SPECIAL REPAIR OF INTERNAL ROADS IN DEPOT UNDER GE NARANGI

Amount

Material and labour for repair to potholes, not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges to at least 25mm in depth and making good by filling in screened & graded road metals, watering and well ramming (including supply of road metals) and applying evenly a priming / tack coat with cationic bitumen emulsion RS1 conforming to IS 8887 at the rate of 0.7 - 1Kg/Sqm complete all as specified and directed.

Scariying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50mm and not exceeding 100mm deep in area exceeding 400 Sqm complete all as specified and directed.

Screening road metal, chippings, etc. on the site of the work when specially ordered including removing screened materials clear of screen and stacking in separate heaps for measuring (materials from both sides of screen measured) complete all as specified and directed.

Material and labour for 75 mm thick (Compacted thickness) WBM, with coarse aggregate with lime stones, sand stones, flint or quartize of grading 2 (63 to 40mm size) spread, rolled and consolidated with 8 to 12 tonne power roller to gradient and camber required complete all as specified and directed.

All as per item No. 4.00 here-in-before but except materials complete all as specified and directed.

Material and labour for preparing of un-surfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and cleaning complete surfaces by applying mechnical air blower upto entire satisfaction of engineer-in-charge and applying a prime coat of Cationic bitumen emulsion RS1 conforming to IS 8887 at a rate of application of 0.7-1 kg/Sqm on surface of WBM as specified in table 500-3 of MoRTH specification for Road and bridge work 2013 using mechanical sprayer complete all as specified and directed.

Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud, grass roots etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or compressed air to remove all loose, dirt, etc. and applying evenly priming/tack coat of cationic bitumen emulsion RS1 conforming to IS 8887 at the rate of 0.2 - 0.3 Kg/Sqm on existing black top surfaces as specified in table 500-5 of MoRTH specification for Road and bridge work 2013 using mechanical sprayer complete all as specified and directed.

Material and labour for providing premixed bituminous macadam laid/rolled and compacted to required gradient and camber using 8 to 10 tonne capacity power roller (consolidated thickness 75mm or less) using paving bitumen (VG 30 Grade) @ 4% by weight of total mix complete all as specified and directed.

Material and labour for providing bituminous premixed carpet 40mm consolidated thickness with 0.54 cum of stone chipping mixed with 29.20 Kg of binder (paving bitumen of grade VG-30) per 10 Sqm, rolled and compacted to required camber and gradient etc. complete all as specified and directed.

Material and labour for premixed sand seal coat with 0.06 cum of sand mixed with 6.8 kg of paving bitumen, applied and rolled to a uniform surface complete all as specified and directed.

Material and labour for preparation of bituminus surfaces of road and marking 2.5 mm thick center lines or other lines, stop lines, dashes arrows etc. and the like not exceeding 10 cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with glass grit @ 300 gms/Sqm over painted surfaces while the painting surfaces are hot with special application machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix in repair two way reflective road stud minimum dimension of 110mm x 128mm x 30mm plastic body reflective pannel of amber red or white colour provided at site as per manufacturer instructions complete all as specified and directed.

Supply and fix in repair solar cat eye aluminium alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.40 V/0.30 watt one ni-cd rechargeable battery (1.20V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd all as per manufacturer's instruction and complete all as specified and directed.

M/S Narayan Chandra Das

M.P.SUPPLY