Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | ₹30.6 L | L1 | Accepted-AOC lowest rate quoted by the tenderer hence the tender is accepted |
| 2 | L2₹30.7 LRejected-AOC | ₹30.7 L | L2 | Rejected-AOC higher rate quoted compared to lowest tenderer quoted rate |
| Sl No | Description | Qty | Unit | SRI KALIGAMBAL BUILDERS L2 | SLN Builers L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and placing "UPBEAT"desk based modular PENTA WORKSTATIONS - 1500 x 1500 workstation with System ht - 1200 mm.MAIN SCREEN: SANDWICH GLASS RETURN SCREEN: FABRIC MAGNETIC LEGS: Providing metal powder coated Cube leg. Legs are for standard workstation height of 750mm. UNDERSTRUCTURE: Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.WIRE MANAGEMENT: For 750 high workstations- For vertical wiremenagement, Shared legs / wire risers with cover are considere. For horizontal wiremanagement - Wire Tray with integrated power box. Access flap will be provided. Switch plate of (8+3 Anchor Roma) module is considered for Power and Data points.MODESTY :Metal modesty: Lazer cut perforated Metal modesty Metal modesty are mounted on the worktop with the help of the modesty mounting brackets Modesty terminates at 400 mm from ground. Pedestal - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray - Metal | 14 | No | 56,500 ₹7.9 L | 56,150 ₹7.9 L |
| 2.00 | Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. FIXED ARMRESTS: The assembly should be having Fixed arm rest structure moulded in glass-filled Poly-amide. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm .PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal .Overall Dimensions of ChairSeat Height - min 44.5 to max 53.8 cm.Height - min 99.5 to max 108.8 cm.Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. | 14 | No | 14,900 ₹2.1 L | 14,848 ₹2.1 L |
| 3.00 | CHAIRMAN ROOM MAin DEsk (Main Desk+ERU+Mobile Pedestal) The Main table shall be of size 2795 Width mm x 1050 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in Smart Case - space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground with castors).The main desk is provided eith the wire management system also there is perfect storage side unit . | 1 | No | 4,72,900 ₹4.7 L | 4,72,800 ₹4.7 L |
| 4.00 | Supply of Arrive e Back unit of the size shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H. | 1 | No | 78,400 ₹78,400 | 78,350.4 ₹78,350.40 |
| 5.00 | CHAIRMAN ROOM CHAIR Posture Perfect High Back Standard Leather SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.*Seat SIZE: 45.5cm. (D) x 52.4cm. (W)BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner.*HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D)ARMRESTS: The armrest having four range of adjustment· Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly.· Up-Down adjustment has 8 position (10.5±0.5cm range)· Arm top swivel adjustment- 2 position, 12°±2° swivel inside· Arm top width adjustment - Any position (2.0±0.5cm range each arm top)· Arm top To - Fro Adjustment- any position (4.0±0.5cm range)· Armrest top is made up of high density PU molded over glass filled Poly-amide inner.POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features:· 360° revolving type.· Forward tilt of sesat and back.· Upright tilt lock.· Tilt tension adjustment can be operated in seating position.· 3-position Tilt limiter.SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. | 1 | No | 1,05,100 ₹1.1 L | 1,05,060 ₹1.1 L |
| 6.00 | Supply of LA SEDE Visitor SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece.Overall Dimensions of Chair Seat Height -46.2 cm.Height -98.2 cm.Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm | 3 | No | 38,100 ₹1.1 L | 38,053.2 ₹1.1 L |
| 7.00 | Supplying and Fixing of L shape Director' Desk of Large of Size 2800 mm x 2330 mm x 770 mm height which is made of up engineered wood of Red - Cherry Colour , Knock Down Assembly type including material, transport and delivery Charges. The Engineered wood is made of binding or fixing the Strands,particles, fibres or veneers or boards of solid wood together with multi- dimensional bonding technology. | 1 | No | 3,59,700 ₹3.6 L | 3,59,700 ₹3.6 L |
| 8.00 | Supplying and Fixing of 4 Seater Dining Set in Honey Oak Finish which is made of up Bodden Sheesham Wood. Dimensions of Table : 43 inch width, 30 inch height , 43 inch depth, Dimensions of Chair : Height 30 inch x 19 inch wide x19inches detpth , Seating height 18 inch. The Rate includes of Materials, Transport and Delivery Charges. | 1 | No | 95,000 ₹95,000 | 92,398.9 ₹92,398.90 |
| 9.00 | Supplying and Fixing of Teak wood Wicker Chair of size 22 inches x 25 inches and 40 inches of height, additional depth - 18.5 inches & additional height -18 inches. Type of Material : Teakwood and Wicker , Colour : Natural , Style - Retro and Techniqu- Handcrafted with wicker. The Rate includes of Materials, Transport and Delivery Charges. | 1 | No | 70,000 ₹70,000 | 68,684 ₹68,684 |
| 10.00 | Supplying and fixing of Curved Arm Chair of size 55.90 cm x 58.40 cm x 78.70 cm with cushion seating of height 17 inches, type of material - Sheesham wood & cane, Finish- Honey Finish. The Rate includes of Materials, Transport and Delivery Charges | 8 | No | 15,000 ₹1.2 L | 14,880 ₹1.2 L |
Tender Value
Refer Docs
EMD Value
₹25,295
Closing Date
26 Feb 2026, 3:00 pmClosed
Executive Engineer
Executive Engineer Buildings C and M South Presidency Division Chepauk Chennai 5
Providing Work Stations Tables and Chairs to 5th floor of Coastal Aquaculture Authority Department in Animal Husbandry and Fisheries Building at Nandhanam Chennai 35
2026_PWD_662931_1
TNPWD/57-02/35M/2025-2026
Open Tender
Civil Works
90 days
Nandhanam chennai
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹25,295
20 May 2026
20 Feb 2026
26 Feb 2026
20 Feb 2026
26 Feb 2026
20 Feb 2026
Providing and placing "UPBEAT"desk based modular PENTA WORKSTATIONS - 1500 x 1500 workstation with System ht - 1200 mm.MAIN SCREEN: SANDWICH GLASS RETURN SCREEN: FABRIC MAGNETIC LEGS: Providing metal powder coated Cube leg. Legs are for standard workstation height of 750mm. UNDERSTRUCTURE: Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.WIRE MANAGEMENT: For 750 high workstations- For vertical wiremenagement, Shared legs / wire risers with cover are considere. For horizontal wiremanagement - Wire Tray with integrated power box. Access flap will be provided. Switch plate of (8+3 Anchor Roma) module is considered for Power and Data points.MODESTY :Metal modesty: Lazer cut perforated Metal modesty Metal modesty are mounted on the worktop with the help of the modesty mounting brackets Modesty terminates at 400 mm from ground. Pedestal - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray - Metal
Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. FIXED ARMRESTS: The assembly should be having Fixed arm rest structure moulded in glass-filled Poly-amide. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm .PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal .Overall Dimensions of ChairSeat Height - min 44.5 to max 53.8 cm.Height - min 99.5 to max 108.8 cm.Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm.
CHAIRMAN ROOM MAin DEsk (Main Desk+ERU+Mobile Pedestal) The Main table shall be of size 2795 Width mm x 1050 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in Smart Case - space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground with castors).The main desk is provided eith the wire management system also there is perfect storage side unit .
Supply of Arrive e Back unit of the size shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H.
CHAIRMAN ROOM CHAIR Posture Perfect High Back Standard Leather SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.*Seat SIZE: 45.5cm. (D) x 52.4cm. (W)BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner.*HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D)ARMRESTS: The armrest having four range of adjustment· Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly.· Up-Down adjustment has 8 position (10.5±0.5cm range)· Arm top swivel adjustment- 2 position, 12°±2° swivel inside· Arm top width adjustment - Any position (2.0±0.5cm range each arm top)· Arm top To - Fro Adjustment- any position (4.0±0.5cm range)· Armrest top is made up of high density PU molded over glass filled Poly-amide inner.POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features:· 360° revolving type.· Forward tilt of sesat and back.· Upright tilt lock.· Tilt tension adjustment can be operated in seating position.· 3-position Tilt limiter.SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm.
Supply of LA SEDE Visitor SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece.Overall Dimensions of Chair Seat Height -46.2 cm.Height -98.2 cm.Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm
Supplying and Fixing of L shape Director' Desk of Large of Size 2800 mm x 2330 mm x 770 mm height which is made of up engineered wood of Red - Cherry Colour , Knock Down Assembly type including material, transport and delivery Charges. The Engineered wood is made of binding or fixing the Strands,particles, fibres or veneers or boards of solid wood together with multi- dimensional bonding technology.
Supplying and Fixing of 4 Seater Dining Set in Honey Oak Finish which is made of up Bodden Sheesham Wood. Dimensions of Table : 43 inch width, 30 inch height , 43 inch depth, Dimensions of Chair : Height 30 inch x 19 inch wide x19inches detpth , Seating height 18 inch. The Rate includes of Materials, Transport and Delivery Charges.
Supplying and Fixing of Teak wood Wicker Chair of size 22 inches x 25 inches and 40 inches of height, additional depth - 18.5 inches & additional height -18 inches. Type of Material : Teakwood and Wicker , Colour : Natural , Style - Retro and Techniqu- Handcrafted with wicker. The Rate includes of Materials, Transport and Delivery Charges.
Supplying and fixing of Curved Arm Chair of size 55.90 cm x 58.40 cm x 78.70 cm with cushion seating of height 17 inches, type of material - Sheesham wood & cane, Finish- Honey Finish. The Rate includes of Materials, Transport and Delivery Charges
Supplying and Fixing of Mid Back Chair Model Divine The Chair are Glass filled Nylon base with sturdy mm GF Nylon Dual wheel castors and 120 mm Gaslift for hydraulic height adjustment, T Type adjustable PU armrest, back : ABS with Korean uphoistery Synchro Tilt Mechanism with inbuilt lumbar support, The Seat portion of the Chair PU Moulded cushion with good Quality approved fabric as directed by the departmental officers.
Supplying and Fixing of Computer table of size 1500 mm x 650 mm x 710 mm with marble finish on top with thickness of 18 mm with approved quality and brand as directed by the departmental officers.
Supplying and Fixing of Storage Unit of Size 850 mm x 450 mm x 2130 mm with marble finsih on top with thickness 18 mm with approved designs and compartments as directed by the departmental officers.
GST at 18%
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.14 MB
CONDITION2.pdf
Tender Documents • 0.47 MB
BOQ_795860.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid