REPAIR MAINT OF GARBAGE BINS, REPAIR TO ROOFS, FALSE CEILING, WATER TANK STAGINGS, CHAJJAS, FLOORING, FENCING AND EXTERNAL/ INTERNAL PLASTER FINISHES IN OFFRS MD ACCN AT JUTOGH CANTT UNDER GE (I) JUTOGH

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: The work is required to be carried out in buildings up to triple storyed, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above factors shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided, complete all as specified and directed. Note: The work is required to be carried out in buildings up to triple storyed, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above factors shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

Removing weed vegetation, moss, small shrubs and rubbish material on chajjas, roofs, walls at any position and at any situation in GF roof or in 2nd floor roof, ACC roof papapets and making good with cement plaster or surface finish as per existing surface complete all as specified and directed.

Removing weed vegetation, moss, small shrubs and rubbish material on chajjas, roofs, walls at any position and at any situation in GF roof or in 2nd floor roof, ACC roof papapets with mechanical hand held grinder, washing with bleeching powder and lastly spraying roundup herbicide (glyphosate) or equivalant as per manufacturer instructions and making good with cement plaster or surface finish as per existing surface complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 25mm deep and shaping horizontal face of groove with cement mortar 1:3 to take in profile sheet and making it good to match the existing surface and applying Pidilite roofseal or equivalent as per manufacturers instructions for resisting seapage complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based tile profile steel sheet 0.50 mm thick of colour approved by Engr-in-charge having tensile strength of 550 Mpa as in Chajja/roof covering/clading to wall, fixed with self tapping screws and making it good by Cutting grooves in brick wall, 75mm wide and 25mm deep and shaping horizontal face of groove with cement mortar 1:3 and applying Pidilite roofseal or equivalent as per manufacturers instructions and making it good to match existing surface, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ clading/ to wall,eaves board etc fixed with self tapping screws, upto three sotries building, complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for Steel work in hollow tubular square and rectangular section trusses, purlins and bracing supports etc including any special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed.

S & F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed/welded complete to wood or steel members not exceeding wt 4 Kg/ Sqm, complete all as specified and directed.

M&L for TMT bars 10mm dia and over upto and including cranking, bending hooking end and including mild steel wire not less than 0.9mm dia and securing with clips complete all as specified and directed.

M&L for TMT bars 6-8mm dia including cranking, bending hooking end and including mild steel wire not less than 0.9mm dia and securing with clips complete all as specified and directed.

M&L for RCC 1:2:4, (Nominal Mix), Type B-1, using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the Chajjas, Chimneys and shafts, complete all as specified and directed.

M&L for formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismentling of existing tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismentling of existing tank, complete all as specified and directed.

Taking down unserviceable 20mm bore GI steel water tubing and connections, fittings, complete all as specified and directed.

M &L for 20 mm mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors complete all as specified and directed.

Refixing 20mm bore old Steel water tubing and connections of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repairs 20mm bore dia Gunmetal gate valves with iron wheel head, complete all as specified and directed.

S&F in repairs 20mm bore dia Ball brass high pressure with polythene Floot and Flynut, complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors, steps, over 20mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, cooking platform etc., complete all as specified and directed.

M&L for 15-18mm thick granite (of any type ) work table rubbed and polished) in pillar/vertical surface,cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 20mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed.

M&L for exterior stone craft finish ceramic cladding/ elevation tiles joint free in vertical surfaces of size 350x250x7-8mm/ 450x300-350x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in cement mortar 1:4, complete all as specified and directed.

S&F Vitrified ceramic coloured tiles light shade/ double charged 9-10 mm thick size 600X600 mm floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over and incl 20mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F Vitrified ceramic coloured tiles light shade/double charged/ultra charged 9-10 mm thick size 600X600 mm floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps over 10mm thick backing coat in cement mortar 1:4 etc., complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets, complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building boards (PVC coating E board designer) fixed or laid /inserted to timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M&L for GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Demoltion of RCC Jali of any description and in any position not otherwise specifically provided. Note: The work and its restoration with WPC jali and frame is required to be carried out in buildings up to tripple storyed, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 63 x 51 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid moulded door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) Jali (exterior) of 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm each and n exc 2 Sqm each complete all as specified and directed.

S&F factory made 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.

S&F factory made Plain framed, panelled shutter IInd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long, complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 150mm long, complete all as specified and directed.

S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21, complete all as specified and directed.

S & F mild steel butt hinges, medium weight 100 mm size fixed with steel screw, complete all as specified and directed.

S&F 100mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long, complete all as specified and directed.

S&F floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body, designation No.2, universal type, suitable for door shutters of weight between 36 to 60 kg complete all as specified and directed.

Taking down cement or cement lime plaster, of any description incl tiling etc complete all as specified and directed.

M&L for rendering 15 mm thick in cm (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for plastering work 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) with water proofing compound finished even and fair (without using extra cement) complete all as specified and directed. Note:- WPC will be measured and paid seperately.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a coat of a chalk whitening priming surface, complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.

M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coats of weather proof anti fungal exterier emulsion paint on external surfaces incl a coat of alkali resistant priming paint at any height of building / tower complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.

M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built, complete all as specified and directed.

S&F in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod complete all as specified and directed

M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and n.exc. 500 ltr complete all as specified and directed. Note: Any damage to FV, pipe etc shall be make good by the contractor.

M&L for 40mm thick cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in flooring complete all as specified and directed.

S&F in repair 15mm bore bib taps,chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15mm bore stop cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed.

S & F in repair 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup (concealed type ) screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed, complete all as specified and directed.

S & F in repair 15mm bore stainless steel chrome finish angle/ urinal valve with flange screwed one end of iron pipe or for union and fixed, complete all as specified and directed.

S&F Sink mixer with swinging spout(wall mounted model)Chromium plated brass with connection and nut complete all as specified and directed.

S&F brass chromium plated wall mixer for mixing hot& cold water including Hand Shower screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair PVC bathroom cabinet mirror 450 x 350 mm, complete all as specified and directed.

S&F in repair swivel shower of chromium plated any colour with shower arm 15 mm size 195 mm long with bend of 45 degree with flange of any colour for fixing with 15mm pipe. (Minimum weight 40gms), complete all as specified and directed.

S&F in repair towel ring of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed.

S & F in repair soap dish approximately size 160 x160x 90 mm and fixed with as chromium plated brass screws complete all as specified and directed.

S&F for in repair PVC corner shelf with bracket, complete all as specified and directed.

S&F in repair CP brass telephonic spray (ABS Body) (health faucet) mild steel chromium plated with flexible pipe 1.25m long and ABS hook fixed to EWC suitable for 15mm bore of pipe fixed complete all as specified and directed.

S&F in repair CP grating doom 100mm dia complete all as specified and directed.

S&F in repair aluminium door seal (rat proof) fitted in door leaf with screw complete all as specified and directed.

S& F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts complete all as specified and directed.

S&F in repair for brass CP fancy type 15mm bore pillar tap for WHB, complete all as specified and directed.

S & F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair CP Toilet paper holder with flap cover fixing with all necessary arrangementsscres etc., complete all as specified and directed.

S&F in repair vitreous china urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed.

S&F in repair vitreous china urinal partition white of size 310x700 mm above 40cm floor line complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

S&F in repair Vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc., complete all as specified and directed.

S&F in repair Plastic water closet seat, white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed.

S&F in repair Wash basins, vitreous china (flat back or angle back type) size 550x400mm white, incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

M&L for filling cracks less than 3mm with Asian Paints/ Pidilite crak seal or equivalent as per manufacturer instructions complete all as specified and directed.

M&L for waterproofing for internal dampness with Asian Paint Hydroloc waterproofing coat or equivalent as per manufacturer instructions and covering after complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying one coat of Asian Paint Hydroloc Waterproofing Coat on saturated dry surface without dilution, complete all as specified and directed.

Manufacturing, supplying and fixing Retro?reflective regulatory sign board of size 400 x 180 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted/ screwed to M.S. frame/ wall complete all as specified and directed.

M&L applying two coats of oil bound distemper over a one coat of birla white putty 3mm thick on walls, complete all as specified and directed.

M/S Shiv Kumar

M/S kuldeep kumar khullar