SPL REPAIR OF PERIMETER FENCE 850 MTR AND CERTAIN REVENUE WORKS AT DINJAN MIL STN UNDER GE DINJAN

Amount

Dismantling fencing wire mesh,any type including Mild steel bars, flat iron , nuts & bolts etc complete all as specifeid and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground. Complete all as specified and directed.

M & L for Cement Concrete type C 2 1:3:6 using 40 MM graded stone aggregate as in foundation filling and mass concrete in fixing of fencing post including necessary form work if required at site complete all as specified and directed.

Material and labour rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening etc, quality-A and fixing complete all as specified and as directed.

S & F for Mild Steel fencing post/Hand rails, half round or other stock section including embeding in concrete and screwing etc. wind ties for roof including securing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work all as specifeid and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 5 cm but n.exc 10 cm long, dia of shank 5 to 10mm all as specifeid and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specifeid and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all specified and directed.

S&F mild steel MS round bar 10 mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed) complete all as specified & directed.

S& F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M & L for treating ends of posts, backs of chowkhats, etc., area tarred exc. 0.1 Sqm but n.exc 0.5 Sqm each complete all as specified and directed.

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer 10cm width of grith all as specifeid and directed.

Description all as per Ser item No.12 here-in-before but n.exc 10 cm width or girth all as specified and directed.

M&L 15 mm thick cement plaster on wall in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement, all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates Cover Slab (Manhole cover) and as in linted upto 1.5m clear span, cills steps sesmic and the similar bands plinth course, string (cours lacing courses, parapets coping kneelers, apox stone and the like incl weather etc including weathering slightly rounded or chamfered angles all as specified and directed.

Surface excavation n exc 30 cm and averaging 15 cm and getting out in soft/loose of soil, all as specifeid and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc or for shafts ,wells cesspits ,manholes ,pier holes etc n exc 10 sqm on plan and n exc in depth and getting out in soft/loose soil, all as specified and directed.

M&L for PCC 1:4:8 type D2 (Using 40mm stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L providing reinforced cement concrete type B1 (1:2:4) using 20 mm graeded stone aggregate as in foundation, including rafts,footings foundation beams, plinth beams, bases of columns etc, basement slab, underreamed piles and mass concrete all as specified and directed.

M&L providing reinforced cement concrete type B1 (1:2:4) ung 20 mm graeded stone aggregate as in columns, pillars piers, posts and struts all as specifeid and directed.

M&L providing reinforced cement concrete type B1 (1:2:4) using 20 mm graeded stone aggregate as in beam, cantilever, bressumers, lintel over 1.5 mtr span concrete flat all as specified & directed.

M&L for providing RCC Shelves, deck slabs, canopies etc using Type B 1 1:2:4 (20 mm graded stone aggregate) compleate all as specified and directed.

M&L TMT bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia with clamps compleate all as specified and directed.

Description all as per Ser item No.23 here-in-before but , 6 to 8 mm dia and over.

Description all as per Ser item No.23 here-in-before but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders.

Form work to sides of concrete foundations ,footings , bases of columns ,raft and raft beams , sides and soffits ( if any) of foundation and plinth beams and similar vertical or to a batter flat rough finished surface all as specifeid and directed.

Form work to sides of pillars, posts, struts, piers , columns and stantions rough finished surface square , rectangular or polygonal all as specifeid and directed.

Form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc fair finished surfaces of concrete flat all as specifeid and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 and rendering is to be finish even and smooth with out using extra cement all as specifeid and directed.

M&L for randering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish all as specifeid and directed.

M&L for preparation of newly plastered surfaces of walls & applying two coats of cement base paint over acoat of alkali-resistant priming paint complete all as specified and directed.

M & L two coats of oil bound distemper over a coat of primer & 1mm thick wall Putty on newly plastered wall surfaces including preparation of surfaces all as specifeid and directed.

S&F for steel work in tubular trusses including special shaped washers etc complete using ERW or induction but welded tubes all as specifeid and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet o.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified all as specifeid and directed.

S & F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame complete all as specified and directed.

M & L Preparing new ceiling and applying three coats of white wash complete as specified and as directed.

M&L for PCC 1:4:8 type D2 (Using 40mm stone aggregate) as sub base of floor 100mm thick finished even and fair all as specified and directed.

M&L hard core of gauge exc 63mm but not exc 100 mm depoted ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface broken stone or boulders all as specifeid and directed.

M & L for 25mm thick PCC 1:2:4, type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfaces rough to receive screed bed complete as specified and directed.

M&L for Kota Stone slab 18 - 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Kota stone slab 15 - 18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed incl 10 mm thick rendering in CM 1:3 complete all as specifeid and directed.

Providing PCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection 75 mm thick finishing cement concrete even amd smooth without ung extra cement all as specifeid and directed.

Forming 12mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'B' all as specifeid and directed.

Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point all as specifeid and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm, all as specifeid and directed.

M & L PCC typeC-1,1: 3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc all as specifeid and directed.

S & F pressed steel frames for door 105mm X 60mm with revates including necessary fittings lugs, hings, lock strike plate, etc complete as specifieds, supplied and fixed complete all as specifeid and directed.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match 35mm thick complete all as specified and directed.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match 25mm thick complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specifeid and directed.

Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fix 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work conforming to Fe410 all as specifeid and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specifeid and directed.

S&F 3mm thick sheet galss, ordinary quality and glazing with oil putty in n.exc 0.5Sqm each pane, all as specifeid and directed.

M & L for preparation of new wooden surfaces of any description over 10cm width or grith & applying two coats of synthetic enamel paint over a coat of pink primer complete as specified.

M & L for Mild Steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), all as specified and directed.

S&F vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F stop valve15mm bore cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete, all as specified and directed.

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

S&F tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges, all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement, all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends, all as specified and directed.

S&F rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltrs, all as specified and directed.

Supplying and laying 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified and directed.

Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified and directed.

Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm, all as specified & directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450X300X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over & including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over 20mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

S & F pillar taps cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed, all as specified and directed.

S&F 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer, all as specified and directed.

M&L for Soakage well size 1.8m dia x 3.00m effective depth excavation in any type of soil foundation in PCC 1:3:6 walls and honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size, all as specified & directed. (Drawing is available with AGE B/R-II Dinjan, Bidder can obtain the same during office hours)

M&L for rendering 15mm thick on fair faces of Brick work of concrete surface in cement mortar 1:4 finished fair & even completed all as specified and directed.

Supply only integral water proofing compound completed all as specified & directed.

M&L for concrete bed 1:4:8, type D 2 (using 40mm graded aggregate) to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in all as specified & directed.

Material and labour for 150 mm dia for salt glazed stoneware drain pipes of Grade "A" laid in trenches and jointed completed all as specified & directed.

M&L for cutting into existing manholes for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel(1/2 round and 3/4 secton) in cement concrete (1:2:4) type B-1 smooth finished and reforming bencing as required for 200mm dia complete all as specified to directed.

Dismantling of plain or corrugated steel sheeting any gauge any thickness incl nainital or similar pattern roof covering completed all as specified & directed.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Supply and fix 20 mm thick, second class hard wood boarding, planed one sides with butt joints and fixed complete in position as in eaves board, etc in repair complete all as specified and directed.

Material and labour for point wiring for One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of 1.2mm thickness with plastic laminated white top sheet cover 3mm thick all as specified and directed. (Note:- (1) Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate) all as specified & directed.

Description all as per Ser item No.92 here-in-before but One 3 Pin 5 Amps socket out let point on independent board, completed all as specified and directed.

S&F of Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified & directed.

Supply and fixing of switch socket combination 3/5 Pin, 2 in 1, 5 Amps, 240 volts flush type (non shuttered) complete all as specified & directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified & directed.

Supply and Fixing including testing commissioning of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size all complete all as specified & directed.

Supply and fixing LED flame proof light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all completed all as specified & directed.

S&F LED Bldg light fitting 35W 230 volts AC outdoor tye with high pressure die cst aluminium hostng and heat resistant complete with driver, lamp baacket with impact and corrosin resistant including thermal management in multiple optics including GI tubing for its installation all complete wth IP 65/66 protection completed all as specified & directed.

S&F Bldg light bracket fabricated out of GI Tubing light grade 32 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old corroded one all as specified and directed.

Supply and fixing in repair of MCB Distribution board SPN 8 Way for mounting SPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified & directed.

Supply and fixing SPN 32 AMPs rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified & directed.

Supply and fixing SP 6 To 32 AMPs rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified & directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.Note:No extra payment will be for the earthing GI wire of size 4 mm dia all complete as specified and as directed.

Supply and laying and testing cable, XLPE insulated,screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sq mm 2 core all as specified & directed.

Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, Taking Out and Laying of Cables, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed.

S&F Sub-Class B brick, well burnt, laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Boring under without disturbing the top surface of the road for passing through GI protection pipe 50mm bore, not exceeding 10m in single length complete all as specified and as directed. Note: Rate for Necessary machanry and assesories required for boring deemed to be included in the quoated rate by contractor.

M/S CHANDAN ENTERPRISE (BID ID -3432052)

Shree Trilok Electric Corporation (BID ID -3437865)

M/S Karen Enterprises (BID ID -3437839)

M/S A K ENTERPRISE (BID ID -3438201)

STANDARD ELECTRIC WINDERS (BID ID -3437970)