SPL REPAIR OF SWT NO 1, 3 AND 7 IN RESTRICTED AREA AT JOD OF COD JABALPUR UNDER GE (EAST) JABALPUR

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement Concrete Type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.

Use and waste formwork to faces of walls, retaining walls, abutments, parapets & staircase railings & similar work including attached pillasters, buttresses, etc., vertical or to batter, fair finished flat surfaces of concrete. Complete all as specified and directed.

S&F of Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed.

M&L for Mild steel TMT bars 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clip etc complete all specified and directed.

M&L for moorum/ red bajri, spread, levelled and rammed including watering as required not exceeding 15 cm thick complete all specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6, mixed with water proofing compound and to be finished even and smooth (without using extra cement) complete all as specified and directed. Note: Water proofiing compound shall be measured and paid separately as supply only.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for RCC design mix M-30 (using 20 mm graded crushed stone aggregates) as in foundations, footing, plinth beams, bases for columns, mass concrete and the like etc for boundary wall complete all as specified & directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for RCC design mix M-30 (using 20 mm graded crushed stone aggregates) as in walls, parapets wall, basement wall at any thickness above the top of the footing including attached pilasters, buttresses etc. complete all as specified & directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F 150 mm wide Polyvinyl Chloride (PVC) water bar conforming to IS 3370 (Part -I) :2009 etc complete all as specified & directed.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil complete all as specified & directed.

Excavation in trenches not exceeding 1.5 m wide and not exc 1.5 m in depth in soft and loose soil complete all as specified and directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material not exc 50 meters and depositing where directed at a level not exc 1.5 m above the statring point complete all as specified and directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints of 150mm bore size including burning out joints and recovering lead complete all as specified and directed.

All as per srl item No 23 here-in-before but 100 mm dia bore.

All as per srl item No 23 here-in-before but 80 mm dia bore.

Taking down old unserviceable sluice valves, 80 mm (3”) bore complete all as specified and directed.

Taking down old unserviceable sluice valves, 100 mm (4”) bore complete all as specified and directed.

Taking down old unserviceable sluice valves, 150 mm (6”) bore complete all as specified and directed.

Supply and lay pipe ductile Iron , S/S including specials, Class “K-9” ,150 mm (6") bore complete all as specified and directed.

Supply and lay pipe ductile Iron , S/S including specials, Class “K-9” ,100 mm (4") bore complete all as specified and directed.

Supply and laying pipe GI Tubes, 'medium grade', pipes screwed socket jonts together with all tube fittings 80 mm bore in any length laid in trenches of size complete all as specified and directed.

Supply and fixing of sluice valve flanged end drilled type with steel spindle including nuts, bolts and jointing materials class PN-1.6 ISI marked of size 80 mm bore all as specified and directed by Engr-in-Charge.

All as per srl item No 32 here-in-before but 100 mm bore.

All as per srl item No 32 here-in-before but 150 mm bore.

M & L for Construction of valve chamber of internal size 1200 x 1200 x 1200 mm suitable for 100 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation, earth work etc, complete all as specified and as directed.

S&F spigot/flanged/ socketed CI fittings. such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc for up to 150 mm bore pipe complete all as specified and directed.

M&L cutting of road, hard standing made of concrete or premix carpet, suitable for soiling and morrum filling including excavation for laying of pipe upto 150 mm bore, all as directed and making repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded roadmetal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Schedule of credit amount of Rs 188719.00 to be deducted during AOC.