Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹16.2 L+₹40,082.80 (2.54%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹16.3 L+₹54,322.40 (3.44%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹16.6 L+₹84,113.26 (5.33%)Rejected-Finance | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹17.1 L+₹1.4 L (8.64%)Rejected-Finance LABU RAM STREET KOTKAPURA PB 151204 | KOTKAPURA | FARIDKOT | PUNJAB | 151204 | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹20.0 L
EMD Value
₹39,980
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(East) Ferozepur cantt
GE(East) Ferozepur cantt
CERTAIN REPAIR TO BLDG OF MD ACCN AT S AND T ZONE, R ZONE AND SAHEED SUKHDEV SINGH ENCLAVE UNDER AGE B/R-II OF GE (EAST) FEROZEPUR CANTT
2023_MES_594204_1
8114/GE/E/FZR/23-24
Open Tender
Civil Works
Item Rate
180 days
GE(East) Ferozepur cantt
Please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE(East) Ferozepur cantt
₹39,980
Yes
19 Jun 2023
9 May 2023
7 Jun 2023
9 May 2023
5 Jun 2023
23 May 2023
Amount
Racking out joints/ pointing to brick work or brick tiles, laid flat in floors,surface channels, roofs etc. work built in cement mortar complete all as specified and directed.
M&L flush pointing to brick laid flat or brick tiles in roofs and paving in cement mortar (1:3) complete all as specified and directed
Material & labour for Glazed ceramic coloured tiles in vertical surfaces 300X200X7mm /450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed
Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed
All as per Item No-05 here-in-before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed
Demolition of un-reinforced cement concrete in any position complete all as specified and directed
M&L for 75mm thick, Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone agg.as in floor finished complete all as specified and directed.
S&F Glass dividing strips, 3mm thick width of strip 38 mm complete all as specified and directed.
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) including demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as specified and directed.
All as per item 12 above here-in-before but using old bricks retrieved from dismantling including cleaning and removal of mortar from old bricks etc including demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed.
Supply only integral water proofing compound (ISI Marked) complete all as specified.
M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement including M& L for Preparation of new surfaces of wall and applying two coats of white lime wash (white washing) on walls including corneces, pillars etc complete all as specified and directed.
M&L for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including M&L preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed
M&L for use & waste wooden form work (rough finished surfaces ) to sides & soffits of Chajjas, parapets & facia and similar work n. exc 200 mm thick, complete all as specified and directed.
M&L for RCC type B1, 1:2:4 (20 mm graded Stone agg) as in Chajja, parapets & facia etc including demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for rendering 5 mm thick on RCC shelves and projections in cement mortar (1:3) finished fair and even, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.
Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directed complete all as specified.
Taking down, easing, adjusting & refixing in same opening wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each, complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or otherwise as directed complete all as specified.
Resecuring or easing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified & directed.
S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint ccomplete all as specified and directed.
S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20 mm graded stone agg .as in filling steel frames etc including necessary form work complete all as specified and directed.
Material and labour for PCC (1:2:4) type B1 with using 20 mm graded stone agg as in bed block hold fast block complete all as specified and directed.
S&F for 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and directed.
S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.
S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed.
S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed.
S&F for 300 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.
S&F in Repair 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed
S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F factory made double rebate box type side hung steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle with & without glazing bars, one side two shutters with glazing bars & other side glazed shutter with glazing bars including 6mm mild steel guard bars dovetailed or welded and with framed with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08. Note Wiremesh & glass will be measured separtely.
S&F factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified.
S&F 4.00 mm thick figured glass pin headed type, and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.
S&Fstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for preparation of steel & iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat primed surface complete all as specified and directed.
S&F framed work such as grills,gratings etc with end of bars shouldered and/ or riveted,or forged into spikes; framed guard bars;barred iron doors;ladders; framed balusters; walk ways;railings; frame work of water tanks and similar work con-forming to Fe-290.Gde-E-165 complete all as specified and directed.
S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups, powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed.
Dismantling timber in fillets, rails, posts, rafters, purlins, etc; under 40 sq. cm in each section, fixed in any position as in un framed work complete all as specified and directed.
S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed.
Dismantling boarding, any description,, fixed in any position with screws complete all as specified and directed.
S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed.
S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed.
S&F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed.
S&F Mild steel butt hinge, 75 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.
M & L for 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors concealed where necessary including taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.
S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors concealed where necessary including taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.
Fixing only including taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed.
Fixing only including taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, after cleaning old steel water tubing, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and directed.
S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.
S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F of pressure Jet for EWC incl PVC connection and CP fitting and all as specified and directed.
S&F in Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F in repair 15 mm bore Bip tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed.
S&F in repair 15 mm bore Bip tap cast copper alloy chomium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and directed.
S&F in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms). complete all as specified and directed.
S&F in repair stop cock/angle cock 15 mm cast copper alloy fency type cromium plate screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe (Min wt. 90 gms). complete all as specified and directed.
S&F in repair 20 mm Gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 15 mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Min wt. 90 gms) complete all as specified and directed.
S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) with shower arm 15mm size, 195mm long with bend of 45degreee with flange of PTMT any colour. (Minimum weight 40 gms) complete all as specified and directed.
S&F in repairs brass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.
S&F in repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed.
S&F in repairs 20 ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe(Min wt. 210 gms) complete all as specified and directed.
S&F in repairs 15 mm pillar taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Dismantling CI pipe alongwith fittings of 100/ 125mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and ccessories)
S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed.
S&F PVC (SWR), junction double, (double T), equal or unequal 110 mm complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. (fitting measured separately).
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead as in repairs complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed.
S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.
S&F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16" dia and 1" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50mm long complete all as specified and directed.
Kissan contractor and engg works
M/s Sarup Singh
B.L. Chaudhri and Co.
M/s Harkesh Kumar Bansal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .