CERTAIN REPAIR TO STORM WATER DRAINS, PATHWAY OF AREA UNDER GE (SOUTH) AT PATIALA MIL STN

Amount

Demolition of Brick work including all quoains and arches, pillars etc built in cement mortar complete all as specified and directed.

M&L Brick work using sub class B old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M&LBrick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in drains including nescessary filling & jointing and pointed flush with same cement mortar as wrk proceeds on other side of drain complete all as specified and directed.

M&LBrick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in drains(Except bricks) including nescessary filling, jointing and pointed flush with same cement mortar as wrk proceeds on other side of drain Complete all as specified and directed.

M&L Flush pointing to brick work as in drains etc., in cement mortar (1:4) complete all as specified.

M&LCement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, kerbs, bed plates etc., with slightly rounded or chamferred angles & throating complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&LRendering 15mm thick cement plaster in cement mortar 1:4 on brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L for preparing new or previously untreated plastered surfaces and applying two coats of cement base paint on new plastered surfaces of walls etc. complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in surface channels & drain complete all as specified and directed.

M&L Extra for forming fair finish to drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds/mitred stopped ends etc. complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm stone aggregate as in foundaton ,fillings and mass concrete or sub base under floors complete all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in foothpath ,parks,lawns,drive ways,or light trafic parking etc,shape made by table vibratory method using PU mould ,laid in req. colour &pattern over and incl. 50mm thick compacted bd of fine sand,compacting and proper embedding/laying of interlocking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with sand &cutting of paver blocks as per req. size and pattern ,finishing and sweeping extra sand complete all as specified and directed.

Excavating in post holes (or similar holes) in soft / loose soil each not exc 0.5 cu. m, getting out, removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed.

Demolition posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion (posts embedded in natural ground or hard core) and making good disturbed ground complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed

M&L for mild steel work as in posts and struts in fencing and ladder/ stair including cutting tops to shape as directed, drilling holes, notching for wire, etc.; incl flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work erected and fixed in position or embedding in PCC complete conforming to Fe-290 Gde E-165 all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Chainlink fencing 3 mm dia galvanised steel wire 100X100 mm mesh made up into mattresses or cages, lapped wired and laid in postion including closing after filling fixed in repairs complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, 5 to 10mm diameter of neck, not exceeding 5cm long complete all as specified and as directed.

S&F for MS round bars 10mm dia line wire for fixing of chain link fencing, cut to length, bent to shape required, including cranking, bending and binding, complete all as specified and as directed.`

M/S Mukesh Kumar Gupta

ANIL KUMAR AND CO

m/s panchmukhi builders

NORTON BUILDER

AR CONSTRUCTIONS

rkkataria and sons