Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC C 234 ADG P CHENNAI | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹45.9 L+₹1.4 L (3.12%)Rejected-Finance C 101 ADG P CHENNAI | L2 | Rejected-Finance BEING NOT L1 BIDDER | |
| 3 | L3₹46.9 L+₹2.4 L (5.37%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L3 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
17 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Ashwani Mittal EE GE DSSC
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDITION ALTERATION TO CASTLE A AND CASTLE B AT DSSC WELLINGTON
2023_MES_603194_1
8355/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹88,000
Yes
3 Aug 2023
14 Jun 2023
19 Jul 2023
14 Jun 2023
17 Jul 2023
28 Jun 2023
Amount
Dismantling plain or corrugated double layer steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
M&L for 0.60 Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and as directed.
S&F for 0.60mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as specified complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, crimp curved where necessary fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
M&L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.
S&F MS Anchor fasteners of size 12mm dia. and 150mm length for fixing the plates to the wall surface complete as specified and as directed.. Make:- Hilti or Equivalent as approved by GE
S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A) complete all as specified and as directed.
M&L for preparing new surfaces of steel over 10 cm width or girth not otherwise specified and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.
Taking down existing water proofing treatment of any description (Brick tile, concrete, roof kerb, rounded or chamfered on edges,etc.,) and removal rubbish off the premises and through away debris upto 5 km distance, complete all as specified and as directed.
M&L for APP modified water proofing membrane, 4mm thick and weighing not less than 3.6 kg/Sqm reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm side lap & end lap 15 cm over coat of bitumen primer @ 0.20 Kg/Sqm finishing with aluminium paint applied @ 0.10 kg/Sqm & finished complete all as specified and as directed.
M&L for APP modified water proofing membrane mineral finish, 4mm thick and weighing not less than 3.6kg/sqm reinforced with non woven ployster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm side lap & end lap 15cm over coat of bitumen primer " 0.20 Kg/Sqm complete all as specified and as directed.
M&L for durastone tile of 300x300x10mm thick, laid over and including screed bed in CM 1:4, 15mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement to match with tie complete all as specified and as directed.
Cutting out cracks to V-section in existing roofs / terracing / walls / celing, cleaning out, wetting, grouting with cement and sand slurry 1:3 using water proofing Compound including staging upto 10 mtrs height where ever necessary. complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B0 (12.50mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges, complete all as specified and as directed.
M&L Providing, cement concrete 1:2:4 type B-0 (using 12.50 mm greded aggregate) as in roof padding 40 mm thick even and rough to receive top layer complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using water proofing compound finished even and fair complete all as specified and as directed. Note:WPC will be measured and paid seperately.
Dismantling of ceiling boards or insulation boards any thickness including cover fillets complete all as specified and as directed.
M&L for providing gypsum board false ceiling 10-12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200mm c/c, main and inter connected channel shall be fixed through fasterners clips as per manufacturers instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceiling etc complete all as specified and as directed.
M&L for preparation of newly surfaces of ceiling and applying two coat of distemper oil emulsion washable on new surface over a coat of primer over a coat of wall care putty complete all as specified and as directed.
Demolition of floor hearth or wall tiling including cement mortor bedding (but not backing) and removing rubbish out side from MD land complete all as specified and as directed..
M&L for joint free anti - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured wall tiles in bathroom of size 300 x 600 x 8 to 10 mm thick as in vertivcal surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:3 as backing coat complete all as specified and as directed. Make : Model : Somany/Kajaria/Johnson/Orient Bell as approved by GE.
M&L for vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished area of each tile exceeding 0.36 but not exceeding 0.42 sqm. in floors of approved shade etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(light shade) including 15 mm thick screed bed in CM 1:4 as directed and as specified.
M&L for vitrified ceramic tiles 8 to 10mm thick (square/rectangular) of approved shade polished area of each tile exceeding 0.36 but not exceeding 0.42 sqm. in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(light shade) including 10 mm thick screed bed in CM 1:3 complete all as specified and as directed.
Taking down chowkats or frame nexc 1.5 Sqm each without taking off shutters from frame, complete all as specified and as directed.
Taking down chowkats or frame exc 1.5 Sqm but n exc 4 Sqm each without taking off shutters from frame, complete all as specified and as directed.
S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engr- in-charge.
S&F for Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engr-in-charge.
M&L for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified.
M&L for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed.
S&F for MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and as directed.
M&L Providing, cement concrete type C1 (1:3:6) using 20mm graded stone aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complete all as specified and as directed.
S&F for 35 mm thick decorative both side flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S & F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F for statinless steel Butt hinges medium weight cold rolled & fixed 100 mm long complete all as specified and as directed.
S&F for aluminum handles cast type anodized 150 mm long complete all as specified and as directed.
S&F for aluminum anodized barrel tower bolts of extruded section 300 mm long. complete all as specified and as directed.
S&F for Aluminium alloy, anodised sliding door bolt 300 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.
S&F for stainless steel door stopper 75mm to 125mm size with rubber complete all as specified and as directed.
S&F in repairs Factory made UPVC colour three track sliding Windows with glazing all as per manufacturer's direction and following specifications :- (i) UPVC Window frame shall be made of PVC material confirming to IS 10151, the Window frame shall be made of extruded UPVC section having overall dimension of 112 x 52 having wall thickness 2.5 mm ± 0.2 mm . (ii) Corners of wall frame shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iv) The profiles should be two or three chamber system which shall provide high insulation properties. (v) Glazing shall be provided with 5mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer's specifications. (vi) Stainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix. Note: The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.(II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.
S&F for 2nd class HW glazed and skeleton, shutters, open rebated and prepared to received glass, gauge etc(with sash bar) edges of framing plain, chamnered or rounded and mitred, beads for securing glass etc the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) window & ventilaters shutters thickness 30 mm and fitted to chowkat etc complete all as specified and as directed.
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F 4 mm thick Sheet glass ordinary quality figured/frosted glassand glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F Stainless steel fancy type curtain rod 25mm dia incl side caps and single/ double brackets etc, as in repairs including end bushes complete all as specified and as directed.
M&L applying two coats of synthetic enamel paint on new wooden surfaces over 10 cm width or girth over a coat of pink primer complete all as specified and as directed.
M&L preperation of old painted wooden surface including scrubing removing old paints and applying two coats of synthetic enamel paint over a coat of pink primer over 10 cm width or girth including filling holes with fevicol and wood dust etc., complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.
S & F HDHMR Board Board 18mm thick both side laminated any colour, as in PVC Bedding Shutter vertical support and horizontal shelfs including necessary fittings of screws/MS Brackets in kitchen cupboard complete all as spd and as directed.. Make :- HDHMR board : ACTION TESA or techno commercially equivalent
S & F soft close stainless steel hinges 75mm complete all as specified and as directed . Hardware : EBCO or techno commercially equilavent
S & F Gunmetal handle 150mm complete all as spd and as directed. HANDLE : RICH or techno commercially equivalent.
S & F stainless steel telescoping channel for drawer including necessary fiiting upto length upto 600mm complete all as spd and as directed..
S & F Stainless steel racks for crockery of kitchen drawer as approved design and standard quality of length 600mm complete all as specified and as directed.
Demolition and breaking up of upto160 mm PVC or reinforced cement concrete drain pipes, jointed in cement mortar and taking out of trenches, if requiredand removing rubbish out side from MD land complete all as specified and as directed..
S&F PVC (SWR) half rounded gutter dia 160mm (4kg/sqcm) incl end cap and reducer droplet including supply and fixiing with FI 40 x 6mm complete all as specified and as directed.
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors 75 mm mm dia complete all as specified and as directed.
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints, fixed to walls 75 mm mm dia complete all as specified and as directed.
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors 110 mm mm dia complete all as specified and as directed.
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,fixed to walls 110 mm mm dia complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110 mm bore. complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed..
S&F PVC (SWR) floor trap plain with grating incl. jointing with solvent cement (100 mm bore) complete all as specified and as directed.
M&L for tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling 15mm bore including taking down of existing tubing complete all as specified and as directed.
M&L for tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling 20mm bore including taking down of existing tubing complete all as specified and as directed.
Cutting chases on Brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed..
S&F in repair stainless steel 1 mm thick kitchen sink duet regulat double bowl size 1143 X 510 X 203mm, bowl size (510 x 405 x 203mm) and coupling, waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets/in granite slab and connecting union to pipe complete all as specified and as directed.. Make -Prayag Cat Part No 1250D or equivalent in Nirali/Jayna as approved by GE.
S&F in repair Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as spd and as directed. Make- Jaquar Cat No CON-309KNB or equivalent in Hindware/Cera/Parryware as approved by GE
S&F in repair Europen bristol coupled closet casecade size 850 x 360 x 720mm with duel flushing cistern system with PP soft close seat cover, hinges fixing accessories set P or S trap complete all as spd and as directed. Make- Jaquar Code OPS-WHT-0205 P/S or equivalent models in Parryware/Hindware/Cera as approved by GE
S&F for in repair counter top wash basin snow white oval type 560x470mm fixed over granite slab of size 900x600x18mm including brackets, PVC connection waste pipe , waste coupling etc. Including taking down existing one all as specified. Make Cera Cat No S2030104 popular for counter type or equivalent in Jaquar/Parryware/ Hindware
S&F Rotational moulded polythene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity including dismantling water tanks and removing to store. complete all as specified and as directed. Make : SINTEX/POLYCON/Vectus Industries Ltd
M&L for Ball valves (20 mm) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms)
S&F in repair health faucet Cat No. ALD-CHR 565 Make Jaquar or equivalent Cera/Hindware/ Parryware including 1.2m long flexible tube and wall hook complete or equivalent complete all as specified and as directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm Make - Prayag or equivalent in Cera/Hindware/Parryware
S&F in repair 15mm dia Angular stop cock with wall flange Cat No ORP 10053 PM Make - Jaquar or equivalent complete all as specified and as directed.
S&F in repair wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower) Cat No CON-281KN Make - Jaquar or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair hand shower 95mm round shape single flow (ABS body chromw plated with grey face plate) with rubit cleaning system including flexible pipe Make Jaquar Cat No - HSH-1737/SHA-571 or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair bib cock long body with wall flange Cat No ORP 10037PM Make - Jaquar or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair over head shower (150 x 150mm) of Make Jaquar Cat No OHS-CHR-1605 or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair shower Arm 400x25x25mm of Make Jaquar Cat No SHA-455L400 Square shape for wall mounted showers with flange complete all as specified and as directed.
S&F in repair Central hole basin mixer with popup waste system with 450mm long braided hoses Cat No - CON-169KNB Make - Jaquar or equivalent in Cera/Hindware/ Parryware complete all as specified and as directed.
S&F in repair towel ring square with round flange Cat No ACN - 1121BN Make - Jaquar or equivalent complete all as specified and as directed.
S&F in repair toilet paper holder Cat No ACN-1151N Make - Jaquar or equivalent in Cera/Hindware/Parryware fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.
S&F in repair soap dish holder of Jaquar Cat No - ACN - 1131N or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair tumbler holder of Jaquar Cat No - ACN-1141N or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair Towel rail 600mm long for Make Jaquar Cat No ACN - 1111SM or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repair Towel rack 600mm long with lower hangers Make Jaquar Cat No ACN 1181FHS or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repairs 5.50mm thick looking mirror of size 900x600mm mounted on 6mm thick Plywood backing or AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
S&F in repairs corner racks with glass with brass brackets chromium plated railings Make. Jaquar Cat No ACN - 1173 or equivalent in Cera/Hindware/Parryware all as specified.
S&F in repairs double coat hook with brass brackets Make. Jaquar Cat No ACN - 1161N or equivalent in Cera/Hindware/Parryware complete all as specified and as directed.
S&F in repairs stainless steel plate rack (over all size) 31 x 36 x 10 inch Make Prayag Cat No : P-348/Hindustan complete all as specified
Demolition of cement concrete of any description and in any position not otherwise specially provided for and removing rubbish out side from MD land complete all as specified and as directed..
M&L for formwork to sides and soffits of floor or roof beam, beam haunchings ,griders ,bressum mers lintels,cantilivers,shelves including supports,overhangs,etc.also splays between floors and beams. complete all as specified and as directed.
M&L for RCC Type B1 (1:1 1/2:3) 20 mm graded stone aggregate beams, cantilevers, bressummers, lintels, slab over 1.5m span complete all as specified and as directed.
M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips . complete all as specified and as directed.
As per item No 97, but 8mm dia and over in stirupps, spaces and binders complete all as specified and as directed.
M&L cement concrete1:3:6 type C-2 (40mm graded aggregate) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed.
M&L Chequerd cement concrete coloured tiles 300 x 300x 25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in cm 1:6 complete all as specified and as directed.
Demolition for brick work or stone masonry or block masonry laid with cement mortar or cement lime mortar complete all as specified and as directed.
M&L for precast cement concrete solid building blocks masonary exc 10 cm in width and setting in mortar 1:4, type C-1 1:3:6 (20 mm graded stone agregate) complete all as specified and as directed.
Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc including removal of rubbish outside MD land complete all as specified and as directed.
M&L for Rendering 15mm thick in cement mortar 1:4 on fair face of stone surfaces /brick finished even and smooth without to using extra cement with WPC complete all as specified and as directed. Note : WPC will be measured and paid seperately.
M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of stone surfaces /brick finished even and smooth with out using extra cement. complete all as specified and as directed.
Supply only liquid water proofing compound all as specified.
Complete removal of existing treatment with grinder for smoothly surfaces from external wall surface and preparation of surface with two coat of wall care putty and applying two coat of asian acrylic emulsion or equivalent in shalimar/Berger paint over priming surfaces on wall complete all as specified and as directed..
M&L for preparation of new plastered surface with two coats of wall care putty and applying two coats of asian acrylic emulsion or equivalent in shalimar/Berger piant over priming surfaces on wall complete all as specified and as directed.
Complete removal of existing treatment with grinder for smoothly surface from external wall and applying two coats of acrylic emulsion exterior paint (weather coating) over on coats of primer after applying two coat of APEX ULTIMA of Asian paints/Weather coat smooth in Berger/Nerolac Excel top Guard of Nerolac wall care putty complete all as per manufactured instruction complete with griner for smoothly surfaces all as specified and as directed..
M&L for preparation of new plastered external surfaces and applying two coats of acrylic emulsion exterior paint (weather coating) APEX ULTIMA of Asian paints/Weather coat smooth in Berger/Nerolac Excel top Guard of Nerolac over on coat of primer after applying two coat of wall care putty complete all as per manufactured instruction complete all as specified and as directed.
Dismantling and replacing Ist class hard wood flooring planks of thickness not less than 20mm including necessary packing finishing, grinding etc andapplying two coat of french polish with a coat of wood filler complete all as specified and as directed.
M&L for applying two coat of french polishing on surfaces of any description, width or girth , cleaning and preparing the surface and applying a coat of wood filler on old wooden surface with one or two coats to a glossy finish complete all as specified and as directed..
Dismantling timber scantling 40 Sqcm and over in section in any position (unframed/ framed work ) complete all as specified and as directed.
S&F 2nd class hard wood scantling as in rafters, purlins, trusses etc complete all as specified and as directed.
S&F Polycorbonate sheet any colour (as approved) sheeting 6mm thick with side lap fixed with coach screw and washer in door, wall, gate, roof etc fixed complete all as specified and as directed by Engr-in-Charge.
Taking down carefully old existing Un-Serviceable Al/Copper batten/surface conduit/concealed conduit point wiring (light/exhaust fan/socket/call bell/ Power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, Fluorescent tube light fitting) removing the Un-Serviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and as directed.
Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size upto 10 Sqmm on wooden batten/PVC conduits complete with battens/conduits and shall be removed from site and making good the disturbed surfaces of wall complete all as specified and as directed.
Disconnecting/dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/un serviceable burnt MCBs complete all as specified and as directed.
M&L for point wiring with 1.5 Sq mm, PVC insulated, FRLS,single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit conealed in wall/ceiling/roof etc with all necessary accessories with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and as directed for One light/fan/call bell point controlled by one switch. Make of Cable : Havells/Finolex/Polycab
Description all as per item No 119 above, but for One 5 amps 5 Pin socket outlet on independent board
Description all as per item No.119 above, but with PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket.
Note: for item No. 119 to 121 :(i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit:- Precision/Modi/finolex
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit:-Precision/Modi/finolex. Note for item No 122 and 123 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately. 3) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.
S&F call Bell, AC, Ding Dong type 230 Volt. Complete all as specified and as directed. Make:Anchor/Havells/C&S Code No 8432
S&F Modular type socket outlet 2 in 1, 6/16 Amps all as specified and as directed. Cat No ACVKCWW163 Verona of Crabtree (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
S&F in repairs Modular type switch with indicator single pole 16 Amps one way all as specified and as directed. Cat No ACVSXIW161 Verona of Crabtree (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
S&F in repairs Modular type switch single pole 6 Amps one way all as specified and as directed. Cat No ACVSXXW061 Verona of Crabtree (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
S&F in repairs switch bell push modular type, 6 Amps, single pole, one module. Complete all as specified and as directed. Cat No ACVSBXW061 Verona of Crabtree (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
S&F in repairs Modular type socket out let 6 Amps 2/3 pin combined 2 module complete all as specified and as directed. Cat No ACVKSWW063 Verona of Crabtree (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACTXMIIX04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACTXMIIX06, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab.
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 4 modules all as directed. Cat No : ACVPPCWV04, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACVPPCWV06, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab
Note for item No 125 to 137 :- The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S&F of ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminal complete all as specified and as directed.. Make: Havells/CG/Anchor
S&F IP>=20, Class I, Wall mounted 4 feet LED lighting fixture with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, 24 W with min 1800 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and as directed. by Engr-in-Charge. Make: LUKER, Cat No:LT5M24 or techno-commercially equiv in Philips/Jaguar
S&F IP>=20, Class I Wall mounted 2 feet LED lighting fixture with integrated electronic driver & polycarbonate diffuser complete with all accessories, prewired, including 10 W with min 900 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and as directed. by Engr-in-Charge. Make: LUKER Cat No:LT510P or techno-commercially equiv in Philips/Jaguar
S&F recess mounted aesthetically designed LED light of 18 Watts 6500K with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and as directed. by the Engr-in- Charge. Make : Luker Cat No LNPR18 or techno-commercially equivalent in Philips/Jaguar Note: The cost of cutting and making good to the Ceiling and matching to the existing surface is deemed to be included in the unit quoted rates.
S&F IP >= 66,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Jaguar
Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having TOP Opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat No ENDURASUNDOWNSL30WLED757PASYBOPC Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips
S&F decorative wall mounting brushed nickel finish fixture with opal glass diffuser suitable for lamps with B22 with all accessories internally prewired and including connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOAJE1TZ1I060, Model - FLORENTINE WL 1LS B22 SS or techno-commercially equivalent in Philips/Jaguar
Supply and fixing in repairs LED lamps of the 10W, 6500K with B-22 base cap all as directed by the Engr-in- Charge Make : Havells//Jaguar/Philips
S&F ultra modern, Surface mounted, 18W, 6500K LED surface panel complete with electronic driver & high brightness LED of Make: Luker cat No: LNPSRR18 or techno-commercially equiv in Philips/Havells all as directed.
Supply and fixing in repairs LED lamps of the 5W, 3000K with B-22 base cap all as directed by the Engr-in- Charge Make : Havells//Jaguar/Philips
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4 mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge.
Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Crompton.
Supply, install, testing & commissioning of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) incl taking down of old ex fan complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Note for item No 149 and 150 :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.(ii) Old unsv Exhaust fans should be handed over to MES stores.
S&F 4 Way,IP43,IK-09 Metal Double Door, MCCB vertical DB fitted with Busbar and blanking plates, Neutral link with 4 pole MCCB as Incomer and SP/TP MCBs as outgoings, flushing to wall/fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. by Engr-in-Charge.Make: L&T, Cat No: DBVTL004DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.(ii) The cost of taking down the Old existing DB including MCB and to be submitted to MES Store Yard is deemed to be included in unit quoted rates.
S&F MCCB, 4 pole,63 A rating (Ics=100% of Icu),415Volts,36 KA Breaking capacity with adjustable overload & adjustable Short circuit setting complete all as specified & as directed by the Engr-in-Charge.Make: L&T, Cat No CM97919OOH2OG or techno-commercially equiv in Legrand/ABB/Siemens.
S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.
S&F MCB, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10400C or techno-commercially equivalent in LEGRAND/SIEMENS.
S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.
S & F SPN DB, 12 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/ABB/Siemens.
S & F SPN DB, 08 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/ABB/Siemens. Note for item No 156 and 157:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C Series with Breaking capacity 10KA all as directed.Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB
Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geyser) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated, suitable for a pressure rating of 0.8 MPa Bar with 7 years warranty on inner tank, 4 years on heating element & 2 year comprehensive warranty with & including connected accessories and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and as directed. by the Engr-in-Charge. Model - BIANCA, Make: Havells, Cat No: GHWCBNTWH025 or techno-commercially equivalent in V-Guard/Bajaj Note : (i) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surfaces and matching to the existing/original surface is deemed to be included in the unit quoted rates (iii)The cost of taking down old unserviable gyser and tranportation of old gyser to be submitted to MES Store yard is deemed to be included in the quoted rate.
S&F FRP enclosure of size 1000(L) x 690(W) x 215 (D) approx or next higher size with locking arrangement and making flush to the wall, fixing TPN DB inside (measured & paid separately) with suitable accessories/fixing arrangements and re-fixing the energy meters 2 Nos inside & making complete electrical connections & making good the disturbed surfaces incl taking down the old enclosure complete all as specified and as directed. by Engr-in-Charge. Make: Sintex, Cat No GSMB-10069 or techno-commercially equivalent in Hensel/Rittal. Note: The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rate. (ii) The cost of making cut or hole to the enclosure as per site requirements is deemed to be included in the unit quoted rates.
M&L for Coaxial TV cable,RG-6 with less signal losses incl necessary items complete all as specified and as directed. by Engr-in-Charge. Make: Havells, Cat no:WHOJTTKARG06 or techno-commercially equiv in Finolex/Legrand.
S&F internet socket RJ-45, suitable for CAT 6 cable ,sheilded, folded metal 1 module all as directed.Make:Crabtree,Cat No:ACMKRWW451 or techno-commercially equiv in Anchor Roma/Legrand
S&F TV coaxial socket,1 module all as directed.Make:Crabtree,Cat No:ACMKTWW000 or techno-commercially equiv in Anchor Roma/Legrand
Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil.
Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.
Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and as directed..
Supply and laying light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed Note:Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces.
M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and as directed.
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 35 Sqmm incl connecting with suitable glands, lugs etc all as specified and as directed. Make: Havells/Finolex/Polycab
Supply, spreading and compacting of approved riddled earth in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed by Engr-in Charge
ACE PROMOTERS
Sree Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .