PERIODICAL SERVICES AND MISC B/R REPAIR TO JADUNATH VIHAR MD ACCN IN ZONE-I UNDER AGE B/R OF GE JAIPUR

Amount

M&L for sand paper gentle rubbing to obtain smooth surfaces ,repair with putty and applying one coat of oil bound distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller /brush including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal through sand paper gentle rubbing to obtain smooth surfaces ,repair with putty and applying two coat of oil bound distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller/brush on Wall Surface including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

M&L for sand paper gentle rubbing to obtain smooth surfaces ,repair with putty and applying Two coats of oil bound distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller/brush over one coat of water based white pigmented akali resistant priming paint on Ceiling Surface including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

M&L for 1 mm thick wall care putty on wall complete all as specified and as directed by Engineer -in-Charge

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying one coat of white wash all as specified and directed

All as per item No 5 above but two coats of white wash on wall

M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on ceiling

All as per item No 6 above but two coats of white wash on ceiling.

M&L complete removal of exising treatment and thoroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of Cement Base Paint using hand roller/ brush of over one coat of water based white pigmented akali resistant priming paint for external wall upto ht. of G+3, complete all as specified and as directed by Engineer-in-Charge.

M&L for thoroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying one coats of Cement Base Paint using hand roller of over & including one coat of water based white pigmented akali resistant priming paint for external wall upto ht. of G+3 , complete all as specified and as directed by Engineer-in-Charge.

M&L for one coat painting with synthetic enamel paint on old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed

M&L for one coat painting with synthetic enamel paint on old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface upto ht. of G+3 including all preparatory work complete all as specified

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed

M&L brick work with sub class 'B' Bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M & L Brick work with sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed

M & L providing cement concrete 1:2:4 type B-1 (20 mm graded aggregates) as in coping over wall necessary including formwork complete all as specified and as directed

M & L stone walling of squared rubble uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge held against the dressed surface n. exc 40mm for Sand stone and dressing of face beds and joints, as specified of squared rubble uncoursed complete all as specified and as directed

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints, hacking for key, scrubbing with water etc, complete all as specified and as directed

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 on external surface finished even and smooth without using extra cement complete all as specified and as directed

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth on wall suface upto ht. G+3 without using extra cement incl all necessary arrangment complete all as specified and as directed

M & L rendering 10mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement complete all as specified and as directed

M & L rendering 10mm thick on dubbing out surfaces on ceiling in CM (1:3) as floating/ setting coat in patches not exc 3 sqm each patch complete all as specified and as directed

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint over primer upto G+3 incl necessary arrangment complete all as specified and as directed

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint complete all as specified and as directed

M & L for making good the edges of chajja/ facias in proper shape with rich cement mortar 1:2 / PCC 1:2:4 type B-1 including matching the surface with existing treatment complete all as directed

M&L plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar complete all as specified and as directed

M & L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in coving at juction of chajja/slab and wall/ lintel/ beam finished even and smooth in any situation and position including form work complete complete all as specified and as directed

M&L 18-20 mm thick Udaipur Green marble (table rubbed & polished) in cooking plat forms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed

Rounding to edges of stone slabs one edges such as in cooking platform, shelves and other similar situations complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and as directed

S & F 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and as directed

S & F 4mm thick figured glass pin head type and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and as directed

S&F MS bracket for curtain rod 25mm dia complete all as specified & directed.

S & F in repair drapery rod Mild Steel 25 mm dia of decorative pattern and colour complete all as specified and as directed

S & F in repair swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, (minimum weight 40 gms) complete all as specified and as directed

Dismantling old unserviceable RCC / PVC water tank & removal from site complete all as directed capacity exceeding 250 ltr and not exc 500 ltrs complete all as specified and as directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, Make - Sintex or eqivalent

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic bal serewed for iron pipe 20 mm dia and fixed (min weight 210 gms) complete all as specified and as directed

S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed

S & F in repair PVC valveless, syphonic action type flushing cistern 10 lirs capacity, low level, white with inlet, ball valve, float and handle incl brackets & flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern, complete all as specified and as directed

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and as directed

S & F in repair vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) complete incl connection to trap & flushing pipe antisyphonage pipe etc complete all as specified and as directed

S&F in repair vitreous china wash hand basin flat back basin including half pedastal, coloured, size of 550 x 400mm including CP waste coupling but excluding taps, waste chan & plug complete all as specified

S&F fancy type pillar cock 15mm bore cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts all as specified

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, Make - Nirali, Neelkanth or equivalent

Disconnecting existing tank of capacity exc 250 and not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc complete all as specified and as directed

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed

S & F in repair cast iron floor trap 75mm dia outlet with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed

S&F in repairs PVC waste pipe flexible 32mm dia min 750mm length for WHB complete all as specified and as directed

S & F in repair hasp and staple of size 100mm mild steel safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F in repair of broken projecting type/ box type hinges of steel window/ ventilators with and including new hinges fixed by welding incl matching with existing surface and easing the window for opening and closing complete all as specified and as directed

Demolition of PCC in ground floor and paving n exc 15 CM thickness(below or above ground level) complete all as specified and as directed

Supply & fix in repair stainless steel kitchen plate rack of overall minimum size 750 x 600 x 225mm & Min weight not less than 5kg with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality complete all as specified and as directed

S&F in repair of CP cast copper alloy bib taps long body with wall flange fancy type of 15mm bore half turn complete all as specified

S&F in repair PVC water storage tank cover for capacity exc 250 ltr but not exc 500 ltr including driling &fixing nut and bolts all as specified

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm without taking off shutters from frame

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and as directed

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 sqm each without taking off shutters from the frame complete all as specified and as directed

Taking down door shutter of any description area exc. 1.5 sqm but n exc. 2 sqm each leaf and resecuring or easying and refixing in same opening complete all as specified and as directed

S&F Pressed steel frames size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl back filling cement concrete type 1:2:4 type Bo complete, all as specified and directed

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003 complete all as specified and as directed

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing. Make - Rajshri, Sintex

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary.

S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete

S & F 125mm long aluminium handles, cast type anodised complete

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete

S & F 125mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed

S & F aluminium door stopper 75mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified and as directed

Supply only 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and as directed

S & F stainless steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F in repair stainless steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

M & L Preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and as directed

M&L Two coats of synthetic enamel paint to steel surfaces over & including red oxide primer exc 10 CM in width or girth including preparation of steel surfaces complete all as specified and as directed

M&L for welding in repairs to mild steel hinges in steel door frame.(Mild steel hinges are included in quoted rate) complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and as directed

M & L coloured non skid ceramic joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L coloured glazed joint free ceramic tiles 450x300x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

Less Schedule of Credit

DILIP KUMAR JHANGINIA (BID ID -3105593)

J.J.ENGINEERING (BID ID -3112688)