MISC CERTAIN BR REPAIRS INCLUDING SECURITY FENCING, STEEL GATE, ETC., IN AGE BR-II AREA UNDER GE SAUGOR.

Amount

Dismantling posts or struts (wood,steel or RCC ) in natural ground any section ,including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of barbed wire of any thickness or size complete all as specified and directed. .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling framed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches, pillars, etc built in cement mortar complete all as specified and directed.

M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & fair complete all as specified and as directed

M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed . Make Asian ACE or equivalent make as approved by GE

Surface excavation not exc 30cm deep & averaging 10 cm deep and getting out in soft/loose soil complete all as specified and directed.

Site clearance in soft/loose soil complete all as specified and directed. .

Excavation in post holes (or similar holes ) each n.exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cum, watering and removing, surplus soil to distance not exc, 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregates) for embedding of chain link fencing, rounded or chamfered on edges including necessary formwork complete all as specified and directed. .

S&F angle iron fencing posts including cutting tops to shape as directed, drilling holes, notching for wire ets; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel plain round bars 10mm dia as in line wire for chain link fencing quality confirming to Fe-410 W complete all as specified and directed.

S&F chain link MS galvaised fenccing of any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Make:-TATA/SAIL/JINDAL

S&F mild steel screw bolts of neck 5 to 10 mm dia (machine made) with hexagonal or Square heads at one end and screwed the other or screwed both nds, each screwed end to be fitted with washers and one hexagonal or Square nut, length of bolt not exc. 5 cm complete all as specified and directed

M&L for painting steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over a coat red oxide primer including preparation of surfaces complete all as specified and directed.h exc 10 cm.

M&L for preparation of newly steel and iron surfaces of any description n.exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S&F galvanized 2 strand 2.00 mm dia steel barbed wire with 2mm dia barbs at 75mm (approx) spacing & straining & fixing to any type of post straining bolts including securing or tying at crossing with and provisions of galvanized mild steel wire staples or steel pins complete all as specified and directed. (Note:- Each row of wire shall be measured for the purpose of payment, no separate payment shall made for mild steel tying wire staple/pin) Make:-TATA/SAIL/JINDAL

S&F steel work in purlins/rafters/posts with round/rectangula/square hollow mild steel section complete all as specified and directed.

S&F mild steel plates (Plain or chequred) channels, square cut or notched forming holes, with riveted, bolted, welded attachement conforming to Fe 410 - W (Gde-E-250) quality-B complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but not exc 10cm long dia of shank 16 to 20 mm complete all as specified and directed..

S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 16 to 20mm and length exc 22.5cm and not exc 30cm complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly complete all as specified and directed.

S&F mild steel work like flat iron including all necessary drilling,screwing, bolting , reveting & welding, etc and similar work conforming to Fe-290 Gde E-165 for wind ties,gutter strap and frame for cladding complete all as specified and directed.

S&F mild steel framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks ,cattle traps & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Taking down and reixing Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

maharaja construction and suppliers

Samaksh Enterprises