Establishment of in Vitro Pharmacology Laboratory in Department of Pharmaceutical Sciences in MDU, Rohtak (including E.I work).

Amount

Supplying and fixing glass panes including special metal sash putty of approved make glass panes 3mm thick, exceeding 40 sq dm areas

Providing and fixing aluminum work for doors, and windows ventilators and partition with extruded built up standard tubular / section /appropriate Z sections and other section of approved make conferring to IS, 733 and IS, 1285 fixed with rawlplugs and screws or with fixing clips or with expansion hold fasteners including filling up gaps at junction it top, bottom, and sides with required neoprene felt etc. aluminum screws shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle. Aluminum snap beading for glazing/ cancelling C.P brass / stainless steel screws, all complete. Fixed Portion: ( Anodised aluminum transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC15)

Providing and Fixing aluminium work for Doors, Windows Ventilators and Partitions with extruded built up standard Tubular Sections/Appropriate Z Sections and Other Sections of approved make conforming to I.S 733 and I.S 1285 fixed with Rawlplugs and Screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at Junctions, At Top Bottom and Sides with required neoprene felt etc aluminium sections shall be smooth, rust free straight miltred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for Glazing/Panelling C.P Brass/Stainless Stell Screws etc complete ( Make : Jindal / Hindalco) Shutters of Doors Windows and Ventilators including providing and fixing Hinges/Pivots and Making provision for fixing of fittings wherever required including the cost of PVC/Neoprene gasket required including aluminium fitting.

Providing and fixing 12 mm thick pre-laminated particle board flats pressed three layer or graded wood particle board confirming to IS,12823 grade 1 type II in panelling fixed in aluminium doors. Window shutters and partition frames with c.p brass / stainless steel screws etc. complete. Pre-laminated particle board with decorative lamination on both side

Providing and fixing glazing in aluminum door, windows, ventilator shutter and partitions etc. with PVC /neoprene gasket etc complete (cost of aluminum snap beading shall be paid in basic items) With float glass panes of 5.0mm thickness.

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smoothwith sand paper to fet an even and smooth finish including cost and carrigr of all material, labour charges, scaffolding, sundries etc. complete(J.K./Brila make)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on now work.

Providing and fixing false Ceiling without grooves with 12mm to 15mm thick,600mm X600mm best quailty mineral fiber tiles of approved make fixed on M.S steel runner frame i/c cost of screws angles, cleats, rawel,plags,with taping and painting etc. Complete in all respects as approved by the Engineer- in -Charge.

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. 3rd storey

Steel reinforcement TMT bars FE-500 EQR/FE-500D grade or more for RCC wrok, where no included in the complete rate or RCC including straightening, bending, binding, wastage,overlaps,welded joints,spacer bars,chairs,stays,hangers and annealed steel wire etc. and heights/depths/storeys/basements etc. Note. Reinforcement shall be measured in length indluding hooks, if any, separately for different diameters as accuslly used in work, excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work for walls (10cm to 20 cm thikness) straight and curved excluding steel reinforcement but including centring and shuttering, laid in position complete in all respect.

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint.

Providing and fixing anti skid tile 400 x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note : - Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS

Providing, Laying and fixing Granite Stone in all Shades 15 mm to 18 mm thick in flooring, Skirting, Dado etc laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with whicte cement slurry mixed with pigment to match the shade of granite stone complete in all respect to complete satisfaction of Engineer-in-charge.

Making of nosing to granite stone complete in all respect to complete satisfaction of Engineer-in-charge.

Public Health Cutting holes upto 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to exising finish where required. 11.43 cm thickness of walls

22.86 cm thickness of walls

Providing and fixing in position best indian make fire clay sinks with complete fittings as fully described in items no. 30.51 above. Size 600mm X 450 mm X 250mm

Providing and fixing in position 15 mm i/d C.P. brass bib cocks of best quality as required by the Engineer-in-Charge) Bib cock long body

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.i. pipe lines and making good the same to its original condition. size 75 mm x 75 mm

Providing and fixing G.I pipe 15 mm dia including fitting 'B' class Jindal make complete in all respect up to the entire satisfaction of Engineer-in- charge.

Providing and fixing 75 mm dia PVC pipe 4 kg presure Supreme/Kasta make complete to the entire satisfaction of the Engineer-in-charge.

Providing and fixing 75 mm dia PVC Elbow Supreme /Kasta make complete in all respect up to the entire satisfaction of Engineer-in-charge.

Providing and fixing 75 mm dia PVC flow trap Supreme /Kasta make complete to the entire satisfaction of the Engineer-in-charge.

E.I WORK Moulded case circuit breakers supply and erection of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connections. 100 amp to220 amp 415 V, 25 K.A 3 phase

Supply and erection of sheet steel enclosures 2 pole /3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc S.P.N. enclosure for single pole MCB 20 Amp.

Supply and erection of miniature circuit breaker / isolator 240 / 415 V in the existing distribution board including making necessary connections. (a) Miniature Circuit Breakers of 9 K.A. breaking capacity (ii) 6 amp to 32 amp SPMCB

Pipe laying Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required: Heavy gauge welded conduit pipe 20mm dia 1.60mm thickness surface

Heavy gauge welded conduit pipe 25mm dia 1.60mm thickness surface

Heavy gauge welded conduit pipe 20mm dia 1.60mm thickness flushed

Heavy gauge welded conduit pipe 25mm dia 1.60mm thickness flushed

Earthing with tinned copper earth plate 600mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. complete as required .

Extra for charcol or coke and salt for G.I plate for copper plate earth electrode.

Supply and erection of 20mmX3mm thick copper tape fixed with suitable copper stapples of same size.

Supply and erection of underground cable, loose in existing pipe or trenches complete with necessary connections: 70 Sqmm 3- 1/2 core cable armoured

Supply and erection of suitable compression type brass Cable glands for underground cable: 70 Sqmm to 95 Sqmm cable 3 to 3-1/2 core

Wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe. (i) Fan point a) Short point

b) Medium point

c ) long point

Light point a) Short point

b) Medium point

c ) long point

3 pin 5amp plug point including earthing the 3rd pin etc. Short point

Medium point

Long point

3-pin 15amp plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. Short point

Medium point

Long point

Wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe. (i) Fan point a) Short point

b) Medium point

c) Long point

Light point a) Short point

b) Medium point

c) Long point

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc. Fan point Short point

Medium point

Long Point

Light point Short Point

Medium point

Long Point

3-pin 5amp plug point including earthing the 3rd pin etc. Short point

Medium point

Long point

3-pin 15amp. Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. Short point

Medium point

Long point

Supply and erection of PVC unsheathed copper conductor cable single core 1100 voltas grade in pipe of suitable size excluding cost and erection of pipe cable size 1.5 sqmm (3/0.81mm)

Cable size 4 sqmm (7/0.85mm)

Supply and erection of MS saddles and clamps on wall/RCC parapit for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

Supply and erection of Socket size rotary step type Electtonic regulator for A.C. ceiling fan Anchor make Duluxe model No. 50440 ISI/SSK make PC 561 operated on 120/280 V.A.C. supply complete including cutting of existing bakelite sheet and making necessary connection etc. upto the entire satisfaction of the Engineer-in- Charge of the work.

Removel and re-erection of ceiling fan of any size from existing ceiling complete to the entrie satisfaction of the Engineer-in- Charge.

Dismantling of old wiring points complete to the entrie satisfaction of the Engineer-in- Charge.

Supply and erection of 36 watt LED false ceiling fitting 600mm X600mm make Bajaj,Philips, Havells complete to the entrie satisfaction of the Engineer-in- Charge.

Supply of MCCB enclosure SKB 5/6/7 and recess T.P Cat.No. ISEGTP Standard make equivalent make of Havells and Indoasian complete to the entrie satisfaction of the Engineer-in- Charge.

Supply and erection of power line vertical D.B's Standard make in double door for TP/FP MCCB SKB 5/6/7 or incomer W/O MCCB 8 way Cat.No. DSDPVDIBEO T008 equivalnant make of Havells and Indoasian complete to the entrie satisfaction of the Engineer-in- Charge.