Construction of Road Drain and Culvert for Shops in Sector C 4 at IA Trans Delhi Signature City Ghaziabad

Amount

Civil Works.

Dag -belling 15 cm deep in one line aligned with flag and jhandies as dierected by the Engineer in charge

Supply & Stacking of 45-90 mm gauge stone ballast for soling coat including cartage royality & all taxes

Supply and stacking of 40-63 mm gauge harde stone ballast from approved quarry for inter coat including royalilty, cartage octroi sales tax & all other taxes what so ever applicable under rules and required template after screening at road side, including dressing of side bems as required where metal is to be stacked

Supply and stacking of 22.40-53 mm gauge hardestone ballastfrom approved quarry forTop coat including royalty, cartage octroi sales tax & all other taxes what so ever applicable under rules and required template after screening at road side. Including dressing of side bems as required where metal is to be staked

Supply and stacking of approved quality and quarry, screening material for Stone ballast consolidation to the required size of stack after necessary dressing of site where materials are to be stacked including dressing of side bems as required where metal is to be Stacked Take 20 % itemNo. 2,3 & 4

Consolidation of hard stone ballast specified grade by road roller including hire and fuel charges of road roller including opening out stacks sorting ballast in to different size, spreading making medhi to retain water and also including carriage of metals & water and T & P etc. required for proper completion of the work water for consolidation to be arranged by the contractor himself at his own cost. (as per item no. 2+3+4) Rate as per SOR 2019 Item No. 755 (a)

Water allowance to allow on item No.2,3 & 4 for consolidation between 15th No. to 31st may.

Brick edging of both side of the road of M-150 bricks 7 cm wide and 11cm , deep laid with mud mortar including labour & supply of bricks finished to required template and in proper alognment and also including dressing & ramming the excavated earth as directed by the Engineer incharge.

Making level Pillars of 0.35 mm x 0.35m size and height upto 1.15 m as required by the engineer incharge in Ist class brick work in cement mortar in 1:6 including plaster at top and also including plaster at top and also including painting to demarcate the thicknessof each coat required for proper complettion of the work.

Providing & Laying Surface dressing (Ist coat painting) as wearing course in single coat using crushed stone aggregate of specified size on a layer of bituminous binder laid to on proposed surface and rolling with 8-10 tone smooth wheeled stell roler. Rate as per sanctioned estimate vide Job No. CD-III (106) Dt. 22.03.2021

Providing and applying Tack coat with bitumen on surface of grandeur base including cleaning of raod surface and spreading bitumen at the rate of 0.20 Kg/Sqm using mechanical means.

Providing and laying 50mm thick bituminous macadam with 100-120 TPH Hot Mix plant producing average output 75 tonne per Hour using curshed aggregate of specified grading preserved with bitumun binder @ 3.30 % by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade VG-30 level and alignment, rolling with smooth wheeled, vibrator and tandem roller to achive the desired compaction as per MORTH specifications clause 504 complete in all respect.

Providing and applying Tack coat with bitumen on surface of grandeur base including cleaning of raod surface and spreading bitumen at the rate of 0.20 Kg/Sqm using mechanical means.

Providing and lying 25 mm thick semi dence bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tone per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.5 to 5 percent of mix and filler, transprting the hot mix to work site, laying with hydrostatic power finisher with sensor control to the required grade, level and alignment, railing with smooth wheeled, vibratory and tandom rollers to achieve the desired compaction as per MORTH specifications clause 508 complete in all respects. Rate as per Analysis.

Construction of granular sub-base (GSB) by providing close graded material conforming to specifications,mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts,spreading in nuiform layers ofspecified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the charge. With materail conforming of Grade-II (size range 53 mm to 0.075 mm) having CBR value-25

Providing & Laying Factory made chamfered edge Cement Concrete Paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using place vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-charge. 80 mm thick C.C. paver bricks of M-30 grade with approved color design and pattern.

Cement concrete with 4 cm gauge stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all metarialss, labour T & P S.I. No-281 SOR-2019

M-150 class brick work in 1:4 cement and coarse sand also 2.20 F.M.mortar in foundation and plinth including cost of cement and also including cost of all other materials, labour T & P etc. required for proper completion of the work.

2.5 cm thick plain cement concrete floors with 1:2:4 cement approved coarse sand and 20 mm gauge graded approved stone grit laid in panels and finished with 3mm floatin coat of neat Cement and removing the overlaping mortar as the joints of panels and giving them a uniform finish including supply of all materials, labour, T& P etc. reuqired for proper completion of the work. S.I. No. 60 (A)

Flush pointing in 1:2 with cement and fine sand mortar including supply of all material, labour T & P etc. required for the proper completion of the work. S.I. No. 550

RCC work with cement approved coarse sand 2 cm guage approved stone grit in the proporation of 1:1.5:3 in slabs excluding coat of reanforcement and its bending but including necessary centering and shuttering etc. and also including coast of cement all other materials labour for proper completion of the work, binding wire cost of being including in the item

Mild tor steel or iron in plinth work such as reainforced concrete of reinforce brick work ( when not including in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastege and over laping and hook including supply of all materials, labour and T & P etc. required for proper completion of the work.

chetan associates

S R Contractor