwed down for iron pipe and fixed all as specified & directed.

S&F stop valve, 15mm dia cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F PVC connection, 15mm size with PTMT nuts of length 450mm.

M/S RAJINDER SINGH

MADAN MOHAN JAIN sons

M/s S Amarjit Singh