Replacement of old and damaged switch boards and switches, AC wirings by new ones and shifting, reorientation and repairing of light and fans with allied works for the rented out portion of RTTC building, Bhubaneswar.

Amount

Replacement of the faulty /damaged wires /wirings by the following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/PVC casing & capping etc. as required.

1 x 1.5 sq. mm

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

2 x 4 sq. mm

3 x 4 sq. mm

4 x 4 sq. mm

2X2.5+1X2.5sq.mm

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supply of the following sizes PVC insulated & PVC sheathed copper conductor multicore un armoured cable including fixing/laying on wall with C-clamps/in existing conduits/on cable trays with cable ties etc. as required.

3 coreX2.5sqmm

4 coreX2.5sqmm

3 coreX4.0 sqmm

Replacement of damaged conduits by the following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

100 mm X 100 mm X 60 mm deep

150 mm X 75 mm X 60 mm deep

180 mm X100 mm X 60 mm deep

200 mm X 150 mm X 60 mm deep

200 mm X 150 mm X 75 mm deep

200 mm X 250 mm X 60 mm deep

200 mm X 250 mm X 75 mm deep

200 mm X 300 mm X 60 mm deep

250 mm X 300 mm X 60 mm deep

Replacement of damaged switch board covers by new phenolic laminated sheet covers of 3mm thick (ISI) of different sizes as per the site requirements i/c cutting for fixing switches, sockets and fan regulators etc, and fixing on the existing MS/GI switch boards/junction boxes/power plugs with suitable size nickel cadmium counter sunk screws and washers etc. complete as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Replacement of modular type switch boards by following size/ modules, GI box (at least 1.2mm thick) along with modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75 mmX75 mm)

3 Module (100 mmX75 mm)

6 Module (200 mmX75 mm)

8 Module (125 mmX125 mm)

12 Module (200 mmX150 mm)

Replacement of faulty switches and sockets by following modular switch/ socket on the existing modular plate/switch box including connections but excluding modular plate etc. as required.

10 A One way Modular switch (ISI)

16/20A Modular switch (ISI)

6 A Modular socket (ISI)

6/16A Modular twin socket (ISI)

Replacement of the faulty Isolators and MCBs by new ones of following ratings ISI marked as per IEC 60947-3 /MCBs 10 kA , C- Curve as per IEC 60947-2 in existing MCBDBs i/c connection testing etc. as required.(Make-Legrand / L&T / Schneider Electric / Siemens/Havells

6-32A SPMCB

40-63Amps DP MCB

63Amps 4 pole MCB

40Amps DP Isolator

63Amps 4 pole Isolator

Blanker plates for MCBDBs

Supply and fixing of computer power supply boards in surface/recessed, consisting of 4nos modular type 6/16Amps modular twin shuttered socket (ISI) and 4nos 10 amps modular switch (ISI) with modular GI box, modular plate and front facia i/c interconnections with suitable size PVC insulated copper conductor cable etc. as required.

Supply and Fixing of MCB protected Socket outlet 4 modules with metal box comprising of 01no. 25Amps socket and 01no. 25Amps Plug and 01no. 25Amps "C" series SPMCB for Split AC units’ i/c grouting in wall, connection, testing etc. as required. (Make: Legrand/ L&T / Schneider Electric/ Siemens / ABB)

Supply and fixing of following sizes heavy duty PVC casing and capping (ISI) along with accessories for drawing wires etc. as required.

20mmX12mm

25mmX12mm

32mmX12mm

38mmX20mm

Replacement of the defective Capacitors / Fan regulators/ bearings for ceiling fans etc. by the new one of following ratings etc. as required. (Make- Anchor/Havells/Cona/ISI)

Stepped type Electronic Fan Regulator (Switch type)

2.25 mfd 440 volts Capacitor for Ceiling Fan

Bearings for Ceiling fans (6201 & 6202) etc. as required. (Make: SKF/SS)

Ceiling Fan clamps heavy duty mild steel zinc golden colour with rubber (Shackle set)

Ceiling Fan hook heavy duty mild steel with fasteners i/c drilling holes on concrete ceiling and fixing firmly to withstand the static and dynamic loads of the ceiling fans

Supply and fixing of the followings i/c drilling, fixing with suitable size screws, connection etc. as required.

Ceiling Rose 230V 50Hz.

Ball and Sockets for down rods-20mm

PVC /Polycarbonate gang box (3"X3")

Supply of the following electrical accessories/components for Electrical Light Fittings i/c testing etc. as required.

36 /40-watt Fluorescent Tube rods

36/40-watt electronic ballast for Fl. Tube fittings

Shifting of lighting fixtures / ceiling fans from existing positions to the required positions as per the room layouts including removing the down rods and refixing at desired locations etc. complete as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP-C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Legrand /Havells/Anchor/Schneider)

Supply and fixing of wall mounting / ceiling suspended mounting rail/batten fitting for TLED lamps suitable for single/double 20/22watt LED Tube light with integral LED driver i/c connection etc. as required. (Make-Phillips model TMC 501/equivalent model of Havells/Bajaj/Crompton)

For Single Tube rod (Model- Phillips-TMC 501 P 1xT-LED 22W P3241)

For Double Tube rods (Model-Phillips TMC 501 P 2xT-LED 22W P3242)

20W 4ft ultra bright LED Tube light with very high efficacy 2100Lumen, 6500K & THD<15%, single side wiring suitable for installation in existing FLT fixtures having G13 lamp holders i/c connection etc. as required. (Make-Phillips/Equivalent of Bajaj/Wipro/Crompton)

Supply and fixing of 21W, 5000-6500K, 2000 Lumen Aluminium body compact general purpose, IP-20, cool white T5 smart bright Batten suitable for operation on 230V 50HZ AC supply i/c connection etc. as required. (Make-Phillips BN021 /Equivalent of Bajaj/Wipro/Crompton)

Supply and fixing of 380mm /15" heavy duty 900 RPM Exhaust Fans having maximum free air delivering capacity with a capacitor start and run type, continuously rated, totally enclosed and ruggedly built motor having pre-lubricated double ball bearing with Class "A" and "E" insulation suitable for operation on 230 volts single phase 50 HZ AC supply with features for smooth & silent operation to deliver the maximum output at lower operating cost. The impeller of the Exhaust Fan is to be propeller type and both hub and impeller are to be dynamically balances and frames and arms mounted on rubber bushing so that, vibration are virtually eliminated etc. complete as required.(Make- Almonard HD (ISI) or similar superior)

Supply and fixing of 150mm sweep high suction at low noise with aerodynamically designed blades exhaust fans with copper wound motor, inbuilt back shutter having air delivery of 170 cubic meters per hour, at 1380 rpm, thermal fuse protection for overheating, plastic body suitable for kitchen/bath rooms i/c connection and testing etc. as required. (Make- USHA Crisp Air VX/Equivalent model of Havells/Bajaj/Crompton)

Supplying and installation of gravity type Aluminum/ GI louver shutters suitable for 380mm sweep exhaust fans with fastener /GI nuts and bolts etc. complete as required.

Making opening on brick wall of suitable size for fixing of 380mm sweep Exhaust Fans including making good the damages, minor civil works etc. complete as required.

MEERA ELECTRICALS (BID ID -804821)