REPAIR/ REPLACEMENT OF FLOOR, WALL, ROOF SHEET, WALL AND FLOOR FINISHES, JOINERY ITEMS, PLUMBING, ROOF TREATMENT AND CERTAIN MISC MAINT, REPAIRS IN MD AND OTM ACCN OF ASC BN (MT) TA BN PUNJAB AND TRANSIT CAMP AT MIL STN KALKA UNDER GE JUTOGH

Amount

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface mixed with liquid water proofing compound as per manufacturer's instruction finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.

Demolition of (reinforced) cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Use and waste of form work to soffit of chajjas, shelves troughs and similar items including edges for fair finished surface complete all as specified and directed.

M&L for RCC 1:1.5:3, type A-1 using 20mm graded crushed stone aggregate as in chajja complete all as specified and directed.

S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding and, removing rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic colored tiles on verticle surface such as skirting/dado etc. 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles.over Including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick square/rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for 18-22 mm thick machine cut kota stone slab, edge cut by machine (in one colour) as in flooring over and including 15mm thick screed bed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed including demolition of old slab and removing of debris off the premices.

M&L for 18-22mm thick machine cut kota stone slab, pre-polished (mirror finish) as in riser of step/ skirting/ vertical surfaces step over an including 10 mm thick rendering in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.

M&L 18 to 20 mm thick machine cut polished Baroda Green Marble (Table rubbed and polished) cooking platform, sheves, RCC counters, window cills and like over and incl 10 mm thick screed bed in CM 1:4 jointed with adhesive for stone and pointing in white cement using marble dust with admixture of pigment to match the shade of stone complete all as specified and directed.

Rounding to edges of granite stone slab one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

Taking down of cement plaster on walls and ceiling of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete surface in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over and incl for applying 2-3 mm thick layer of wall care putty and a coat of primer complete all as specified and directed.

M & L for preperation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of cement base paint incl preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of oil bound distemper over a coat of primer incl preparation of surface complete all as specified and directed.

M&L for applying two coats white wash on old treated plastered surfaces of ceiling, incl preparation of surfaces, complete as specified and directed.

M&L for applying one coat of oil bound distemper on old treated surfaces of wall, incl preparation of surfaces, complete as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening after necessary repair complete all as specified and directed.

S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

M&L for 35mm thick flush shutters, solid core construction, with particle board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed & skeleton shutters,open rebated & prepare to receive gauge, divided into squares, with plain, chamfered and rounded, mitred and rebated sash bars, any numbers members of shutters as specified SSR Pt-I , clause 8.24(a) complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stile) with 2, 4 or 6 raised panels designed with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm prelaminated PVC sheet on back face, supplied and fixed to frame at site as per specification and drawing , complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay with glazing bars, complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay without glazing bars, complete all as specified and directed.

S&F steel window or ventilators, fixed type, with galzing bar complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S& F galvanised mild steel wire cloth 0.56mm nominal dia or wire and average width or aperture 1.18mm and fixed with stainless steel wire staple in complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, cast type, anodised fixed complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated , etc) sheets n roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

Dismantling timber scantlings framed 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates incl welding etc of grade Fe-410 (Gde E-250) quality B complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel frame complete all as specified and directed

S& F in repair stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified.

S&F in repair stainless steel tubing of 25mm dia chromium plated min 1mm wall thickness as in curtain rod complete incl supply and fix 02 Nos stainless steel brackets and finials fency type, stops fixed with as screws etc complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site o complete all as specified and directed.

S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 15 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.

S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 20 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover white/ coloured closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap complete all as specfied and directed.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580x450 mm white with integral foot rest or back inlet and making good the floor with PCC 1:2:4 type B-1 complete all as specified and directed.

S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.

S&F in repairs Health Faucet (ABS body) with 1.25 mtr long metalic expandable tube & hook complete all as specified and directed.

S&F in repairs PTMT jet spray with 1mtr long PVC tube suitable for EWC, complete all as specified and directed.

S&F in repair toilet paper holder,chromium plated with flat recessed type stainless steel, fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 440mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F in repair chromium plated brass basin mixer for mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.

S & F in repair 15mm bore bib tap fancy type chromoim plated long body cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stainless steel grating openable type 100mm dia with/ without hole complete all as specified and directed

S & F in repair stop/angle valve of PTMT any colour 15mm bore high pressure screwed for iron pipe complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy fancy type chromium plated screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair brass chrominum plated shower rose 125mm size and 30cm long CP brass pipe with or without swivel joint incl fixing to steel pipe of size 15mm bore complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 8mm thick sheet glass shelf 300x300mm as in corners with bevelled edges/ hatching of edges fixed with stainless steel D bracket guard and railing complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP guard and railing 60cm long complete all as specified and directed.

S&F in repair vitreous china soap dish approx size 160x 60x 90mm thick fixed to wall with chromium plated brass screws and cup washer complete all as specified.

S&F in repair Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling and waste pipe complete all as specified and as directed .

S&F in repair PVC cabinet with looking mirror of size 350x450mm fixed to wall with wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.

Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store (measured overall as fixed along the center line over fittings and accessories complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR), Junction, (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), Junction (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair Salt-glazed stone ware gully traps, 150x150mm, square or round mouthed, type `P' PVC (SWR) setting and jointing with cement complete all as specified and directed.

Dismantling water tanks exc. 250 ltrs & n. exc. 500 ltrs capacity and removing from site complete all as specified and directed

Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed

S&F rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

Refixing of rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.

Refixing of rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.

S&F ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed 20mm bore complete all as specified and directed

S & F 20mm Gun metal gate valve ,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 15mm Gun metal gate valve ,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for precast cover slab in RCC 1:2:4, B-1, using 20 mm graded crushed stone aggregates for man holes set in CM 1:6 complete all as specified and directed.

S&F MS TMT bar 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs, incl cleaning of bricks/ tiles and removal of unserviceable from site, incl wire brushing and cleaning the roof surface with water, incl flashings and junction of parapets, etc., complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for roof treatment, cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:- (a) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) Applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required and dorected. (d) Applying aluminium paint @ 0.20Kg/Sqm.

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone agg as in roof kerb or mud stopes, padding on roof etc finished even and fair, average thickness as required to maintain proper slope complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces of roof finished even and smooth without using extra cement mixed with and including water proofing compound of approved make as per manufacturers instructions on existing roof surfaces complete all as specified and directed.

S&F in repair 45 cm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of walls and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width & girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width & girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for granite (of any type) 19-20 mm thick in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match cutting and polishing complete fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

R. P. Suppliers and Construction Co.

S.R.SHARMA & SONS