Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.8 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹37.0 L+₹8.1 L (27.9%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
SPECIAL REPAIR TO POWER HOUSE, PROVISION OF PAVED WAY AROUND BOUNDARY WALL AT 762 SU, PROVISION OF STEEL LADDER OF WATCH TOWER AT AF STATION BORGARD AND IMPROVEMENT TO AREA P-408 AT AF STATION OJHAR
2024_MES_648136_1
8164/E8
Open Tender
Civil Works
Item Rate
240 days
GE AF OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹82,000
Yes
14 Jun 2024
28 Mar 2024
1 May 2024
29 Mar 2024
29 Apr 2024
11 Apr 2024
Amount
Taking down chowkats or frame, n.exc 1.5 sqm each with shutters (without taking off shutter from the frame) all as directed.
Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 sqm in each complete all as directed.
Taking down shutters of any descrption exc 1 sqm but n.exc 2 sqm each as directed.
Taking down shutters of any descrption n exc 1 sqm each as directed.
Dismantling structural steel work including doors,gates but excluding frame truss
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as directed.
M&L for demolition of concrete(unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.
M&L for demolition of concrete(unrreinforced) of any description in any position not otherwise specifically provided for and removing debris to location outside defence land complete all as directed.
Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.
Dismantling of stone slab and tiles of any description or thickness in floors or walls, aprons etc tiles laid, beded and pointed in any mortar complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed
M&L for demolition of concrete (reinforced) in any description and in any position not otherwise specifically provided complete all as directed.
M&L RCC Type B1, 1:11/2:3 using 20mm graded stone aggregate in for Shelves, Cooking plateform and similar work etc complete all as specified and as directed.
M&L for TMT bars 10mm dia. & over cut to lengths, bent to shape required hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia. All as specified and directed.
S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.
S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.
Supply and Fix solid PVC door frame of size 50mmx47mm made out of 10mm printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening including hold fast Complete all as specified and as directed.
S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing Complete all as specified and as directed.
Supply and fix MS framed work as in doors and gates of angle or other section with gusset plates, rails braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete all as specified and directed.
S&F in repair 25 mm dia stainless steel Drapery curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.
S & F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate and welding etc complete as specified and directed
S&F in repair mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.
S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as directed.
Supply and fix Stainless steel butt hinges, 100mm heavy weight and fixed all as directed.
S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised all as directed.
S & F 300 mm long aluminium alloy, anodised 16 mm dia sliding door bolt with haps , staple, bolt type and fixing clip of sheet, cast of extruded section and fixing bolt fixed all as directed.
S & F floor door stoppers of aluminium alloy body & tounge anodised with hard drawn steel spring overall length 140mm fixed complete all as directed.
Material and labour for Aluminum powder coated sliding window with aluminium powder coated three track frame of size 92mm x 32mm & 1.3 mm thick with 3 Nos sliding shutters of powder coated aluminum section (top rail bottom rail and style of size 40mm x 18mm & 1.1mm thick) screwed to walls/floor including provn of tinted sheet glass panels of 4mm thick fitted in pannels (2 Nos) and one shutter with aluminium wire cloth 0.36 mm nominal dia and width of aperture 1.40mm with and including necessary locking device, jointing cleats, glazing clips, rubber packing beading , aliminum bidding and screws etc. complete all as specified and as directed by Engineer-in-Charge..
M & L for Aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators and window choukat and shutter cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.
M&L framed work such as grills of any design, grating etc with end of bars shoulderd and/or riveted . Welded or forged into spikes. Framedguard bars iron doors . Ladders framed balusters , walk ways . Railings , frame work of of water tanks and ssimilar work conforming to fe410.
M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.
M & L for 75mm thick cement concrete (1:3:6) type C2 using 40 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.
M&L for coloured ceramic tiles 7 to 8mm thick (square/Ractangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm as in floors etc., laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 600x300x 7-8 mm/450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match laid with concept/patterns as per manufacturer catalogue over and including 10mm thick rendering in Cement Mortar 1:4 complete all as specified and directed.
M & L for 16-18 mm thick Granite any colour, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like jointed over and including 10mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified and directed.
M & L for Machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
S&F 1.25 mm Steel rolling shutters, with out ball bearing, as specified including top cover,anchoring rod,hasp and staple,one shop coat of primer,erected in position as indicated but gare operated type with bevel gear box and crank handle directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified and directed.
M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces fair and even complete all as specifed and directed.
M & L 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing surface all as specified and directed.
Supply and fix in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle , PVC Flush Pipe and brackets including taking down old cistern all as specified and as directed.
S&F in repairs Vitreous China wash basin (WHB), white, flat back, size 450x300mm excluding taps and plug but including Angle Iron brackets, 32 mm dia CP waste coupling, 32mm bore PVC Waste Pipe complete all as specified and directed.
S&F in repair Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.
Supply and fix 32mm dia low density polyethylene (LDPE) pipes of pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed.
Supply and fix 40mm dia low density polyethylene (LDPE) pipes pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed.
S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.
S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe including shower arm all as directed.
S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as directed.
S&F Stainless steel Peg set (Set of 06 each) fixed with chromium plated brass screws and wooden/plastic plug complete all as specified and as directed.
Dismantling CI Pipe of any dia and any description laid in floor and wall
S&F centrifugally cast (Spun) iron soil, waste and vent pipes 100mm bore, in any length including short pieces with or without ears, with cement joints, laid in trenches or in floors complete all as directed.
S&F centrifugally cast (Spun) iron soil, waste and vent pipes 100mm bore, in any length including short pieces with or without ears, with cement joints, fixed to wall complete all as directed.
S&F 100 mm cast iron branches pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as directed.
S&F 100 mm cast iron branches pieces, Double (equal or unequal) ordinary or inverted (apigot or socket type) or with parallel branches with oval access doors complete all as directed.
S&F 100mm bore CI bend (any radius) with duck foot or heel rest with oval access doors Complete all as directed.
S&F 100mm bore CI bend (any radius) diminishing pieces or tapers (larger bore measured with oval access doors Complete all as directed.
S&F 100 mm cast iron cowl complete all as directed.
S&F in repair salt glazed stone ware gully traps of size 180 x 100 mm, square or round mouthed type "P" complete all as directed.
S&F in repair 100mm dia cast iron Floor Trap, with grating including jointing to waste pipe fixed in cement concrete type b-1 (1:2:4) all as directed.
Taking down carefully existing bitumen tarfelt, including plaster or concrete bedding up to the RCC slab of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc and removing of the rubbish to a distance exc. 250 m but n.exc. 500 m and depositing where directed,complete all as specified and as directed.
M & L for providing cement concrete type B-O, 1:2:4 (12.5 mm greded aggregate) as in roof curve or mud stops, rounded of chamfered on edges complete all as specified and as directed.
M&L for 5 mm thick screed bed or bedding layer on RCC Roof top surface in cement mortar 1:3 mixed with Liquid water proofing admixture as per manufacturers instructiones finished the surfaces fair and even complete all as specified and directed . (Note :- WPA shall be measured and paid seperately)
M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as directed and given here in after (a) Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces prior laying APP. (b) Providing water proofing treatment with five layered membrane 3mm thick weighing not less than 3.5 kg/sqm APP modified bituminous membrane reinforced with non woven polyester mat of weight 160 gms/sqm as centre core applied by thermo fusion using LPG torch on the bottom portion of the membrane. (c) Applying Two coat of bituminous aluminium paint @100 gms per sqm over membrane
M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.
M&L for Preparation of old painted surfaces of wood and wood based of any description, not otherwise descreibed, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing new steel surfaces of any description width or girth exc 10 cm applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified and directed.
M&L for Preparation of old painted surfaces of steel and iron of any description, over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.
M &L complete removed existing treatment on old plastered surface of wall and applying 3 mm thick wall care putty in two layers to achive smooth finish complete all as directed.
M&L for preparation of old/new plastered surfaces finished with putty of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
Material and labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old Ceiling surfaces by brooming down and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.
Material and labour for preparation of newly plaster surfaces of wall and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old wall surfaces and applying two coats of white wash on walls including cornices etc complete all as specified and directed.
M&L preparing new plastered/Concrete surfaces of walls and applying two coats of acrylic smooth Exterior paint of required shade @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm complete as specified and directed.
M&L for Complete removal of existing treatment to walls and applying two coat of Exterior acrylic emulsion Weather coat Anti Fungal on walls in camouflage pattern as approved over one coat of Primer including provision of scaffolding , ladders, cradles etc required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed by Engineer in charge
Disconnecting existing water tanks of any description, of capacity exceeding 500 litre & not exceeding 1000 litre, setting aside for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc including writing of cleaning date on water tanks complete all as specified and as directed..
S&F Rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water storage tank of any description all as directed.
S&F 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE.
S&F in repairs 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE.
S&F in repairs 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm all as directed.
Supply and fix 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as directed
Supply and fix 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as directed. Note : Work shall be executed in triple storey building
M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed.
M&L for use and waste of form work to sides and soffits of chajjas for fair finished surfaces complete all as specified and as directed by Engr-in charge.
Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, edges rounded, laid over and including cement screed base 15mm thick in CM 1:6, complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment and as directed.
Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil.
M&L for 75 mm thick cement concrete type D2 (1:4:8) using 40 mm grade stone aggregate as in sub base of floor
M&L for machine pressed precast conctete interlocking paver block with grey cement and pigment any shape, size and colour confirming to IS 15658-2006 of 60 mm thickness, M-35 grade, make: Hindustan/ Universal all as specified and directed.
Supply and spreading sand under floor or infoundation including watering and consolidation
Removing surplus excavted material/ debries to distance of exc. 250 m but n.exc 500 m and deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 using 20 mm stone aggregated as in coping etc, including nesecesry form work complete all as specified and as directed.
Cutting holes into or through brick walls built in cement mortar or cement lime mortar area exc 150 sq cm but n exc 400 sqcm and making good in cement concrete 1:2:4 type B-1 complete all as specified and directed.
M&L for Rolled mild steel in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets etc confirming to Fe 410-W(Gde E-250) quality -A complete fixed to walls all as specified and directed
M&L rendering 15mm thick, plaster on fair faces of brick work or stone masonry or concrete surfaces in cm 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of primer complete as specified and directed.
M&L for preparing new steel surfaces of any description width or girth exc 10 cm applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified.
Material & Labour for PCC type B1 1:2:4 (Using 20 mm graded aggregate) as in bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises
Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level)
M& L Plain cement concrete 1:4:8 Type D2 ( using 40 mm graded stone aggregate) as in sub base 75mm thick all as specified.
M& L Plain cement concrete 1:2:4 Type B1 ( using 20 mm graded stone aggregate) as in sub base 25mm thick finished even and smooth without using extra cement.
M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.
M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in lintel bands and roof bands
M&L for Form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc.
S&F TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel steel wire (annealed ) not less than 0.90 mm dia or seccuring with clips quility confirming to Deformed or twisted bars.
ditto but 6 to 8 mm dia as in stirrups
M&L for brickwork using old size bricks Sub class B straight or curved on plan exc 6m mean radius built in CM 1:6
M&L for Rendering 10 mm thick cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth without using extra cement.
M&L for preparation of new plaster surface with two coat of OBD over a coat of primer complete all as specified and directed
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to math the shade of the slab including rubbing and polishing and including screed bed 15mm thick in CM 1:6 complete all as specified.
M&L for Granite (of any colour or any grains as approved) work with 20mm thick table rubbed and polished as in steps jambs , pillers , window cills, cooking platform and similar works including pointing in whice cement using 1:2 using marvel dust and admixture of pigments to match with the shede of grinate over and including 15mm thick screed bad in CM 1:6 for laying granite all as specified and directed including taking down / dismanteling of existing plaster/ stone of any type. Note : Granite shall be best quality and shall be provided one piece and width minimum 70mm in jambs except of cooking platform whicl shall be of full width as per site including full moulding of exposed edges with polishing. The back surface of grinate shll be made rough by sprinkeling small pebbles using adehesive for bonding with bedding layer.
Dismantling Asbestos cement (corrugated,semicorrugated etc) steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
S & F Steel work in tubular trusses,purlins,rafter,posts,gusset plates cleats wind tie etc including special shape washers etc complete using ERW or induction butt welded tubes conforming to IS 116-19/9 grade (medium grade).
S & F Steel rolling shutters with 1.25 mm thick lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle.
S & F Safety lever locks mild steel with 4 levers for rolling shutters
S & F Ball bearing for rolling shutters
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preperation of surfaces
BHUSHAN BHIMRAO PATIL
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .