MISC REPAIR TO LIFTS INSTALLATION AND OTHER CONNECTED ITEMS AT VARIOUS LOCATION UNDER GE UTILITY PLANT AND MACHINERY DELHI CANTT-10

Amount

Taking down old damaged cement plaster of any description including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work set in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving not exe 15 cm thick (below or above ground level) and including removing of demolished material from site complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully steel window/ventilators including shutter, grill and glass panes of any size and making good to the damaged/ disturbed surfaces while cutting holes complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully steel door including shutter of any size and making good to the damaged/ disturbed surfaces while cutting holes complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick in Cement Mortar (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for three coats of white wash on wall of new plastered surfaces including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Supplying and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed by Engineer-in-Charge.

Supplying and fixing 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane upto four storied of building complete all as specified and as directed by Engineer-in-Charge.

Supplying and fixing in repairs of mild steel pressed handles 100mm long, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-Charge.

Supplying and fixing in repairs of mild steel mortice lock, vertical type, size 100 mm , 4 lever complete all as specified and as directed by Engineer-in-Charge.

Materials and labour for brick work with well burnt bricks, locally available best quality (Sub class 'B') bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregates) as in floor surfaces finished even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Steel door with 1.25 mm thick PGI sheet including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 2 coats of synthetic enamel paint over a coat of red oxide primer (1st grade quality) on steel surface front and back including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel railing and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

M & L for painting on lift door and cabin steel surfaces and proper covering of COP,handrails,mirrors display board etc including preparation of old steel surface of door and cabin girth and applying two coat of synthetic enamel paint( Ist grade quality) description over location width by spray painting including making goods all distrubed surface of door/cabin complete all as specified and as directed by Engineer-in-Charge.

M & L for painting on lift electric LT Panel / main Lift control panel on out side MS/steel surfaces including preparation of old steel surface of panel door and applying two coat of synthetic enamel paint( Ist grade quality) description over location width by spray painting including making goods all distrubed surface of panel complete all as specified and as directed by Engineer-in-Charge.

M & L for painting of motor with gear assembly complete including ISMB (capacity 4 KW to 12 KW) installed in machine room of lift installation with two coats synthetic enamelled sky blue paint also where black paint is required and write the SM No on motor and panel with superior quality of synthetic enamelled white paint after scratching the old paint and preparing smooth surface suitable for painting complete all as specified and directed Engineer-in-Charge.

Supply & Fixing of display board of " NOT TO USE LIFT IN CASE OF FIRE" as per sample made out off acrylic board of 3mm thick of size 20cm x 35cm and font colour should be visible in day light as well as in dark for electrical passenger lifts at each floor infront of lifts entrance door including taking down old Unsv/Detached board complete all as specified and directed Engineer-in-Charge.

Supply & Fixing of display board of " SAFETY MEASURES" mentioning (Smoking in elevator prohibited, No Dogs allowed,CAUTION) as per sample made out off acrylic board of 3mm thick of size 20cm x 35cm and font colour should be visible in day light as well as in dark for electrical passenger lifts in each lift cabin including taking down old Unsv/Detached board complete all as specified and directed Engineer-in-Charge.

Supply & Fixing of display board of " FIRE EXTINGUISHER" as per sample made out off acrylic board of 3mm thick of size 15cm x 15cm and font colour should be visible in day light as well as in dark for electrical passenger lifts in each lift cabin including taking down old Unsv/Detached board complete all as specified and directed Engineer-in-Charge.

Supply & Fixing of display board of " MACHINE HISTORY " as per sample made out off acrylic board of 3mm thick of size 60cm x 80cm mentioning all details of lifts machine SM/MES NO , date of instalation, capacity ,Make, initial cost ,type etc for each electrical passenger lifts in each machine room including taking down old Unsv/Detached board complete all as specified and directed Engineer-in-Charge.

Tushar engineers