Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

Grand Total(DSR+N-DSR) 2,47,69,555.00

BILL OF QUANTITY (CIVIL ITEMS)

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 57.06 234.75 235.26 13,424.17

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm

interval including drilling holes at 45 degree and plugging them with cement mortar 1:2

(1cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C.

20% with 1% concentration

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level

1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to

15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and

5.3 spiral stair cases above plinth level up to floor five level, including the cost of centering, cum 0.45 11,505.50 11530.70 5,200.34

shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand:

3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 3.04 927.25 929.28 2,821.30

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 36.43 107.85 108.09 3,937.80

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm 139.11 1,150.50 1153.02 1,60,391.94

1 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm

8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing of edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and polishing of

cut edges etc. complete.

8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement sqm 226.38 1,267.95 1270.73 2,87,667.14

: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames,

wrought framed and fixed in position with hold fast lugs or with dash fasteners of required

dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |)

decorative type, core of block board construction with frame of 1st class hard wood and

well matched teak 3 ply veneering with vertical grains or cross bands and face veneers

on both faces of shutters.

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

2 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |!) non-

decorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both

faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured). sqm 24.18 462.35 463.36 11,203.18

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron

screws ,plugs and priming coat unexposed surface etc.complete.

9.40.1 2nd class teak wood

9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.

complete (Copper oxidised as per IS 1378)

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws

etc. complete :

9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary

screws, etc. complete.

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight

upto 36 Kg. to 80 Kg. and door width from 701 mm to 1000 mm), with double speed

adjustment with necessary accessories and screws etc. complete.

9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers

and a pair of lever handles of approved quality with necessary screws etc. complete. Each 11.00 998.35 1000.54 11,005.90

9.89 Providing and fixing chromium plated brass night latch of approved quality including

necessary screws etc. complete.

9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete:

3 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

9.105 Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal

screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel

and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including

fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener

or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of

boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to

the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc

coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing tape, angle beads

at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for

board as per manufacture's specification and direction of engineer in charge all complete.

9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) : 1996 (Board sqm 215.59 2,131.10 2135.77 4,60,447.90

with BIS certification marks)

9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss

/ matt / suede finish with high density protective surface layer and reverse side of

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622

(thickness to be specified by the manufacturer) of approved make in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in

skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: sqm 6.74 1112.70 1115.14 7,519.37

3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in

white cement mixed with pigment of matching shade complete.

4 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid

on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching

pigments etc., complete.

11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet

for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron

screws complete with :

11.33.1 Second class teak wood

11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in

required pattern in linear portion of the building all complete as per architectural drawings,

with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4

(1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm

including pointing with white cement slurry admixed with pigment to match the marble

shadeincluding rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark

Emperadore etc.

5 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's specification and also including the

cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 176.00 1,529.10 1532.45 2,69,710.98

6 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"

runner with suitably spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of

size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between

main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross

"T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall

angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid

including, required cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI

slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm

long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size

85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for

all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595

mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100

gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and

having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder Sqm 35.28 2,068.75 2073.28 73,139.12

coated of thickness 60 microns (minimum), including factory painted after bending and

perforation and backed with a black Glass fiber acoustical fleece.

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix (upto 10 m

height from ground level):

13.2.2 1:6 (1 cement: 6 fine sand) (Not less than in 1.25 FM) Sqm 298.84 383.00 383.84 1,14,705.23

13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less

than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as

permanufacturer’s specification.

13.41.1 Two or more coats on new work sqm 1030.24 185.65 186.06 1,91,682.55

13.80 Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the surface sqm 313.07 156.05 156.39 48,961.72

even and smooth complete.

DISMANTLING AND DEMOLISHING:

7 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 52.00 367.20 368.00 19,136.22

15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 570.93 73.40 73.56 41,998.26

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster

including disposal of rubbish to the dumping ground within 50 metres lead.

15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling

including disposal of unserviceable material and stacking of serviceable material with in

50 meters lead as directed by Engineerin-

ALUMINIUM WORK:

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required

dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and

sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel

screws, all complete as per architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots

and making provision for fixing of fittings wherever required including the cost of

EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

8 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 27.23 1,505.25 1508.55 41,070.18

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

21.8 providing weather silicon sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5 mm depth and 5 mm width metre 231.00 96.75 96.96 22,398.19

Providing and fixing aluminium casement windows fastener of required length for

aluminium windows with necessary screws etc. complete.

21.15.1 Anodized (AC 15) aluminium each 7.00 89.40 89.60 627.17

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required

shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved

design/pattern, with approved standard section and fixed to the existing window frame

with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the

grill to proper opening size for fixing and operation of handles and fixing approved

anodised aluminium standard section around the opening, all complete as per

requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for

21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & double action

hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing sqm 112.56 5,325.90 5337.56 6,00,812.19

required door fittings, all complete as per direction of Engineer-incharge (Door handle,

lock and stopper etc.to be paid separately).

WATER PROOFING:

22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS 2645 in recommended proportions including rounding off

junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water

proofing compound in recommended proportion including rounding off junction of vertical

and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should

be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

TOTAL OF SCHEDULE ITEM 45,97,225.68

9 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

NON-SCHEDULE ITEM

Accoustic Membrane: Providing and fixing a high-density, polymer-based, non-

bituminous sound deadening membrane with a minimum density of 2000 kg/m³, suitable

for use in partitions and ceiling systems. The membrane shall achieve a fire classification

of minimum Class B-s2, d0 as per EN 13501-1 and comply with relevant fire test

standards. It shall have low VOC emissions and conform to applicable indoor air quality

standards. The membrane shall be installed between gypsum boards using approved

MR-1 adhesive or mechanical fixing, with joints formed as tight butt joints without overlap to sqm 431.67 2,440.00 10,53,282.12

ensure continuity. The material shall provide effective sound insulation, with performance

dependent on thickness and mass as per relevant EN ISO acoustic testing standards. All

materials shall be installed in accordance with manufacturer’s recommendations and

submitted for approval prior to installation.

Cabin Partitions. (Refer Technical Specifications Civil APEDA works)

Glass door with Aluminium Profile: Supply and fixing of 100SG Aluminium Glazed

Door (Single Leaf with Glass infill of 10mm toughened glass with rebate door frame

System all around the door. Aluminium Stile to be formed out of 70x35mm horizontal and

vertical door profile frame with clips & seals. The door shall consist of required number of

fitting like flap hinges,Track arm door closer,Lever handle, Mortise lock, door stopper and

MR-2 door jamb. The Profile and Hardware shall be matt black anodized, including all the Nos 14.00 52,082.00 7,29,148.00

necessary clips, seals and fixing accessories for the system. All Profiles to be with 1.5

mm Gauge thickness excluding 20 Micron of anodizing. Door Size - 900mm x 2400mm.

All complete as per approved manufacturer's specifications and directions of the

Engineer in charge.(Refer Technical Specifications Civil APEDA works)

Glass Partition: Providing and fixing frosted film for Glass door and partition as per

MR-3 manufacturer's specifications all complete as per the satisfaction of Engineer-in-charge. sqm 72.96 10,326.00 7,53,415.94

(Refer Technical Specifications Civil APEDA works)

Toilet Cubicle: Supply, and installation of modular toilet cubicles made from 12 mm thick

compact high-pressure laminate (HPL) boards with decorative finish on both sides,

having properties of water resistance, anti-bacterial performance, and resistance to

MR-4 termites and corrosion. The cubicle shall consist of a 600 × 1930 mm door, 1950 mm high Nos 2.00 38,136.00 76,272.00

divider panels, and an overall height of 2100 mm with a 100 mm bottom clearance from

finished floor level, with all dimensions verified at site prior to fabrication.(Refer Technical

Specifications Civil APEDA works)

MR-5 Accoustic Baffle ceiling (Refer Technical Specifications Civil APEDA works) sqm 43.45 18,000.00 7,82,100.00

10 Digitally signed by MAYANK

RATE:(Multiplying

factor to bring

DSR 2023 DSR 2023 DSR2023 rates with

DESCRIPTION Unit Qty. DSR Amount

CODE NO. Rate 0.973 GST Correction

Baffle False ceiling: Providing & fixing horizontal level suspended ceiling comprising of

vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade

6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to

Woodgrain/Plain finish (Red Oak, Cherry, Black / White). The baffle shall be

electrostatically polyester powder coated to a coating thickness of 60-80 micron. The

powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A

Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as

MR-6 per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. sqm 40.91 16,000.00 6,54,544.00

The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK

Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523 (Not applicable of

Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20 x

30 x 3700mm (Thk- 1.5mm) having slots in module of 25mm to keep baffles at an on-

center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle

Joiner and the ends to be fixed with End caps. (Refer Technical Specifications Civil

Accoustic Membrane: Providing and fixing a high-density, polymer-based, non-

bituminous sound deadening membrane with a minimum density of 2000 kg/m³, suitable

for use in partitions and ceiling systems. The membrane shall achieve a fire classification

of minimum Class B-s2, d0 as per EN 13501-1 and comply with relevant fire test

standards. It shall have low VOC emissions and conform to applicable indoor air quality

standards. The membrane shall be installed between gypsum boards using approved

MR-7 adhesive or mechanical fixing, with joints formed as tight butt joints without overlap to sqm 31.03 2,645.00 82,077.00

ensure continuity. The material shall provide effective sound insulation, with performance

dependent on thickness and mass as per relevant EN ISO acoustic testing standards. All

materials shall be installed in accordance with manufacturer’s recommendations and

submitted for approval prior to installation.

Ceiling. (Refer Technical Specifications Civil APEDA works)

TOTAL OF NON-SCHEDULE ITEM 41,30,839.05

11 Digitally signed by MAYANK

NAME OF THE PROJECT: Estimate for Interior Works of Office – APEDA, Delhi

ESTIMATE- FURNITURE ITEM

Sr no Items Item Description Unit Qty Rate Total Ref Image

The Main table shall be of size 2000 L x 800 D x 760 & Side table size shall be 1600 L x 550 D x 660 H. The

worksurface of the main table shall be made up of 38mm thick E1 grade particle board with melamine finish with

reverse water fall edges. Tabletop corner shall be round. The modesty panel of the main table 400mm height

shall be made up of 18mm thick Pre-laminate particle board with edges shall be duly finished. The modesty

panel shall be connected through L-shape Bracket connector. The worktop shall be connected with the gable end

with the help of aluminum corner shall have overall size of 800 L x 49 W x 45 H. Size of gable end at the Top

Executive 800 width to connect the Aluminium corner and the bottom with 640mm width. Side unit - Side table shall be

Cabin-Table size 1600 L x 550 D x 660 H with 16mm thick E1 grade particle board with melamine finish with 2mm pvc edge

bending on automatic machine. Fixed side return with 2 drawers, single swing door, open shelf and open space

for CPU, with holes for customer put their sockets. Fixed side return shall have flexibility to be placed left or right

during time of first assembly. All the Drawer and shutters shall be operated by finger grove with the help of V

shaped aluminium extrustion on the top of Drawer and shutter facia shall have overall size of 20 L x 34 H x

1.5mm thick. Above the table top shall Aluminium flipup shall be provided for easy wire access. The switch

socket provision shall be provided below the table top at side unit.

The overall size of Chair shall be : Total height 1160 to 1260 +/-5 mm, Back Width 480 mm at Top and 420mm

at bottom, Seat Width 500 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm

range. And over all chair width should be 615 +/-5mm and Overall chair depth should be 640 +/-5mm. Seat

should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection

conforming to IS 3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester –

640 GSM, Abrasion-100000 cycles over PU faom. The chair shall be supplied with Dynaflex Two Piece Back

Construction with cushion made by 25mm foam at 55kg/m3 density. Hardness of 25+3kgf at 50% deflection

conforming to IS 3400. Back shall be provided With 260mm width, 160mm height and 50mm height adjastable

NS-2 Headrest. The Chair should be provided with Synchro tilt Mechanism with three Multi lock features. The No. 2 36485.00 72970.00

mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms

(Height) to be provied with height adjustment button made of Delrin P 500. The mechansim shall possess seat to

back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to

be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle

pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made

up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/-

5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe

thickness & Pipe sizes.

The overall size of Chair shall be : Total height 1010 to 1110 +/-5 mm, Back Width 480 mm at Top and 420mm

at bottom, Seat Width 500 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm

range. And over all chair width should be 615 +/-5mm and Overall chair depth should be 640 +/-5mm. Seat

should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection

conforming to IS 3400. Seat & back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640

GSM, Abrasion- 100000 cycles over PU foam. No flamming or progressive smoldering within one hour of

placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall

Executive be supplied with addtional Dynaflex mechanism Two Piece Back Construction with cushion foam at 55kg/m3

NS-3 Cabin- density having PP back. The Chair should be provided with Synchro tilt Mechanism – with three Multi lock No. 6 26740.00 160440.00

Visiting Chair features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way

Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. The mechansim

shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA

standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying. the axle pin shall be

rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6,

30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be

considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness &

NAME OF THE PROJECT: Estimate for Interior Works of Office – APEDA, Delhi

ESTIMATE- FURNITURE ITEM

Sr no Items Item Description Unit Qty Rate Total Ref Image

3 Seater Sofa : Overall size shell be 2020 mm W x 975 mm D x 820 mm H. Sofa inner frame structure shall be

made from the combination of treated solid wood and plywood having high quality webbing belts to ensure good

strength, rigidity & stable construction to offer high durability. There shall be extra padding between the armrest

& the seat on both sides for better comfort & polyfilled in arms & backrest. The polyurethane (PU) foam shall be

NS-4 used in Seat & back rest having 40 density and 32 density respectively. Seat to backrest angle should be No. 5 69735.00 348675.00

ergonomically designed to offer the best seating comfort. Seat height shall be normally between 16 to 18 inches

and depth shall be between 20-22 inches. Sofa shall be elevated from ground by about 3 inches using Golden

finished metal legs creating provision for easy cleaning & better look. Upholstery shall be of high quality

Leatherite offer the best feel & comfort.

Main Table of size 1800 x 900 x750 (WDH) with side storage size of 900 x 450 x 750mm(LDH).The worktop

shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be

made of 18mm thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending.

Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector. MOdesty height shall

be 450mm .The understructure shall be made of 18mm thick prelam partical board with 2mm pvc edge band all

Cabin- Main the visible side.Wire Management: 300 mm Anodised flip up Made of Aluminum in anodised finish, that shall

Table have soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable

tray, Wire Entry. Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms

composite having two drawer & filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger

groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered

towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable

lock shall be provided.

High Back Chair : The overall size of Chair shall be Total height 1160 to 1260 +/-5 mm, over all width should be

640 +/-5mm and Overall depth should be 640 +/-5mm. Back Width 470 mm at Top and 500mm at bottom,

Seat Width 490 +/-5 mm, Seat Depth 500+/-5 mm and Seat height 455mm to 555 mm +/-5mm range. Seat

should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection

conforming to IS 3400. Seat shall be uplhostered with Leatherette 75% PVC & 25% polyester 640 GSM,

Abrasion- 100000 cycles. The chair shall be supplied with cushion back upholstred with leatherette.The Chair

NS-6 should be provided with Synchro tilt Mechanism with three Multi lock features. The mechanism shall allow 360 No. 7 24533.00 171731.00

degree revolving feature along with height adjustablility. Two Way Adjustable Arms (Height) to be provied with

height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7.

The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Chrome Base shall be provied. Twin

castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards.Tolerance of +/- 5mm to

be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe

thickness & Pipe sizes.

The overall size of Chair shall be : Overall height 900 mm, Back Width 470 mm, Seat Width 485

mm, Seat Depth 460 mm and Seat height between 450 to 470 mm. Over all chair width should be 560 mm and

overall chair depth should be 650 mm. Seat and back should be made up of foam pre moulded at 55 kg/m3

density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat and back shall be upholstered with

100% polyster fabric of 295 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one

hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. Chair

Cabin- shall have fixed armrest made of with PP/Nylon GF. The chair should be provided with 25 x 1.6 mm Round tube

Visiting chair understructure shall connected with 4nos injuction ABS leg shoes. Frame shall be welded by Co2 welding process

for uniform finish conforming to IS 816. Frame shall offered with powder coat finish to provide an attractive

finish. It shall be in black colour. The powder coating pre-treatment shall carried out with three in one chemical.

After pre-treatment process, the components shall powder coated for better adhesion of paint. The frames shall

powder coated with epoxy polyester powder to the thickness of 40-60 microns as per IS 101 and oven baked at

180°. Unless specified tolerance of +/- 10mm to be considered for product dimensions i.e Length, Depth &

height and tolerance of 5% to be considered for thickness & sizes of material & components used.

NAME OF THE PROJECT: Estimate for Interior Works of Office – APEDA, Delhi

ESTIMATE- FURNITURE ITEM

Sr no Items Item Description Unit Qty Rate Total Ref Image

storage: The overall size of Low height storage shall be 1500 x 450 x 750 (WDH) mm. Top shall be made up of

18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated

particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle

Cabin- board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: All exposed shall

storage be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of

6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick

PVC lipping on automatic machine. Cam Lock faciltity should be provided for safe storage of documents.

The Overal size of the Meeting shall be 3000L x1200D x 750H. The worksurface of the table shall be made up of

25mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC Lipping on

automatic machine at visible sides. Two Long sides of the work surface shall be provided with reverse tapered

edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight &

then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure

NS-9 aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, No. 1 78452.00 78452.00

45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support

member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium

diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way connectors. Wire Management:

450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire

entry cover made up of steel sheets.

The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm,

Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat

height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at 55 kg/m3 density. hardness of

25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster

180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair

shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. PU

Meeting Adjustable Lumbar Support full length of size 365 mm, 110 mm height and 25mm thickness. The Chair should

Room- be provided with Self Calibrating Multilock Mechanism that should adjust the tension of the back sensing weight

Executive of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way

Chair Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P

500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as

per ANSI BIFMA standards. Nylon base shall be provided.Twin castors 50 mm dia with PA6 material complying to

ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of

PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm

to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe

thickness & Pipe sizes.

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 995 to 1095 +/-5

mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm

and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam pre moulded at 55 kg/m3

density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro

fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match)

should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection

molded PPGF 20%. Adjustable Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick

shall be provided for better comfort. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio

Snchyro mechansim) that should adjust the tension of the back sensing weight of the user. The mechanism shall

allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be

provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall

possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards.

Nylon Base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017

standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled

reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for

product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

NAME OF THE PROJECT: Estimate for Interior Works of Office – APEDA, Delhi

ESTIMATE- FURNITURE ITEM

Sr no Items Item Description Unit Qty Rate Total Ref Image

Reception table : The overall size of the reception table shall be 1800 mm length, 750 mm depth & 1050 mm

height. On the front side both ends shall be provided with groove design strips to enhance the overall look. At

the centre of the front side L shape surface shall be provided fixed up with hinges to paste logo of the University.

The entire table shall be made up of 25mm / 18mm thick pre laminated particle board of E1 norms. Inside of

table a working height shelf should be provided or height 750 mm to keep desktop/ laptop and normal working

with sitting. the edges of the visible surface shall be sealed with 2mm thick PVC lipping on automatic machine.

Unless specified tolerance of +/- 5mm to be considered for product dimensions Length, Depth & height and

tolerance of 5% to be considered in thickness & size of material & components used.

The overall size of Chair shall be height 1020 to 1120 +/-5 mm, width should be 595 +/-5mm and depth should

be 640 +/-5mm. Back Width 435 mm at Top and 490mm at bottom, Seat Width 500 +/-5 mm, Seat Depth

465+/-5 mm and Seat height 450mm to 550 mm +/-5mm range. Seat should be made up of foam pre moulded

at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered

with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering

within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be

used. The chair shall be supplied with Mesh at the back rest. The back frame shall be made up of injection

Reception,Ent molded nylon GF 3. Adjustable Lumbar Support of size 300 mm lenght, 150 mm height and 3mm thickness

rance- Chair travel upto 65mm. The Chair should be provided with Snchyro mechanism with single lever with one position

lock. The mechanism shall allow360 degree revolving feature along with height adjustablility one Way with height

adjustment button made of Delrin P 500 & arm top shall be PU material. The mechansim shall possess seat to

back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to

be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The

base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with

bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e

Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

The overall size of the table shall be 1050 L x 525 D x 450 H mm. The top surface of the table shall be in boat

shape design having maximum size at the middle & lesser at the ends to form this unique shape. The table top

shall be made up of 18mm thick Prelaminated particle board of E1 norms. The edges shall be sealed properly

with 2mm thick PVC edge banding on automatic machine. The understructure of the table shall be made from

solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the

NS-14 best resilence and high durability. The legs and the frame shall be joined together by method of tenon and No. 4 15893.00 63572.00

mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the

bottom shall be 35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the

legs shall be rounded & inner side shall be corner edges. The wooden frame shall be of size 55mm x 22mm thick

with visible face of 55 mm front and 22mm shall be below the table top running at all four ends as well as one

support in the middle

The overall size of (Open rack) Display Unit shall be 1500L x 450D x 1800H. The side body shall be made of

18mm thick pre laminate partical board with 2mm pvc edge band all the side. The back shall be made of 9mm

thick pre laminate partical board with E1 norms and 2mm pvc edge band finished. The rack shall have multiples

compartment for keeping books,magzie and other items. The rack shall have 50mm skriting at the bottom.

The overall size shall be 900 x 450 x 1800 (WDH) mm. Top shall be made up of 18mm thick pre laminated

File storage- particle board and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge

Wardrobe lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. 2 Shutters to be provied forLeft

& Right compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. Hanger rod also

provided for hanging clothes. The wardrobe shall have open compartment at the bottom for keeping footwear.

NAME OF THE PROJECT: Estimate for Interior Works of Office – APEDA, Delhi

ESTIMATE- FURNITURE ITEM

Sr no Items Item Description Unit Qty Rate Total Ref Image

The worktop shall be made of 25mm thick pre laminate Particle boards with E1 norms dully finish with 2mm pvc

edge band all the side of worktop.The understructure shall be made up of MS powder coated legs having

enhanced look trapezoidal cross section size 52mm x 52mm x 52mm x 26mm with chamfered corners and

thickness of 1.6mm. Edges of the leg should not have sharp edges. For safety of users a radius of R3.20 mm

should be provided. The Trapezoidal tube shall be connected with die cast connectors at top, leg shoe & levelers

at bottom. High pressure aluminum die cast connectors shall of ADC-12 material confirming to ASTM E 1251-

2011, IS 7658-1990 & IS 11035 – 1190. The vertical legs shall be connected by horizontal beams with the help

of aluminum die cast connector that joints the legs vertically and horizontally with pipe of cross section 50 x 25

mm x 1.6 mm thickness. The die cast connect size shall be L shaped having angle of 10 degrees for vertical leg

side. The Diecast connector will have same shape as of Trapezoidal vertical leg at one side and another side

matching to horizontal cross section 50x25. The front fabric screen shall be provided of size 900 mm L x 350

mm ht. made up of 18 mm thick prelam particle board of grade E1 upholstered by fabric, having aluminum

extrusion at all three sides having cross section size of 12mm x 5mm & joined at all 4 corners with Zinc mazak5 No.

NS-17 Workstation

die cast connector of size 15 L x 15 H x 12mm W.Wire Management: Wire Management: The Raceways shall

provided below the work surface for carrying wires from one end to other end of the cluster, Size offered shall be

125mm Ht, Thickness 50mm. With vertical wire entry cover & 65mm dia grommet hole for wire access. The

raceway shall be made of 0.8mm CRCA with duly powder coated. Mobile Drawer Unit : It shall be of size of 400 x

450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms and its edges duly

sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of

18mm, back 9 mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge

band. The drawer side surface shall be provided with finger groove handle-less design. Finger groove shall be

created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at

45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be

provided. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of

5% to be considered in pipe thickness & Pipe sizes.

The Workstation shall be in size of 1200 x 600 x 750 (WDH)mm with Pedestal No. 23 38357.00 882211.00

The overall size of Medium height storage shall be 1500 x 450 x 1200 (WDH) mm. Top shall be made up of

18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated

particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle

Workstation- board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: All exposed shall

Storage be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of

6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick

PVC lipping on automatic machine. Cam Lock faciltity should be provided for safe storage of documents.

The overall size shall of the bed side table be 450L x 450D x 510H mm. The storage unit should have 1 Drawer

on top + open shelf below. The Storage shall be made up of 18mm thick Pre-laminate particle board E1 norms

duly finshall hed with 2mm pvc edge banding on automatic machine. side storage should have one drawer

mounted on best quality slides with facia height of 150mm lenght and 450mm wide. The Drawer facia should be

handles free and should be finger groove handle-less profile on top side. The finger groove handle-less design

shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards

inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine and and bottom

edge and should be fitted with cam lock of best quality. Storage shall have 50mm height skriting below.

NAME OF THE PROJECT: Estimate for Interior Works of Office – APEDA, Delhi

ESTIMATE- FURNITURE ITEM

Sr no Items Item Description Unit Qty Rate Total Ref Image

Providing and fixing display cabinets of approved design and size, made from good quality plywood / block board

Display with hardwood framing, finished with veneer / laminate / paint as specified. Cabinets shall be provided with glass

Cabinets shelves and/or shutters, supported on standard fittings. All edges shall be neatly finished and the cabinet fitted

with standard hinges, handles, locks, and fixing accessories, complete in all respects as directed.

Providing and fixing modular kitchen cabinets of approved make and design, made of plywood with laminate

finish, including base units, shutters, drawers, fittings etc.Modular kitchen cabinets with the carcass, shutters,

and back ply made using 18mm and 6mm HDHMR OSL boards. The shutters and back panels will be finished

Kitchen with 1mm and 0.8mm laminatesrespectively, ensuring a durable and elegant surface. All visible edges will be

Cabinets sealed with 2mmedgebanding for a clean and refined look. Handles of size 100mm x 25mm will be included as

Materials must meet standard specifications and be approved by Engineer-

Incharge/NBCC/Client/Cosultant/Architect prior to procurement.

NBCC INDIA LIMITED

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg,

New Delhi-110016

ABSTRACT OF COST

COST AS PER DSR AS PER MARKET TOTAL

2025 (RS.) RATE (RS.) AMOUNT (Rs.)

SUB HEAD-I:CIRCUIT CUM POINT WRING. 18,33,360.00 - 18,33,360.00

SUB HEAD-II - INTERNAL & FIXTURES & FANS. 2,36,064.00 4,70,402.00 7,06,466.00

SUB HEAD-III - DISTRIBUTION BOARDS. 1,09,094.00 - 1,09,094.00

SUB HEAD-IV - CABLE TRAYS , RACEWAY , 68,850.00 32,692.49 1,01,542.49

4.0 JUNCTION BOX.

SUB HEAD-V - EARTHING. 39,041.00 - 39,041.00

SUB HEAD-VI: UPS SYSTEM & DIAGONAL LED 3,41,772.00 94,440.00 4,36,212.00

SUB HEAD-VII: HVAC SYSTEM (SPLIT AC & 9,09,020.00 6,01,200.00 15,10,220.00

7.0 CASSETTE AC SYSTEM ) .

SUB HEAD-VIII:FIRE ALARM & DETECTION 7,38,641.00 - 7,38,641.00

8.0 SYSTEM & PA SYSTEM.

SUB HEAD - IX :- IP CCTV ,IPABX/EPABX SYSTEM 24,11,101.00 17,20,091.00 41,31,192.00

,LOCAL AREA NETWORK ( LAN ) , ACCESS

CONTROL SYSTEM & GALLERY FOR RICE ROOM

& MEETING ROOM.

TOTAL (I+II+III+IV+V+VI+VII+VIII+IX) 66,86,943.00 29,18,825.49 96,05,768.49

GRAND TOTAL (Rs.) 96,05,768.49

GRAND TOTAL (Rs.) 96,05,768.49

Digitally signed by MAYANK

NBCC INDIA LIMITED

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

ESTIMATE OF ELECTRICAL WORKS

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

SUB HEAD-I:CIRCUIT CUM POINT WRING.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed steel

conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

DSR-1.3 required. (Switch Control Primary Points)

DSR-1.54 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call

bell point (without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel conduit, and earthing

the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable

etc as required. (Switch Control Secondary Points)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS

PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel

DSR 1.7 conduit as required.

DSR 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 600.00 414.00 248,400.00

DSR 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 200.00 476.00 95,200.00

DSR 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 200.00 652.00 130,400.00

DSR 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 15.00 1,001.00 15,015.00

DSR 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 15.00 1,253.00 18,795.00

DSR 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 15.00 1,760.00 26,400.00

Supplying & fixing suitable size GI box wih modular plate and cover in front on

surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25

Amps modular SP MCB, “C” curve including connection, painting etc. as required.

DSR-1.57 (Gysers & AC.)

Supplying and fixing following modular switch & socket on existing modular base &

switch box including connection but excluding modular plate etc. as required.

DSR 1.24.1 5/6 amps switch Each 120 121.00 14,520.00

DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 120 136.00 16,320.00

DSR 1.24.5 6 pin , 15/16 amps socket outlet Each 40 219.00 8,760.00

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

DSR 1.24.6 Telephone socket outlet Each 35 168.00 5,880.00

DSR 1.24.7 TV antenna socket outlet. Each 15 168.00 2,520.00

Supplying and fixing following size/ modules, GI box alongwith modular base &

DSR 1.27 cover plate for modular switches in recess etc. as required.

Supplying and drawing following modularbase & cover on existing on existing

DSR 1.28 modular boxes etc. as required

Supplying and drawing following sizes of FRLS PVC insulated copper conductor

DSR 1.17 single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH

23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded

Twisted Pair, 4 pair should be complied as per UL/ETL verification program for

39.17 compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the

range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C,

Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc.

complete as required.

Total of Sub-Head - I 1,833,360.00 -

NS-1 SUB HEAD-II - INTERNAL & FIXTURES & FANS.

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of indoor type Reccessed mounted

downlighter with Die Cast Aluminium with White Powder Coating housing LED light

fixture with total system wattage 9 W covered by PMMA acrylic diffuser,r, prewired

electronic driver complete with all accessories suitable for operation on single phase

240V 50Hz AC supply as required. LED shall be SMD type, fixture should have

minimum efficacy >=100-110 lm/W and minimum system lumens 1800, (CCT) of

NS-1.1 6500K (optional 3000K & 4000K), input operating voltage range 140V – 270V 50Hz Each 50.00 848.00 42400

AC CRI >80 PF≥0.95,THD<10%, surge proctection of 4KV, Flexible Printed Circuit

Board and L70 rated lifetime of 50,000 hours Reverse Polarity & Short Circuit

ProtectioElectrical Class II, with BIS certified LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED.or

Supply, Installation, Testing and Commissioning of indoor type 2ft surface/Wall

mounted LED Batten for Mirror light with Aluminium Extrusion with White Powder

Coated housing with total system wattage 10W covered by Polycarbonate diffuser,r,

prewired electronic driver complete with all accessories suitable for operation on

single phase 240V 50Hz AC supply, fixture should have minimum efficacy >=110

lm/W and minimum system lumens >1000, (CCT) of 6500K (optional 3000K &

NS-1.2 4000K), input operating voltage range 100V – 300V 50Hz AC, CRI >80 Each 4.00 329.00 1316

PF≥0.95,THD<15%, surge proctection of >4KV, Metal Core Printed Circuit Board and

L70 rated lifetime of 50,000 hours Reverse Polarity & Short Circuit

ProtectioElectrical Class II, with BIS certified LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED

manufacture .or required.

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of indoor type surface mounted

downlighter with Die Cast Aluminium with White Powder Coating housing LED light

fixture with total system 12W overed by PMMA acrylic diffuser,r, prewired

electronic driver complete with all accessories suitable for operation on single phase

240V 50Hz AC supply as required. LED shall be SMD type, fixture should have

minimum efficacy ≥100-110 lm/W and minimum system lumens 1500, (CCT) of

NS-1.3 6500K (optional 3000K & 4000K), input operating voltage range 120V – 270V 50Hz Each 16.00 891.00 14256

AC, CRI >80, PF≥0.95, THD<10%, surge proctection of >4KV, Flexible Printed Circuit

Board and L70 rated lifetime of 50,000 hours Reverse Polarity & Short Circuit

ProtectioElectrical Class II, with BIS certified LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED

manufacture.or required.

Supply, Installation, Testing and Commissioning of indoor type surface mounted

downlighter with Die Cast Aluminium with White Powder Coating housing LED light

fixture with total system 9W overed by PMMA acrylic diffuser,r, prewired electronic

driver complete with all accessories suitable for operation on single phase 240V

50Hz AC supply as required. LED shall be SMD type, fixture should have minimum

efficacy ≥100-110 lm/W and minimum system lumens 1500, (CCT) of 6500K

NS-1.4 (optional 3000K & 4000K), input operating voltage range 120V – 270V 50Hz AC, CRI Each 25.00 756.00 18900

>80, PF≥0.95, THD<10%, surge proctection of >4KV, Flexible Printed Circuit Board

and L70 rated lifetime of 50,000 hours Reverse Polarity & Short Circuit

ProtectioElectrical Class II, with BIS certified LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED.or

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of Suspended /Surface Mounted

Magnetic Track :- Supply of Suspended /Surface Mounted Slim Extruded Aluminium

with Black Powder Coated 2 DC line Magnetic Track Copper Stick Mounted with PVC

Strips and MS Strip for Magnet One Side Black Finish & cutout Dimensions (mm): 27

(W) x 55 (H) x (L) Available -1000MM & Thikness1.5mm All dimensions are in

NS-1.5 tolerance of ± 5mm & Lifetime: 80,000hrs , Operating Temp. Range -10°C to +50°C Each 1.00 2663.00 2663

,designed for Indoor Application with IP20 Protection. Magnetic Recess kit for track-

2meter to be provided along with track. The cost of track should include all joint

like Mid joint, End Joint & corner joint & Driver of 48 volt. Reference image is only

for the design intent. Contractor to provide shop drawings and sample for

approvals.or required.

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of Suspended /Surface Mounted

Magnetic Track :- Supply of Suspended /Surface Mounted Slim Extruded Aluminium

with Black Powder Coated 2 DC line Magnetic Track Copper Stick Mounted with PVC

Strips and MS Strip for Magnet One Side Black Finish & cutout Dimensions (mm): 27

(W) x 55 (H) x (L) Available -2000MM & Thikness1.5mm All dimensions are in

NS-1.6 tolerance of ± 5mm & Lifetime: 80,000hrs , Operating Temp. Range -10°C to +50°C Each 1.00 5466.00 5466

,designed for Indoor Application with IP20 Protection. Magnetic Recess kit for track-

2meter to be provided along with track. The cost of track should include all joint

like Mid joint, End Joint & corner joint & Driver of 48 volt. Reference image is only

for the design intent. Contractor to provide shop drawings and sample for

approvals.or required.

Supply, Installation, Testing and Commissioning of LED Magnetic track channel light

made of white/ Black Die Cast Aluminium Housing. The luminaire should be

designed in such a way for easy to install and removal of track light from channel.

For Aesthetic of interiors the luminaire shall be completely concealed in the false

ceiling. CCT-3000/4000K CRI 80 Tolrence +-2%, System Wattage-18W , 48V DC

Beam Angle 24° DIa - 70mm width- 160mm Length -118mm, Operating Temp.

Range -10°C to +45°C, Luminaire Efficacy >85 lmp & Should be compatible with

Track. Reference image is only for the design intent. Contractor to provide shop

drawings and sample for approvals.or required.

Supply, Installation, Testing and Commissioning of LED magnetic track driver 48 V

200 W.or required.

Supply, Installation, Testing and Commissioning of Accessories Magnetic track I

shape connector.or required.

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of Accessories Magnetic track

channel fixed jointer.or required.

Supply, Installation, Testing and Commissioning of indoor type suspended mounted

1200mm x 50mm x80mm Linear with Aluminium with Black Powder Coating

housing LED light fixture with total system wattage 22W/mtr covered by

Polycarbonate diffuser, prewired electronic driver complete with all accessories

suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be

NS-1.11 SMD type, fixture should have minimum efficacy >=100 lm/W (CCT) of 6500K Each 9.00 6131.00 55179

(optional 3000K & 4000K), input operating voltage range 140V – 270V 50Hz AC CRI

>80 PF≥0.95,THD<10%, surge proctection of >4KV, Flexible Printed Circuit Board

and L70 rated lifetime of 50,000 hours Reverse Polarity & Short Circuit

ProtectioElectrical Class II, with BIS certified LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED.or

Supply, Installation, Testing and Commissioning of indoor type Recess mounted

1200mm x 50mm x35mm Linear with Aluminium with Black Powder Coating

housing LED light fixture with total system wattage 22W/mtr covered by

Polycarbonate diffuser, prewired electronic driver complete with all accessories

suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be

NS-1.12 SMD type, fixture should have minimum efficacy >=100 lm/W (CCT) of 6500K Each 13.00 4728.00 61464

(optional 3000K & 4000K), input operating voltage range 140V – 270V 50Hz AC CRI

>80 PF≥0.95,THD<10%, surge proctection of >4KV, Flexible Printed Circuit Board

and L70 rated lifetime of 50,000 hours Reverse Polarity & Short Circuit

ProtectioElectrical Class II, with BIS certified LM 79 report to be submitted for

luminaire from NABL accrediated lab and LM 80 for LED source issued by LED .or

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of 36 W with 600mm dia Full glow

Ring type suspended functional light in extruded aluminum body, stretch bent with

high precision CNC process, powder coated finish, min system efficacy 100lm/w

@4000k, opal diffuser, THD<10%, CRI >80 PF≥0.95,THD<10%, surge proctection of

NS-1.13 4KV, Metal Core Printed Circuit Board and L70 rated lifetime of 50,000 hours Each 11.00 11682.00 128502

Reverse Polarity & Short Circuit ProtectioElectrical Class II, with BIS certified LM 79

report to be submitted for luminaire from NABL accrediated lab and LM 80 for LED

source issued by LED .or required.

Supply, Installation, Testing and Commissioning of 36 W with 600mm dia Ring type

suspended functional light in extruded aluminum body, stretch bent with high

precision CNC process, powder coated finish, min system efficacy 100lm/w @4000k,

opal diffuser, THD<10%, CRI >80 PF≥0.95,THD<10%, surge proctection of 4KV,

Metal Core Printed Circuit Board and L70 rated lifetime of 50,000 hours Reverse

Polarity & Short Circuit ProtectioElectrical Class II, with BIS certified LM 79 report to

be submitted for luminaire from NABL accrediated lab and LM 80 for LED source

issued by LED .or required.

9.1 Brush Less Direct Current (BLDC) Fan with Remote

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less

Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy)

blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper

winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W)

minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic

Distortion) less than 10%, remote (preferably mobile app based) for speed control

and all remaining accessories including safety pin, nut bolts, washers, temperature

rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V,

50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single

core cable and earthing etc. as required.

1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supply, Installation, Testing and Commissioning of HD Metal Exhaust Fan heavy

NS-2 duty 230V A.C 50 cycles, 450 mm sweep, 1400 rpm, energy efficient, complete Each 6 8,019.00 48,114.00

erected in position with all accessories, as per specification.

Supply, Installation, Testing and Commissioning of heavy duty 450mm Wall Fan

Supplying and drawing co-axial TV cable RG-6 grade. 0.7 mm solid copper conductor

PE insulated , shielded with fine tined copper braid and protected with PVC sheath

in the existing surface / recessed steel / PVC conduit as required.

DSR 1.20 Supplying and fixing of following sizes of of steel conduit along accessories in

surface / recess including painting in case of surface conduit, or cutting the making

good the same in case of recessed as required.

DSR-1.50 Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

DSR-1.50.1 Upto 450 mm sweep Each

Total of Sub-Head - II 236,064.00 470,402.00

DSR-2025 SUB HEAD-III - DISTRIBUTION BOARDS.

Providing and fixing following rating and breaking capacity and pole MCCB with

thermomagnetic release and terminal spreaders in existing cubicle panel board

including drilling holes in cubicle panel, making connections, Ics=100% Icu and

Operational Voltage 690V etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet

steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned

DSR 2.4 copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415

V, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,

din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note :

Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature

circuit breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

DSR 2.10.1 Single Pole Each 108 285.00 30,780.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB

DSR 2.13 DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V,

residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the

existing MCB DB complete with connections, testing and commissioning etc.

Total of Sub-Head - III 109,094.00 -

DSR-2025 SUB HEAD-IV - CABLE TRAYS , RACEWAY , JUNCTION BOX.

DSR 4.1 Supplying and installing following size of perforated pre-painted M.S. cable trays

with perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etc as required.

DSR.4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre. 50 623.00 31,150.00

Hot Dipped Galvanized Iron Cable Tray

DSR 4.6 Supplying and installing following size of perforated Hot DippedGalvanised Iron

cable tray (galvanisation thickness not less than 50 microns) with perforation not

more than 17.5%, in convenient sections, joined with connectors, suspended from

the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

DSR- 4.6.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre 50 754.00 37,700.00

NS-4 Supports, bends, access boxes, tap off boxes and cross over as per site requirement.

(overhead / wall mounted recovery & junction boxes shall be 2.0 mm thick). The

pregalvenised sheet shall be as per IS 277 or BS 2989 having tensile strength of

minimum 500 N/sq.m. and minimum zinc coating of 275 GSM & coupler plate.

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

Supplying, installation, testing & commissioning of Race way made from minimum

2.0 mm thick GI raceway, factory fabricated, with internal partition of the following

sizes including providing removable double folded cover of 2.0 mm thick , knock out

holes and fixing accessories & coupling, earthing stud for terminating 8 SWG copper

earth wire complete as required

NS- 4.1 100 mm wide x38 mm deep in ceiling/floor Metre. 50 611.85 30,592.49

NS-5 Supplying, installation, testing & commissioning of floor/ceiling recessed 2 mm

thick pregavanised sheet outlet junction box including providing cover with

provision to adjust overall height, knock outs on four sides to accept raceways of

specified sizes and cutouts to fix required outlets for following size of race ways

with painted GI plate ( Colour as approved Architect/Consultant).

Total of Sub-Head - IV 68,850.00 32,692.49

DSR-2025 SUB HEAD-V - EARTHING.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,

and providing masonary enclosure with cover plate having locking arrangement and

watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections

etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing

DSR 5.18 along with exiting surface / recessed conduit / submain wiring / cable . as required. Mtr 50 50.00 2,500.00

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for

connections etc. as required.

Total of Sub-Head - V 39,041.00 -

DSR-2025- SUB HEAD-VI: UPS SYSTEM & DIAGONAL LED PANEL.

26.2 Online UPS- Input supply: Three Phase, Output supply: Three Phase.

Supplying, installation, Testing & Commissioning of following capacity at full load

(Unity Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to

26.2.2 20KVA (Each Power module shall be < 10 KVA) Each 1 341,772.00 341,772.00

Supply, Installation , Testing & Commissioning of 43'' diagonal LED Panel, UHD

Resolution, wide color gamut panel, LED backlight, Haze : 1% or better,

NS-7 landscape/portrait, wide array of inputs, 400 nit brightness, Built in Speaker(10W x Each 2 47,220.00 94,440.00

2), fan-less LCD design, Control: LAN/HDMI, RS232 Control with accessories.as

Total of Sub-Head - VI 341,772.00 94,440.00

DSR-2025 SUB HEAD-VII: HVAC SYSTEM (SPLIT AC & CASSETTE AC SYSTEM ) .

D g a y s gned by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

DSR-2025- HI - WALL SPLIT SYSTEMS.

Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type

Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface /

concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile

rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5

Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless

Remote control, suitable for working between 180 260V with low & high voltage

cutoff and 50 hz ,1 phase AC supply capable of performing cooling,

dehumidification, air circulation of following capacity with Scroll / rotary

compressor. The system shall be able to deliver 100% of the rated capacity upto 42

0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both

compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694

or IS 9968 temperature sensing control IS /International Electrotechnical

Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329,

capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS :

1391 Part II 2023. The system shall be able to operate up to 50 0C (out door

ambient temperature).

Inverter Type - Hot & Cold.

32.2.5 1.0 TR with 3 Star BEE Rating . Each 5 38408 192040

32.2.6 1.5 TR with 3 Star BEE Rating . Each 4 41768 167072

DSR-2025 - CASSETTE TYPE SPLIT UNITS .

Supplying, Installation, Testing and Commissioning of Air Cooled Cassette type Air

conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/R-

407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for

400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper

Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular

pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5

Mtr (IDU to ODU) including drain pipe, the system shall be capable of performing

cooling, dehumidification, Air circulation, filteration & ventilation of following

capacity with Scroll/rotary compressor with min 5 year Original Equipment

Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB)

as specified. The system shall be able to deliver 100% of the rated capacity as per

relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from

National Accreditation Board for Testing and Calibration Laboratories (NABL)

accredited as per International Electrotechnical Commission (IEC) 17025

Heating & Cooling

DSR-32.4.7 1.5 TR with 3 Star BEE Rating Each 4 60141 240564

Digitally signed by MAYANK

DSR - Qty DSR-2025 NS Rate (Rs) DSR-2025

Description of items Unit NS Amount (Rs)

2025/NS (Rs.) Amount (Rs)

DSR-32.4.8 2.0 TR with 3 Star BEE Rating Each 1 67052 67052

DSR-32.4.9 2.5 TR with 3 Star BEE Rating Each 3 80764 242292

NS-8 OPPER REFRIGERANT PIPING.

NS-8.1 Supplying, Installation, testing, and commissioning refrigerant copper piping with 601200

insulation as per suitable size in outdoor and indoor areas, etc. as required. Mtr. 360 1670

Total of Sub-Head - VII. 909,020.00 601,200.00

Digitally signed by MAYANK

NBCC INDIA LIMITED

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-

ESTIMATE OF FIRE ALARM

DSR-2025 Amount

DSR- 2025 SUB HEAD-VIII:FIRE ALARM & DETECTION SYSTEM & PA SYSTEM. Unit Qty DSR-2025 (Rs.)

Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with the

following loop modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop and loop length up to 2

km, network communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history log in the non

volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up

with 24 volt sealed maintenance free batteries with automatic charger. The panel

shall have facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete with all accessories .

The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus

over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable

28.2.4 photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on

28.2.5 surface/recessed MS Box having two LED, metallic cover complete with all

connections etc as required. Each 10 306.00 3,060.00

Supplying, installation, testing & commissioning of addressable fire control module

28.2.10 complete as required.

Supplying, installation, testing & commissioning of addressable manual call point

complete as required. Each 2 4063.00 8,126.00

Supplying, installation, testing & commissioning of addressable horn cum strobe

complete as required. Each 2 3682.00 7,364.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with

28.5.2 annealed copper conductor having XLPE insulation , steel wire armouring & FRLS

uuter sheath complete as required. Metre 150 192.00 28,800.00

PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller

with USB, MP3 player (including 6 zone button paging station) with seamless

integration facility with main fire alarm panel for voice evacuation complete as

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker

complete as required. Each 10 1025.00 10,250.00

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt ,

25 V Operating at 240 Volt AC Supply complete as required. Each 1 152368.00 152,368.00

Supplying, installation, testing & commissioning of Voice command keypad 6 zone,

with microphone assembly complete as required. Each 1 85450.00 85,450.00

Total of Sub-Head - VIII. 738641.00

Digitally signed by MAYANK

NBCC INDIA LIMITED

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

SUB HEAD - IX :- IP CCTV ,IPABX/EPABX SYSTEM ,LOCAL AREA NETWORK ( LAN ) ,

ACCESS CONTROL SYSTEM & GALLERY FOR RICE ROOM & MEETING ROOM.

DSR-38 IPABX/EPABX System.

Supplyiing, installation, testing and Commissioning of IP at its core with IP switching

technology and 100% non blocking communication system with 04 Port Voicemail,

04 Port FXS, 04 Port FXO, 1 PRI Trunk lines (30 Channels) Circuit with CLIP Facility, min

100 IP users License with provision for further additions, 100 analog users, 01

Number IP based Operator Console, 45 Party Conference, Speed Dial, Music on

Hold, Internal/ External ring difference, Call Barring, Call Pickup. The system should

be redundant which offer 100% duplication of power supply and CPU card and to

match the hybrid IP-PBX as per technical specification including supporting

accessories etc complete as required. The system should have valid TEC GR approval

Supplying, Installation, Testing & Commissioning of Type 1 IP Phone having 2 VoIP

38.3 account, 120 x40 DOT matrix screen with backlight, Full HD duplex speaker phone, Nos. 9 11698 105,282.00

IPV6, Gigabit Etherent, PoE etc. complete as required.

Supplying, Installation, Testing & Commissioning of Analog phones having standard

38.4 feautres like 16 digit LCD display, 2 way speaker, caller ID and number storage Nos. 25 1544 38,600.00

facility etc. complete as required.

Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted

cable saddles for jumper management, suitable to manage both splices and

terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted

bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for

DSR-2025- 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight

39.21 buffered fiber per adapter, Removable front and rear covers for better access to

interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit

consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord

DSR-2025- should have ETL/UL verification program certificate for compliance with NSI/TIA-

39.12 568.2-D etc. complete as required.

39.12.1 Copper Patch Cords of length 1m (3ft) Nos. 8 151 1,208.00

Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera

Having following specifications and features etc :-

1 Type of Camera: Dome Camera

Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night

3 Signal System: PAL/NTSC

4 Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0 lux with IR or better

Imaging: 1/3s to 1/30000s Shutter Support, Auto Gain Control , White Balance- Auto,

5 Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

On Screen Display: Camera should display Camera title, Date & Time in live &

recorded video both.

7 Signal to Noise Ratio: > 50 Db.

Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto

8 switch, IR Source Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR 30

Mtrs for colour view in night.

Video Compression (Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726,

10 Wide Dynamic Range: WDR (120dB or more) .

11 Digital Noise Reduction: DNR (2D/3D) On/Off .

12 Streaming: Triple streaming, configurable.

Video Streaming & Frame Rates: Triple streaming , configurable Main stream:

5/6MP @25/30 fps, Sub streams: D1@25/30 fps or better.

Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable

through client software or web browser

15 Profile Management: User configuration import, export

16 Security: User Authentication, Water Marking.

Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto

512 GB. It should be supplied with minimum 128GB memory Card.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Recording Management: Format SD, overwrite, storage management, video to NAS

19 Edge Analytics : Tripwire, Intrusion, Motion Detection.

Alarm Trigger : Motion/tampering detection; network disconnection detection; IP

conflict detection; memory card state detection; memory space detection

21 Alarm Support: It should have 1/1 Alarm In/ Out Port.

Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external

22 Mic. and Speaker (As per site requirement) with G.711U/A/ G.711Mu/ AAC/ G.726

audio compression.

Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP,

PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

24 System Capability: ONVIF.

25 VMS: Camera shall support open source VMS.

Cyber Security: trusted boot, AES 256-bit Encryption, Configuration encryption,

26 trusted execution, Digest, security logs, , account lockout, video encryption, IP/MAC

filtering, HTTPS, trusted upgrade.

27 Ethernet: 1 RJ 45 10/100 Ethernet port.

Power Input: The camera should support simultaneous dual power input—12 VDC

28 (via power adapter) and PoE—to ensure continuous operation in the event of a failure

in one power source.

29 Power Requirement: 12VDC/24VDC/PoE (802.3af)/ePoE.

30 Enclosure: IP67 weather proof, IK10.

Operating Condition: Ambient Temperature:- (-) 05°C to 50°C, humidity 95% (max)

(non-condensing).

32 IR life: 40000 hours or higher.

33 Video Bit rate: 32 KBPS - 8 MBPS or better.

34 Standards: BIS with ER, STQC Certified, CE, FCC and RoHS.

40.5.1 6MP IP IR 12 mm fixed lens (as per site requirement) Dome Camera. Nos. 6 12800.00 76,800.00

2025- Network Video Recorder (NVR)

Supplying Installation Testing and Commissioning of following Channel Network

Video Recorder (NVR) with camera licenses to record for all channels having

specifications and features etc as mentioned below :

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses

for number of channels of NVR to record per NVR and to provide a live view, storage

and simultaneously Multi-channel playback of all IP, IR camera or more and must be

ONVIF with minimum support of 256Mbps incoming Bandwidth.

2 NVR should support H.265 or better, H.264, MJPEG, MPEG4 support.

3 Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk.

4 Intelligent auto power on when power resumes after power outage.

5 Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot.

Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x

7 Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0)

8 Video Output Ports: 1x HDMI and 1 VGA.

Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external

sensors and output devices like hooter/ Siren etc.

Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated

10 mobile number for power failure, HDD failure, vandalism, tempring, network

disconnection and panic

Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for

alerts and viewing.

Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS,

12 Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S,

Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need.

13 Standards: CE, FCC, RoHS and BIS Certified.

14 Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply.

Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-

The VMS, NVR application shall support all the features & functionalities of the

offered cameras.

VMS should consist of Base license and Channel Licenses. VMS should be provided

17 with camera Licenses , with no dependency of VMS licenses by binding with the MAC

address of the cameras to achieve the functionality.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

The NVR OEM shall be responsible for providing a mobile application compatible with

18 both Android and iOS devices, enabling remote monitoring and playback of

cameras/NVR footage.

The OEM must provide its own DDNS server hosted in India, eliminating the need for

a public IP address for remote monitoring over the Internet.

Must support Resolution: 7680x4320 (8K), 3840*2160, 1920×1080, 1024×768

21 Must support recording resolution upto 32MP.

22 Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode.

When alarm recording is enabled and an event occurs, you can click the alarm icon on

23 monitoring page to view the alert details. The snapshot function is supported on

monitoring and playback page

The Network Video Recorder (NVR) shall be configured to send email whenever a

system message is created or an alarm event occurs. The email server shall be a valid

SMTP server. Each recipient email address shall be configured to receive any

combination of critical, warning, or informational messages or alarm notifications.

When an alarm occurs, the email message includes the NVR name, time of alarm and

a list of camera that is configured to record upon alarm

It should support Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP,

UPnP, Multi IP Setting. Convert multiple recording files to one avi/MP4 file.

General AI Based Search: Search Pictures by channel, time, event type, target

26 classification (Fall Detection, People Approach Detection, People No. Exception

Detection, People Staying Detection, Violence Detection.

Alarm Notifications based on: Motion detection, video tampering, video loss, scene

changing, PIR alarm, Camera external alarm, Face detection, face recognition,

27 perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis,

crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal

behavior of fan

Alarm Notification should be linked with Recording, snapshots, Camera external alarm

output, buzzer, logs, presets and email.

Built-In Artificial Intelligence: NVR should have built-in AI :-- 2 Channel face

29 detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8

Channel Smart Motion Detection

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Face Recognition Database Capacity: It should support total Blacklist and Whitelist

30 capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face

Face & Human Attributes Search: Search Pictures/ Video by Gender, age group,

31 glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and

ANPR Capability: It should support ANPR Camera with License plate, plate color,

32 vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration

location etc vehicle attributes.

Alarm Notifications based on: Motion detection, video tampering, video loss, scene

changing, PIR alarm, Camera external alarm, Face detection, face recognition,

33 perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis,

crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal

behavior of fan, cybersecurity exception

Alarm Notification should be linked with Recording, snapshots, Camera external

alarm output, buzzer, logs, presets and email.

General AI Based Search: Search Pictures by channel, time, event type, target

35 classification (Fall Detection, People Approach Detection, People No. Exception

Detection, People Staying Detection, Violence Detection.

Smart playback function: Should support smart search for the selected area in the

video and smart playback to improve the playback efficiency

VCA (Video Content Analytic): Should support multiple video contented analytics

based on camera analytics

16 Channel Network Video Recorder (NVR) having display split :- Main screen: 16,

2nd screen: 16 . 12799

Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC

Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber

corning single mode G652D, Cable Type 2mm with Mechanical specification Apex

39.22 Offset < 50 µm, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R Nos. 2 705 1,410.00

<25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C,

Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc

complete as required.

Hard Disk Drive

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying, Installation, Testing and Commissioning following capacity Serveillance

grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk

40.12 Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC,

Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor

Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet with removable side

panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking

completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans,

DSR-2025- minimum 8nos two line cable entry/exit provision at top and bottom with

39.25 rubber protection, Front door 5mm Toughened Glass with MS frame or MS

perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL-

7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units,

3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1

number, etc. complete as required.

Supply, Installation , Testing & Commissioning of 43'' diagonal LED Panel, UHD

Resolution, wide color gamut panel, LED backlight, Haze : 1% or better,

landscape/portrait, wide array of inputs, 400 nit brightness, Built in Speaker(10W x 2),

fan-less LCD design, Control: LAN/HDMI, RS232 Control with accessories.as required.

LOCAL AREA NETWORK ( LAN )

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying, installation, Testing and commissioning of following capacity 24 port Layer

2 indoor Network Switch having features and specifications etc. as mentioned here

under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with

4 X SFP Ports with non-blocking architecture by having Switching capacity of min.

168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console

Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power

supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD,

IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more,

IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper,

39.3 ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN

Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+

Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED,

802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP

Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-

MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL,

SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access

ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted

Telecom Portal of Department of Telecommunication, Government of India etc.

complete as required.

24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each

copper port supporting 802.3at PoE+ min.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying, installation, Testing and commissioning of following capacity 24 port Layer

3 Network Switch having features and specifications etc. as mentioned here under:

At least 20 X RJ-45 Gigabit Ethernet Ports and additional 4 combo 10/100/1000 base-

t/SFP Ports with additional 4 SFP+ ports non-blocking architecture by having

Switching capacity of min. 128Gbps and packet forwarding rate of 95Mpps or higher,

16K MAC table. Console Port, USB port, Internal AC Power supply with operating

temperature of 0 to +50 0C. Stacking port with stacking support of minimum 8 units

per stack. 48K Mac address, 9K or more Jumbo frame, ERPS with enabling ring to

converge in less than 50 ms from node or link failure, Static routing, Static, 6to4,

ISATAP and GRE, IPv6 Neighbor Discovery (ND), BGP, ISIS, MPLS, VRRP v2,

OSPFv2/v3, PBR, Route Redistribution, RIPv1/v2/ng, IP Helper all L3 Protocols should

39.4 support from day 1 for both IPv6 and IPv4, 802.1x, Port security , Radius C TACACS+ Nos. 1 193791 193,791.00

authentication C accounting, DAD, DAI, DoS attack prevention, SSH, Guest VLAN, IP

Access List, MAC Access List. Multicast: VLAN, PIM-SM, PIM DM, PIM- SDM, PIM-

SMv6, DVMRP v3 and MSDP, IGMP C MLD Snooping, Flow mirroring, IGMP C MLD

Snooping Ǫuerier, Per-VLAN IGMP C MLD Snooping. SNMP, Dual configurations,

Multiple images, RMON, LLDP/LLDP-MED, sFlow, DHCP/BOOTP Client, IPv4/IPv6,

Syslog server, Debug command, 802.3ah Ethernet Link OAM, 802.1ag Connectivity

Fault, Y.1731 OAM, 802.1Ǫbb Priority- based Flow Control (PFC), Dying Gasp, Cable

Diagnostics , 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45

access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on

Trusted Telecom Portal of Department of Telecommunication, Government of India

etc. complete as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for

Low Density use having features and specifications etc. as mentioned here under -

Dual-band Wi-Fi6 (802.11ax) 574Mbps (2.4GHz) + 1200Mbps (5GHz), WI-FI 6

Certified, 1 x RJ45 console port, 1G LAN POE Port, factory reset, WPA/WPA2/WPA3™

Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access

control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel,

Works as Access Point, WDS, WDS with AP, Wireless Client, Web (HTTP), Secure

Socket Layer (SSL), Traffic control, Support ATF/Fast Roaming/Band Steering,

Supports enhanced security – WPA-PSK/WPA2 PSK/WPA3-PSK and RADIUS client, and

Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, FCC.

Should also work as Standalone and must be Compatible with S/W & H/W Controller

with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced

Features, Centralized Device Management, Role-Based Administration, Real-Time

Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth

Optimization, Multi-SSID and Captive Portal Authentication.OEM/Product must be

on Trusted Telecom Portal of Department of Telecommunication, Government of

India etc. complet e as required.

Supplying, Installation, Testing and commissioning of CAT6 Copper Information

Outlet (IO) with face plate of color as per site requirement, should have ETL/UL

verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Nos. 70 212 14,840.00

Cable and Components should be from same OEM to maintain compatibility and

interoperability etc. complete as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying and drawing following core Multi mode Fiber Optic Cable having

corrugated steel armoring, leser optimize 50/125 µm with HDPE jacket, LSZH (Low

smoke Zero Halogen), Tight-buffered or loose tube, maximum attenuation: < 3.5

dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at 850 nm, >

500 MHz-km at 1300 nm compliance and certifications: ISO/IEC 11801 Ed. 2.2,

ANSI/TIA-568 C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber shall be Central-

loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC

DSR-2025- 60793 1/60794-1-2, ITU-T-REC G.652D and Telecordia GR 20-core, High quality Electro

39.20 Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating

ambient Temperature should be – 5 0C to +50 0C and Storage Temperature should be

– 5 0C to +50 0C, Maximum Attenuation ± 3.5 dB/km at Operational Wavelength 850

nm and ± 1.5 dB / km at Operational Wavelength 1300 nm . type of fiber should be

50/125 / G.652D & Refractive Index should be 1.483/1.478, The value for Mode-

filed,Cladding Diameter 50 ± 2.5 µm and 125 ± 1µm correspondingly i/c splicing &

marking etc complete as required.

39.20.1 6 Core Multi Mode Optical Fiber Cable Meter. 350 87.00 30,450.00

DSR-41 ACCESS CONTROL SYSTEM .

DSR-41.1 Access Control System with Face recognition.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supplying, Installation, Testing and Commissioning of Access Control System

comprising of Face and fingerprint Recognition, Smart Card, QR Code, NFC & PIN

Code based Reader, following sizes of 5” IPS TFT Touch Screens, 1GB RAM, 8 GB

ROM, Live Face Detection with anti-spoofing against 2D photograph, mobile selfie &

video, Fake Fingerprint and face Detection Technology, 30,000 Face storage (1:N) /,

3,000 fingerprint (1:N), QR code 30,000, 30,000 card storage (1:N), 2 lakh transaction

storage, 20,000 image logs, onboard dual camera (colour & IR) Primary camera min

Support authentication & verification from up to 1 meters, Communication protocols

WiFi, TCP/IP, Wiegand Out, Wiegand IN, USB, MQTT protocol, Blacklist Employee

Management, User wise authentication modes; Built in Lock Control, Mask Detection

& Alert (configurable), 40 to 30,000 lux illumination, IP65 for Ingress rotection,

Certification: CE, FCC, BIS, ROHS, etc. Metal Enclosure with battery backup, suitable

for mounting on metal surface/metal frames/ wooden frames/wall/flap barriers

including all mounting bracket & accessories complete etc. as required.

41.1.1 5" IPS TFT Touch Screen Nos. 3.00 58,306.00 174,918.00

2025- Electromagnetic locks.

Supplying, Installation, Testing and Commissioning of Electromagnetic locks (fail safe

type) for following type of Doors suitable for operation on 12 V DC having holding

force 600 lbs for Single Leaf Door and 1200lbs for Double leaf door with suitable

feedback i/c connection complete etc. as required.

41.6.1 Single leaf door Nos. 1 4,831.00 4,831.00

41.6.2 Double leaf door (Each leaf 600lbs & Total 1200 lbs). Nos. 2 7,593.00 15,186.00

DSR- Exit Push Button .

Supplying, Installation, Testing and Commissioning of Heavy Duty SS Finish Exit Push

Button for releasing access doors with all necessary installation accessories i/c Nos. 3 1,173.00 3,519.00

connection complete etc. as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

DSR- Door Position Sensor .

Supplying, Installation Commissioning of Door Position Sensor i/e connection

complete etc. as required.

NS-2 GALLERY FOR RICE ROOM & MEETING ROOM.

GALLERY FOR RICE ROOM.

Supply, Installation, Testing and Commissioning of 86” Screen Size 4K UHD (3840 x

2160 Display resolution) professional Interactive display, It shall have the Brightness

of400 nits or higher, It shall have the Multi touch upto 20 Points or more,

exceptionally bright 4K HDR professional display with unique Deep Black Non-Glare

technology. It shall have 4 x HDMI Input interface or more. as required.

NS-2.2 Supply, Installation, Testing and Commissioning of OPS Computing modules,Intel i5 Each 1 74,862.00 74862.00

processor RAM - 8GB, 128GB SSD, Windows 11 Professional. as required.

Supply, Installation, Testing and Commissioning of Two Way Wall Mount Speakers

which shall have 5.25" LF Driver and 1"HF Driver. It shall have frequency response of

60 Hz to 20,000. It shall have 4 Ohm impedance as well as 70V,100V tapping. The

speaker shall have a maximum SPL of 104dB. The Speaker shall have 60 Watts or

more Dynamic Power (Lo Impedance). It shall have a Transformer tapping of 30,15,7.5

Watts &4/8 ohm or more.The OEM Shall have CE, ISO 9001:2015 (Quality

anagement), ISO 14001:2015 (Environment Management, ISO 27001:2022

(Information Security Management), ISO 50001:2018 (Energy Management)

Certificates. All Certificates to Be attached. as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supply, Installation, Testing and Commissioning of It shall be 240 Watts or more

Mixing Amplifier. It shall have Microphone frequency response of 80Hz- 17000Hz or

better. It shall have a Line Frequency Response of 80 Hz-18000 Hz or better. It shall

have minimum impedance load bridged of 4 ohms per channel. It shall have 4 or more

balanced microphone inputs. It shall have up to 48V phantom power individually for

four microphone inputs with On/Off. It shall have 2 or more line inputs. It shall have 1

Line output or better. It shall have input sensitivity of ± 5 mV/ 600Ω for balanced

Microphone inputs. It shall have input sensitivity of 350mV/10kΩ for unbalanced Aux

input. It shall have an output sensitivity of 1000mV/470Ω for record output. It shall

NS-2.4 have 100V line as well as 4 to 16 ohm impedance output. It shall have THD of >0.1% at Each 1 103,655.00 103655.00

1 KHz, 1/3 rated Power or better. It shall have Microphone input overload of fifteen

db or greater. The microphone inputs shall override over other audio inputs by 30 dB

attenuation via switch. It shall have a gain control of ± 2.5mV to ± 75mV@ 30dB. It

shall have a cross talk of ≥ 50 dB or better. It shall have high temperature, overload

and short circuit protection. It shall get operated from AC as well as DC.The OEM Shall

have CE, ISO 9001:2015 (Quality Management), ISO 14001:2015 (Environment

Management, ISO 27001:2022 (Information Security Management), ISO 50001:2018

(Energy Management) Certificates. All Certificates to Be attached. as required.

Supply, Installation, Testing and Commissioning of a Digital podium helps to simplify

events by incorporating various multimedia and AV devices in single platform.It shall

have in-built 21.5" touch screen monitor with HDMI & VGA Interface. It shall have

Hydrolic Up/Down buttons for touch monitor height adjustment.It shall have

HDMI,VGA & Audio faceplate. It shall come with a 1x4 4K UHD HDMI splitter. It shall

have single power button to On/Off the Digital Podium with Light indicator.It shall

have Key Board/Mouse tray and sliding top tray for Laptop. It shall have 1 Gooseneck

Microphone with Mute & Unmute Button. It shall come with HDMI, VGA & USB patch

cable connecting for touch monitor. It shall have Integrated Visualizer Tray, It shall

have Single Lock System to Lock the Keyboard tray, Door lock and the Slider.

Equipments rack space. It shall have a 6 port PDU & a cooling fan. as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supply, Installation, Testing and Commissioning of It shall consist of receiver Unit with

Two USB 2.0 Wireless Transmitters. It shall be able to connect 28 or more

Transmitters. It shall have a communication bandwidth of 300 mbps or more. It shall

support signal transmission up to 35 meters or better. It shall support wireless touch

operations if interactive device is connected. It shall support platforms like ipad, iOS,

Mac, Windows or more. It shall support 1080p or more resolutions. It shall work as

wireless switcher with 2x1 Switching. It shall have HDMI Output Port, Audio Output

Port. It shall have USB Data Port for Touch Screen and USB 3.0 Port and RJ-45 for

Communication. It shall be able to provide the Internet access to the mobile devices

that are connected to its Hotspot by connecting itself to the customer network and

then routing it to the connected devices.CE, RoHs, FCC, ISO 9001:2015 (Quality

Management), ISO 14001:2015 (Environment Management, ISO 27001:2022

(Information Security Management), ISO 50001:2018 (Energy Management). as

Supply, Installation, Testing and Commissioning of HDMI matrix switching system

which shall have 8 HDMI 2.0 Inputs with 3.5mm Audio Embedding interface for each

input. It shall have 8 HDMI2.0 Outputs with 3.5mm audio de embedding interface for

each output. It shall support 480i, 576i, 480p, 576p, 720p, 1080i,

1080p@24/30/50/60Hz, 4K@60Hz or better. It shall have 1x RS-232 In, 1x RS-232 out

and 1x RJ-45 interface. It shall support controlling through IR remote, front buttons

NS-2.7 control, RS232, UDP. It shall support LPCM 7.1CH, Dolby TrueHD, Dolby Digital and Each 1 172,758.00 172758.00

DTS-HD Master Audio. It shall support smart EDID management, including 8-output

EDID. It shall support HDMI2.0, HDCP2.2. It shall support RS-232 and TCP/IP Control.

Human-body: ± 8kV.CE, ISO 9001:2015 (Quality Management), ISO 14001:2015

(Environment Management, ISO 27001:2022 (Information Security Management), ISO

50001:2018 (Energy Management). as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supply, Installation, Testing and Commissioning of 72' HDMI Active Optical Cable Type

A to Type A. It shall support resolutions of up to 8k@60 Hz or better. It shall have a

Power Consumption of 250mV or better. It shall have a dynamic bend radius of 40mm

or better. It shall have a static bend radius of 20mm or better. It shall support eARC &

CEC. It shall be HDMI 2.1 or better. It shall support HDCP 2.2 or better. It shall have an

NS-2.8 outer diameter of 4.4mm or less. It shall be highly resistant with RF and EMI Each 2 40,310.00 80620.00

interference. It shall work without the use of External Power Supplies..The OEM Shall

have CE, ISO 9001:2015 (Quality Management), ISO 14001:2015 (Environment

Management, ISO 27001:2022 (Information Security Management), ISO 50001:2018

(Energy Management) Certificates. All Certificates to Be attached. as required.

Supply, Installation, Testing and Commissioning of 55' HDMI Active Optical Cable Type

A to Type A. It shall support resolutions of up to 8k@60 Hz or better. It shall have a

Power Consumption of 250mV or better. It shall have a dynamic bend radius of 40mm

or better. It shall have a static bend radius of 20mm or better. It shall support eARC &

CEC. It shall be HDMI 2.1 or better. It shall support HDCP 2.2 or better. It shall have an

NS-2.9 outer diameter of 4.4mm or less. It shall be highly resistant with RF and EMI Each 1 21,883.00 21883.00

interference. It shall work without the use of External Power Supplies..The OEM Shall

have CE, ISO 9001:2015 (Quality Management), ISO 14001:2015 (Environment

Management, ISO 27001:2022 (Information Security Management), ISO 50001:2018

(Energy Management) Certificates. All Certificates to Be attached. as required.

Supply, Installation, Testing and Commissioning of 12' HDMI Active Optical Cable Type

A to Type A. It shall support data rate of up to 18 Gbps. It shall support resolutions of

up to 4k@60Hz 4:4:4 or better. It must have connector size of 25mm or less. It shall

have a dynamic bend radius of 90mm or better. It shall have dielectric strength of

NS-2.10 500V/minute. It shall be HDMI 2.0 or better. It shall have insulation impedance of Each 3 4,031.00 12093.00

100Ω or better. It shall have an outer diameter of 4.3mm or less. It shall be highly

resistant with RF and EMI interference. It shall work without the use of External

Power Supplies. as required.

DSR-2025 DSR-2025 NS Amount

2025/NS Description of items Unit Qty NS Rate (Rs)

(Rs.) Amount (Rs) (Rs)

Supply, Installation, Testing and Commissioning of 55" 4K display panel boasts a

diagonal screen size of 55 inches, providing a stunning visual experience. With a

resolution of 3840 × 2160 pixels, shall offer a sharp and detailed picture quality. The

display's brightness shoube be 350 cd/㎡ or better, shall have 1200:1/3000:1 or

better contrast ratio. ensuring vibrant and vivid colors. The viewing angle shall be

NS-2.11 wide, allowing for clear visibility from both horizontal and vertical perspectives at Each 3 87,531.00 262593.00

178° each. For connectivity, the panel shall include two or more HDMI inputs, 2 x USB

2.0, Additionally, it shall have one 3.5 mm Stereo Audio output for easy connection

to external audio devices. The display shall have built-in speaker system delivers

powerful sound with a total output of 10 W, Certificate: CE, FCC, BIS, UL etc complete

with standard accessories. as required.

Total of Sub-Head - IX. 2,411,101.00 1,720,091.00

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor,

August Kranti Marg, New Delhi-110016

AMOUNT (IN RS.)

S.N DESCRIPTION

A. SUB HEAD -I : SANITARY FIXTURES & FITTINGS 65,879.36 192,102.00

B. SUB HEAD-II- SOIL , WASTE & VENT PIPE - 33,007.00

C. SUB HEAD- III - INTERNAL WATER SUPPLY 22,030.94 49,514.00

Digitally signed by MAYANK

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

RATE (RS) AMOUNT

RATE:(Multiplying

DSR- factor to bring

DESCRIPTION OF ITEMS UNIT QTY DSR - DSR2023 rates with

2023/MR NS DSR-2023 NS

2023 0.973 GST Correction

A. SUB HEAD -I : SANITARY FIXTURES & FITTINGS

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with

17.10 C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets,

cutting and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and

17.22A as per the direction of Engineer-in-charge. Each 8 1,034.80 1037.07 8,296.53

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

17.31 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with Each 4 1,607.95 1611.47 6,445.89

C.P. brass screws and washers complete.

17.34 Providing and fixing toilet paper holder :

Providing and fixing white vitreous china battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250

17.80 ml & 500 ml consumption), having water inlet from back side, including fixing to wall Each 2 7,979.20 7996.67 15,993.35

with suitable brackets all as per manufacturers specification and direction of Engineer-

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size

75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the stone in the chase with

8.10 epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished

8.10.2 Granite Stone of approved shade Sqm 2 4,051.85 4060.72 8,121.45

RATE (RS) AMOUNT

RATE:(Multiplying

DSR- factor to bring

DESCRIPTION OF ITEMS UNIT QTY DSR - DSR2023 rates with

2023/MR NS DSR-2023 NS

2023 0.973 GST Correction

18.21 Providing and fixing unplasticised P.V.C. connection pipe with brass unions:

18.21.1 30 cm length

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

18.53 approved quality conforming to IS:8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved

18.53A make and quality as per direction of Engineer-in-charge. Each 10 74.80 74.96 749.64

Providing and fixing Rimless,Wall Hung WC with UF soft close slim seat cover, hinges,

accessories set, size: 380x515x360 mm ,concealed flushing cistern & flush plate with

wall mounting frame, Installation kit and “P-Type” drain pipe connection set

complete in all respect as per the direction of Engineer-in-charge.

Providing and fixing health faucet (ABS body) ,1 meter long spirochrome flexible tube

& wall hook as per direction of Engineer-in-charge.

Providing and fixing table top wash basin (425x340x175 mm ) with all fixing

NS-3 accessories along with C.P Brass pillar cock with extension body complete in all Each 4 4,982.00 19,928.00

respect as per direction of engineer-in-charge.

Providing and fixing C.P. brass sink cock with pipe swinging spout wall mounted with

NS-4 wall flange complete in all respect. Each 2 1,982.00 3,964.00

Providing and fixing stainless steel waste coupling 32 mm dia full thread with 80mm

NS-5 height complete in all respect. Each 4 606.00 2,424.00

Providing and fixing liquid soap dispenser with glass bottle including all fittings

complete in all respect.

Providing and fixing stainless steel hinge type grating with frame for floor traps or

NS-7 drains of required pattern complete in all respect. Each 10 771.00 7,710.00

RATE (RS) AMOUNT

RATE:(Multiplying

DSR- factor to bring

DESCRIPTION OF ITEMS UNIT QTY DSR - DSR2023 rates with

2023/MR NS DSR-2023 NS

2023 0.973 GST Correction

Providing and fixing Flash touch-free infrared hand dryer with 1150W rated power &

NS-8 carbon brush motor ,material: 304 stainless steel,finish: stainless steel complete in all Each 4 10,955.00 43,820.00

TOTAL OF SUB HEAD - I 65,879.36 192,102.00

B SUB HEAD-II- SOIL , WASTE & VENT PIPE

Providing and fixing unplasticised rigid PVC pipe for soil & waste conforming to IS :

13592 Type B,including all fittings (IS: 14735 ) e.g. bends, junction, cowls, offsets,

access pieces, jointing with solvent cement joints including cutting chase or holes in

walls and floors and making good wherever required complete in all respect.(i) Single

socketed pipes.

Providing & fixing in position upvc P" trap of self cleaning design of following sizes

for the embedded areas Making proper connection with chemical sealent joint ,

cutting chase / hole in floors /slabs and bringing the same in proper condition in

cement concrete 1:2:4 mix complete as required. including cost of cutting and making

good the walls and floors where required.

110 mm inlet and 110 mm outlet

Providing and fixing upvc cleanout plug( Ceiling or Floor) with suitable insert keys for

NS-11 opening, male threaded joint with upvc socket fixed to uPVC pipe complete in all

a) 110 mm diameter Pipe Each 7 183.00 1,281.00

Providing and fixing uPVC waste pipes for wash basin , sink , urinal (IS: 4985 ) 6 Kg /

Sqcm including all fittings (plain or door) e.g. bends, junction, cowls, offsets, access

pieces, jointing with rubber ring/solvent cement joints including cutting chase or

holes in walls and floors and making good wherever required.

a) 40 mm OD pipe Page 3 Metre 8Digitally signed by MAYANK 197.00 1,576.00

RATE (RS) AMOUNT

RATE:(Multiplying

DSR- factor to bring

DESCRIPTION OF ITEMS UNIT QTY DSR - DSR2023 rates with

2023/MR NS DSR-2023 NS

2023 0.973 GST Correction

TOTAL OF SUB HEAD - II 0.00 33,007.00

C SUB HEAD- III - INTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded fittings

i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia .Pipes. Metre 4 497.80 498.89 1,995.56

18.8.2 20 mm nominal outer dia .Pipes. Metre 24 537.60 538.78 12,930.66

18.8.3 25 mm nominal outer dia .Pipes. Metre 5 627.25 628.62 3,143.12

18.8.4 32 mm nominal outer dia .Pipes. Metre 2 739.30 740.92 1,481.84

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

18.17 (screwed end) :

Providing and fixing water purifier (RO) of 25 ltr/hour with minimum tank capacity of

NS-13 6 ltr.complete in all respect . Each 2 24,757.00 49,514.00

TOTAL OF SUB HEAD - III 22,030.94 49,514.00

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg,

New Delhi-110016

SUB HEAD DESCRIPTION DSR-2025 (E & M) AMOUNT NS

A SUB HEAD - A : PIPING HYDRANT & ACCESSORIES SYSTEM 257,691.00 135,294.00

GRAND TOTAL 392,985.00

GRAND TOTAL 392,985.00

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

RATE AMOUNT (RS)

NO.DSR 2025 DESCRIPTION OF ITEMS UNIT QTY DSR-2025 (E&M) DSR-2025

RATE (RS.) (E&M)

A PIPING, HYDRANT , AND ACCESSORIES SYSTEM

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees,

27.7 flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

27.11 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories:

27.21.1 Pendent sprinkler Nos. 44 599.00 26,356.00

27.21.2 Upright sprinkler Nos. 10 599.00 5,990.00

27.21.3 Side Wall sprinklers Nos. 4 699.00 2,796.00

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

RATE AMOUNT (RS)

NO.DSR 2025 DESCRIPTION OF ITEMS UNIT QTY DSR-2025 (E&M) DSR-2025

RATE (RS.) (E&M)

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL

Listed) of stainless steel complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female

thread with reducer, nipple, 2 side brackets, center bracket, stockbar of

following sizes complete as required

Providing, installation, testing & commissioning of adjustable rosette plate for

15mm dia in white finish UL Listed or FM approved complete as required

NON-SCHEDULED ITEMS

Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless

cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn

and wheel type valve with initial Charge as per IS: 15683:2018 specification,

bearing ISI Mark and approved.

ABC Stored Pressure type Fire Extinguisher 6 Kgs. capacity bearing ISI Mark for

Fighting ABC Class of Fire. The Extinguisher will be Manufactured Strictly as per

BIS: 15683:2018 bearing ISI. mark. MAP 40% a) In built NRV on valve to cross

NS-2 check internal pressure. 4 3,993.00 15,972.00

b) Operating temperature marking on valve.

c) Automatic safety release valve.

d) Non Returnable Valve

Water Stored Pressure type Fire Extinguisher, 9 Litre’s capacity Fire

NS-3 Extinguishers.The Extinguisher will be Manufactured Strictly as per BIS: Each 4 3,641.00 14,564.00

15683:2018 bearing ISI. mark.

NAME OF THE PROJECT: Fabrication and Interior Work of APEDA Office Premises at NCUI Building, 2nd Floor, August Kranti Marg, New Delhi-110016

RATE AMOUNT (RS)

NO.DSR 2025 DESCRIPTION OF ITEMS UNIT QTY DSR-2025 (E&M) DSR-2025

RATE (RS.) (E&M)

5 Kg Ceiling Mounted Fire Extinguisher Clean Agent HFC, Zero ODP, Stored

PressureType, Pressure Gauge, Gross Weight 7.7 Kg, empty Weight 2.7 Kg, Can

Height 267MM, Diameter 230MM, Discharge Time less than 8 Secs, Auto

NS-4 discharge mechanism on temperature rise, applicable on Class A,B,C and Each 2 32,649.00 65,298.00

electrically started Fire, Can Construction : Valve Construction : Forging &

Machining, Internal Coating of Can : Epoxy Powder coating, Sheet metal

thickness : 1.60 MM

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD (B) 257,691.00 135,294.00