Fabrication, Installation, testing commissioining of new gate along with allied works at Ranjit Pur minor of D-9 and Deoli D-13 of distributary of Ranbir Canal.

Fabrication, Installation, testing & commissioining of new gate along with allied works at Ranjit Pur minor of D-9

Dismantling of damaged rack and pinion winch machine of 05 ton capacity from the hoisting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block and tripod/hydra crane after removing accumulated mud/silt around the gate leaf. Extracting the damaged hoisting channel after breaking the concrete from its all the four ends. Fabrication of leaf structure at workshop of size 1.0X1.8Mtrs (approx) using the ISMC channel of 75X40MM size with 5 No. vertical & 4 No. horizontal cross members to make a complete frame for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 8mm thickness on the frame of channel structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps.Providing/fixing of bulb type/flat rubber seal of required size to match the leaf frame by providing & fitting of MS flat having holes for fixing the seal using requisite nuts and bolts.Fabrication of 05 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of 30X30cms size approx. and stem rod of appropriate size. Oiling and greasing the gear mechanism before fitting. Complete painting of gate structure by way of Providing two coats of superior quality enamel paint after applying two coats of red oxide primer. Loading the gate structure along with winch machine and 02 nos 5” hoisting channel of 2.25mtrs approximately on the mechanical transport for carrying to site of installation with the help of chain pulley block/crane. Unloading the gate structure and other allied material at site using crane/chain pulley block with the help of manual labour as per requirement. Grouting/anchoring of hoisting channel with appropriate PCC work at both the ends of hoisting channel by way of constructing the foundation block of 3’x2’x2’using 04 nos foundation bolts and securing plate at each end of appropriate size. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod/crane. Fitting of winch machine on the hoisting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure using required nuts and bolts. Complete job includes cost of material, including rebate on old material transportation charge, labour charges and testing for its smooth operation at Ranjitpur. Note: - The tenderers are requested to visit the site and any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Fabrication, Installation, testing & commissioining of new gate along with allied works at Ranjit Pur minor of Deoli D-13 of distributary of Ranbir Canal.

Dismantling of damaged screw jack type winch machine of 05 ton capacity from the hoisting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block and tripod/hydra crane. Extracting the damaged hoisting channel after breaking the concrete with the help of vibrator/chisel, hammer from its all the four ends. Fabrication of leaf structure at workshop of size 5’6”x3.0’ (approx.) using the heavy dutyangle of (50x50x6)mm size with 5 No. vertical & 4 No. horizontal cross members to make a complete frame for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 6mm thickness on the frame of channel structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of bulb type/flat rubber seal of required size to match the leaf frame by providing & fitting of MS flat having holes for fixing the seal using requisite nuts and bolts. Fabrication of 05 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of 30X30cms size approx. and stem rod of appropriate size. Oiling and greasing the gear mechanism before fitting. Complete painting of gate structure by way of Providing two coats of superior quality enamel paint after applying two coats of red oxide primer. Loading the gate structure along with winch machine and 02 nos 5” hoisting channel of 7.0’ approximately on the mechanical transport for carrying to site of installation with the help of chain pulley block/crane. Unloading the gate structure and other allied material at site using crane/chain pulley block with the help of manual labour as per requirement. Grouting/anchoring of hoisting channel with appropriate PCC work at both the ends of each hoisting channels Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod/crane. Fitting of winch machine on the hoisting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure using required nuts and bolts. Complete job includes cost of material, including rebate on old material transportation charge, labour charges and testing for its smooth operation at Deoli. Complete job. Note: The tenderers are requested to visit the site and any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions

M/S K S ENGG WORKS

G S ENGINEERING WORKS

M/S UK MECH AND ELECT ENGG WORKS

M/S K S ENGG WORKS