PROVN OF RCC OVERHEAD TANK OF CAPACITY 25000 GALLONS AND ASSOCIATED WORK SERVICES AT AF STN BAGDOGRA UNDER GE (AF) BAGDOGRA

Amount

SCHEDULE 'A' PART- I (BUILDING WORKS) Note:- This Schedule is not pre-priced by MES and the pre- priced rate indicated as "Rs. 0.00" under Col- 5 signifies this fact only.

Construction of RCC Over Head Tank of capacity 25000 gallons circular type on 18m staging from GL to bottom of floor ring beam complete all as specified and as shown on drawings.

Construction of pump house- cum- filteration plant building complete all as specified and as shown on drawings.

SCHEDULE "A" PART-II (SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-VI (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-VIII (FENCING AND GATE) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-IX (RETAINING/PROTECTIVE WALL) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART- X (IRON REMOVAL PLANT) Note:- This Schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.

Supply, installation, commissioning and testing of catalytic type iron removal plant of capacity 10000 GPH complete, suitable for raw water having iron content 4mg per litre to bring it to less than 0.30 mg per litre, acceptable standard of potable water and testing chemical analysis of treated water from National Test House, Kolkata including Painting works, PCC foundation, necessary fittings, fixture control valves and required flanged pipe etc complete all as specified and directed by Engineer- in- Charge. The plant shall comprise of the following accessories :- (a) Air compressor of capacity 3 HP for backwash facility including electrical connection. (b) Altoch dosing sytem of capacity 25 ltr/hr including electrical and water supply connection. (c) Venturimeter of suitable size. Make : RMCO/ZEOLIT /AQUA/IONEXCHANGE/PETERSON

SCHEDULE "A" PART- XI (MISCLLANEOUS ITEMS TO BE QUOTED BY BIDDERS) Note:- This Schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.

INTERNAL ELECTRIFICATION S & F Energy efficient retro LED T8 luminaire, 20W, 4 ft long complete extruded aluminium body and PC diffuser complete with inbuilt driver, 1100V grade complete all as specified and directed. Make: Crompton Cat Part No. LTT8-20 or equivalent model of other approved makes.

S&F Mirrorlite decorative box type batten, 4 ft long, blue colours end caps, prewired for LED batten complete all as specified and directed. Make: Crompton Cat Part No. DMLN1LT8-16 or equivalent Model of other approved Makes.

S&F of LED 12 Watt surface mounted fitting, energy efficient, decorative type suitable for Armstrong/ grid ceiling, with its super bright LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. complete all as specified and directed. Make: Bajaj Cat Part No. BGCML12 01 WH or equivalent model of other approved Makes.

S&F distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240 volts, 200 Amp rated bus bar with front openable cover suitable for SPN 4 way complete all as specified and directed. Make: Hager CP No VYS04D or equivalent model of other approved makes.

S&F MCB DP/ SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA complete all as specified and directed.

S&F MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA complete all as specified and directed.

S&F LED street light fitting 18 watt complete withpowder coated die cast aluminium compact IP 65 protection complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make: Crompton LSTP-18-CDL or equivalent model of other approved makes. Not:-Adequate size of bracket/ clamps, nuts, bolts, washers etc required at site are deemed to be included in the quoted rate.

Shifting of existing outdoor panel not more than 5 meter and reconnection with existing system all as specified and directed.

S&F exhaust fan 300mm sweep, heavy duty, 1400 RPM, AC, 230 volts with louver complete all as specified and directed. Make Havells, model No. Turbo force or equivalent model of other approved makes.

FENCING AND GATE S&F concertina coil (reinforced punched barbed tape single layer) fixed to fencing posts complete all as specified and as directed by the Engineer-in-Charge comprising the following technical specification :- (i) Diameter of concertina coil : 600mm dia, will be stretched to 6 metre length (ii) Number of turns in concertina : 52 turns (iii) Strip : 0.5 mm + 0.05 mm thick cold rolled low carbon electro galvanised steel tape, width 19 mm (before wrapping on central core wire), zinc coating : 120 gm/Sqm (iv) Central Core Wire : Hot dip galvanised tensile spring steel wire (IS-2629-1966), gauge/thickness - 12 SWG (2.60mm) : Conforming to IS-4454 (Part-I, grade II), Zinc Coating 250 - 300 gm/Sqm (v) Galvanising punched steel tape : 10-16 microns (vi) Number of barbs per metre : 38 to 39 Nos (vii) High tensile spring steel wire (HTSS wire) : Coated with anti corrosive and rust resistant bitumen paint (viii) Clips : Galvanised, type U/C (ix) Coverage per coil -6 RM (x) Handle and Spikes as required. Note : Each row of coil shall be measured as one unit length.

S&F of GI chain link fencing of mesh size 100mm x 100mm and dia of wire each way 4mm including all connecting accessories complete all as specified and directed.

EXTERNAL WATER SUPPLY Boring road for lying of pipe not exceeding 90 cm below ground level complete all as specified and directed.

Material and labour for construction of valves pit chamber of size (1200 mm x 1200 mm x 1200 mm, Internal), 150mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in foundation, full brick thick wall in CM (1:4), 10 mm thick rendering all around the brick work with cement mortar (1:4), PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in coping for grouting MS frame including 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame work 40 x 40 x 6 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs complete all as as specified and directed.

S&F of flange made out of PP-R with ring, nuts, bolts and rubber gasket complete of size 110mm bore all as specified and directed.

Cutting of existing PP-R pipes of 160mm dia and insertion of PP-R Tee with nuts, bolts and rubber gasket complete of size 160 x 160 x 110mm bore complete all as specified and directed.

S&F of cast iron sluice valve 100mm conforming to IS- 14846, PN 1.6 clockwise dosing with flanged ends and iron wheel including necessary joints by means of bolts, nuts, washers and rubber gaskets complete all as specified and directed.

Sanjay Construction Company