Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-Finance PROP NO A 80 FIRST FLOOR FLAT NO 3 CHATTAR PUR ENCLAVE PHASE 2 NEW DELHI SOUTH WEST DELHI DELHI 110074 | SOUTH DELHI | DELHI | 110074 | L1 | Accepted-Finance ok | |
| 2 | L2₹2.2 L+₹4,194.40 (1.94%)Accepted-Finance | L2 | Accepted-Finance ok |
Tender Value
Refer Docs
EMD Value
₹4,400
Closing Date
7 Apr 2020, 11:00 amClosed
EEEnMHPI
DELHI JAL BOARD GOVT OF NCT OF DELHI OFFICE OF THE EXECUTIVE ENGINEER EnM HP I HAIDERPUR WATER WORKS DELHI 110085
Repairing of 02 Nos valves of 600 mm dia of upadhaya make installed at filter house of Bawana WTP
2020_DJB_190134_4
NIT 32
Open Tender
Miscellaneous Works
Works
90 days
haiderpur water works
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Delhi Jal Board
₹4,400
13 Apr 2020
31 Mar 2020
7 Apr 2020
31 Mar 2020
7 Apr 2020
31 Mar 2020
Part A:- Repairing/Servicing of upadhaya make Inlet sluice valves of size 600 mm dia of filter bed no 06 at filter house of Bawana WTP. Removing of gear box from the sluice valve body, along with gland housing and gland plate bolts.
Cutting of nut bolts of Inlet valve C.I. bent of size 600 mm dia & removing of bend from its position with lifting arrangement and put it on the safer place in the water channel.
Closing of incoming water in the filter bed from the outer water channel by providing & fixing of temporary M.S plate & sand bags to stop the water & make working condition on the Sluice Valve.
Making of special type lifting arrangement for lifting of bonnet with chain block & with the help of heavy duty manual labour arrangement and put it on safer piece in the water channel.
Taking out complete wedge from the Sluice Valve body by lifting with the help of Tripod chain block arrangement. Cleaning of body seat rings of Sluice Valve from inside by chemical solution and polishing by manual arrangement. Cleaning of Sluice valve wedge facing rings by chemical solution, emery paper etc. and Polishing as required.
Supply of Eye Bolts.
Supply of Gasket (Rubber IS :638 Type:- B)
Supply of Nut Bolts.
Supply of gland packing.
Cleaning and repairing of SS spindle threads as required by the job
Cleaning and repairing of GM nut threads by matching with SS spindle threads for smooth movement of spindle on load.
Fixing of complete wedge in Sluice valve body with proper matching of both the seat rings of body & wedge rings, fixing of wedge nut along with stem, fixing of bonnet after replacing of gasket & damaged nut bolts/studs with the help of lifting arrangement etc & tightening of nut bolts with spanner, fixing of Gland packing and Gland Plate etc. with the help of manual labour arrangement etc. as required by job.
Re-fixing of C,I Bend with rubber packing & nut bolts with the help of lifting arrangement etc. to fix with inlet sluice valve as per site requirement.
Overhauling of complete gear box of the sluice valve including cleaning, greasing and fixing the same on the sluice valve and taking trial run of sluice valve as required by deptt.
Removing of sand bags & temporary M.S plate from the outer water channel to start incoming water from the inlet Sluice valve.
Part B:- Repairing/Servicing of Upadhaya make outlet sluice valves of size 600 mm dia of filter bed no 07 filter house of Bawana WTP.Removing of gear box, handle with extended spindle from the sluice valve. along with gland housing and gland plate bolts.
Making of special type lifting arrangement for lifting of bonnet with chain block & with the help of heavy duty manual labour arrangement and put it on safer place in the water channel.
Taking out complete wedge from the Sluice Valve body by lifting with the help of Tripod chain block arrangement. Cleaning of body seat rings of Sluice Valve from inside by chemical solution and polishing by manual arrangement. Cleaning of Sluice Valve wedge facing rings by chemical solution, emery paper etc. and polishing as required.
Supply of Eye Bolts.
Supply of Gasket (Rubber IS :638 Type:- B)
Supply of Nut Bolts.
Supply of gland packing.
Cleaning and repairing of SS spindle threads as required by the job
Cleaning and repairing of GM nut threads by matching with SS spindle threads for smooth movement of spindle on load.
Fixing of complete wedge in Sluice valve body with proper matching of both the seat rings of body & wedge rings, fixing of wedge nut along with stem, fixing of bonnet after replacing of gasket & damaged nut bolts/studs with the help of lifting arrangement etc & tightening of nut bolts with spanner, fixing of Gland packing and Gland Plate etc. with the help of manual labour arrangement etc. as required by job.
Overhauling of complete gear box of the sluice valve including cleaning, greasing and fixing the same on the sluice valve and taking trial run of sluice valve as required by deptt.
Removing of sand bags & temporary M.S plate from the outer water channel to start incoming water from the inlet Sluice valve.
samanvya infrastructure private limited
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .